From: andriy.shevchenko@linux.intel.com (Andy Shevchenko)
To: linux-snps-arc@lists.infradead.org
Subject: [PATCH 07/15] dmaengine: dw: revisit data_width property
Date: Mon, 25 Jan 2016 10:42:21 +0200 [thread overview]
Message-ID: <1453711341.2521.206.camel@linux.intel.com> (raw)
In-Reply-To: <1453663322-14474-8-git-send-email-mans@mansr.com>
On Sun, 2016-01-24@19:21 +0000, Mans Rullgard wrote:
> From: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
>
> There are several changes are done here:
>
> ?- Convert the property to be in bytes
>
> ???Much more convenient than keeping encoded value.
>
> ?- Use one value for all AHB masters for now
>
> ???It seems in practice we have no controllers where masters have
> different
> ???data bus width, we still might return to distinct values when
> there is a use
> ???case.
>
> ?- Rename data_width to data-width in the device tree bindings.
>
> ?- While here, replace dwc_fast_ffs() by __ffs().
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
> Signed-off-by: Mans Rullgard <mans at mansr.com>
> ---
> This patch changes the DT binding, so it should probably be amended
> for
> compatibility with old device trees.??I've included it as is since I
> think
> the change as such is good.
So, since all users have at least one master defined, we may easily to
use similar line for old DT variable
if (!of_property_read_u32(np, "data_width", &tmp)) /* removeme: old */
pdata->data_width = tmp;
else if (!of_property_read_u32(np, "data-
width", &tmp)) /* removeme: new */
pdata->data_width = tmp;
I any case Viresh might comment on this since it was his code regarding
to support SPEAr SoCs.
> ---
> ?Documentation/devicetree/bindings/dma/snps-dma.txt |??5 ++-
> ?arch/arc/boot/dts/abilis_tb10x.dtsi????????????????|??2 +-
> ?arch/arm/boot/dts/spear13xx.dtsi???????????????????|??4 +--
> ?drivers/dma/dw/core.c??????????????????????????????| 40 +++---------
> ----------
> ?drivers/dma/dw/platform.c??????????????????????????|??8 ++---
> ?drivers/dma/dw/regs.h??????????????????????????????|??2 +-
> ?include/linux/platform_data/dma-dw.h???????????????|??5 ++-
> ?7 files changed, 16 insertions(+), 50 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt
> b/Documentation/devicetree/bindings/dma/snps-dma.txt
> index c99c1ffac199..fe7f7710a6b4 100644
> --- a/Documentation/devicetree/bindings/dma/snps-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
> @@ -13,8 +13,7 @@ Required properties:
> ?- chan_priority: priority of channels. 0 (default): increase from
> chan 0->n, 1:
> ???increase from chan n->0
> ?- block_size: Maximum block size supported by the controller
> -- data_width: Maximum data width supported by hardware per AHB
> master
> -??(0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
> +- data-width: Maximum data width supported by hardware (in bytes)
> ?
> ?
> ?Optional properties:
> @@ -38,7 +37,7 @@ Example:
> ? chan_allocation_order = <1>;
> ? chan_priority = <1>;
> ? block_size = <0xfff>;
> - data_width = <3 3>;
> + data-width = <8>;
> ? };
> ?
> ?DMA clients connected to the Designware DMA controller must use the
> format
> diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi
> b/arch/arc/boot/dts/abilis_tb10x.dtsi
> index cfb5052239a1..2f53bedb0cde 100644
> --- a/arch/arc/boot/dts/abilis_tb10x.dtsi
> +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
> @@ -112,7 +112,7 @@
> ? chan_allocation_order = <0>;
> ? chan_priority = <1>;
> ? block_size = <0x7ff>;
> - data_width = <2>;
> + data-width = <4>;
> ? clocks = <&ahb_clk>;
> ? clock-names = "hclk";
> ? };
> diff --git a/arch/arm/boot/dts/spear13xx.dtsi
> b/arch/arm/boot/dts/spear13xx.dtsi
> index 14594ce8c18a..474b66fa6a32 100644
> --- a/arch/arm/boot/dts/spear13xx.dtsi
> +++ b/arch/arm/boot/dts/spear13xx.dtsi
> @@ -117,7 +117,7 @@
> ? chan_priority = <1>;
> ? block_size = <0xfff>;
> ? dma-masters = <2>;
> - data_width = <3 3>;
> + data-width = <8>;
> ? };
> ?
> ? dma at eb000000 {
> @@ -133,7 +133,7 @@
> ? chan_allocation_order = <1>;
> ? chan_priority = <1>;
> ? block_size = <0xfff>;
> - data_width = <3 3>;
> + data-width = <8>;
> ? };
> ?
> ? fsmc: flash at b0000000 {
> diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
> index 140ea59ec882..28278e4c77ad 100644
> --- a/drivers/dma/dw/core.c
> +++ b/drivers/dma/dw/core.c
> @@ -168,21 +168,6 @@ static void dwc_initialize(struct dw_dma_chan
> *dwc)
> ?
> ?/*----------------------------------------------------------------
> ------*/
> ?
> -static inline unsigned int dwc_fast_ffs(unsigned long long v)
> -{
> - /*
> - ?* We can be a lot more clever here, but this should take
> care
> - ?* of the most common optimization.
> - ?*/
> - if (!(v & 7))
> - return 3;
> - else if (!(v & 3))
> - return 2;
> - else if (!(v & 1))
> - return 1;
> - return 0;
> -}
> -
> ?static inline void dwc_dump_chan_regs(struct dw_dma_chan *dwc)
> ?{
> ? dev_err(chan2dev(&dwc->chan),
> @@ -712,7 +697,6 @@ dwc_prep_dma_memcpy(struct dma_chan *chan,
> dma_addr_t dest, dma_addr_t src,
> ? size_t offset;
> ? unsigned int src_width;
> ? unsigned int dst_width;
> - unsigned int data_width;
> ? u32 ctllo;
> ?
> ? dev_vdbg(chan2dev(chan),
> @@ -726,10 +710,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan,
> dma_addr_t dest, dma_addr_t src,
> ?
> ? dwc->direction = DMA_MEM_TO_MEM;
> ?
> - data_width = dw->data_width[dwc->m_master];
> -
> - src_width = dst_width = min_t(unsigned int, data_width,
> - ??????dwc_fast_ffs(src | dest |
> len));
> + src_width = dst_width = __ffs(dw->data_width | src | dest |
> len);
> ?
> ? ctllo = DWC_DEFAULT_CTLLO(chan)
> ? | DWC_CTLL_DST_WIDTH(dst_width)
> @@ -792,7 +773,6 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> ? dma_addr_t reg;
> ? unsigned int reg_width;
> ? unsigned int mem_width;
> - unsigned int data_width;
> ? unsigned int i;
> ? struct scatterlist *sg;
> ? size_t total_len = 0;
> @@ -818,8 +798,6 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> ? ctllo |= sconfig->device_fc ?
> DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
> ? DWC_CTLL_FC(DW_DMA_FC_D_M2P);
> ?
