From: linux@baker-net.org.uk (Adam Baker)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/3] ARM: mvebu: Add the hardware monitor to the NSA320 device tree
Date: Sat, 5 Mar 2016 15:34:57 +0000 [thread overview]
Message-ID: <1457192097-32538-4-git-send-email-linux@baker-net.org.uk> (raw)
In-Reply-To: <1457192097-32538-1-git-send-email-linux@baker-net.org.uk>
Add an entry for the hardware monitoring MCU
Signed-off-by: Adam Baker <linux@baker-net.org.uk>
---
This patch is unchanged from the version Gregory CLEMENT said
he would apply once the hwmon maintainers accept 2/3
---
arch/arm/boot/dts/kirkwood-nsa320.dts | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
index 24f686d..2a935e9 100644
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -193,10 +193,19 @@
};
};
+ hwmon {
+ compatible = "zyxel,nsa320-mcu";
+ pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
+ pinctrl-names = "default";
+
+ data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
/* The following pins are currently not assigned to a driver,
some of them should be configured as inputs.
- pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
- &pmx_htp &pmx_vid_b1
+ pinctrl-0 = <&pmx_htp &pmx_vid_b1
&pmx_power_resume_data &pmx_power_resume_clk>; */
};
--
2.1.4
WARNING: multiple messages have this Message-ID (diff)
From: Adam Baker <linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org>
To: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
Gregory Clement
<gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Sebastian Hesselbarth
<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Jean Delvare <jdelvare-IBi9RG/b67k@public.gmane.org>,
Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
carl.wolfgang-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org,
Adam Baker <linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org>
Subject: [PATCH v4 3/3] ARM: mvebu: Add the hardware monitor to the NSA320 device tree
Date: Sat, 5 Mar 2016 15:34:57 +0000 [thread overview]
Message-ID: <1457192097-32538-4-git-send-email-linux@baker-net.org.uk> (raw)
In-Reply-To: <1457192097-32538-1-git-send-email-linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org>
Add an entry for the hardware monitoring MCU
Signed-off-by: Adam Baker <linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org>
---
This patch is unchanged from the version Gregory CLEMENT said
he would apply once the hwmon maintainers accept 2/3
---
arch/arm/boot/dts/kirkwood-nsa320.dts | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
index 24f686d..2a935e9 100644
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -193,10 +193,19 @@
};
};
+ hwmon {
+ compatible = "zyxel,nsa320-mcu";
+ pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
+ pinctrl-names = "default";
+
+ data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
/* The following pins are currently not assigned to a driver,
some of them should be configured as inputs.
- pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
- &pmx_htp &pmx_vid_b1
+ pinctrl-0 = <&pmx_htp &pmx_vid_b1
&pmx_power_resume_data &pmx_power_resume_clk>; */
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-03-05 15:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-05 15:34 [PATCH v4 0/3] driver for the hardware monitoring chip in the Zyxel NSA320 Adam Baker
2016-03-05 15:34 ` Adam Baker
2016-03-05 15:34 ` [PATCH v4 1/3] hwmon: Define binding for the nsa320-hwmon driver Adam Baker
2016-03-05 15:34 ` Adam Baker
2016-03-05 15:34 ` [PATCH v4 2/3] hwmon: Create an NSA320 hardware monitoring driver Adam Baker
2016-03-05 15:34 ` Adam Baker
2016-03-05 15:34 ` Adam Baker [this message]
2016-03-05 15:34 ` [PATCH v4 3/3] ARM: mvebu: Add the hardware monitor to the NSA320 device tree Adam Baker
2016-03-29 15:45 ` Gregory CLEMENT
2016-03-29 15:45 ` Gregory CLEMENT
2016-03-08 11:55 ` [PATCH v4 0/3] driver for the hardware monitoring chip in the Zyxel NSA320 Guenter Roeck
2016-03-08 11:55 ` Guenter Roeck
2016-03-08 13:01 ` Gregory CLEMENT
2016-03-08 13:01 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457192097-32538-4-git-send-email-linux@baker-net.org.uk \
--to=linux@baker-net.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.