All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sricharan R <sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: will.deacon-5wv7dgnIgG8@public.gmane.org,
	robin.murphy-5wv7dgnIgG8@public.gmane.org,
	joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org,
	iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org
Cc: sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
Subject: [PATCH 2/8] of: dma: Move range size workaround to of_dma_get_range()
Date: Tue,  9 Aug 2016 04:19:04 +0530	[thread overview]
Message-ID: <1470696550-3416-3-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1470696550-3416-1-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

From: Laurent Pinchart <laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>

Invalid dma-ranges values should be worked around when retrieving the
DMA range in of_dma_get_range(), not by all callers of the function.
This isn't much of a problem now that we have a single caller, but that
situation will change when moving DMA configuration to device probe
time.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
---
 drivers/of/address.c | 20 ++++++++++++++++++--
 drivers/of/device.c  | 15 ---------------
 2 files changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/of/address.c b/drivers/of/address.c
index 0a553c0..8cb1aee 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -817,8 +817,8 @@ EXPORT_SYMBOL(of_io_request_and_map);
  *	CPU addr (phys_addr_t)	: pna cells
  *	size			: nsize cells
  *
- * It returns -ENODEV if "dma-ranges" property was not found
- * for this device in DT.
+ * Return 0 on success, -ENODEV if the "dma-ranges" property was not found for
+ * this device in DT, or -EINVAL if the CPU address or size is invalid.
  */
 int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size)
 {
@@ -879,6 +879,22 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
 	*dma_addr = dmaaddr;
 
 	*size = of_read_number(ranges + naddr + pna, nsize);
+	/*
+	 * DT nodes sometimes incorrectly set the size as a mask. Work around
+	 * those incorrect DT by computing the size as mask + 1.
+	 */
+	if (*size & 1) {
+		pr_warn("%s: size 0x%llx for dma-range in node(%s) set as mask\n",
+			__func__, *size, np->full_name);
+		*size = *size + 1;
+	}
+
+	if (!*size) {
+		pr_err("%s: invalid size zero for dma-range in node(%s)\n",
+		       __func__, np->full_name);
+		ret = -EINVAL;
+		goto out;
+	}
 
 	pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
 		 *dma_addr, *paddr, *size);
diff --git a/drivers/of/device.c b/drivers/of/device.c
index fd5cfad..d9898d9 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -110,21 +110,6 @@ void of_dma_configure(struct device *dev, struct device_node *np)
 		size = dev->coherent_dma_mask + 1;
 	} else {
 		offset = PFN_DOWN(paddr - dma_addr);
-
-		/*
-		 * Add a work around to treat the size as mask + 1 in case
-		 * it is defined in DT as a mask.
-		 */
-		if (size & 1) {
-			dev_warn(dev, "Invalid size 0x%llx for dma-range\n",
-				 size);
-			size = size + 1;
-		}
-
-		if (!size) {
-			dev_err(dev, "Adjusted size 0x%llx invalid\n", size);
-			return;
-		}
 		dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
 	}
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sricharan@codeaurora.org (Sricharan R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/8] of: dma: Move range size workaround to of_dma_get_range()
Date: Tue,  9 Aug 2016 04:19:04 +0530	[thread overview]
Message-ID: <1470696550-3416-3-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1470696550-3416-1-git-send-email-sricharan@codeaurora.org>

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Invalid dma-ranges values should be worked around when retrieving the
DMA range in of_dma_get_range(), not by all callers of the function.
This isn't much of a problem now that we have a single caller, but that
situation will change when moving DMA configuration to device probe
time.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/of/address.c | 20 ++++++++++++++++++--
 drivers/of/device.c  | 15 ---------------
 2 files changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/of/address.c b/drivers/of/address.c
index 0a553c0..8cb1aee 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -817,8 +817,8 @@ EXPORT_SYMBOL(of_io_request_and_map);
  *	CPU addr (phys_addr_t)	: pna cells
  *	size			: nsize cells
  *
- * It returns -ENODEV if "dma-ranges" property was not found
- * for this device in DT.
+ * Return 0 on success, -ENODEV if the "dma-ranges" property was not found for
+ * this device in DT, or -EINVAL if the CPU address or size is invalid.
  */
 int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size)
 {
@@ -879,6 +879,22 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
 	*dma_addr = dmaaddr;
 
 	*size = of_read_number(ranges + naddr + pna, nsize);
+	/*
+	 * DT nodes sometimes incorrectly set the size as a mask. Work around
+	 * those incorrect DT by computing the size as mask + 1.
+	 */
+	if (*size & 1) {
+		pr_warn("%s: size 0x%llx for dma-range in node(%s) set as mask\n",
+			__func__, *size, np->full_name);
+		*size = *size + 1;
+	}
+
+	if (!*size) {
+		pr_err("%s: invalid size zero for dma-range in node(%s)\n",
+		       __func__, np->full_name);
+		ret = -EINVAL;
+		goto out;
+	}
 