> - data_width = dw->data_width[dwc->m_master];
> -
> ? for_each_sg(sgl, sg, sg_len, i) {
> ? struct dw_desc *desc;
> ? u32 len, dlen, mem;
> @@ -827,8 +805,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> ? mem = sg_dma_address(sg);
> ? len = sg_dma_len(sg);
> ?
> - mem_width = min_t(unsigned int,
> - ??data_width,
> dwc_fast_ffs(mem | len));
> + mem_width = __ffs(dw->data_width | mem |
> len);
> ?
> ?slave_sg_todev_fill_desc:
> ? desc = dwc_desc_get(dwc);
> @@ -874,8 +851,6 @@ slave_sg_todev_fill_desc:
> ? ctllo |= sconfig->device_fc ?
> DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
> ? DWC_CTLL_FC(DW_DMA_FC_D_P2M);
> ?
> - data_width = dw->data_width[dwc->m_master];
> -
> ? for_each_sg(sgl, sg, sg_len, i) {
> ? struct dw_desc *desc;
> ? u32 len, dlen, mem;
> @@ -883,8 +858,7 @@ slave_sg_todev_fill_desc:
> ? mem = sg_dma_address(sg);
> ? len = sg_dma_len(sg);
> ?
> - mem_width = min_t(unsigned int,
> - ??data_width,
> dwc_fast_ffs(mem | len));
> + mem_width = __ffs(dw->data_width | mem |
> len);
> ?
> ?slave_sg_fromdev_fill_desc:
> ? desc = dwc_desc_get(dwc);
> @@ -1531,10 +1505,7 @@ int dw_dma_probe(struct dw_dma_chip *chip,
> struct dw_dma_platform_data *pdata)
> ? /* Get hardware configuration parameters */
> ? pdata->nr_channels = (dw_params >> DW_PARAMS_NR_CHAN
> & 7) + 1;
> ? pdata->nr_masters = (dw_params >>
> DW_PARAMS_NR_MASTER & 3) + 1;
> - for (i = 0; i < pdata->nr_masters; i++) {
> - pdata->data_width[i] =
> - (dw_params >>
> DW_PARAMS_DATA_WIDTH(i) & 3) + 2;
> - }
> + pdata->data_width = 4 << (dw_params >>
> DW_PARAMS_DATA_WIDTH(0) & 3);
> ? max_blk_size = dma_readl(dw, MAX_BLK_SIZE);
> ?
> ? /* Fill platform data with the default values */
> @@ -1556,8 +1527,7 @@ int dw_dma_probe(struct dw_dma_chip *chip,
> struct dw_dma_platform_data *pdata)
> ?
> ? /* Get hardware configuration parameters */
> ? dw->nr_masters = pdata->nr_masters;
> - for (i = 0; i < dw->nr_masters; i++)
> - dw->data_width[i] = pdata->data_width[i];
> + dw->data_width = pdata->data_width;
> ?
> ? /* Calculate all channel mask before DMA setup */
> ? dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
> diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
> index d3e1abcebd7f..89d0461f5dcc 100644
> --- a/drivers/dma/dw/platform.c
> +++ b/drivers/dma/dw/platform.c
> @@ -102,8 +102,8 @@ dw_dma_parse_dt(struct platform_device *pdev)
> ?{
> ? struct device_node *np = pdev->dev.of_node;
> ? struct dw_dma_platform_data *pdata;
> - u32 tmp, arr[DW_DMA_MAX_NR_MASTERS];
> ? u32 nr_channels;
> + u32 tmp;
> ?
> ? if (!np) {
> ? dev_err(&pdev->dev, "Missing DT data\n");
> @@ -138,10 +138,8 @@ dw_dma_parse_dt(struct platform_device *pdev)
> ? pdata->nr_masters = tmp;
> ? }
> ?
> - if (!of_property_read_u32_array(np, "data_width", arr,
> - pdata->nr_masters))
> - for (tmp = 0; tmp < pdata->nr_masters; tmp++)
> - pdata->data_width[tmp] = arr[tmp];
> + if (!of_property_read_u32(np, "data-width", &tmp))
> + pdata->data_width = tmp;
> ?
> ? return pdata;
> ?}
> diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h
> index e4b277565165..87bc97fca084 100644
> --- a/drivers/dma/dw/regs.h
> +++ b/drivers/dma/dw/regs.h
> @@ -285,7 +285,7 @@ struct dw_dma {
> ?
> ? /* hardware configuration */
> ? unsigned char nr_masters;
> - unsigned char data_width[DW_DMA_MAX_NR_MASTER
> S];
> + unsigned char data_width;
> ?};
> ?
> ?static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma
> *dw)
> diff --git a/include/linux/platform_data/dma-dw.h
> b/include/linux/platform_data/dma-dw.h
> index b881b978e486..4120a3eb71ca 100644
> --- a/include/linux/platform_data/dma-dw.h
> +++ b/include/linux/platform_data/dma-dw.h
> @@ -42,8 +42,7 @@ struct dw_dma_slave {
> ? * @chan_priority: Set channel priority increasing from 0 to 7 or 7
> to 0.
> ? * @block_size: Maximum block size supported by the controller
> ? * @nr_masters: Number of AHB masters supported by the controller
> - * @data_width: Maximum data width supported by hardware per AHB
> master
> - * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
> + * @data_width: Maximum data width supported by hardware (in bytes)
> ? */
> ?struct dw_dma_platform_data {
> ? unsigned int nr_channels;
> @@ -57,7 +56,7 @@ struct dw_dma_platform_data {
> ? unsigned char chan_priority;
> ? unsigned short block_size;
> ? unsigned char nr_masters;
> - unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
> + unsigned char data_width;
> ?};
> ?
> ?#endif /* _PLATFORM_DATA_DMA_DW_H */
--
Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Intel Finland Oy
WARNING: multiple messages have this Message-ID (diff)
From: andriy.shevchenko@linux.intel.com (Andy Shevchenko)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/15] dmaengine: dw: revisit data_width property
Date: Mon, 25 Jan 2016 10:42:21 +0200 [thread overview]
Message-ID: <1453711341.2521.206.camel@linux.intel.com> (raw)
In-Reply-To: <1453663322-14474-8-git-send-email-mans@mansr.com>
On Sun, 2016-01-24 at 19:21 +0000, Mans Rullgard wrote:
> From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>
> There are several changes are done here:
>
> ?- Convert the property to be in bytes
>
> ???Much more convenient than keeping encoded value.
>
> ?- Use one value for all AHB masters for now
>
> ???It seems in practice we have no controllers where masters have
> different
> ???data bus width, we still might return to distinct values when
> there is a use
> ???case.
>
> ?- Rename data_width to data-width in the device tree bindings.
>
> ?- While here, replace dwc_fast_ffs() by __ffs().
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Mans Rullgard <mans@mansr.com>
> ---
> This patch changes the DT binding, so it should probably be amended
> for
> compatibility with old device trees.??I've included it as is since I
> think
> the change as such is good.
