From: Raphael Poggi <poggi.raph@gmail.com>
To: barebox@lists.infradead.org
Cc: Raphael Poggi <poggi.raph@gmail.com>
Subject: [PATCH v2 12/12] arm: boards: add mach-qemu and virt64 board
Date: Tue, 14 Jun 2016 09:06:46 +0200 [thread overview]
Message-ID: <1465888006-39463-13-git-send-email-poggi.raph@gmail.com> (raw)
In-Reply-To: <1465888006-39463-1-git-send-email-poggi.raph@gmail.com>
Introduce mach-qemu and add qemu virt64 board which emulates arm64 board.
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
---
arch/arm/Kconfig | 5 +++
arch/arm/Makefile | 1 +
arch/arm/boards/Makefile | 1 +
arch/arm/boards/qemu-virt64/Kconfig | 8 ++++
arch/arm/boards/qemu-virt64/Makefile | 1 +
arch/arm/boards/qemu-virt64/init.c | 67 ++++++++++++++++++++++++++++++
arch/arm/configs/qemu_virt64_defconfig | 55 ++++++++++++++++++++++++
arch/arm/mach-qemu/Kconfig | 18 ++++++++
arch/arm/mach-qemu/Makefile | 2 +
arch/arm/mach-qemu/include/mach/debug_ll.h | 24 +++++++++++
arch/arm/mach-qemu/include/mach/devices.h | 13 ++++++
arch/arm/mach-qemu/virt_devices.c | 30 +++++++++++++
arch/arm/mach-qemu/virt_lowlevel.c | 19 +++++++++
13 files changed, 244 insertions(+)
create mode 100644 arch/arm/boards/qemu-virt64/Kconfig
create mode 100644 arch/arm/boards/qemu-virt64/Makefile
create mode 100644 arch/arm/boards/qemu-virt64/init.c
create mode 100644 arch/arm/configs/qemu_virt64_defconfig
create mode 100644 arch/arm/mach-qemu/Kconfig
create mode 100644 arch/arm/mach-qemu/Makefile
create mode 100644 arch/arm/mach-qemu/include/mach/debug_ll.h
create mode 100644 arch/arm/mach-qemu/include/mach/devices.h
create mode 100644 arch/arm/mach-qemu/virt_devices.c
create mode 100644 arch/arm/mach-qemu/virt_lowlevel.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 986fdaa..f904579 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -255,6 +255,10 @@ config ARCH_ZYNQ
bool "Xilinx Zynq-based boards"
select HAS_DEBUG_LL
+config ARCH_QEMU
+ bool "ARM QEMU boards"
+ select HAS_DEBUG_LL
+
endchoice
source arch/arm/cpu/Kconfig
@@ -280,6 +284,7 @@ source arch/arm/mach-vexpress/Kconfig
source arch/arm/mach-tegra/Kconfig
source arch/arm/mach-uemd/Kconfig
source arch/arm/mach-zynq/Kconfig
+source arch/arm/mach-qemu/Kconfig
config ARM_ASM_UNIFIED
bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 2743d96..fd3453d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -94,6 +94,7 @@ machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_UEMD) := uemd
machine-$(CONFIG_ARCH_ZYNQ) := zynq
+machine-$(CONFIG_ARCH_QEMU) := qemu
# Board directory name. This list is sorted alphanumerically
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 5a755c9..f12c074 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -134,3 +134,4 @@ obj-$(CONFIG_MACH_VIRT2REAL) += virt2real/
obj-$(CONFIG_MACH_ZEDBOARD) += avnet-zedboard/
obj-$(CONFIG_MACH_ZYLONITE) += zylonite/
obj-$(CONFIG_MACH_VARISCITE_MX6) += variscite-mx6/
+obj-$(CONFIG_MACH_QEMU_VIRT64) += qemu-virt64/
diff --git a/arch/arm/boards/qemu-virt64/Kconfig b/arch/arm/boards/qemu-virt64/Kconfig
new file mode 100644
index 0000000..b7bee3a
--- /dev/null
+++ b/arch/arm/boards/qemu-virt64/Kconfig
@@ -0,0 +1,8 @@
+
+if MACH_QEMU
+
+config ARCH_TEXT_BASE
+ hex
+ default 0x40000000
+
+endif
diff --git a/arch/arm/boards/qemu-virt64/Makefile b/arch/arm/boards/qemu-virt64/Makefile
new file mode 100644
index 0000000..eb072c0
--- /dev/null
+++ b/arch/arm/boards/qemu-virt64/Makefile
@@ -0,0 +1 @@
+obj-y += init.o
diff --git a/arch/arm/boards/qemu-virt64/init.c b/arch/arm/boards/qemu-virt64/init.c
new file mode 100644
index 0000000..312cc7f
--- /dev/null
+++ b/arch/arm/boards/qemu-virt64/init.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2016 Raphaël Poggi <poggi.raph@gmail.com>
+ *
+ * GPLv2 only
+ */
+
+#include <common.h>
+#include <init.h>
+#include <asm/armlinux.h>
+#include <asm/system_info.h>
+#include <mach/devices.h>
+#include <environment.h>
+#include <linux/sizes.h>
