* [PATCH] virtio-gpu: use src not crtc
@ 2016-05-31 12:52 ` Gerd Hoffmann
0 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2016-05-31 12:52 UTC (permalink / raw)
To: dri-devel
Cc: Marc-André Lureau, Gerd Hoffmann, David Airlie,
open list:VIRTIO GPU DRIVER, open list
Pick up the correct source rectangle from framebuffer.
Without this multihead setups are not working correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
drivers/gpu/drm/virtio/virtgpu_plane.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/virtio/virtgpu_plane.c b/drivers/gpu/drm/virtio/virtgpu_plane.c
index b7778a7..925ca25 100644
--- a/drivers/gpu/drm/virtio/virtgpu_plane.c
+++ b/drivers/gpu/drm/virtio/virtgpu_plane.c
@@ -85,27 +85,32 @@ static void virtio_gpu_primary_plane_update(struct drm_plane *plane,
if (bo->dumb) {
virtio_gpu_cmd_transfer_to_host_2d
(vgdev, handle, 0,
- cpu_to_le32(plane->state->crtc_w),
- cpu_to_le32(plane->state->crtc_h),
- plane->state->crtc_x, plane->state->crtc_y, NULL);
+ cpu_to_le32(plane->state->src_w >> 16),
+ cpu_to_le32(plane->state->src_h >> 16),
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16, NULL);
}
} else {
handle = 0;
}
- DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d\n", handle,
+ DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d, src %dx%d+%d+%d\n", handle,
plane->state->crtc_w, plane->state->crtc_h,
- plane->state->crtc_x, plane->state->crtc_y);
+ plane->state->crtc_x, plane->state->crtc_y,
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16);
virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
- plane->state->crtc_w,
- plane->state->crtc_h,
- plane->state->crtc_x,
- plane->state->crtc_y);
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16);
virtio_gpu_cmd_resource_flush(vgdev, handle,
- plane->state->crtc_x,
- plane->state->crtc_y,
- plane->state->crtc_w,
- plane->state->crtc_h);
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16,
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16);
}
static void virtio_gpu_cursor_plane_update(struct drm_plane *plane,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH] virtio-gpu: use src not crtc
@ 2016-05-31 12:52 ` Gerd Hoffmann
0 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2016-05-31 12:52 UTC (permalink / raw)
To: dri-devel
Cc: Marc-André Lureau, Gerd Hoffmann, David Airlie,
open list:VIRTIO GPU DRIVER, open list
Pick up the correct source rectangle from framebuffer.
Without this multihead setups are not working correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
drivers/gpu/drm/virtio/virtgpu_plane.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/virtio/virtgpu_plane.c b/drivers/gpu/drm/virtio/virtgpu_plane.c
index b7778a7..925ca25 100644
--- a/drivers/gpu/drm/virtio/virtgpu_plane.c
+++ b/drivers/gpu/drm/virtio/virtgpu_plane.c
@@ -85,27 +85,32 @@ static void virtio_gpu_primary_plane_update(struct drm_plane *plane,
if (bo->dumb) {
virtio_gpu_cmd_transfer_to_host_2d
(vgdev, handle, 0,
- cpu_to_le32(plane->state->crtc_w),
- cpu_to_le32(plane->state->crtc_h),
- plane->state->crtc_x, plane->state->crtc_y, NULL);
+ cpu_to_le32(plane->state->src_w >> 16),
+ cpu_to_le32(plane->state->src_h >> 16),
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16, NULL);
}
} else {
handle = 0;
}
- DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d\n", handle,
+ DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d, src %dx%d+%d+%d\n", handle,
plane->state->crtc_w, plane->state->crtc_h,
- plane->state->crtc_x, plane->state->crtc_y);
+ plane->state->crtc_x, plane->state->crtc_y,
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16);
virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
- plane->state->crtc_w,
- plane->state->crtc_h,
- plane->state->crtc_x,
- plane->state->crtc_y);
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16);
virtio_gpu_cmd_resource_flush(vgdev, handle,
- plane->state->crtc_x,
- plane->state->crtc_y,
- plane->state->crtc_w,
- plane->state->crtc_h);
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16,
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16);
}
static void virtio_gpu_cursor_plane_update(struct drm_plane *plane,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH] virtio-gpu: use src not crtc
@ 2016-05-31 12:52 Gerd Hoffmann
0 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2016-05-31 12:52 UTC (permalink / raw)
To: dri-devel
Cc: David Airlie, open list, Marc-André Lureau,
open list:VIRTIO GPU DRIVER
Pick up the correct source rectangle from framebuffer.
