All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kamal Dasu <kdasu.kdev@gmail.com>
To: broonie@kernel.org, linux-spi@vger.kernel.org,
	linux-mtd@lists.infradead.org, vigneshr@ti.com,
	f.fainelli@gmail.com
Cc: bcm-kernel-feedback-list@broadcom.com,
	vikram.prakash@broadcom.com, andy.fung@broadcom.com,
	jon.mason@broadcom.com, jchandra@broadcom.com,
	Kamal Dasu <kdasu.kdev@gmail.com>,
	Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Subject: [PATCH v5 6/8] arm: dts: Add bcm-nsp and bcm958625k support
Date: Fri, 29 Jul 2016 18:13:11 -0400	[thread overview]
Message-ID: <1469830393-13295-7-git-send-email-kdasu.kdev@gmail.com> (raw)
In-Reply-To: <1469830393-13295-1-git-send-email-kdasu.kdev@gmail.com>

Adding qspi node compatible with the new spi-bcm-qspi
driver for the broadcom's northstar SoC.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi   | 33 +++++++++++++++++++++++++++++----
 arch/arm/boot/dts/bcm958625k.dts | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 6a40ed7..26c863e 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -160,7 +160,7 @@
 
 	axi {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x0011ba08>;
+		ranges = <0x00000000 0x18000000 0x0011c40a>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -206,9 +206,34 @@
 			brcm,nand-has-wp;
 		};
 
-		rng: rng@33000 {
-			compatible = "brcm,bcm-nsp-rng";
-			reg = <0x33000 0x14>;
+		qspi: qspi@27200 {
+			compatible = "brcm,spi-bcm-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			clock-frequency = <12500000>;
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		ccbtimer0: timer@34000 {
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 2d84226..ab7ba8f 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -126,3 +126,37 @@
 		groups = "nand_grp";
 	};
 };
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@1 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@2 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@3 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	vigneshr-l0cyMroinI0@public.gmane.org,
	f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
	vikram.prakash-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
	andy.fung-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
	jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
	jchandra-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
	Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Yendapally Reddy Dhananjaya Reddy
	<yendapally.reddy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v5 6/8] arm: dts: Add bcm-nsp and bcm958625k support
Date: Fri, 29 Jul 2016 18:13:11 -0400	[thread overview]
Message-ID: <1469830393-13295-7-git-send-email-kdasu.kdev@gmail.com> (raw)
In-Reply-To: <1469830393-13295-1-git-send-email-kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Adding qspi node compatible with the new spi-bcm-qspi
driver for the broadcom's northstar SoC.

Signed-off-by: Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
 arch/arm/boot/dts/bcm-nsp.dtsi   | 33 +++++++++++++++++++++++++++++----
 arch/arm/boot/dts/bcm958625k.dts | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 6a40ed7..26c863e 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -160,7 +160,7 @@
 
 	axi {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x0011ba08>;
+		ranges = <0x00000000 0x18000000 0x0011c40a>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -206,9 +206,34 @@
 			brcm,nand-has-wp;
 		};
 
-		rng: rng@33000 {
-			compatible = "brcm,bcm-nsp-rng";
-			reg = <0x33000 0x14>;
+		qspi: qspi@27200 {
+			compatible = "brcm,spi-bcm-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			clock-frequency = <12500000>;
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		ccbtimer0: timer@34000 {
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 2d84226..ab7ba8f 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -126,3 +126,37 @@
 		groups = "nand_grp";
 	};
 };
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@1 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@2 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@3 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-07-29 22:14 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-29 22:13 [PATCH v5 0/8] Broadcom stb, nsp, ns2, cygnus QSPI driver Kamal Dasu
2016-07-29 22:13 ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 1/8] Documentation: dt: spi: Add BRCMSTB SoC bindings Kamal Dasu
2016-07-29 22:13   ` Kamal Dasu
2016-08-04 21:06   ` Mark Brown
2016-08-04 21:06     ` Mark Brown
2016-08-04 22:20     ` Florian Fainelli
2016-08-04 22:20       ` Florian Fainelli
2016-08-05 11:03       ` Mark Brown
2016-08-05 11:03         ` Mark Brown
2016-08-16 18:19   ` Mark Brown
2016-08-16 18:19     ` Mark Brown
2016-08-19 15:07     ` Kamal Dasu
2016-08-19 15:07       ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 2/8] spi: bcm-qspi: Add Broadcom MSPI driver Kamal Dasu
2016-07-29 22:13   ` Kamal Dasu
2016-08-16 18:15   ` Mark Brown
2016-08-16 18:15     ` Mark Brown
2016-08-19 15:20     ` Kamal Dasu
2016-08-19 15:20       ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 3/8] spi: bcm-qspi: Add BSPI spi-nor flash controller driver Kamal Dasu
2016-07-29 22:13   ` Kamal Dasu
2016-08-16 18:31   ` Mark Brown
2016-08-16 18:31     ` Mark Brown
2016-08-19 15:33     ` Kamal Dasu
2016-08-19 15:33       ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 4/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer Kamal Dasu
2016-07-29 22:13   ` Kamal Dasu
2016-08-04 21:07   ` Mark Brown
2016-08-04 21:07     ` Mark Brown
2016-08-19 14:59     ` Kamal Dasu
2016-08-19 14:59       ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 5/8] Documentation: dt: spi: Add Broadcom NSP, NS2 SoC bindings Kamal Dasu
2016-07-29 22:13   ` Kamal Dasu
2016-08-16 18:32   ` Mark Brown
2016-08-16 18:32     ` Mark Brown
2016-07-29 22:13 ` Kamal Dasu [this message]
2016-07-29 22:13   ` [PATCH v5 6/8] arm: dts: Add bcm-nsp and bcm958625k support Kamal Dasu
2016-08-01 15:09   ` Jonas Gorski
2016-08-01 15:09     ` Jonas Gorski
2016-08-02 19:51     ` Kamal Dasu
2016-08-02 19:51       ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 7/8] arm64: dts: Add ns2 SoC support Kamal Dasu
2016-07-29 22:13   ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 8/8] spi: nsp-qspi: Add Broadcom NSP, NS2, Cygnus " Kamal Dasu
2016-07-29 22:13   ` Kamal Dasu
2016-08-16 18:40   ` Mark Brown
2016-08-16 18:40     ` Mark Brown
2016-08-19 15:43     ` Kamal Dasu
2016-08-19 15:43       ` Kamal Dasu
2016-08-19 16:42       ` Mark Brown
2016-08-19 16:42         ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469830393-13295-7-git-send-email-kdasu.kdev@gmail.com \
    --to=kdasu.kdev@gmail.com \
    --cc=andy.fung@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=broonie@kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=jchandra@broadcom.com \
    --cc=jon.mason@broadcom.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=vigneshr@ti.com \
    --cc=vikram.prakash@broadcom.com \
    --cc=yendapally.reddy@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.