+#include <io.h>
+#include <globalvar.h>
+#include <asm/mmu.h>
+
+static int virt_mem_init(void)
+{
+ virt_add_ddram(SZ_512M);
+
+ add_cfi_flash_device(0, 0x00000000, SZ_4M, 0);
+
+ devfs_add_partition("nor0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self0");
+ devfs_add_partition("nor0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env0");
+
+ return 0;
+}
+mem_initcall(virt_mem_init);
+
+static int virt_console_init(void)
+{
+ virt_register_uart(0);
+
+ return 0;
+}
+console_initcall(virt_console_init);
+
+static int virt_core_init(void)
+{
+ char *hostname = "virt";
+
+ if (cpu_is_cortex_a53())
+ hostname = "virt-a53";
+ else if (cpu_is_cortex_a57())
+ hostname = "virt-a57";
+
+ barebox_set_model("ARM QEMU virt");
+ barebox_set_hostname(hostname);
+
+ return 0;
+}
+postcore_initcall(virt_core_init);
+
+static int virt_mmu_enable(void)
+{
+ /* Mapping all periph range */
+ arch_remap_range(0x09000000, 0x01000000, DEV_MEM);
+
+ /* Mapping all flash range */
+ arch_remap_range(0x00000000, 0x08000000, DEV_MEM);
+
+ mmu_enable();
+
+ return 0;
+}
+postmmu_initcall(virt_mmu_enable);
diff --git a/arch/arm/configs/qemu_virt64_defconfig b/arch/arm/configs/qemu_virt64_defconfig
new file mode 100644
index 0000000..cdce253
--- /dev/null
+++ b/arch/arm/configs/qemu_virt64_defconfig
@@ -0,0 +1,55 @@
+CONFIG_ARCH_QEMU=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x05000000
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_MMU=y
+# CONFIG_MMU_EARLY is not set
+CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0x01000000
+CONFIG_MEMORY_LAYOUT_FIXED=y
+CONFIG_STACK_BASE=0x60000000
+CONFIG_MALLOC_BASE=0x50000000
+CONFIG_PROMPT="virt64: "
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PASSWORD=y
+CONFIG_PARTITION=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/virt/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_LONGHELP=y
+# CONFIG_CMD_BOOTM is not set
+# CONFIG_CMD_BOOTU is not set
+# CONFIG_CMD_MOUNT is not set
+# CONFIG_CMD_UMOUNT is not set
+# CONFIG_CMD_CAT is not set
+# CONFIG_CMD_CD is not set
+# CONFIG_CMD_CP is not set
+# CONFIG_CMD_LS is not set
+# CONFIG_CMD_MKDIR is not set
+# CONFIG_CMD_PWD is not set
+# CONFIG_CMD_RM is not set
+# CONFIG_CMD_RMDIR is not set
+# CONFIG_CMD_FALSE is not set
+# CONFIG_CMD_TEST is not set
+# CONFIG_CMD_TRUE is not set
+# CONFIG_CMD_CLEAR is not set
+# CONFIG_CMD_ECHO is not set
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+# CONFIG_CMD_MD is not set
+# CONFIG_CMD_MEMCMP is not set
+# CONFIG_CMD_MEMCPY is not set
+# CONFIG_CMD_MEMSET is not set
+# CONFIG_CMD_MW is not set
+CONFIG_SERIAL_AMBA_PL011=y
+# CONFIG_SPI is not set
+CONFIG_MTD=y
+CONFIG_DRIVER_CFI=y
+CONFIG_DRIVER_CFI_BANK_WIDTH_8=y
+CONFIG_CFI_BUFFER_WRITE=y
+CONFIG_NAND=y
+# CONFIG_FS_RAMFS is not set
+CONFIG_DIGEST_SHA1_GENERIC=y
+CONFIG_DIGEST_SHA256_GENERIC=y
diff --git a/arch/arm/mach-qemu/Kconfig b/arch/arm/mach-qemu/Kconfig
new file mode 100644
index 0000000..d30bae4
--- /dev/null
+++ b/arch/arm/mach-qemu/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_QEMU
+
+config ARCH_TEXT_BASE
+ hex
+ default 0x40000000
+
+choice
+ prompt "ARM Board type"
+
+config MACH_QEMU_VIRT64
+ bool "QEMU arm64 virt machine"
+ select CPU_V8
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select ARM_AMBA
+ select HAVE_CONFIGURABLE_MEMORY_LAYOUT
+
+endchoice
+endif
diff --git a/arch/arm/mach-qemu/Makefile b/arch/arm/mach-qemu/Makefile
new file mode 100644
index 0000000..29e5f35
--- /dev/null
+++ b/arch/arm/mach-qemu/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_MACH_QEMU_VIRT64) += virt_devices.o
+lwl-$(CONFIG_MACH_QEMU_VIRT64) += virt_lowlevel.o
diff --git a/arch/arm/mach-qemu/include/mach/debug_ll.h b/arch/arm/mach-qemu/include/mach/debug_ll.h
new file mode 100644
index 0000000..89b0692
--- /dev/null
+++ b/arch/arm/mach-qemu/include/mach/debug_ll.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2013 Jean-Christophe PLAGNIOL-VILLARD <plagniol@jcrosoft.com>