So, since all users have at least one master defined, we may easily to
use similar line for old DT variable
if (!of_property_read_u32(np, "data_width", &tmp)) /* removeme: old */
pdata->data_width = tmp;
else if (!of_property_read_u32(np, "data-
width", &tmp)) /* removeme: new */
pdata->data_width = tmp;
I any case Viresh might comment on this since it was his code regarding
to support SPEAr SoCs.
> ---
> ?Documentation/devicetree/bindings/dma/snps-dma.txt |??5 ++-
> ?arch/arc/boot/dts/abilis_tb10x.dtsi????????????????|??2 +-
> ?arch/arm/boot/dts/spear13xx.dtsi???????????????????|??4 +--
> ?drivers/dma/dw/core.c??????????????????????????????| 40 +++---------
> ----------
> ?drivers/dma/dw/platform.c??????????????????????????|??8 ++---
> ?drivers/dma/dw/regs.h??????????????????????????????|??2 +-
> ?include/linux/platform_data/dma-dw.h???????????????|??5 ++-
> ?7 files changed, 16 insertions(+), 50 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt
> b/Documentation/devicetree/bindings/dma/snps-dma.txt
> index c99c1ffac199..fe7f7710a6b4 100644
> --- a/Documentation/devicetree/bindings/dma/snps-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
> @@ -13,8 +13,7 @@ Required properties:
> ?- chan_priority: priority of channels. 0 (default): increase from
> chan 0->n, 1:
> ???increase from chan n->0
> ?- block_size: Maximum block size supported by the controller
> -- data_width: Maximum data width supported by hardware per AHB
> master
> -??(0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
> +- data-width: Maximum data width supported by hardware (in bytes)
> ?
> ?
> ?Optional properties:
> @@ -38,7 +37,7 @@ Example:
> ? chan_allocation_order = <1>;
> ? chan_priority = <1>;
> ? block_size = <0xfff>;
> - data_width = <3 3>;
> + data-width = <8>;
> ? };
> ?
> ?DMA clients connected to the Designware DMA controller must use the
> format
> diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi
> b/arch/arc/boot/dts/abilis_tb10x.dtsi
> index cfb5052239a1..2f53bedb0cde 100644
> --- a/arch/arc/boot/dts/abilis_tb10x.dtsi
> +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
> @@ -112,7 +112,7 @@
> ? chan_allocation_order = <0>;
> ? chan_priority = <1>;
> ? block_size = <0x7ff>;
> - data_width = <2>;
> + data-width = <4>;
> ? clocks = <&ahb_clk>;
> ? clock-names = "hclk";
> ? };
> diff --git a/arch/arm/boot/dts/spear13xx.dtsi
> b/arch/arm/boot/dts/spear13xx.dtsi
> index 14594ce8c18a..474b66fa6a32 100644
> --- a/arch/arm/boot/dts/spear13xx.dtsi
> +++ b/arch/arm/boot/dts/spear13xx.dtsi
> @@ -117,7 +117,7 @@
> ? chan_priority = <1>;
> ? block_size = <0xfff>;
> ? dma-masters = <2>;
> - data_width = <3 3>;
> + data-width = <8>;
> ? };
> ?
> ? dma at eb000000 {
> @@ -133,7 +133,7 @@
> ? chan_allocation_order = <1>;
> ? chan_priority = <1>;
> ? block_size = <0xfff>;
> - data_width = <3 3>;
> + data-width = <8>;
> ? };
> ?
> ? fsmc: flash at b0000000 {
> diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
> index 140ea59ec882..28278e4c77ad 100644
> --- a/drivers/dma/dw/core.c
> +++ b/drivers/dma/dw/core.c
> @@ -168,21 +168,6 @@ static void dwc_initialize(struct dw_dma_chan
> *dwc)
> ?
> ?/*----------------------------------------------------------------
> ------*/
> ?
> -static inline unsigned int dwc_fast_ffs(unsigned long long v)
> -{
> - /*
> - ?* We can be a lot more clever here, but this should take
> care
> - ?* of the most common optimization.
> - ?*/
> - if (!(v & 7))
> - return 3;
> - else if (!(v & 3))
> - return 2;
> - else if (!(v & 1))
> - return 1;
> - return 0;
> -}
> -
> ?static inline void dwc_dump_chan_regs(struct dw_dma_chan *dwc)
> ?{
> ? dev_err(chan2dev(&dwc->chan),
> @@ -712,7 +697,6 @@ dwc_prep_dma_memcpy(struct dma_chan *chan,
> dma_addr_t dest, dma_addr_t src,
> ? size_t offset;
> ? unsigned int src_width;
> ? unsigned int dst_width;
> - unsigned int data_width;
> ? u32 ctllo;
> ?
> ? dev_vdbg(chan2dev(chan),
> @@ -726,10 +710,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan,
> dma_addr_t dest, dma_addr_t src,
> ?
> ? dwc->direction = DMA_MEM_TO_MEM;
> ?
> - data_width = dw->data_width[dwc->m_master];
> -
> - src_width = dst_width = min_t(unsigned int, data_width,
> - ??????dwc_fast_ffs(src | dest |
> len));
> + src_width = dst_width = __ffs(dw->data_width | src | dest |
> len);
> ?
> ? ctllo = DWC_DEFAULT_CTLLO(chan)
> ? | DWC_CTLL_DST_WIDTH(dst_width)
> @@ -792,7 +773,6 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> ? dma_addr_t reg;
> ? unsigned int reg_width;
> ? unsigned int mem_width;
> - unsigned int data_width;
> ? unsigned int i;
> ? struct scatterlist *sg;
> ? size_t total_len = 0;
> @@ -818,8 +798,6 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> ? ctllo |= sconfig->device_fc ?
> DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
> ? DWC_CTLL_FC(DW_DMA_FC_D_M2P);
> ?
> - data_width = dw->data_width[dwc->m_master];
> -
> ? for_each_sg(sgl, sg, sg_len, i) {
> ? struct dw_desc *desc;
> ? u32 len, dlen, mem;
> @@ -827,8 +805,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> ? mem = sg_dma_address(sg);
> ? len = sg_dma_len(sg);
> ?
> - mem_width = min_t(unsigned int,
> - ??data_width,
> dwc_fast_ffs(mem | len));
> + mem_width = __ffs(dw->data_width | mem |
> len);
> ?
> ?slave_sg_todev_fill_desc:
> ? desc = dwc_desc_get(dwc);
> @@ -874,8 +851,6 @@ slave_sg_todev_fill_desc:
> ? ctllo |= sconfig->device_fc ?
> DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
> ? DWC_CTLL_FC(DW_DMA_FC_D_P2M);
> ?
> - data_width = dw->data_width[dwc->m_master];
> -
> ? for_each_sg(sgl, sg, sg_len, i) {
> ? struct dw_desc *desc;
> ? u32 len, dlen, mem;
> @@ -883,8 +858,7 @@ slave_sg_todev_fill_desc:
> ? mem = sg_dma_address(sg);
> ? len = sg_dma_len(sg);
> ?
> - mem_width = min_t(unsigned int,
> - ??data_width,
> dwc_fast_ffs(mem | len));
> + mem_width = __ffs(dw->data_width | mem |
> len);
> ?
