All of lore.kernel.org
 help / color / mirror / Atom feed
From: shankerd@codeaurora.org (Shanker Donthineni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4] irqchip/gicv3-its: Don't allow devices whose ID is outside range
Date: Wed,  9 Mar 2016 22:10:49 -0600	[thread overview]
Message-ID: <1457583049-5474-1-git-send-email-shankerd@codeaurora.org> (raw)

We are not checking whether the requested device identifier fits into
the device table memory or not. The function its_create_device()
assumes that enough memory has been allocated for whole DevID space
(reported by ITS_TYPER.Devbits) during the ITS probe() and continues
to initialize ITS hardware.

This assumption is not perfect, sometimes we reduce memory size either
because of its size crossing MAX_ORDER-1 or BASERn max size limit. The
MAPD command fails if 'Device ID' is outside of device table range.

Add a simple validation check to avoid MAPD failures since we are
not handling ITS command errors. This change also helps to return an
error -ENOMEM instead of success to caller.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
---
[v3]->[v4]
   Cleanup code based on Marc's comments, remove the variable
   'device_table' and extend validation check to cover case ITS
   HW with on-chip device table memory.

[v2]->[v3]
   Fix typo.

[v1]->[v2]
  Rebase to v4.5-rc6, edit commit text and simplify code changes.

 drivers/irqchip/irq-gic-v3-its.c | 42 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 43dfd15..d50d837 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -55,6 +55,16 @@ struct its_collection {
 };
 
 /*
+ * The ITS_BASER structure - contains memory information and cached
+ * value of BASER register configuration.
+ */
+struct its_baser {
+	void		*base;
+	u64		val;
+	u32		order;
+};
+
+/*
  * The ITS structure - contains most of the infrastructure, with the
  * top-level MSI domain, the command queue, the collections, and the
  * list of devices writing to it.
@@ -66,14 +76,12 @@ struct its_node {
 	unsigned long		phys_base;
 	struct its_cmd_block	*cmd_base;
 	struct its_cmd_block	*cmd_write;
-	struct {
-		void		*base;
-		u32		order;
-	} tables[GITS_BASER_NR_REGS];
+	struct its_baser	tables[GITS_BASER_NR_REGS];
 	struct its_collection	*collections;
 	struct list_head	its_device_list;
 	u64			flags;
 	u32			ite_size;
+	u32			device_ids;
 };
 
 #define ITS_ITT_ALIGN		SZ_256
@@ -839,6 +847,8 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
 		ids	= GITS_TYPER_DEVBITS(typer);
 	}
 
+	its->device_ids = ids;
+
 	for (i = 0; i < GITS_BASER_NR_REGS; i++) {
 		u64 val = readq_relaxed(its->base + GITS_BASER + i * 8);
 		u64 type = GITS_BASER_TYPE(val);
@@ -914,6 +924,7 @@ retry_baser:
 		}
 
 		val |= alloc_pages - 1;
+		its->tables[i].val = val;
 
 		writeq_relaxed(val, its->base + GITS_BASER + i * 8);
 		tmp = readq_relaxed(its->base + GITS_BASER + i * 8);
@@ -1139,9 +1150,22 @@ static struct its_device *its_find_device(struct its_node *its, u32 dev_id)
 	return its_dev;
 }
 
+static struct its_baser *its_get_baser(struct its_node *its, u32 type)
+{
+	int i;
+
+	for (i = 0; i < GITS_BASER_NR_REGS; i++) {
+		if (GITS_BASER_TYPE(its->tables[i].val) == type)
+			return &its->tables[i];
+	}
+
+	return NULL;
+}
+
 static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
 					    int nvecs)
 {
+	struct its_baser *baser;
 	struct its_device *dev;
 	unsigned long *lpi_map;
 	unsigned long flags;
@@ -1152,6 +1176,16 @@ static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
 	int nr_ites;
 	int sz;
 
+	baser = its_get_baser(its, GITS_BASER_TYPE_DEVICE);
+
+	/* Don't allow 'dev_id' that exceeds single, flat table limit */
+	if (baser) {
+		if (dev_id >= (PAGE_ORDER_TO_SIZE(baser->order) /
+			      GITS_BASER_ENTRY_SIZE(baser->val)))
+			return NULL;
+	} else if (ilog2(dev_id) >= its->device_ids)
+		return NULL;
+
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	/*
 	 * At least one bit of EventID is being used, hence a minimum
-- 
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc. 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, 
a Linux Foundation Collaborative Project

WARNING: multiple messages have this Message-ID (diff)
From: Shanker Donthineni <shankerd@codeaurora.org>
To: Marc Zyngier <marc.zyngier@arm.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Vikram Sethi <vikrams@codeaurora.org>,
	Jason Cooper <jason@lakedaemon.net>,
	Thomas Gleixner <tglx@linutronix.de>,
	Eric Auger <eric.auger@linaro.org>,
	Shanker Donthineni <shankerd@codeaurora.org>
Subject: [PATCH v4] irqchip/gicv3-its: Don't allow devices whose ID is outside range
Date: Wed,  9 Mar 2016 22:10:49 -0600	[thread overview]
Message-ID: <1457583049-5474-1-git-send-email-shankerd@codeaurora.org> (raw)

We are not checking whether the requested device identifier fits into
the device table memory or not. The function its_create_device()
assumes that enough memory has been allocated for whole DevID space
(reported by ITS_TYPER.Devbits) during the ITS probe() and continues
to initialize ITS hardware.

