From: Stephen Boyd <sboyd@codeaurora.org>
To: Andy Gross <agross@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] arm64: dts: qcom: Add pm8994 gpios and MPPs
Date: Tue, 17 Nov 2015 17:12:29 -0800 [thread overview]
Message-ID: <1447809149-29724-5-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1447809149-29724-1-git-send-email-sboyd@codeaurora.org>
Add the gpio and MPP devices to the pm8994 pmic dts.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm64/boot/dts/qcom/pm8994.dtsi | 43 ++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index e61b376f0b7c..1732f1d32f4c 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -8,6 +8,49 @@
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8994_gpios: gpios@c000 {
+ compatible = "qcom,pm8994-gpio";
+ reg = <0xc000 0x1500>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>,
+ <0 0xce 0 IRQ_TYPE_NONE>,
+ <0 0xd0 0 IRQ_TYPE_NONE>,
+ <0 0xd1 0 IRQ_TYPE_NONE>,
+ <0 0xd2 0 IRQ_TYPE_NONE>,
+ <0 0xd3 0 IRQ_TYPE_NONE>,
+ <0 0xd4 0 IRQ_TYPE_NONE>,
+ <0 0xd5 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8994_mpps: mpps@a000 {
+ compatible = "qcom,pm8994-mpp";
+ reg = <0xa000 0x700>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>,
+ <0 0xa4 0 IRQ_TYPE_NONE>,
+ <0 0xa5 0 IRQ_TYPE_NONE>,
+ <0 0xa6 0 IRQ_TYPE_NONE>,
+ <0 0xa7 0 IRQ_TYPE_NONE>;
+ };
};
pmic@1 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] arm64: dts: qcom: Add pm8994 gpios and MPPs
Date: Tue, 17 Nov 2015 17:12:29 -0800 [thread overview]
Message-ID: <1447809149-29724-5-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1447809149-29724-1-git-send-email-sboyd@codeaurora.org>
Add the gpio and MPP devices to the pm8994 pmic dts.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm64/boot/dts/qcom/pm8994.dtsi | 43 ++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index e61b376f0b7c..1732f1d32f4c 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -8,6 +8,49 @@
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8994_gpios: gpios at c000 {
+ compatible = "qcom,pm8994-gpio";
+ reg = <0xc000 0x1500>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>,
+ <0 0xce 0 IRQ_TYPE_NONE>,
+ <0 0xd0 0 IRQ_TYPE_NONE>,
+ <0 0xd1 0 IRQ_TYPE_NONE>,
+ <0 0xd2 0 IRQ_TYPE_NONE>,
+ <0 0xd3 0 IRQ_TYPE_NONE>,
+ <0 0xd4 0 IRQ_TYPE_NONE>,
+ <0 0xd5 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8994_mpps: mpps at a000 {
+ compatible = "qcom,pm8994-mpp";
+ reg = <0xa000 0x700>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>,
+ <0 0xa4 0 IRQ_TYPE_NONE>,
+ <0 0xa5 0 IRQ_TYPE_NONE>,
+ <0 0xa6 0 IRQ_TYPE_NONE>,
+ <0 0xa7 0 IRQ_TYPE_NONE>;
+ };
};
pmic at 1 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Boyd <sboyd@codeaurora.org>
To: Andy Gross <agross@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] arm64: dts: qcom: Add pm8994 gpios and MPPs
Date: Tue, 17 Nov 2015 17:12:29 -0800 [thread overview]
Message-ID: <1447809149-29724-5-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1447809149-29724-1-git-send-email-sboyd@codeaurora.org>
Add the gpio and MPP devices to the pm8994 pmic dts.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm64/boot/dts/qcom/pm8994.dtsi | 43 ++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index e61b376f0b7c..1732f1d32f4c 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -8,6 +8,49 @@
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
+
+ pm8994_gpios: gpios@c000 {
+ compatible = "qcom,pm8994-gpio";
+ reg = <0xc000 0x1500>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>,
+ <0 0xce 0 IRQ_TYPE_NONE>,
+ <0 0xd0 0 IRQ_TYPE_NONE>,
+ <0 0xd1 0 IRQ_TYPE_NONE>,
+ <0 0xd2 0 IRQ_TYPE_NONE>,
+ <0 0xd3 0 IRQ_TYPE_NONE>,
+ <0 0xd4 0 IRQ_TYPE_NONE>,
+ <0 0xd5 0 IRQ_TYPE_NONE>;
+ };
+
+ pm8994_mpps: mpps@a000 {
+ compatible = "qcom,pm8994-mpp";
+ reg = <0xa000 0x700>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>,
+ <0 0xa4 0 IRQ_TYPE_NONE>,
+ <0 0xa5 0 IRQ_TYPE_NONE>,
+ <0 0xa6 0 IRQ_TYPE_NONE>,
+ <0 0xa7 0 IRQ_TYPE_NONE>;
+ };
};
pmic@1 {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2015-11-18 1:12 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-18 1:12 [PATCH 0/4] Add DTS for MSM8996 SoC and MTP Stephen Boyd
2015-11-18 1:12 ` Stephen Boyd
2015-11-18 1:12 ` [PATCH 1/4] devicetree: bindings: Document Kryo cpu Stephen Boyd
2015-11-18 1:12 ` Stephen Boyd
[not found] ` <1447809149-29724-2-git-send-email-sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-11-18 23:07 ` Rob Herring
2015-11-18 23:07 ` Rob Herring
2015-11-18 23:07 ` Rob Herring
2015-11-18 1:12 ` [PATCH 2/4] arm64: dts: Add msm8996 SoC and MTP board support Stephen Boyd
2015-11-18 1:12 ` Stephen Boyd
2015-11-18 5:06 ` kbuild test robot
2015-11-18 5:06 ` kbuild test robot
2015-11-18 19:24 ` Stephen Boyd
2015-11-18 19:24 ` Stephen Boyd
2015-11-23 9:12 ` Rajendra Nayak
2015-11-23 9:12 ` Rajendra Nayak
2015-11-24 0:43 ` Stephen Boyd
2015-11-24 0:43 ` Stephen Boyd
2015-11-18 1:12 ` [PATCH 3/4] arm64: dts: qcom: Add pm8994, pmi8994, pm8004 PMIC skeletons Stephen Boyd
2015-11-18 1:12 ` Stephen Boyd
2015-11-18 1:12 ` Stephen Boyd [this message]
2015-11-18 1:12 ` [PATCH 4/4] arm64: dts: qcom: Add pm8994 gpios and MPPs Stephen Boyd
2015-11-18 1:12 ` Stephen Boyd
2015-11-18 4:13 ` [PATCH 0/4] Add DTS for MSM8996 SoC and MTP Andy Gross
2015-11-18 4:13 ` Andy Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447809149-29724-5-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.