> ?slave_sg_fromdev_fill_desc:
> ? desc = dwc_desc_get(dwc);
> @@ -1531,10 +1505,7 @@ int dw_dma_probe(struct dw_dma_chip *chip,
> struct dw_dma_platform_data *pdata)
> ? /* Get hardware configuration parameters */
> ? pdata->nr_channels = (dw_params >> DW_PARAMS_NR_CHAN
> & 7) + 1;
> ? pdata->nr_masters = (dw_params >>
> DW_PARAMS_NR_MASTER & 3) + 1;
> - for (i = 0; i < pdata->nr_masters; i++) {
> - pdata->data_width[i] =
> - (dw_params >>
> DW_PARAMS_DATA_WIDTH(i) & 3) + 2;
> - }
> + pdata->data_width = 4 << (dw_params >>
> DW_PARAMS_DATA_WIDTH(0) & 3);
> ? max_blk_size = dma_readl(dw, MAX_BLK_SIZE);
> ?
> ? /* Fill platform data with the default values */
> @@ -1556,8 +1527,7 @@ int dw_dma_probe(struct dw_dma_chip *chip,
> struct dw_dma_platform_data *pdata)
> ?
> ? /* Get hardware configuration parameters */
> ? dw->nr_masters = pdata->nr_masters;
> - for (i = 0; i < dw->nr_masters; i++)
> - dw->data_width[i] = pdata->data_width[i];
> + dw->data_width = pdata->data_width;
> ?
> ? /* Calculate all channel mask before DMA setup */
> ? dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
> diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
> index d3e1abcebd7f..89d0461f5dcc 100644
> --- a/drivers/dma/dw/platform.c
> +++ b/drivers/dma/dw/platform.c
> @@ -102,8 +102,8 @@ dw_dma_parse_dt(struct platform_device *pdev)
> ?{
> ? struct device_node *np = pdev->dev.of_node;
> ? struct dw_dma_platform_data *pdata;
> - u32 tmp, arr[DW_DMA_MAX_NR_MASTERS];
> ? u32 nr_channels;
> + u32 tmp;
> ?
> ? if (!np) {
> ? dev_err(&pdev->dev, "Missing DT data\n");
> @@ -138,10 +138,8 @@ dw_dma_parse_dt(struct platform_device *pdev)
> ? pdata->nr_masters = tmp;
> ? }
> ?
> - if (!of_property_read_u32_array(np, "data_width", arr,
> - pdata->nr_masters))
> - for (tmp = 0; tmp < pdata->nr_masters; tmp++)
> - pdata->data_width[tmp] = arr[tmp];
> + if (!of_property_read_u32(np, "data-width", &tmp))
> + pdata->data_width = tmp;
> ?
> ? return pdata;
> ?}
> diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h
> index e4b277565165..87bc97fca084 100644
> --- a/drivers/dma/dw/regs.h
> +++ b/drivers/dma/dw/regs.h
> @@ -285,7 +285,7 @@ struct dw_dma {
> ?
> ? /* hardware configuration */
> ? unsigned char nr_masters;
> - unsigned char data_width[DW_DMA_MAX_NR_MASTER
> S];
> + unsigned char data_width;
> ?};
> ?
> ?static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma
> *dw)
> diff --git a/include/linux/platform_data/dma-dw.h
> b/include/linux/platform_data/dma-dw.h
> index b881b978e486..4120a3eb71ca 100644
> --- a/include/linux/platform_data/dma-dw.h
> +++ b/include/linux/platform_data/dma-dw.h
> @@ -42,8 +42,7 @@ struct dw_dma_slave {
> ? * @chan_priority: Set channel priority increasing from 0 to 7 or 7
> to 0.
> ? * @block_size: Maximum block size supported by the controller
> ? * @nr_masters: Number of AHB masters supported by the controller
> - * @data_width: Maximum data width supported by hardware per AHB
> master
> - * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
> + * @data_width: Maximum data width supported by hardware (in bytes)
> ? */
> ?struct dw_dma_platform_data {
> ? unsigned int nr_channels;
> @@ -57,7 +56,7 @@ struct dw_dma_platform_data {
> ? unsigned char chan_priority;
> ? unsigned short block_size;
> ? unsigned char nr_masters;
> - unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
> + unsigned char data_width;
> ?};
> ?
> ?#endif /* _PLATFORM_DATA_DMA_DW_H */
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Mans Rullgard <mans-2StjZFpD7GcAvxtiuMwx3w@public.gmane.org>,
Viresh Kumar <vireshk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Vineet Gupta <vgupta-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Dan Williams
<dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-snps-arc-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
Date: Mon, 25 Jan 2016 10:42:21 +0200 [thread overview]
Message-ID: <1453711341.2521.206.camel@linux.intel.com> (raw)
In-Reply-To: <1453663322-14474-8-git-send-email-mans-2StjZFpD7GcAvxtiuMwx3w@public.gmane.org>
On Sun, 2016-01-24 at 19:21 +0000, Mans Rullgard wrote:
> From: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
>
> There are several changes are done here:
>
> - Convert the property to be in bytes
>
> Much more convenient than keeping encoded value.
>
> - Use one value for all AHB masters for now
>
> It seems in practice we have no controllers where masters have
> different
> data bus width, we still might return to distinct values when
> there is a use
> case.
>
> - Rename data_width to data-width in the device tree bindings.
>
> - While here, replace dwc_fast_ffs() by __ffs().
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> Signed-off-by: Mans Rullgard <mans-2StjZFpD7GcAvxtiuMwx3w@public.gmane.org>
> ---
> This patch changes the DT binding, so it should probably be amended
> for
> compatibility with old device trees. I've included it as is since I
> think
> the change as such is good.
So, since all users have at least one master defined, we may easily to
use similar line for old DT variable
if (!of_property_read_u32(np, "data_width", &tmp)) /* removeme: old */
pdata->data_width = tmp;
else if (!of_property_read_u32(np, "data-
width", &tmp)) /* removeme: new */
pdata->data_width = tmp;
I any case Viresh might comment on this since it was his code regarding
to support SPEAr SoCs.