+ *
+ * GPLv2 only
+ */
+
+#ifndef __MACH_DEBUG_LL_H__
+#define __MACH_DEBUG_LL_H__
+
+#include <linux/amba/serial.h>
+#include <io.h>
+
+#define DEBUG_LL_PHYS_BASE 0x10000000
+#define DEBUG_LL_PHYS_BASE_RS1 0x1c000000
+
+#ifdef MP
+#define DEBUG_LL_UART_ADDR DEBUG_LL_PHYS_BASE
+#else
+#define DEBUG_LL_UART_ADDR DEBUG_LL_PHYS_BASE_RS1
+#endif
+
+#include <asm/debug_ll_pl011.h>
+
+#endif
diff --git a/arch/arm/mach-qemu/include/mach/devices.h b/arch/arm/mach-qemu/include/mach/devices.h
new file mode 100644
index 0000000..9872c61
--- /dev/null
+++ b/arch/arm/mach-qemu/include/mach/devices.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2016 Raphaël Poggi <poggi.raph@gmail.com>
+ *
+ * GPLv2 only
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H__
+#define __ASM_ARCH_DEVICES_H__
+
+void virt_add_ddram(u32 size);
+void virt_register_uart(unsigned id);
+
+#endif /* __ASM_ARCH_DEVICES_H__ */
diff --git a/arch/arm/mach-qemu/virt_devices.c b/arch/arm/mach-qemu/virt_devices.c
new file mode 100644
index 0000000..999f463
--- /dev/null
+++ b/arch/arm/mach-qemu/virt_devices.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2016 Raphaël Poggi <poggi.raph@gmail.com>
+ *
+ * GPLv2 only
+ */
+
+#include <common.h>
+#include <linux/amba/bus.h>
+#include <asm/memory.h>
+#include <mach/devices.h>
+#include <linux/ioport.h>
+
+void virt_add_ddram(u32 size)
+{
+ arm_add_mem_device("ram0", 0x40000000, size);
+}
+
+void virt_register_uart(unsigned id)
+{
+ resource_size_t start;
+
+ switch (id) {
+ case 0:
+ start = 0x09000000;
+ break;
+ default:
+ return;
+ }
+ amba_apb_device_add(NULL, "uart-pl011", id, start, 4096, NULL, 0);
+}
diff --git a/arch/arm/mach-qemu/virt_lowlevel.c b/arch/arm/mach-qemu/virt_lowlevel.c
new file mode 100644
index 0000000..6f695a5
--- /dev/null
+++ b/arch/arm/mach-qemu/virt_lowlevel.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
+ *
+ * GPLv2 only
+ */
+
+#include <common.h>
+#include <linux/sizes.h>
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+#include <asm/system_info.h>
+
+void barebox_arm_reset_vector(void)
+{
+ arm_cpu_lowlevel_init();
+ arm_setup_stack(STACK_BASE);
+
+ barebox_arm_entry(0x40000000, SZ_512M, NULL);
+}
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-06-14 7:07 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-14 7:06 Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 01/12] arm: add armv8 Kconfig entries Raphael Poggi
2016-06-15 6:33 ` Sascha Hauer
2016-06-23 14:43 ` Raphaël Poggi
2016-06-14 7:06 ` [PATCH v2 02/12] arm: Makefile: rework makefile to handle armv8 Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 03/12] arm: introduce lib64 for arm64 related stuff Raphael Poggi
2016-06-15 6:15 ` Sascha Hauer
2016-06-23 14:43 ` Raphaël Poggi
2016-06-14 7:06 ` [PATCH v2 04/12] arm: cpu: add arm64 specific code Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 05/12] arm: include: system: add arm64 helper functions Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 06/12] arm: cpu: start: arm64 does not support relocation Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 07/12] arm: include: bitops: arm64 use generic __fls Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 08/12] arm: include: system_info: add armv8 identification Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 09/12] arm: cpu: cpuinfo: add armv8 support Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 10/12] arm: cpu: disable code portion in armv8 case Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 11/12] arm: cpu: add basic arm64 mmu support Raphael Poggi
2016-06-14 7:06 ` Raphael Poggi [this message]
2016-06-24 8:17 ` Raphaël Poggi
2016-06-24 11:49 ` Re: Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465888006-39463-13-git-send-email-poggi.raph@gmail.com \
--to=poggi.raph@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.