From: Ian Campbell <ijc@hellion.org.uk>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 04/15] sunxi_nand_spl: Do not bother writing the spare-area reg in syndrome mode
Date: Mon, 17 Aug 2015 09:19:36 +0100 [thread overview]
Message-ID: <1439799576.3480.55.camel@hellion.org.uk> (raw)
In-Reply-To: <1439668968-3882-5-git-send-email-hdegoede@redhat.com>
On Sat, 2015-08-15 at 22:02 +0200, Hans de Goede wrote:
> In syndrome mode we set the NFC_SEQ bit in the command register, so the
> spare-area register is not used. Also the value currently being written is
> actual wrong, the ecc sits at "column + CONFIG_NAND_SUNXI_SPL_ECC_PAGE_SIZE"
> not just CONFIG_NAND_SUNXI_SPL_ECC_PAGE_SIZE.
>
> So the current code only serves to confuse the user -> remove it.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There's a bunch of other uses of the syndrome parameter in this
function. Does syndrome=true work even without this particular bit of
code?
I suppose I'm asking, should the paramter and the other uses be
removed? Or should an ASSERT(!syndrome) be added, or am I worrying
about nothing and everything is just fine as it is after this patch?
I suspect the latter, so if that is indeed the case:
Acked-by: Ian Campbell < ijc@hellion.org.uk >
next prev parent reply other threads:[~2015-08-17 8:19 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-15 20:02 [U-Boot] [PATCH 00/15] sunxi_nand_spl: cleanups, auto config and bad block handling Hans de Goede
2015-08-15 20:02 ` [U-Boot] [PATCH 01/15] sunxi_nand_spl: Fix CONFIG_SPL_NAND_SUNXI handling Hans de Goede
2015-08-17 8:11 ` Ian Campbell
2015-08-19 13:45 ` Maxime Ripard
2015-08-20 6:33 ` Hans de Goede
2015-08-27 12:36 ` Maxime Ripard
2015-08-15 20:02 ` [U-Boot] [PATCH 02/15] sunxi_nand_spl: Drop unnecessary temp buf Hans de Goede
2015-08-17 7:22 ` Chen-Yu Tsai
2015-08-17 8:14 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 03/15] sunxi_nand_spl: We only need to reset the nand chip once Hans de Goede
2015-08-17 8:14 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 04/15] sunxi_nand_spl: Do not bother writing the spare-area reg in syndrome mode Hans de Goede
2015-08-17 8:19 ` Ian Campbell [this message]
2015-08-17 8:59 ` Hans de Goede
2015-08-17 11:28 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 05/15] sunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do nand init when necessary Hans de Goede
2015-08-17 8:20 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 06/15] sunxi_nand_spl: Make sure the DMA controller is enabled Hans de Goede
2015-08-17 8:21 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 07/15] sunxi_nand_spl: Turn off clocks when we're done with the nand Hans de Goede
2015-08-17 8:22 ` Ian Campbell
2015-08-19 13:48 ` Maxime Ripard
2015-08-20 6:35 ` Hans de Goede
2015-08-24 14:54 ` Maxime Ripard
2015-08-15 20:02 ` [U-Boot] [PATCH 08/15] sunxi_nand_spl: Add proper cache flusing Hans de Goede
2015-08-17 8:22 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 09/15] sunxi_nand_spl: Use kernel driver algorithm for determining ecc_mode / _off Hans de Goede
2015-08-17 8:24 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 10/15] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END Hans de Goede
2015-08-17 8:27 ` Ian Campbell
2015-08-17 9:05 ` Hans de Goede
2015-08-15 20:02 ` [U-Boot] [PATCH 11/15] sunxi_nand_spl: Add support for sun4i and sun5i SoCs Hans de Goede
2015-08-17 8:29 ` Ian Campbell
2015-08-17 8:31 ` Hans de Goede
2015-08-17 8:35 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 12/15] sunxi_nand_spl: Properly config page-size in the nand ctl register Hans de Goede
2015-08-17 8:29 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 13/15] sunxi_nand_spl: Parametrize lowlevel read functions Hans de Goede
2015-08-17 8:31 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 14/15] sunxi_nand_spl: Auto detect nand configuration parameters Hans de Goede
2015-08-17 8:32 ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 15/15] sunxi_nand_spl: Add support for backup boot partitions Hans de Goede
2015-08-17 8:34 ` Ian Campbell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439799576.3480.55.camel@hellion.org.uk \
--to=ijc@hellion.org.uk \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.