Without this multihead setups are not working correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
drivers/gpu/drm/virtio/virtgpu_plane.c | 31 ++++++++++++++++++-------------
1 file changed, 18 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/virtio/virtgpu_plane.c b/drivers/gpu/drm/virtio/virtgpu_plane.c
index b7778a7..925ca25 100644
--- a/drivers/gpu/drm/virtio/virtgpu_plane.c
+++ b/drivers/gpu/drm/virtio/virtgpu_plane.c
@@ -85,27 +85,32 @@ static void virtio_gpu_primary_plane_update(struct drm_plane *plane,
if (bo->dumb) {
virtio_gpu_cmd_transfer_to_host_2d
(vgdev, handle, 0,
- cpu_to_le32(plane->state->crtc_w),
- cpu_to_le32(plane->state->crtc_h),
- plane->state->crtc_x, plane->state->crtc_y, NULL);
+ cpu_to_le32(plane->state->src_w >> 16),
+ cpu_to_le32(plane->state->src_h >> 16),
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16, NULL);
}
} else {
handle = 0;
}
- DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d\n", handle,
+ DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d, src %dx%d+%d+%d\n", handle,
plane->state->crtc_w, plane->state->crtc_h,
- plane->state->crtc_x, plane->state->crtc_y);
+ plane->state->crtc_x, plane->state->crtc_y,
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16);
virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
- plane->state->crtc_w,
- plane->state->crtc_h,
- plane->state->crtc_x,
- plane->state->crtc_y);
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16);
virtio_gpu_cmd_resource_flush(vgdev, handle,
- plane->state->crtc_x,
- plane->state->crtc_y,
- plane->state->crtc_w,
- plane->state->crtc_h);
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16,
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16);
}
static void virtio_gpu_cursor_plane_update(struct drm_plane *plane,
--
1.8.3.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] virtio-gpu: use src not crtc
2016-05-31 12:52 ` Gerd Hoffmann
(?)
@ 2016-06-14 10:13 ` Marc-André Lureau
-1 siblings, 0 replies; 9+ messages in thread
From: Marc-André Lureau @ 2016-06-14 10:13 UTC (permalink / raw)
To: Gerd Hoffmann
Cc: David Airlie, open list, dri-devel, open list:VIRTIO GPU DRIVER
Hi
On Tue, May 31, 2016 at 2:52 PM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> Pick up the correct source rectangle from framebuffer.
> Without this multihead setups are not working correctly.
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Additionally, I had to modify the page_flip() function to take the
plane source coordinates for virgl/3d multihead to work. Feel free to
squash.
--- a/drivers/gpu/drm/virtio/virtgpu_display.c
+++ b/drivers/gpu/drm/virtio/virtgpu_display.c
@@ -68,11 +68,16 @@ static int virtio_gpu_page_flip(struct drm_crtc *crtc,
0, 0, NULL);
}
virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
- crtc->mode.hdisplay,
- crtc->mode.vdisplay, 0, 0);
- virtio_gpu_cmd_resource_flush(vgdev, handle, 0, 0,
- crtc->mode.hdisplay,
- crtc->mode.vdisplay);
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16);
+
+ virtio_gpu_cmd_resource_flush(vgdev, handle,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16,
+ plane->state->src_w >> 16,
+ plane->state->src_h);
> ---
> drivers/gpu/drm/virtio/virtgpu_plane.c | 31 ++++++++++++++++++-------------
> 1 file changed, 18 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/virtio/virtgpu_plane.c b/drivers/gpu/drm/virtio/virtgpu_plane.c
> index b7778a7..925ca25 100644
> --- a/drivers/gpu/drm/virtio/virtgpu_plane.c
> +++ b/drivers/gpu/drm/virtio/virtgpu_plane.c
> @@ -85,27 +85,32 @@ static void virtio_gpu_primary_plane_update(struct drm_plane *plane,
> if (bo->dumb) {
> virtio_gpu_cmd_transfer_to_host_2d
> (vgdev, handle, 0,
> - cpu_to_le32(plane->state->crtc_w),
> - cpu_to_le32(plane->state->crtc_h),
> - plane->state->crtc_x, plane->state->crtc_y, NULL);
> + cpu_to_le32(plane->state->src_w >> 16),
> + cpu_to_le32(plane->state->src_h >> 16),
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16, NULL);