 	pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
 		 *dma_addr, *paddr, *size);
diff --git a/drivers/of/device.c b/drivers/of/device.c
index fd5cfad..d9898d9 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -110,21 +110,6 @@ void of_dma_configure(struct device *dev, struct device_node *np)
 		size = dev->coherent_dma_mask + 1;
 	} else {
 		offset = PFN_DOWN(paddr - dma_addr);
-
-		/*
-		 * Add a work around to treat the size as mask + 1 in case
-		 * it is defined in DT as a mask.
-		 */
-		if (size & 1) {
-			dev_warn(dev, "Invalid size 0x%llx for dma-range\n",
-				 size);
-			size = size + 1;
-		}
-
-		if (!size) {
-			dev_err(dev, "Adjusted size 0x%llx invalid\n", size);
-			return;
-		}
 		dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
 	}
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2016-08-08 22:49 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-08 22:49 [PATCH 0/8] IOMMU Probe deferral support Sricharan R
2016-08-08 22:49 ` Sricharan R
     [not found] ` <1470696550-3416-1-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-08 22:49   ` [PATCH 1/8] arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() Sricharan R
2016-08-08 22:49     ` Sricharan R
     [not found]     ` <1470696550-3416-2-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-09-02  8:16       ` Marek Szyprowski
2016-09-02  8:16         ` Marek Szyprowski
     [not found]         ` <16c9743e-e531-25aa-76f1-8746a6b8ef11-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-09-07  6:24           ` Sricharan
2016-09-07  6:24             ` Sricharan
2016-08-08 22:49   ` Sricharan R [this message]
2016-08-08 22:49     ` [PATCH 2/8] of: dma: Move range size workaround to of_dma_get_range() Sricharan R
2016-08-08 22:49   ` [PATCH 3/8] of: dma: Make of_dma_deconfigure() public Sricharan R
2016-08-08 22:49     ` Sricharan R
2016-08-08 22:49   ` [PATCH 4/8] of: dma: Split of_configure_dma() into mask and ops configuration Sricharan R
2016-08-08 22:49     ` Sricharan R
     [not found]     ` <1470696550-3416-5-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-12  7:31       ` Tomasz Figa
2016-08-12  7:31         ` Tomasz Figa
     [not found]         ` <CAAFQd5BkpHrF=2=UXFA2mPKe0VQAD3J_XSNrZYHP0br5hw=Gsw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-08-12 15:18           ` Laurent Pinchart
2016-08-12 15:18             ` Laurent Pinchart
2016-08-12 15:45             ` Sricharan
2016-08-12 15:45               ` Sricharan
2016-09-09  6:53       ` Magnus Damm
2016-09-09  6:53         ` Magnus Damm
     [not found]         ` <CANqRtoRVRrP9dc3qc-xSE_Wct2HPznzzi1hdrHeC8h2gA=JcKg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-09-09  9:48           ` Sricharan
2016-09-09  9:48             ` Sricharan
2016-08-08 22:49   ` [PATCH 5/8] drivers: platform: Configure dma operations at probe time Sricharan R
2016-08-08 22:49     ` Sricharan R
     [not found]     ` <1470696550-3416-6-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-16  9:25       ` Laurent Pinchart
2016-08-16  9:25         ` Laurent Pinchart
2016-08-16 12:28         ` Sricharan
2016-08-16 12:28           ` Sricharan
2016-08-08 22:49   ` [PATCH 6/8] drivers: platform: Remove call to of_dma_(con/decon)figure_ops Sricharan R
2016-08-08 22:49     ` Sricharan R
     [not found]     ` <1470696550-3416-7-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-12  7:33       ` Tomasz Figa
2016-08-12  7:33         ` Tomasz Figa
     [not found]         ` <CAAFQd5DZ0ZpW2eEm8Bvh8=di6kOgUG4bGY_iTNbVBHsj0KPmeg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-08-12 15:42           ` Sricharan
2016-08-12 15:42             ` Sricharan
2016-08-08 22:49   ` [PATCH 7/8] iommu: of: Handle IOMMU lookup failure with deferred probing or error Sricharan R
2016-08-08 22:49     ` Sricharan R
     [not found]     ` <1470696550-3416-8-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-12  7:46       ` Tomasz Figa
2016-08-12  7:46         ` Tomasz Figa
     [not found]         ` <CAAFQd5C8BuOCc5ySw_3tVELDG4S+r_5VyDvOPnBBuVr-6CBfxg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-08-12 15:40           ` Sricharan
2016-08-12 15:40             ` Sricharan
2016-09-02  8:09             ` Marek Szyprowski
2016-09-02  8:09               ` Marek Szyprowski
     [not found]               ` <1c5dde1d-1ffb-d045-c090-032b9f1c7de2-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-09-07  6:16                 ` Sricharan
2016-09-07  6:16                   ` Sricharan
2016-09-02 12:52       ` Marek Szyprowski
2016-09-02 12:52         ` Marek Szyprowski
     [not found]         ` <17b1ff0a-6619-cd45-28cd-70bf79bdcc47-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-09-07  6:29           ` Sricharan
2016-09-07  6:29             ` Sricharan
2016-08-08 22:49   ` [PATCH 8/8] drivers: iommu: arm-smmu: Set iommu_ops in probe Sricharan R
2016-08-08 22:49     ` Sricharan R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1470696550-3416-3-git-send-email-sricharan@codeaurora.org \
    --to=sricharan-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
    --cc=joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org \
    --cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=robin.murphy-5wv7dgnIgG8@public.gmane.org \
    --cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.