[Intel-wired-lan] [PATCH] igb: properly start/stop PTP during suspend/resume

[Intel-wired-lan] [PATCH] igb: properly start/stop PTP during suspend/resume

[Jacob Keller]

Reported-by: Vidya Sagar <sagar.tv@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 21727692bef6..8f740bc69fc3 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7527,6 +7527,8 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake,
 	if (netif_running(netdev))
 		__igb_close(netdev, true);
 
+	igb_ptp_stop(adapter);
+
 	igb_clear_interrupt_scheme(adapter);
 
 #ifdef CONFIG_PM
@@ -7637,6 +7639,8 @@ static int igb_resume(struct device *dev)
 		return -ENOMEM;
 	}
 
+	igb_ptp_init(adapter);
+
 	igb_reset(adapter);
 
 	/* let the f/w know that the h/w is now under the control of the
-- 
2.8.1.493.g7b22612

[Intel-wired-lan] [PATCH] igb: properly start/stop PTP during suspend/resume

[Keller, Jacob E]

On Wed, 2016-05-11 at 11:23 -0700, Jacob Keller wrote:
> Reported-by: Vidya Sagar <sagar.tv@gmail.com>
> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
> ---
> ?drivers/net/ethernet/intel/igb/igb_main.c | 4 ++++
> ?1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/net/ethernet/intel/igb/igb_main.c
> b/drivers/net/ethernet/intel/igb/igb_main.c
> index 21727692bef6..8f740bc69fc3 100644
> --- a/drivers/net/ethernet/intel/igb/igb_main.c
> +++ b/drivers/net/ethernet/intel/igb/igb_main.c
> @@ -7527,6 +7527,8 @@ static int __igb_shutdown(struct pci_dev *pdev,
> bool *enable_wake,
> ?	if (netif_running(netdev))
> ?		__igb_close(netdev, true);
> ?
> +	igb_ptp_stop(adapter);
> +
> ?	igb_clear_interrupt_scheme(adapter);
> ?
> ?#ifdef CONFIG_PM
> @@ -7637,6 +7639,8 @@ static int igb_resume(struct device *dev)
> ?		return -ENOMEM;
> ?	}
> ?
> +	igb_ptp_init(adapter);
> +
> ?	igb_reset(adapter);
> ?
> ?	/* let the f/w know that the h/w is now under the control of
> the

Unfortunately I think this patch is wrong, my first pass at fixing was
to do igb_ptp_stop and igb_ptp_init, but this seems like it won't work
because we'll actually remove the PHC device, which we don't want to
do. I'm going to rework this patch and send a v2.

Thanks,
Jake