[U-Boot] [PATCH v2] usb: add support for generic EHCI devices

[Marek Vasut <marex@denx.de>]

On Monday, November 30, 2015 at 12:10:23 PM, Alexey Brodkin wrote:
> Hi Marek,
> 
> On Fri, 2015-11-20 at 21:48 +0100, Marek Vasut wrote:
> > On Wednesday, November 18, 2015 at 04:26:21 PM, Alexey Brodkin wrote:
> > > This driver is meant to be used with any EHCI-compatible host
> > > controller in case if there's no need for platform-specific
> > > glue such as setup of controller or PHY's power mode via
> > > GPIOs etc.
> > > 
> > > Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> > > Reviewed-by: Simon Glass <sjg@chromium.org>
> > > Reviewed-by: Marek Vasut <marex@denx.de>
> > > Cc: Stephen Warren <swarren@nvidia.com>
> > > ---
> > > 
> > > Changes compared to v1:
> > >  * Updated commit message with removal of Synopsys board mention
> > >  * Cleaned-up ehci_usb_remove()
> > 
> > [...]
> > 
> > > +static int ehci_usb_probe(struct udevice *dev)
> > > +{
> > > +	struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev);
> > > +	struct ehci_hcor *hcor;
> > > +
> > > +	hcor = (struct ehci_hcor *)((uint32_t)hccr +
> > 
> > This should be uintptr_t for the sake of 64bit systems, no ?
> > 
> > > +				    HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> > > +
> > > +	return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
> > > +}
> > 
> > I can fix that nit when applying, so let me know what you think please.
> 
> Could you please do that fix and apply the patch?

Done and applied, thanks!

Best regards,
Marek Vasut