From: Raphael Poggi <poggi.raph@gmail.com>
To: barebox@lists.infradead.org
Cc: Raphael Poggi <poggi.raph@gmail.com>
Subject: [PATCH v2 02/12] arm: Makefile: rework makefile to handle armv8
Date: Tue, 14 Jun 2016 09:06:36 +0200 [thread overview]
Message-ID: <1465888006-39463-3-git-send-email-poggi.raph@gmail.com> (raw)
In-Reply-To: <1465888006-39463-1-git-send-email-poggi.raph@gmail.com>
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
---
arch/arm/Makefile | 29 +++++++++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5ccdb83..2743d96 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -1,7 +1,11 @@
CPPFLAGS += -D__ARM__ -fno-strict-aliasing
# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
+ifeq ($(CONFIG_CPU_V8),y)
+CPPFLAGS +=$(call cc-option,-maarch64,)
+else
CPPFLAGS +=$(call cc-option,-marm,)
+endif
ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
CPPFLAGS += -mbig-endian
@@ -17,13 +21,16 @@ endif
# at least some of the code would be executed with MMU off, lets be
# conservative and instruct the compiler not to generate any unaligned
# accesses
+ifeq ($(CONFIG_CPU_V8),n)
CFLAGS += -mno-unaligned-access
+endif
# This selects which instruction set is used.
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
+arch-$(CONFIG_CPU_64v8) := -D__LINUX_ARM_ARCH__=8 $(call cc-option,-march=armv8-a)
arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
@@ -34,11 +41,15 @@ tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+ifeq ($(CONFIG_CPU_V8), y)
+CFLAGS_ABI :=-mabi=lp64
+else
ifeq ($(CONFIG_AEABI),y)
CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork
else
CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
endif
+endif
ifeq ($(CONFIG_ARM_UNWIND),y)
CFLAGS_ABI +=-funwind-tables
@@ -51,8 +62,13 @@ CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
endif
+ifeq ($(CONFIG_CPU_V8), y)
+CPPFLAGS += $(CFLAGS_ABI) $(arch-y) $(tune-y)
+AFLAGS += -include asm/unified.h
+else
CPPFLAGS += $(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float $(CFLAGS_THUMB2)
AFLAGS += -include asm/unified.h -msoft-float $(AFLAGS_THUMB2)
+endif
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
@@ -275,12 +291,21 @@ MACH :=
endif
common-y += $(BOARD) arch/arm/boards/ $(MACH)
-common-y += arch/arm/lib/ arch/arm/cpu/
-common-y += arch/arm/crypto/
+common-y += arch/arm/cpu/
+
+ifeq ($(CONFIG_CPU_V8), y)
+common-y += arch/arm/lib64/
+else
+common-y += arch/arm/lib/ arch/arm/crypto/
+endif
common-$(CONFIG_OFTREE) += arch/arm/dts/
+ifeq ($(CONFIG_CPU_V8), y)
+lds-y := arch/arm/lib64/barebox.lds
+else
lds-y := arch/arm/lib/barebox.lds
+endif
common- += $(patsubst %,arch/arm/boards/%/,$(board-))
--
2.1.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-06-14 7:07 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-14 7:06 Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 01/12] arm: add armv8 Kconfig entries Raphael Poggi
2016-06-15 6:33 ` Sascha Hauer
2016-06-23 14:43 ` Raphaël Poggi
2016-06-14 7:06 ` Raphael Poggi [this message]
2016-06-14 7:06 ` [PATCH v2 03/12] arm: introduce lib64 for arm64 related stuff Raphael Poggi
2016-06-15 6:15 ` Sascha Hauer
2016-06-23 14:43 ` Raphaël Poggi
2016-06-14 7:06 ` [PATCH v2 04/12] arm: cpu: add arm64 specific code Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 05/12] arm: include: system: add arm64 helper functions Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 06/12] arm: cpu: start: arm64 does not support relocation Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 07/12] arm: include: bitops: arm64 use generic __fls Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 08/12] arm: include: system_info: add armv8 identification Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 09/12] arm: cpu: cpuinfo: add armv8 support Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 10/12] arm: cpu: disable code portion in armv8 case Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 11/12] arm: cpu: add basic arm64 mmu support Raphael Poggi
2016-06-14 7:06 ` [PATCH v2 12/12] arm: boards: add mach-qemu and virt64 board Raphael Poggi
2016-06-24 8:17 ` Raphaël Poggi
2016-06-24 11:49 ` Re: Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465888006-39463-3-git-send-email-poggi.raph@gmail.com \
--to=poggi.raph@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.