All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] usb: add support for generic EHCI devices
Date: Fri, 20 Nov 2015 20:28:56 +0000	[thread overview]
Message-ID: <1448051336.2964.1.camel@synopsys.com> (raw)
In-Reply-To: <1447860381-2645-1-git-send-email-abrodkin@synopsys.com>

Hi Simon, Marek,

On Wed, 2015-11-18 at 18:26 +0300, Alexey Brodkin wrote:
> This driver is meant to be used with any EHCI-compatible host
> controller in case if there's no need for platform-specific
> glue such as setup of controller or PHY's power mode via
> GPIOs etc.
> 
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Reviewed-by: Marek Vasut <marex@denx.de>
> Cc: Stephen Warren <swarren@nvidia.com>
> ---
> 
> Changes compared to v1:
>  * Updated commit message with removal of Synopsys board mention
>  * Cleaned-up ehci_usb_remove()
> 
>  drivers/usb/host/Kconfig        |  7 ++++++
>  drivers/usb/host/Makefile       |  1 +
>  drivers/usb/host/ehci-generic.c | 51 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 59 insertions(+)
>  create mode 100644 drivers/usb/host/ehci-generic.c
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 2a2bffe..a500578 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -73,4 +73,11 @@ config USB_EHCI_UNIPHIER
>  	---help---
>  	  Enables support for the on-chip EHCI controller on UniPhier SoCs.
>  
> +config USB_EHCI_GENERIC
> +	bool "Support for generic EHCI USB controller"
> +	depends on OF_CONTROL
> +	default y
> +	---help---
> +	  Enables support for generic EHCI controller.
> +
>  endif
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index f70f38c..b9b4471 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -32,6 +32,7 @@ else
>  obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
>  endif
>  obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
> +obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o
>  obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
>  obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
>  obj-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
> diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c
> new file mode 100644
> index 0000000..f0e2b85
> --- /dev/null
> +++ b/drivers/usb/host/ehci-generic.c
> @@ -0,0 +1,51 @@
> +/*
> + * Copyright (C) 2015 Alexey Brodkin <abrodkin@synopsys.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include "ehci.h"
> +
> +/*
> + * Even though here we don't explicitly use "struct ehci_ctrl"
> + * ehci_register() expects it to be the first thing that resides in
> + * device's private data.
> + */
> +struct generic_ehci {
> +	struct ehci_ctrl ctrl;
> +};
> +
> +static int ehci_usb_probe(struct udevice *dev)
> +{
> +	struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev);
> +	struct ehci_hcor *hcor;
> +
> +	hcor = (struct ehci_hcor *)((uint32_t)hccr +
> +				    HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> +	return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
> +}
> +
> +static int ehci_usb_remove(struct udevice *dev)
> +{
> +	return ehci_deregister(dev);
> +}
> +
> +static const struct udevice_id ehci_usb_ids[] = {
> +	{ .compatible = "generic-ehci" },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(usb_ehci) = {
> +	.name	= "ehci_generic",
> +	.id	= UCLASS_USB,
> +	.of_match = ehci_usb_ids,
> +	.probe = ehci_usb_probe,
> +	.remove = ehci_usb_remove,
> +	.ops	= &ehci_usb_ops,
> +	.priv_auto_alloc_size = sizeof(struct generic_ehci),
> +	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
> +};
> +

Any comments on that one or there's a chance it could be applied?

-Alexey

  reply	other threads:[~2015-11-20 20:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-18 15:26 [U-Boot] [PATCH v2] usb: add support for generic EHCI devices Alexey Brodkin
2015-11-20 20:28 ` Alexey Brodkin [this message]
2015-11-20 20:38 ` Simon Glass
2015-11-20 20:47   ` Marek Vasut
2015-11-20 20:48 ` Marek Vasut
2015-11-20 21:28   ` Alexey Brodkin
2015-11-20 22:32     ` Marek Vasut
2015-11-30 11:10   ` Alexey Brodkin
2015-11-30 12:34     ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1448051336.2964.1.camel@synopsys.com \
    --to=alexey.brodkin@synopsys.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.