> ---
> Documentation/devicetree/bindings/dma/snps-dma.txt | 5 ++-
> arch/arc/boot/dts/abilis_tb10x.dtsi | 2 +-
> arch/arm/boot/dts/spear13xx.dtsi | 4 +--
> drivers/dma/dw/core.c | 40 +++---------
> ----------
> drivers/dma/dw/platform.c | 8 ++---
> drivers/dma/dw/regs.h | 2 +-
> include/linux/platform_data/dma-dw.h | 5 ++-
> 7 files changed, 16 insertions(+), 50 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt
> b/Documentation/devicetree/bindings/dma/snps-dma.txt
> index c99c1ffac199..fe7f7710a6b4 100644
> --- a/Documentation/devicetree/bindings/dma/snps-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
> @@ -13,8 +13,7 @@ Required properties:
> - chan_priority: priority of channels. 0 (default): increase from
> chan 0->n, 1:
> increase from chan n->0
> - block_size: Maximum block size supported by the controller
> -- data_width: Maximum data width supported by hardware per AHB
> master
> - (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
> +- data-width: Maximum data width supported by hardware (in bytes)
>
>
> Optional properties:
> @@ -38,7 +37,7 @@ Example:
> chan_allocation_order = <1>;
> chan_priority = <1>;
> block_size = <0xfff>;
> - data_width = <3 3>;
> + data-width = <8>;
> };
>
> DMA clients connected to the Designware DMA controller must use the
> format
> diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi
> b/arch/arc/boot/dts/abilis_tb10x.dtsi
> index cfb5052239a1..2f53bedb0cde 100644
> --- a/arch/arc/boot/dts/abilis_tb10x.dtsi
> +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
> @@ -112,7 +112,7 @@
> chan_allocation_order = <0>;
> chan_priority = <1>;
> block_size = <0x7ff>;
> - data_width = <2>;
> + data-width = <4>;
> clocks = <&ahb_clk>;
> clock-names = "hclk";
> };
> diff --git a/arch/arm/boot/dts/spear13xx.dtsi
> b/arch/arm/boot/dts/spear13xx.dtsi
> index 14594ce8c18a..474b66fa6a32 100644
> --- a/arch/arm/boot/dts/spear13xx.dtsi
> +++ b/arch/arm/boot/dts/spear13xx.dtsi
> @@ -117,7 +117,7 @@
> chan_priority = <1>;
> block_size = <0xfff>;
> dma-masters = <2>;
> - data_width = <3 3>;
> + data-width = <8>;
> };
>
> dma@eb000000 {
> @@ -133,7 +133,7 @@
> chan_allocation_order = <1>;
> chan_priority = <1>;
> block_size = <0xfff>;
> - data_width = <3 3>;
> + data-width = <8>;
> };
>
> fsmc: flash@b0000000 {
> diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
> index 140ea59ec882..28278e4c77ad 100644
> --- a/drivers/dma/dw/core.c
> +++ b/drivers/dma/dw/core.c
> @@ -168,21 +168,6 @@ static void dwc_initialize(struct dw_dma_chan
> *dwc)
>
> /*----------------------------------------------------------------
> ------*/
>
> -static inline unsigned int dwc_fast_ffs(unsigned long long v)
> -{
> - /*
> - * We can be a lot more clever here, but this should take
> care
> - * of the most common optimization.
> - */
> - if (!(v & 7))
> - return 3;
> - else if (!(v & 3))
> - return 2;
> - else if (!(v & 1))
> - return 1;
> - return 0;
> -}
> -
> static inline void dwc_dump_chan_regs(struct dw_dma_chan *dwc)
> {
> dev_err(chan2dev(&dwc->chan),
> @@ -712,7 +697,6 @@ dwc_prep_dma_memcpy(struct dma_chan *chan,
> dma_addr_t dest, dma_addr_t src,
> size_t offset;
> unsigned int src_width;
> unsigned int dst_width;
> - unsigned int data_width;
> u32 ctllo;
>
> dev_vdbg(chan2dev(chan),
> @@ -726,10 +710,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan,
> dma_addr_t dest, dma_addr_t src,
>
> dwc->direction = DMA_MEM_TO_MEM;
>
> - data_width = dw->data_width[dwc->m_master];
> -
> - src_width = dst_width = min_t(unsigned int, data_width,
> - dwc_fast_ffs(src | dest |
> len));
> + src_width = dst_width = __ffs(dw->data_width | src | dest |
> len);
>
> ctllo = DWC_DEFAULT_CTLLO(chan)
> | DWC_CTLL_DST_WIDTH(dst_width)
> @@ -792,7 +773,6 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> dma_addr_t reg;
> unsigned int reg_width;
> unsigned int mem_width;
> - unsigned int data_width;
> unsigned int i;
> struct scatterlist *sg;
> size_t total_len = 0;
> @@ -818,8 +798,6 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> ctllo |= sconfig->device_fc ?
> DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
> DWC_CTLL_FC(DW_DMA_FC_D_M2P);
>
> - data_width = dw->data_width[dwc->m_master];
> -
> for_each_sg(sgl, sg, sg_len, i) {
> struct dw_desc *desc;
> u32 len, dlen, mem;
> @@ -827,8 +805,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> mem = sg_dma_address(sg);
> len = sg_dma_len(sg);
>
> - mem_width = min_t(unsigned int,
> - data_width,
> dwc_fast_ffs(mem | len));
> + mem_width = __ffs(dw->data_width | mem |
> len);
>
> slave_sg_todev_fill_desc:
> desc = dwc_desc_get(dwc);
> @@ -874,8 +851,6 @@ slave_sg_todev_fill_desc:
> ctllo |= sconfig->device_fc ?
> DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
> DWC_CTLL_FC(DW_DMA_FC_D_P2M);
>
> - data_width = dw->data_width[dwc->m_master];
> -
> for_each_sg(sgl, sg, sg_len, i) {
> struct dw_desc *desc;
> u32 len, dlen, mem;
> @@ -883,8 +858,7 @@ slave_sg_todev_fill_desc:
> mem = sg_dma_address(sg);
> len = sg_dma_len(sg);
>
> - mem_width = min_t(unsigned int,
> - data_width,
> dwc_fast_ffs(mem | len));
> + mem_width = __ffs(dw->data_width | mem |
> len);
>
> slave_sg_fromdev_fill_desc:
> desc = dwc_desc_get(dwc);
> @@ -1531,10 +1505,7 @@ int dw_dma_probe(struct dw_dma_chip *chip,
> struct dw_dma_platform_data *pdata)
> /* Get hardware configuration parameters */
> pdata->nr_channels = (dw_params >> DW_PARAMS_NR_CHAN
> & 7) + 1;
> pdata->nr_masters = (dw_params >>
> DW_PARAMS_NR_MASTER & 3) + 1;
> - for (i = 0; i < pdata->nr_masters; i++) {
> - pdata->data_width[i] =
> - (dw_params >>
> DW_PARAMS_DATA_WIDTH(i) & 3) + 2;
> - }
> + pdata->data_width = 4 << (dw_params >>
> DW_PARAMS_DATA_WIDTH(0) & 3);
> max_blk_size = dma_readl(dw, MAX_BLK_SIZE);
>
> /* Fill platform data with the default values */
> @@ -1556,8 +1527,7 @@ int dw_dma_probe(struct dw_dma_chip *chip,
> struct dw_dma_platform_data *pdata)
>
> /* Get hardware configuration parameters */
> dw->nr_masters = pdata->nr_masters;
> - for (i = 0; i < dw->nr_masters; i++)
> - dw->data_width[i] = pdata->data_width[i];
> + dw->data_width = pdata->data_width;
>
> /* Calculate all channel mask before DMA setup */
> dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
> diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
> index d3e1abcebd7f..89d0461f5dcc 100644
> --- a/drivers/dma/dw/platform.c
> +++ b/drivers/dma/dw/platform.c
> @@ -102,8 +102,8 @@ dw_dma_parse_dt(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> struct dw_dma_platform_data *pdata;
> - u32 tmp, arr[DW_DMA_MAX_NR_MASTERS];
> u32 nr_channels;
> + u32 tmp;
>
> if (!np) {
> dev_err(&pdev->dev, "Missing DT data\n");
> @@ -138,10 +138,8 @@ dw_dma_parse_dt(struct platform_device *pdev)
> pdata->nr_masters = tmp;
> }
>
> - if (!of_property_read_u32_array(np, "data_width", arr,
> - pdata->nr_masters))
> - for (tmp = 0; tmp < pdata->nr_masters; tmp++)
> - pdata->data_width[tmp] = arr[tmp];
> + if (!of_property_read_u32(np, "data-width", &tmp))
> + pdata->data_width = tmp;
>
> return pdata;
> }
> diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h
> index e4b277565165..87bc97fca084 100644
> --- a/drivers/dma/dw/regs.h
> +++ b/drivers/dma/dw/regs.h
> @@ -285,7 +285,7 @@ struct dw_dma {
>
> /* hardware configuration */
> unsigned char nr_masters;
> - unsigned char data_width[DW_DMA_MAX_NR_MASTER
> S];
> + unsigned char data_width;
> };
>
> static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma
> *dw)
> diff --git a/include/linux/platform_data/dma-dw.h
> b/include/linux/platform_data/dma-dw.h
> index b881b978e486..4120a3eb71ca 100644
> --- a/include/linux/platform_data/dma-dw.h
> +++ b/include/linux/platform_data/dma-dw.h
> @@ -42,8 +42,7 @@ struct dw_dma_slave {
> * @chan_priority: Set channel priority increasing from 0 to 7 or 7
> to 0.