> }
> } else {
> handle = 0;
> }
>
> - DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d\n", handle,
> + DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d, src %dx%d+%d+%d\n", handle,
> plane->state->crtc_w, plane->state->crtc_h,
> - plane->state->crtc_x, plane->state->crtc_y);
> + plane->state->crtc_x, plane->state->crtc_y,
> + plane->state->src_w >> 16,
> + plane->state->src_h >> 16,
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16);
> virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
> - plane->state->crtc_w,
> - plane->state->crtc_h,
> - plane->state->crtc_x,
> - plane->state->crtc_y);
> + plane->state->src_w >> 16,
> + plane->state->src_h >> 16,
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16);
> virtio_gpu_cmd_resource_flush(vgdev, handle,
> - plane->state->crtc_x,
> - plane->state->crtc_y,
> - plane->state->crtc_w,
> - plane->state->crtc_h);
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16,
> + plane->state->src_w >> 16,
> + plane->state->src_h >> 16);
> }
>
> static void virtio_gpu_cursor_plane_update(struct drm_plane *plane,
> --
> 1.8.3.1
>
--
Marc-André Lureau
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] virtio-gpu: use src not crtc
2016-05-31 12:52 ` Gerd Hoffmann
@ 2016-06-14 10:13 ` Marc-André Lureau
-1 siblings, 0 replies; 9+ messages in thread
From: Marc-André Lureau @ 2016-06-14 10:13 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: open list, dri-devel, open list:VIRTIO GPU DRIVER
Hi
On Tue, May 31, 2016 at 2:52 PM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> Pick up the correct source rectangle from framebuffer.
> Without this multihead setups are not working correctly.
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Additionally, I had to modify the page_flip() function to take the
plane source coordinates for virgl/3d multihead to work. Feel free to
squash.
--- a/drivers/gpu/drm/virtio/virtgpu_display.c
+++ b/drivers/gpu/drm/virtio/virtgpu_display.c
@@ -68,11 +68,16 @@ static int virtio_gpu_page_flip(struct drm_crtc *crtc,
0, 0, NULL);
}
virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
- crtc->mode.hdisplay,
- crtc->mode.vdisplay, 0, 0);
- virtio_gpu_cmd_resource_flush(vgdev, handle, 0, 0,
- crtc->mode.hdisplay,
- crtc->mode.vdisplay);
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16);
+
+ virtio_gpu_cmd_resource_flush(vgdev, handle,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16,
+ plane->state->src_w >> 16,
+ plane->state->src_h);
> ---
> drivers/gpu/drm/virtio/virtgpu_plane.c | 31 ++++++++++++++++++-------------
> 1 file changed, 18 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/virtio/virtgpu_plane.c b/drivers/gpu/drm/virtio/virtgpu_plane.c
> index b7778a7..925ca25 100644
> --- a/drivers/gpu/drm/virtio/virtgpu_plane.c
> +++ b/drivers/gpu/drm/virtio/virtgpu_plane.c
> @@ -85,27 +85,32 @@ static void virtio_gpu_primary_plane_update(struct drm_plane *plane,
> if (bo->dumb) {
> virtio_gpu_cmd_transfer_to_host_2d
> (vgdev, handle, 0,
> - cpu_to_le32(plane->state->crtc_w),
> - cpu_to_le32(plane->state->crtc_h),
> - plane->state->crtc_x, plane->state->crtc_y, NULL);
> + cpu_to_le32(plane->state->src_w >> 16),
> + cpu_to_le32(plane->state->src_h >> 16),
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16, NULL);
> }
> } else {
> handle = 0;
> }
>
> - DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d\n", handle,
> + DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d, src %dx%d+%d+%d\n", handle,
> plane->state->crtc_w, plane->state->crtc_h,
> - plane->state->crtc_x, plane->state->crtc_y);
> + plane->state->crtc_x, plane->state->crtc_y,
> + plane->state->src_w >> 16,
> + plane->state->src_h >> 16,
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16);
> virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
> - plane->state->crtc_w,
> - plane->state->crtc_h,
> - plane->state->crtc_x,
> - plane->state->crtc_y);
