From: Kamal Dasu <kdasu.kdev@gmail.com>
To: broonie@kernel.org, linux-spi@vger.kernel.org,
linux-mtd@lists.infradead.org, vigneshr@ti.com,
f.fainelli@gmail.com
Cc: bcm-kernel-feedback-list@broadcom.com,
vikram.prakash@broadcom.com, andy.fung@broadcom.com,
jon.mason@broadcom.com, jchandra@broadcom.com,
Kamal Dasu <kdasu.kdev@gmail.com>,
Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Subject: [PATCH v5 7/8] arm64: dts: Add ns2 SoC support
Date: Fri, 29 Jul 2016 18:13:12 -0400 [thread overview]
Message-ID: <1469830393-13295-8-git-send-email-kdasu.kdev@gmail.com> (raw)
In-Reply-To: <1469830393-13295-1-git-send-email-kdasu.kdev@gmail.com>
Adding qspi node compatible with the new spi-bcm-qspi
driver for the broadcom's northstar2 SoC.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
---
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 34 ++++++++++++++++++++++++++++----
arch/arm64/boot/dts/broadcom/ns2.dtsi | 19 ++++++++++++++++++
2 files changed, 49 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index ea5603f..a40d3f5 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -141,10 +141,36 @@
};
};
-&mdio_mux_iproc {
- mdio@10 {
- gphy0: eth-phy@10 {
- reg = <0x10>;
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@1 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@2 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@3 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
};
};
};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index 46b78fa..efc5d50 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -438,5 +438,24 @@
brcm,nand-has-wp;
};
+
+ qspi: spi@66470200 {
+ compatible = "brcm,spi-bcm-qspi";
+ reg = <0x66470200 0x184>,
+ <0x66470000 0x124>,
+ <0x67017408 0x004>,
+ <0x664703a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs",
+ "intr_status_reg";
+ interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_l1_intr";
+ clocks = <&iprocmed>;
+ clock-names = "iprocmed";
+ clock-frequency = <12500000>;
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
};
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
vigneshr-l0cyMroinI0@public.gmane.org,
f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
vikram.prakash-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
andy.fung-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
jchandra-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Yendapally Reddy Dhananjaya Reddy
<yendapally.reddy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Subject: [PATCH v5 7/8] arm64: dts: Add ns2 SoC support
Date: Fri, 29 Jul 2016 18:13:12 -0400 [thread overview]
Message-ID: <1469830393-13295-8-git-send-email-kdasu.kdev@gmail.com> (raw)
In-Reply-To: <1469830393-13295-1-git-send-email-kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Adding qspi node compatible with the new spi-bcm-qspi
driver for the broadcom's northstar2 SoC.
Signed-off-by: Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 34 ++++++++++++++++++++++++++++----
arch/arm64/boot/dts/broadcom/ns2.dtsi | 19 ++++++++++++++++++
2 files changed, 49 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index ea5603f..a40d3f5 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -141,10 +141,36 @@
};
};
-&mdio_mux_iproc {
- mdio@10 {
- gphy0: eth-phy@10 {
- reg = <0x10>;
+&qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@1 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@2 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@3 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
};
};
};
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index 46b78fa..efc5d50 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -438,5 +438,24 @@
brcm,nand-has-wp;
};
+
+ qspi: spi@66470200 {
+ compatible = "brcm,spi-bcm-qspi";
+ reg = <0x66470200 0x184>,
+ <0x66470000 0x124>,
+ <0x67017408 0x004>,
+ <0x664703a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs",
+ "intr_status_reg";
+ interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_l1_intr";
+ clocks = <&iprocmed>;
+ clock-names = "iprocmed";
+ clock-frequency = <12500000>;
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-07-29 22:14 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-29 22:13 [PATCH v5 0/8] Broadcom stb, nsp, ns2, cygnus QSPI driver Kamal Dasu
2016-07-29 22:13 ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 1/8] Documentation: dt: spi: Add BRCMSTB SoC bindings Kamal Dasu
2016-07-29 22:13 ` Kamal Dasu
2016-08-04 21:06 ` Mark Brown
2016-08-04 21:06 ` Mark Brown
2016-08-04 22:20 ` Florian Fainelli
2016-08-04 22:20 ` Florian Fainelli
2016-08-05 11:03 ` Mark Brown
2016-08-05 11:03 ` Mark Brown
2016-08-16 18:19 ` Mark Brown
2016-08-16 18:19 ` Mark Brown
2016-08-19 15:07 ` Kamal Dasu
2016-08-19 15:07 ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 2/8] spi: bcm-qspi: Add Broadcom MSPI driver Kamal Dasu
2016-07-29 22:13 ` Kamal Dasu
2016-08-16 18:15 ` Mark Brown
2016-08-16 18:15 ` Mark Brown
2016-08-19 15:20 ` Kamal Dasu
2016-08-19 15:20 ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 3/8] spi: bcm-qspi: Add BSPI spi-nor flash controller driver Kamal Dasu
2016-07-29 22:13 ` Kamal Dasu
2016-08-16 18:31 ` Mark Brown
2016-08-16 18:31 ` Mark Brown
2016-08-19 15:33 ` Kamal Dasu
2016-08-19 15:33 ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 4/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer Kamal Dasu
2016-07-29 22:13 ` Kamal Dasu
2016-08-04 21:07 ` Mark Brown
2016-08-04 21:07 ` Mark Brown
2016-08-19 14:59 ` Kamal Dasu
2016-08-19 14:59 ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 5/8] Documentation: dt: spi: Add Broadcom NSP, NS2 SoC bindings Kamal Dasu
2016-07-29 22:13 ` Kamal Dasu
2016-08-16 18:32 ` Mark Brown
2016-08-16 18:32 ` Mark Brown
2016-07-29 22:13 ` [PATCH v5 6/8] arm: dts: Add bcm-nsp and bcm958625k support Kamal Dasu
2016-07-29 22:13 ` Kamal Dasu
2016-08-01 15:09 ` Jonas Gorski
2016-08-01 15:09 ` Jonas Gorski
2016-08-02 19:51 ` Kamal Dasu
2016-08-02 19:51 ` Kamal Dasu
2016-07-29 22:13 ` Kamal Dasu [this message]
2016-07-29 22:13 ` [PATCH v5 7/8] arm64: dts: Add ns2 SoC support Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 8/8] spi: nsp-qspi: Add Broadcom NSP, NS2, Cygnus " Kamal Dasu
2016-07-29 22:13 ` Kamal Dasu
2016-08-16 18:40 ` Mark Brown
2016-08-16 18:40 ` Mark Brown
2016-08-19 15:43 ` Kamal Dasu
2016-08-19 15:43 ` Kamal Dasu
2016-08-19 16:42 ` Mark Brown
2016-08-19 16:42 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469830393-13295-8-git-send-email-kdasu.kdev@gmail.com \
--to=kdasu.kdev@gmail.com \
--cc=andy.fung@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=broonie@kernel.org \
--cc=f.fainelli@gmail.com \
--cc=jchandra@broadcom.com \
--cc=jon.mason@broadcom.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=vigneshr@ti.com \
--cc=vikram.prakash@broadcom.com \
--cc=yendapally.reddy@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.