> * @block_size: Maximum block size supported by the controller
> * @nr_masters: Number of AHB masters supported by the controller
> - * @data_width: Maximum data width supported by hardware per AHB
> master
> - * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
> + * @data_width: Maximum data width supported by hardware (in bytes)
> */
> struct dw_dma_platform_data {
> unsigned int nr_channels;
> @@ -57,7 +56,7 @@ struct dw_dma_platform_data {
> unsigned char chan_priority;
> unsigned short block_size;
> unsigned char nr_masters;
> - unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
> + unsigned char data_width;
> };
>
> #endif /* _PLATFORM_DATA_DMA_DW_H */
--
Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mans Rullgard <mans@mansr.com>, Viresh Kumar <vireshk@kernel.org>,
Vinod Koul <vinod.koul@intel.com>,
linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Vineet Gupta <vgupta@synopsys.com>,
Russell King <linux@arm.linux.org.uk>,
Dan Williams <dan.j.williams@intel.com>,
devicetree@vger.kernel.org, linux-snps-arc@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 07/15] dmaengine: dw: revisit data_width property
Date: Mon, 25 Jan 2016 10:42:21 +0200 [thread overview]
Message-ID: <1453711341.2521.206.camel@linux.intel.com> (raw)
In-Reply-To: <1453663322-14474-8-git-send-email-mans@mansr.com>
On Sun, 2016-01-24 at 19:21 +0000, Mans Rullgard wrote:
> From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>
> There are several changes are done here:
>
> - Convert the property to be in bytes
>
> Much more convenient than keeping encoded value.
>
> - Use one value for all AHB masters for now
>
> It seems in practice we have no controllers where masters have
> different
> data bus width, we still might return to distinct values when
> there is a use
> case.
>
> - Rename data_width to data-width in the device tree bindings.
>
> - While here, replace dwc_fast_ffs() by __ffs().
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Mans Rullgard <mans@mansr.com>
> ---
> This patch changes the DT binding, so it should probably be amended
> for
> compatibility with old device trees. I've included it as is since I
> think
> the change as such is good.
So, since all users have at least one master defined, we may easily to
use similar line for old DT variable
if (!of_property_read_u32(np, "data_width", &tmp)) /* removeme: old */
pdata->data_width = tmp;
else if (!of_property_read_u32(np, "data-
width", &tmp)) /* removeme: new */
pdata->data_width = tmp;
I any case Viresh might comment on this since it was his code regarding
to support SPEAr SoCs.
> ---
> Documentation/devicetree/bindings/dma/snps-dma.txt | 5 ++-
> arch/arc/boot/dts/abilis_tb10x.dtsi | 2 +-
> arch/arm/boot/dts/spear13xx.dtsi | 4 +--
> drivers/dma/dw/core.c | 40 +++---------
> ----------
> drivers/dma/dw/platform.c | 8 ++---
> drivers/dma/dw/regs.h | 2 +-
> include/linux/platform_data/dma-dw.h | 5 ++-
> 7 files changed, 16 insertions(+), 50 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt
> b/Documentation/devicetree/bindings/dma/snps-dma.txt
> index c99c1ffac199..fe7f7710a6b4 100644
> --- a/Documentation/devicetree/bindings/dma/snps-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
> @@ -13,8 +13,7 @@ Required properties:
> - chan_priority: priority of channels. 0 (default): increase from
> chan 0->n, 1:
> increase from chan n->0
> - block_size: Maximum block size supported by the controller
> -- data_width: Maximum data width supported by hardware per AHB
> master
> - (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
> +- data-width: Maximum data width supported by hardware (in bytes)
>
>
> Optional properties:
> @@ -38,7 +37,7 @@ Example:
> chan_allocation_order = <1>;
> chan_priority = <1>;
> block_size = <0xfff>;
> - data_width = <3 3>;
> + data-width = <8>;
> };
>
> DMA clients connected to the Designware DMA controller must use the
> format
> diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi
> b/arch/arc/boot/dts/abilis_tb10x.dtsi
> index cfb5052239a1..2f53bedb0cde 100644
> --- a/arch/arc/boot/dts/abilis_tb10x.dtsi
> +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
> @@ -112,7 +112,7 @@
> chan_allocation_order = <0>;
> chan_priority = <1>;
> block_size = <0x7ff>;
> - data_width = <2>;
> + data-width = <4>;
> clocks = <&ahb_clk>;
> clock-names = "hclk";
> };
> diff --git a/arch/arm/boot/dts/spear13xx.dtsi
> b/arch/arm/boot/dts/spear13xx.dtsi
> index 14594ce8c18a..474b66fa6a32 100644
> --- a/arch/arm/boot/dts/spear13xx.dtsi
> +++ b/arch/arm/boot/dts/spear13xx.dtsi
> @@ -117,7 +117,7 @@
> chan_priority = <1>;
> block_size = <0xfff>;
> dma-masters = <2>;
> - data_width = <3 3>;
> + data-width = <8>;
> };
>
> dma@eb000000 {
> @@ -133,7 +133,7 @@
> chan_allocation_order = <1>;
> chan_priority = <1>;
> block_size = <0xfff>;
> - data_width = <3 3>;
> + data-width = <8>;
> };
>
> fsmc: flash@b0000000 {
> diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
> index 140ea59ec882..28278e4c77ad 100644
> --- a/drivers/dma/dw/core.c
> +++ b/drivers/dma/dw/core.c
> @@ -168,21 +168,6 @@ static void dwc_initialize(struct dw_dma_chan
> *dwc)
>
> /*----------------------------------------------------------------
> ------*/
>
> -static inline unsigned int dwc_fast_ffs(unsigned long long v)
> -{
> - /*
> - * We can be a lot more clever here, but this should take
> care
> - * of the most common optimization.
