From: Rajendra Nayak <rnayak@codeaurora.org>
To: sboyd@codeaurora.org, mturquette@baylibre.com
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
georgi.djakov@linaro.org, svarbanov@mm-sol.com,
srinivas.kandagatla@linaro.org, sviau@codeaurora.org,
Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v8 05/13] clk: qcom: gdsc: Add GDSCs in msm8916 GCC
Date: Thu, 6 Aug 2015 16:07:46 +0530 [thread overview]
Message-ID: <1438857474-20262-6-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1438857474-20262-1-git-send-email-rnayak@codeaurora.org>
Add all data for the GDSCs which are part of msm8916 GCC block.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 1 +
drivers/clk/qcom/gcc-msm8916.c | 51 ++++++++++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-msm8916.h | 8 +++++
3 files changed, 60 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index d3a695b..abec45a 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -53,6 +53,7 @@ config MSM_GCC_8660
config MSM_GCC_8916
tristate "MSM8916 Global Clock Controller"
+ select QCOM_GDSC
depends on COMMON_CLK_QCOM
help
Support for the global clock controller on msm8916 devices.
diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c
index c66f7bc..10ba745 100644
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
@@ -31,6 +31,7 @@
#include "clk-rcg.h"
#include "clk-branch.h"
#include "reset.h"
+#include "gdsc.h"
enum {
P_XO,
@@ -2562,6 +2563,46 @@ static struct clk_branch gcc_venus0_vcodec0_clk = {
},
};
+static struct gdsc venus_gdsc = {
+ .gdscr = 0x4c018,
+ .pd = {
+ .name = "venus",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mdss_gdsc = {
+ .gdscr = 0x4d078,
+ .pd = {
+ .name = "mdss",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc jpeg_gdsc = {
+ .gdscr = 0x5701c,
+ .pd = {
+ .name = "jpeg",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc vfe_gdsc = {
+ .gdscr = 0x58034,
+ .pd = {
+ .name = "vfe",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc oxili_gdsc = {
+ .gdscr = 0x5901c,
+ .pd = {
+ .name = "oxili",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
static struct clk_regmap *gcc_msm8916_clocks[] = {
[GPLL0] = &gpll0.clkr,
[GPLL0_VOTE] = &gpll0_vote,
@@ -2703,6 +2744,14 @@ static struct clk_regmap *gcc_msm8916_clocks[] = {
[GCC_VENUS0_VCODEC0_CLK] = &gcc_venus0_vcodec0_clk.clkr,
};
+static struct gdsc *gcc_msm8916_gdscs[] = {
+ [VENUS_GDSC] = &venus_gdsc,
+ [MDSS_GDSC] = &mdss_gdsc,
+ [JPEG_GDSC] = &jpeg_gdsc,
+ [VFE_GDSC] = &vfe_gdsc,
+ [OXILI_GDSC] = &oxili_gdsc,
+};
+
static const struct qcom_reset_map gcc_msm8916_resets[] = {
[GCC_BLSP1_BCR] = { 0x01000 },
[GCC_BLSP1_QUP1_BCR] = { 0x02000 },
@@ -2810,6 +2859,8 @@ static const struct qcom_cc_desc gcc_msm8916_desc = {
.num_clks = ARRAY_SIZE(gcc_msm8916_clocks),
.resets = gcc_msm8916_resets,
.num_resets = ARRAY_SIZE(gcc_msm8916_resets),
+ .gdscs = gcc_msm8916_gdscs,
+ .num_gdscs = ARRAY_SIZE(gcc_msm8916_gdscs),
};
static const struct of_device_id gcc_msm8916_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8916.h b/include/dt-bindings/clock/qcom,gcc-msm8916.h
index e430f64..11566c5 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8916.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8916.h
@@ -153,4 +153,12 @@
#define GCC_VENUS0_AXI_CLK 136
#define GCC_VENUS0_VCODEC0_CLK 137
+/* Indexes for GDSCs */
+#define BIMC_GDSC 0
+#define VENUS_GDSC 1
+#define MDSS_GDSC 2
+#define JPEG_GDSC 3
+#define VFE_GDSC 4
+#define OXILI_GDSC 5
+
#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: rnayak@codeaurora.org (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 05/13] clk: qcom: gdsc: Add GDSCs in msm8916 GCC
Date: Thu, 6 Aug 2015 16:07:46 +0530 [thread overview]
Message-ID: <1438857474-20262-6-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1438857474-20262-1-git-send-email-rnayak@codeaurora.org>
Add all data for the GDSCs which are part of msm8916 GCC block.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 1 +
drivers/clk/qcom/gcc-msm8916.c | 51 ++++++++++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-msm8916.h | 8 +++++
3 files changed, 60 insertions(+)
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index d3a695b..abec45a 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -53,6 +53,7 @@ config MSM_GCC_8660
config MSM_GCC_8916
tristate "MSM8916 Global Clock Controller"
+ select QCOM_GDSC
depends on COMMON_CLK_QCOM
help
Support for the global clock controller on msm8916 devices.
diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c
index c66f7bc..10ba745 100644
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
@@ -31,6 +31,7 @@
#include "clk-rcg.h"
#include "clk-branch.h"
#include "reset.h"
+#include "gdsc.h"
enum {
P_XO,
@@ -2562,6 +2563,46 @@ static struct clk_branch gcc_venus0_vcodec0_clk = {
},
};
+static struct gdsc venus_gdsc = {
+ .gdscr = 0x4c018,
+ .pd = {
+ .name = "venus",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mdss_gdsc = {
+ .gdscr = 0x4d078,
+ .pd = {
+ .name = "mdss",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc jpeg_gdsc = {
+ .gdscr = 0x5701c,
+ .pd = {
+ .name = "jpeg",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc vfe_gdsc = {
+ .gdscr = 0x58034,
+ .pd = {
+ .name = "vfe",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc oxili_gdsc = {
+ .gdscr = 0x5901c,
+ .pd = {
+ .name = "oxili",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
static struct clk_regmap *gcc_msm8916_clocks[] = {
[GPLL0] = &gpll0.clkr,
[GPLL0_VOTE] = &gpll0_vote,
@@ -2703,6 +2744,14 @@ static struct clk_regmap *gcc_msm8916_clocks[] = {
[GCC_VENUS0_VCODEC0_CLK] = &gcc_venus0_vcodec0_clk.clkr,
};
+static struct gdsc *gcc_msm8916_gdscs[] = {
+ [VENUS_GDSC] = &venus_gdsc,
+ [MDSS_GDSC] = &mdss_gdsc,
+ [JPEG_GDSC] = &jpeg_gdsc,
+ [VFE_GDSC] = &vfe_gdsc,
+ [OXILI_GDSC] = &oxili_gdsc,
+};
+
static const struct qcom_reset_map gcc_msm8916_resets[] = {
[GCC_BLSP1_BCR] = { 0x01000 },
[GCC_BLSP1_QUP1_BCR] = { 0x02000 },
@@ -2810,6 +2859,8 @@ static const struct qcom_cc_desc gcc_msm8916_desc = {
.num_clks = ARRAY_SIZE(gcc_msm8916_clocks),
.resets = gcc_msm8916_resets,
.num_resets = ARRAY_SIZE(gcc_msm8916_resets),
+ .gdscs = gcc_msm8916_gdscs,
+ .num_gdscs = ARRAY_SIZE(gcc_msm8916_gdscs),
};
static const struct of_device_id gcc_msm8916_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8916.h b/include/dt-bindings/clock/qcom,gcc-msm8916.h
index e430f64..11566c5 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8916.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8916.h
@@ -153,4 +153,12 @@
#define GCC_VENUS0_AXI_CLK 136
#define GCC_VENUS0_VCODEC0_CLK 137
+/* Indexes for GDSCs */
+#define BIMC_GDSC 0
+#define VENUS_GDSC 1
+#define MDSS_GDSC 2
+#define JPEG_GDSC 3
+#define VFE_GDSC 4
+#define OXILI_GDSC 5
+
#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2015-08-06 10:39 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-06 10:37 [PATCH v8 00/13] qcom: Add support for GDSCs Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-06 10:37 ` [PATCH v8 01/13] clk: " Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 02/13] clk: qcom: gdsc: Prepare common clk probe to register gdscs Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 03/13] clk: qcom: gdsc: Add support for Memory RET/OFF Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 04/13] clk: qcom: gdsc: Add support for ON only state Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` Rajendra Nayak [this message]
2015-08-06 10:37 ` [PATCH v8 05/13] clk: qcom: gdsc: Add GDSCs in msm8916 GCC Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 06/13] clk: qcom: gdsc: Add GDSCs in msm8974 GCC Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 07/13] clk: qcom: gdsc: Add GDSCs in msm8974 MMCC Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:59 ` Stephen Boyd
2015-08-11 6:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 08/13] clk: qcom: gdsc: Add GDSCs in apq8084 GCC Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 7:01 ` Stephen Boyd
2015-08-11 7:01 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 09/13] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 7:02 ` Stephen Boyd
2015-08-11 7:02 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 10/13] arm: dts: qcom: Add #power-domain-cells property Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:53 ` Stephen Boyd
2015-08-11 6:53 ` Stephen Boyd
2015-08-13 4:24 ` Rajendra Nayak
2015-08-13 4:24 ` Rajendra Nayak
2015-08-14 1:44 ` Stephen Boyd
2015-08-14 1:44 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 11/13] clk: qcom: gdsc: Use PM clocks to control gdsc clocks Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-11 6:52 ` Stephen Boyd
2015-08-11 6:52 ` Stephen Boyd
2015-08-13 4:23 ` Rajendra Nayak
2015-08-13 4:23 ` Rajendra Nayak
2015-11-27 8:29 ` Rajendra Nayak
2015-11-27 8:29 ` Rajendra Nayak
2015-12-01 8:59 ` Stephen Boyd
2015-12-01 8:59 ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 12/13] clk: qcom: gdsc: Enable an RCG before turing on the gdsc Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
2015-08-06 10:37 ` [PATCH v8 13/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM Rajendra Nayak
2015-08-06 10:37 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438857474-20262-6-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=georgi.djakov@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=svarbanov@mm-sol.com \
--cc=sviau@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.