This assumption is not perfect, sometimes we reduce memory size either
because of its size crossing MAX_ORDER-1 or BASERn max size limit. The
MAPD command fails if 'Device ID' is outside of device table range.

Add a simple validation check to avoid MAPD failures since we are
not handling ITS command errors. This change also helps to return an
error -ENOMEM instead of success to caller.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
---
[v3]->[v4]
   Cleanup code based on Marc's comments, remove the variable
   'device_table' and extend validation check to cover case ITS
   HW with on-chip device table memory.

[v2]->[v3]
   Fix typo.

[v1]->[v2]
  Rebase to v4.5-rc6, edit commit text and simplify code changes.

 drivers/irqchip/irq-gic-v3-its.c | 42 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 43dfd15..d50d837 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -55,6 +55,16 @@ struct its_collection {
 };
 
 /*
+ * The ITS_BASER structure - contains memory information and cached
+ * value of BASER register configuration.
+ */
+struct its_baser {
+	void		*base;
+	u64		val;
+	u32		order;
+};
+
+/*
  * The ITS structure - contains most of the infrastructure, with the
  * top-level MSI domain, the command queue, the collections, and the
  * list of devices writing to it.
@@ -66,14 +76,12 @@ struct its_node {
 	unsigned long		phys_base;
 	struct its_cmd_block	*cmd_base;
 	struct its_cmd_block	*cmd_write;
-	struct {
-		void		*base;
-		u32		order;
-	} tables[GITS_BASER_NR_REGS];
+	struct its_baser	tables[GITS_BASER_NR_REGS];
 	struct its_collection	*collections;
 	struct list_head	its_device_list;
 	u64			flags;
 	u32			ite_size;
+	u32			device_ids;
 };
 
 #define ITS_ITT_ALIGN		SZ_256
@@ -839,6 +847,8 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
 		ids	= GITS_TYPER_DEVBITS(typer);
 	}
 
+	its->device_ids = ids;
+
 	for (i = 0; i < GITS_BASER_NR_REGS; i++) {
 		u64 val = readq_relaxed(its->base + GITS_BASER + i * 8);
 		u64 type = GITS_BASER_TYPE(val);
@@ -914,6 +924,7 @@ retry_baser:
 		}
 
 		val |= alloc_pages - 1;
+		its->tables[i].val = val;
 
 		writeq_relaxed(val, its->base + GITS_BASER + i * 8);
 		tmp = readq_relaxed(its->base + GITS_BASER + i * 8);
@@ -1139,9 +1150,22 @@ static struct its_device *its_find_device(struct its_node *its, u32 dev_id)
 	return its_dev;
 }
 
+static struct its_baser *its_get_baser(struct its_node *its, u32 type)
+{
+	int i;
+
+	for (i = 0; i < GITS_BASER_NR_REGS; i++) {
+		if (GITS_BASER_TYPE(its->tables[i].val) == type)
+			return &its->tables[i];
+	}
+
+	return NULL;
+}
+
 static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
 					    int nvecs)
 {
+	struct its_baser *baser;
 	struct its_device *dev;
 	unsigned long *lpi_map;
 	unsigned long flags;
@@ -1152,6 +1176,16 @@ static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
 	int nr_ites;
 	int sz;
 
+	baser = its_get_baser(its, GITS_BASER_TYPE_DEVICE);
+
+	/* Don't allow 'dev_id' that exceeds single, flat table limit */
+	if (baser) {
+		if (dev_id >= (PAGE_ORDER_TO_SIZE(baser->order) /
+			      GITS_BASER_ENTRY_SIZE(baser->val)))
+			return NULL;
+	} else if (ilog2(dev_id) >= its->device_ids)
+		return NULL;
+
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	/*
 	 * At least one bit of EventID is being used, hence a minimum
-- 
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc. 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, 
a Linux Foundation Collaborative Project

             reply	other threads:[~2016-03-10  4:10 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-10  4:10 Shanker Donthineni [this message]
2016-03-10  4:10 ` [PATCH v4] irqchip/gicv3-its: Don't allow devices whose ID is outside range Shanker Donthineni
  -- strict thread matches above, loose matches on Subject: below --
2016-03-17 15:18 Shanker Donthineni
2016-03-17 15:18 ` Shanker Donthineni
2016-03-17 15:34 ` Marc Zyngier
2016-03-17 15:34   ` Marc Zyngier
2016-03-17 17:14   ` Shanker Donthineni
2016-03-17 17:14     ` Shanker Donthineni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1457583049-5474-1-git-send-email-shankerd@codeaurora.org \
    --to=shankerd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.