> - */
> - if (!(v & 7))
> - return 3;
> - else if (!(v & 3))
> - return 2;
> - else if (!(v & 1))
> - return 1;
> - return 0;
> -}
> -
> static inline void dwc_dump_chan_regs(struct dw_dma_chan *dwc)
> {
> dev_err(chan2dev(&dwc->chan),
> @@ -712,7 +697,6 @@ dwc_prep_dma_memcpy(struct dma_chan *chan,
> dma_addr_t dest, dma_addr_t src,
> size_t offset;
> unsigned int src_width;
> unsigned int dst_width;
> - unsigned int data_width;
> u32 ctllo;
>
> dev_vdbg(chan2dev(chan),
> @@ -726,10 +710,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan,
> dma_addr_t dest, dma_addr_t src,
>
> dwc->direction = DMA_MEM_TO_MEM;
>
> - data_width = dw->data_width[dwc->m_master];
> -
> - src_width = dst_width = min_t(unsigned int, data_width,
> - dwc_fast_ffs(src | dest |
> len));
> + src_width = dst_width = __ffs(dw->data_width | src | dest |
> len);
>
> ctllo = DWC_DEFAULT_CTLLO(chan)
> | DWC_CTLL_DST_WIDTH(dst_width)
> @@ -792,7 +773,6 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> dma_addr_t reg;
> unsigned int reg_width;
> unsigned int mem_width;
> - unsigned int data_width;
> unsigned int i;
> struct scatterlist *sg;
> size_t total_len = 0;
> @@ -818,8 +798,6 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> ctllo |= sconfig->device_fc ?
> DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
> DWC_CTLL_FC(DW_DMA_FC_D_M2P);
>
> - data_width = dw->data_width[dwc->m_master];
> -
> for_each_sg(sgl, sg, sg_len, i) {
> struct dw_desc *desc;
> u32 len, dlen, mem;
> @@ -827,8 +805,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct
> scatterlist *sgl,
> mem = sg_dma_address(sg);
> len = sg_dma_len(sg);
>
> - mem_width = min_t(unsigned int,
> - data_width,
> dwc_fast_ffs(mem | len));
> + mem_width = __ffs(dw->data_width | mem |
> len);
>
> slave_sg_todev_fill_desc:
> desc = dwc_desc_get(dwc);
> @@ -874,8 +851,6 @@ slave_sg_todev_fill_desc:
> ctllo |= sconfig->device_fc ?
> DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
> DWC_CTLL_FC(DW_DMA_FC_D_P2M);
>
> - data_width = dw->data_width[dwc->m_master];
> -
> for_each_sg(sgl, sg, sg_len, i) {
> struct dw_desc *desc;
> u32 len, dlen, mem;
> @@ -883,8 +858,7 @@ slave_sg_todev_fill_desc:
> mem = sg_dma_address(sg);
> len = sg_dma_len(sg);
>
> - mem_width = min_t(unsigned int,
> - data_width,
> dwc_fast_ffs(mem | len));
> + mem_width = __ffs(dw->data_width | mem |
> len);
>
> slave_sg_fromdev_fill_desc:
> desc = dwc_desc_get(dwc);
> @@ -1531,10 +1505,7 @@ int dw_dma_probe(struct dw_dma_chip *chip,
> struct dw_dma_platform_data *pdata)
> /* Get hardware configuration parameters */
> pdata->nr_channels = (dw_params >> DW_PARAMS_NR_CHAN
> & 7) + 1;
> pdata->nr_masters = (dw_params >>
> DW_PARAMS_NR_MASTER & 3) + 1;
> - for (i = 0; i < pdata->nr_masters; i++) {
> - pdata->data_width[i] =
> - (dw_params >>
> DW_PARAMS_DATA_WIDTH(i) & 3) + 2;
> - }
> + pdata->data_width = 4 << (dw_params >>
> DW_PARAMS_DATA_WIDTH(0) & 3);
> max_blk_size = dma_readl(dw, MAX_BLK_SIZE);
>
> /* Fill platform data with the default values */
> @@ -1556,8 +1527,7 @@ int dw_dma_probe(struct dw_dma_chip *chip,
> struct dw_dma_platform_data *pdata)
>
> /* Get hardware configuration parameters */
> dw->nr_masters = pdata->nr_masters;
> - for (i = 0; i < dw->nr_masters; i++)
> - dw->data_width[i] = pdata->data_width[i];
> + dw->data_width = pdata->data_width;
>
> /* Calculate all channel mask before DMA setup */
> dw->all_chan_mask = (1 << pdata->nr_channels) - 1;
> diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
> index d3e1abcebd7f..89d0461f5dcc 100644
> --- a/drivers/dma/dw/platform.c
> +++ b/drivers/dma/dw/platform.c
> @@ -102,8 +102,8 @@ dw_dma_parse_dt(struct platform_device *pdev)
> {
> struct device_node *np = pdev->dev.of_node;
> struct dw_dma_platform_data *pdata;
> - u32 tmp, arr[DW_DMA_MAX_NR_MASTERS];
> u32 nr_channels;
> + u32 tmp;
>
> if (!np) {
> dev_err(&pdev->dev, "Missing DT data\n");
> @@ -138,10 +138,8 @@ dw_dma_parse_dt(struct platform_device *pdev)
> pdata->nr_masters = tmp;
> }
>
> - if (!of_property_read_u32_array(np, "data_width", arr,
> - pdata->nr_masters))
> - for (tmp = 0; tmp < pdata->nr_masters; tmp++)
> - pdata->data_width[tmp] = arr[tmp];
> + if (!of_property_read_u32(np, "data-width", &tmp))
> + pdata->data_width = tmp;
>
> return pdata;
> }
> diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h
> index e4b277565165..87bc97fca084 100644
> --- a/drivers/dma/dw/regs.h
> +++ b/drivers/dma/dw/regs.h
> @@ -285,7 +285,7 @@ struct dw_dma {
>
> /* hardware configuration */
> unsigned char nr_masters;
> - unsigned char data_width[DW_DMA_MAX_NR_MASTER
> S];
> + unsigned char data_width;
> };
>
> static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma
> *dw)
> diff --git a/include/linux/platform_data/dma-dw.h
> b/include/linux/platform_data/dma-dw.h
> index b881b978e486..4120a3eb71ca 100644
> --- a/include/linux/platform_data/dma-dw.h
> +++ b/include/linux/platform_data/dma-dw.h
> @@ -42,8 +42,7 @@ struct dw_dma_slave {
> * @chan_priority: Set channel priority increasing from 0 to 7 or 7
> to 0.