> + plane->state->src_w >> 16,
> + plane->state->src_h >> 16,
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16);
> virtio_gpu_cmd_resource_flush(vgdev, handle,
> - plane->state->crtc_x,
> - plane->state->crtc_y,
> - plane->state->crtc_w,
> - plane->state->crtc_h);
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16,
> + plane->state->src_w >> 16,
> + plane->state->src_h >> 16);
> }
>
> static void virtio_gpu_cursor_plane_update(struct drm_plane *plane,
> --
> 1.8.3.1
>
--
Marc-André Lureau
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] virtio-gpu: use src not crtc
@ 2016-06-14 10:13 ` Marc-André Lureau
0 siblings, 0 replies; 9+ messages in thread
From: Marc-André Lureau @ 2016-06-14 10:13 UTC (permalink / raw)
To: Gerd Hoffmann
Cc: dri-devel, David Airlie, open list:VIRTIO GPU DRIVER, open list
Hi
On Tue, May 31, 2016 at 2:52 PM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> Pick up the correct source rectangle from framebuffer.
> Without this multihead setups are not working correctly.
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Additionally, I had to modify the page_flip() function to take the
plane source coordinates for virgl/3d multihead to work. Feel free to
squash.
--- a/drivers/gpu/drm/virtio/virtgpu_display.c
+++ b/drivers/gpu/drm/virtio/virtgpu_display.c
@@ -68,11 +68,16 @@ static int virtio_gpu_page_flip(struct drm_crtc *crtc,
0, 0, NULL);
}
virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
- crtc->mode.hdisplay,
- crtc->mode.vdisplay, 0, 0);
- virtio_gpu_cmd_resource_flush(vgdev, handle, 0, 0,
- crtc->mode.hdisplay,
- crtc->mode.vdisplay);
+ plane->state->src_w >> 16,
+ plane->state->src_h >> 16,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16);
+
+ virtio_gpu_cmd_resource_flush(vgdev, handle,
+ plane->state->src_x >> 16,
+ plane->state->src_y >> 16,
+ plane->state->src_w >> 16,
+ plane->state->src_h);
> ---
> drivers/gpu/drm/virtio/virtgpu_plane.c | 31 ++++++++++++++++++-------------
> 1 file changed, 18 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/virtio/virtgpu_plane.c b/drivers/gpu/drm/virtio/virtgpu_plane.c
> index b7778a7..925ca25 100644
> --- a/drivers/gpu/drm/virtio/virtgpu_plane.c
> +++ b/drivers/gpu/drm/virtio/virtgpu_plane.c
> @@ -85,27 +85,32 @@ static void virtio_gpu_primary_plane_update(struct drm_plane *plane,
> if (bo->dumb) {
> virtio_gpu_cmd_transfer_to_host_2d
> (vgdev, handle, 0,
> - cpu_to_le32(plane->state->crtc_w),
> - cpu_to_le32(plane->state->crtc_h),
> - plane->state->crtc_x, plane->state->crtc_y, NULL);
> + cpu_to_le32(plane->state->src_w >> 16),
> + cpu_to_le32(plane->state->src_h >> 16),
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16, NULL);
> }
> } else {
> handle = 0;
> }
>
> - DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d\n", handle,
> + DRM_DEBUG("handle 0x%x, crtc %dx%d+%d+%d, src %dx%d+%d+%d\n", handle,
> plane->state->crtc_w, plane->state->crtc_h,
> - plane->state->crtc_x, plane->state->crtc_y);
> + plane->state->crtc_x, plane->state->crtc_y,
> + plane->state->src_w >> 16,
> + plane->state->src_h >> 16,
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16);
> virtio_gpu_cmd_set_scanout(vgdev, output->index, handle,
> - plane->state->crtc_w,
> - plane->state->crtc_h,
> - plane->state->crtc_x,
> - plane->state->crtc_y);
> + plane->state->src_w >> 16,
> + plane->state->src_h >> 16,
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16);
> virtio_gpu_cmd_resource_flush(vgdev, handle,
> - plane->state->crtc_x,
> - plane->state->crtc_y,
> - plane->state->crtc_w,
> - plane->state->crtc_h);
> + plane->state->src_x >> 16,
> + plane->state->src_y >> 16,
> + plane->state->src_w >> 16,
> + plane->state->src_h >> 16);
> }
>
> static void virtio_gpu_cursor_plane_update(struct drm_plane *plane,
> --
> 1.8.3.1
>
--
Marc-André Lureau
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] virtio-gpu: use src not crtc
2016-06-14 10:13 ` Marc-André Lureau
(?)
