All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Andy Gross <agross@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] arm64: dts: qcom: Add pm8994, pmi8994, pm8004 PMIC skeletons
Date: Tue, 17 Nov 2015 17:12:28 -0800	[thread overview]
Message-ID: <1447809149-29724-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1447809149-29724-1-git-send-email-sboyd@codeaurora.org>

Add the skeleton nodes for the PMICs found on msm8996-mtp
devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pm8004.dtsi  | 19 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8994.dtsi  | 19 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/pmi8994.dtsi | 19 +++++++++++++++++++
 3 files changed, 57 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8004.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm8994.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pmi8994.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi
new file mode 100644
index 000000000000..ef2207afa86b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@4 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@5 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
new file mode 100644
index 000000000000..e61b376f0b7c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
new file mode 100644
index 000000000000..d3879a4e8076
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@2 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] arm64: dts: qcom: Add pm8994, pmi8994, pm8004 PMIC skeletons
Date: Tue, 17 Nov 2015 17:12:28 -0800	[thread overview]
Message-ID: <1447809149-29724-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1447809149-29724-1-git-send-email-sboyd@codeaurora.org>

Add the skeleton nodes for the PMICs found on msm8996-mtp
devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pm8004.dtsi  | 19 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8994.dtsi  | 19 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/pmi8994.dtsi | 19 +++++++++++++++++++
 3 files changed, 57 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8004.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm8994.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pmi8994.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi
new file mode 100644
index 000000000000..ef2207afa86b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic at 4 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic at 5 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
new file mode 100644
index 000000000000..e61b376f0b7c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic at 0 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic at 1 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
new file mode 100644
index 000000000000..d3879a4e8076
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic at 2 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic at 3 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2015-11-18  1:12 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-18  1:12 [PATCH 0/4] Add DTS for MSM8996 SoC and MTP Stephen Boyd
2015-11-18  1:12 ` Stephen Boyd
2015-11-18  1:12 ` [PATCH 1/4] devicetree: bindings: Document Kryo cpu Stephen Boyd
2015-11-18  1:12   ` Stephen Boyd
     [not found]   ` <1447809149-29724-2-git-send-email-sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-11-18 23:07     ` Rob Herring
2015-11-18 23:07       ` Rob Herring
2015-11-18 23:07       ` Rob Herring
2015-11-18  1:12 ` [PATCH 2/4] arm64: dts: Add msm8996 SoC and MTP board support Stephen Boyd
2015-11-18  1:12   ` Stephen Boyd
2015-11-18  5:06   ` kbuild test robot
2015-11-18  5:06     ` kbuild test robot
2015-11-18 19:24     ` Stephen Boyd
2015-11-18 19:24       ` Stephen Boyd
2015-11-23  9:12   ` Rajendra Nayak
2015-11-23  9:12     ` Rajendra Nayak
2015-11-24  0:43     ` Stephen Boyd
2015-11-24  0:43       ` Stephen Boyd
2015-11-18  1:12 ` Stephen Boyd [this message]
2015-11-18  1:12   ` [PATCH 3/4] arm64: dts: qcom: Add pm8994, pmi8994, pm8004 PMIC skeletons Stephen Boyd
2015-11-18  1:12 ` [PATCH 4/4] arm64: dts: qcom: Add pm8994 gpios and MPPs Stephen Boyd
2015-11-18  1:12   ` Stephen Boyd
2015-11-18  1:12   ` Stephen Boyd
2015-11-18  4:13 ` [PATCH 0/4] Add DTS for MSM8996 SoC and MTP Andy Gross
2015-11-18  4:13   ` Andy Gross

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447809149-29724-4-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=agross@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.