> * @block_size: Maximum block size supported by the controller
> * @nr_masters: Number of AHB masters supported by the controller
> - * @data_width: Maximum data width supported by hardware per AHB
> master
> - * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
> + * @data_width: Maximum data width supported by hardware (in bytes)
> */
> struct dw_dma_platform_data {
> unsigned int nr_channels;
> @@ -57,7 +56,7 @@ struct dw_dma_platform_data {
> unsigned char chan_priority;
> unsigned short block_size;
> unsigned char nr_masters;
> - unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
> + unsigned char data_width;
> };
>
> #endif /* _PLATFORM_DATA_DMA_DW_H */
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
next prev parent reply other threads:[~2016-01-25 8:42 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-24 19:21 [PATCH 00/15] dmaengine: dw: various fixes and cleanups Mans Rullgard
2016-01-24 19:21 ` [PATCH 01/15] dmaengine: dw: fix byte order of hw descriptor fields Mans Rullgard
2016-01-24 19:21 ` [PATCH 02/15] dmaengine: dw: clear LLP_[SD]_EN bits in last descriptor of a chain Mans Rullgard
[not found] ` <1453663322-14474-1-git-send-email-mans-2StjZFpD7GcAvxtiuMwx3w@public.gmane.org>
2016-01-24 19:21 ` [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology Mans Rullgard
2016-01-24 19:21 ` Mans Rullgard
2016-01-24 19:21 ` Mans Rullgard
2016-01-24 20:09 ` Hans-Christian Noren Egtvedt
2016-01-24 20:09 ` Hans-Christian Noren Egtvedt
[not found] ` <20160124200959.GA15633-BrfabpQBY5qlHtIdYg32fQ@public.gmane.org>
2016-01-24 20:19 ` Måns Rullgård
2016-01-24 20:19 ` Måns Rullgård
2016-01-24 20:19 ` Måns Rullgård
2016-01-24 20:37 ` Hans-Christian Noren Egtvedt
2016-01-24 20:37 ` Hans-Christian Noren Egtvedt
[not found] ` <20160124203720.GA29010-BrfabpQBY5qlHtIdYg32fQ@public.gmane.org>
2016-01-24 20:57 ` Måns Rullgård
2016-01-24 20:57 ` Måns Rullgård
2016-01-24 20:57 ` Måns Rullgård
[not found] ` <1453663322-14474-4-git-send-email-mans-2StjZFpD7GcAvxtiuMwx3w@public.gmane.org>
2016-01-24 22:36 ` Mark Brown
2016-01-24 22:36 ` Mark Brown
2016-01-24 22:36 ` Mark Brown
2016-01-24 22:38 ` Måns Rullgård
2016-01-24 22:38 ` Måns Rullgård
[not found] ` <yw1xk2myli0u.fsf-OEaqT8BN2ezZK2NkWkPsZwC/G2K4zDHf@public.gmane.org>
2016-01-25 6:03 ` Viresh Kumar
2016-01-25 6:03 ` Viresh Kumar
2016-01-25 6:03 ` Viresh Kumar
2016-01-25 6:03 ` Viresh Kumar
2016-01-25 12:05 ` Vinod Koul
2016-01-25 12:05 ` Vinod Koul
2016-01-25 12:23 ` Mark Brown
2016-01-25 12:23 ` Mark Brown
2016-01-25 8:35 ` Andy Shevchenko
2016-01-25 8:35 ` Andy Shevchenko
2016-01-25 12:24 ` Mark Brown
2016-01-25 12:24 ` Mark Brown
2016-01-25 14:01 ` Andy Shevchenko
2016-01-25 14:01 ` Andy Shevchenko
2016-01-27 12:47 ` Mark Brown
2016-01-27 12:47 ` Mark Brown
2016-01-24 19:21 ` [PATCH 04/15] dmaengine: dw: set src and dst master select according to xfer direction Mans Rullgard
2016-01-24 19:21 ` [PATCH 05/15] dmaengine: dw: set LMS field in descriptors Mans Rullgard
2016-01-24 19:21 ` [PATCH 06/15] dmaengine: dw: substitute dma_read_byaddr by dma_readl_native Mans Rullgard
2016-01-24 19:21 ` [PATCH 07/15] dmaengine: dw: revisit data_width property Mans Rullgard
2016-01-24 19:21 ` Mans Rullgard
2016-01-24 19:21 ` Mans Rullgard
2016-01-25 7:32 ` Vineet Gupta
2016-01-25 7:32 ` Vineet Gupta
2016-01-25 7:32 ` Vineet Gupta
2016-01-25 8:45 ` Andy Shevchenko
2016-01-25 8:45 ` Andy Shevchenko
2016-01-25 8:45 ` Andy Shevchenko
2016-01-25 8:45 ` Andy Shevchenko
2016-01-25 10:31 ` Måns Rullgård
2016-01-25 10:31 ` Måns Rullgård
2016-01-25 10:31 ` Måns Rullgård
2016-01-25 10:31 ` Måns Rullgård
2016-01-25 10:36 ` Andy Shevchenko
2016-01-25 10:36 ` Andy Shevchenko
2016-01-25 10:36 ` Andy Shevchenko
2016-01-25 10:36 ` Andy Shevchenko
2016-01-25 8:42 ` Andy Shevchenko [this message]
2016-01-25 8:42 ` Andy Shevchenko
2016-01-25 8:42 ` Andy Shevchenko
2016-01-25 8:42 ` Andy Shevchenko
2016-01-26 21:07 ` Rob Herring
2016-01-26 21:07 ` Rob Herring
2016-01-26 21:07 ` Rob Herring
2016-01-26 21:07 ` Rob Herring
2016-01-27 12:26 ` Andy Shevchenko
2016-01-27 12:26 ` Andy Shevchenko
2016-01-27 12:26 ` Andy Shevchenko
2016-01-27 12:26 ` Andy Shevchenko
2016-01-24 19:21 ` [PATCH 08/15] dmaengine: dw: define counter variables as unsigned int Mans Rullgard
2016-01-24 19:21 ` [PATCH 09/15] dmaengine: dw: keep entire platform data in struct dw_dma Mans Rullgard
2016-01-24 19:21 ` [PATCH 10/15] dmaengine: dw: pass platform data via struct dw_dma_chip Mans Rullgard
2016-01-24 19:21 ` [PATCH 11/15] dmaengine: dw: platform: use field-by-field initialization Mans Rullgard
2016-01-25 8:48 ` Andy Shevchenko
2016-01-24 19:21 ` [PATCH 12/15] dmaengine: dw: move dwc->paused to dwc->flags Mans Rullgard
2016-01-24 19:22 ` [PATCH 13/15] dmaengine: dw: move dwc->initialized " Mans Rullgard
2016-01-24 19:22 ` [PATCH 14/15] dmaengine: dw: move residue to a descriptor Mans Rullgard
2016-01-24 19:22 ` [PATCH 15/15] dmaengine: dw: set cdesc to NULL when free cyclic transfers Mans Rullgard
2016-01-25 10:37 ` [PATCH 00/15] dmaengine: dw: various fixes and cleanups Andy Shevchenko
2016-01-25 12:07 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453711341.2521.206.camel@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=linux-snps-arc@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.