(?)
@ 2016-06-14 12:57 ` Gerd Hoffmann
-1 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2016-06-14 12:57 UTC (permalink / raw)
To: Marc-André Lureau
Cc: David Airlie, open list, dri-devel, open list:VIRTIO GPU DRIVER
On Di, 2016-06-14 at 12:13 +0200, Marc-André Lureau wrote:
> Hi
>
> On Tue, May 31, 2016 at 2:52 PM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> > Pick up the correct source rectangle from framebuffer.
> > Without this multihead setups are not working correctly.
> >
> > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
>
> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Additionally, I had to modify the page_flip() function to take the
> plane source coordinates for virgl/3d multihead to work. Feel free to
> squash.
This is in progress of being sorted, by dropping the
virtio_gpu_page_flip function altogether in favor of atomic helpers,
which will use the (already fixed) plane callbacks instead.
See nonblocking commit support patches by Daniel Vetter on this list.
cheers,
Gerd
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] virtio-gpu: use src not crtc
2016-06-14 10:13 ` Marc-André Lureau
@ 2016-06-14 12:57 ` Gerd Hoffmann
-1 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2016-06-14 12:57 UTC (permalink / raw)
To: Marc-André Lureau; +Cc: open list, dri-devel, open list:VIRTIO GPU DRIVER
On Di, 2016-06-14 at 12:13 +0200, Marc-André Lureau wrote:
> Hi
>
> On Tue, May 31, 2016 at 2:52 PM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> > Pick up the correct source rectangle from framebuffer.
> > Without this multihead setups are not working correctly.
> >
> > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
>
> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Additionally, I had to modify the page_flip() function to take the
> plane source coordinates for virgl/3d multihead to work. Feel free to
> squash.
This is in progress of being sorted, by dropping the
virtio_gpu_page_flip function altogether in favor of atomic helpers,
which will use the (already fixed) plane callbacks instead.
See nonblocking commit support patches by Daniel Vetter on this list.
cheers,
Gerd
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] virtio-gpu: use src not crtc
@ 2016-06-14 12:57 ` Gerd Hoffmann
0 siblings, 0 replies; 9+ messages in thread
From: Gerd Hoffmann @ 2016-06-14 12:57 UTC (permalink / raw)
To: Marc-André Lureau
Cc: dri-devel, David Airlie, open list:VIRTIO GPU DRIVER, open list
On Di, 2016-06-14 at 12:13 +0200, Marc-André Lureau wrote:
> Hi
>
> On Tue, May 31, 2016 at 2:52 PM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> > Pick up the correct source rectangle from framebuffer.
> > Without this multihead setups are not working correctly.
> >
> > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
>
> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
>
> Additionally, I had to modify the page_flip() function to take the
> plane source coordinates for virgl/3d multihead to work. Feel free to
> squash.
This is in progress of being sorted, by dropping the
virtio_gpu_page_flip function altogether in favor of atomic helpers,
which will use the (already fixed) plane callbacks instead.
See nonblocking commit support patches by Daniel Vetter on this list.
cheers,
Gerd
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2016-06-14 12:57 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-05-31 12:52 [PATCH] virtio-gpu: use src not crtc Gerd Hoffmann
2016-05-31 12:52 ` Gerd Hoffmann
2016-06-14 10:13 ` Marc-André Lureau
2016-06-14 10:13 ` Marc-André Lureau
2016-06-14 10:13 ` Marc-André Lureau
2016-06-14 12:57 ` Gerd Hoffmann
2016-06-14 12:57 ` Gerd Hoffmann
2016-06-14 12:57 ` Gerd Hoffmann
-- strict thread matches above, loose matches on Subject: below --
2016-05-31 12:52 Gerd Hoffmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.