From: Krzysztof Kozlowski <krzk@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Lee Jones <lee.jones@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
rtc-linux@googlegroups.com
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 2/4] regulator: Enable compile testing for Maxim and Samsung PMIC drivers
Date: Sun, 2 Oct 2016 22:58:15 +0200 [thread overview]
Message-ID: <1475441897-15730-3-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1475441897-15730-1-git-send-email-krzk@kernel.org>
Most of Maxim and Samsung PMIC/MUIC regulator drivers can be compile
tested to increase build coverage.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/regulator/Kconfig | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 936f7ccc9736..1ce7e3633b63 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -379,7 +379,7 @@ config REGULATOR_MAX1586
config REGULATOR_MAX77620
tristate "Maxim 77620/MAX20024 voltage regulator"
- depends on MFD_MAX77620
+ depends on MFD_MAX77620 || COMPILE_TEST
help
This driver controls Maxim MAX77620 voltage output regulator
via I2C bus. The provided regulator is suitable for Tegra
@@ -453,7 +453,7 @@ config REGULATOR_MAX8998
config REGULATOR_MAX77686
tristate "Maxim 77686 regulator"
- depends on MFD_MAX77686
+ depends on MFD_MAX77686 || COMPILE_TEST
help
This driver controls a Maxim 77686 regulator
via I2C bus. The provided regulator is suitable for
@@ -461,7 +461,7 @@ config REGULATOR_MAX77686
config REGULATOR_MAX77693
tristate "Maxim 77693/77843 regulator"
- depends on (MFD_MAX77693 || MFD_MAX77843)
+ depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST
help
This driver controls a Maxim 77693/77843 regulators via I2C bus.
The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
@@ -470,7 +470,7 @@ config REGULATOR_MAX77693
config REGULATOR_MAX77802
tristate "Maxim 77802 regulator"
- depends on MFD_MAX77686
+ depends on MFD_MAX77686 || COMPILE_TEST
help
This driver controls a Maxim 77802 regulator
via I2C bus. The provided regulator is suitable for
@@ -669,14 +669,14 @@ config REGULATOR_RT5033
config REGULATOR_S2MPA01
tristate "Samsung S2MPA01 voltage regulator"
- depends on MFD_SEC_CORE
+ depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver controls Samsung S2MPA01 voltage output regulator
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
- depends on MFD_SEC_CORE
+ depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
output regulator via I2C bus. The chip is comprised of high efficient
@@ -685,7 +685,7 @@ config REGULATOR_S2MPS11
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
- depends on MFD_SEC_CORE
+ depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver supports a Samsung S5M8767A voltage output regulator
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Lee Jones <lee.jones@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@free-electrons.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
rtc-linux@googlegroups.com
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [rtc-linux] [PATCH 2/4] regulator: Enable compile testing for Maxim and Samsung PMIC drivers
Date: Sun, 2 Oct 2016 22:58:15 +0200 [thread overview]
Message-ID: <1475441897-15730-3-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1475441897-15730-1-git-send-email-krzk@kernel.org>
Most of Maxim and Samsung PMIC/MUIC regulator drivers can be compile
tested to increase build coverage.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
drivers/regulator/Kconfig | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 936f7ccc9736..1ce7e3633b63 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -379,7 +379,7 @@ config REGULATOR_MAX1586
config REGULATOR_MAX77620
tristate "Maxim 77620/MAX20024 voltage regulator"
- depends on MFD_MAX77620
+ depends on MFD_MAX77620 || COMPILE_TEST
help
This driver controls Maxim MAX77620 voltage output regulator
via I2C bus. The provided regulator is suitable for Tegra
@@ -453,7 +453,7 @@ config REGULATOR_MAX8998
config REGULATOR_MAX77686
tristate "Maxim 77686 regulator"
- depends on MFD_MAX77686
+ depends on MFD_MAX77686 || COMPILE_TEST
help
This driver controls a Maxim 77686 regulator
via I2C bus. The provided regulator is suitable for
@@ -461,7 +461,7 @@ config REGULATOR_MAX77686
config REGULATOR_MAX77693
tristate "Maxim 77693/77843 regulator"
- depends on (MFD_MAX77693 || MFD_MAX77843)
+ depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST
help
This driver controls a Maxim 77693/77843 regulators via I2C bus.
The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
@@ -470,7 +470,7 @@ config REGULATOR_MAX77693
config REGULATOR_MAX77802
tristate "Maxim 77802 regulator"
- depends on MFD_MAX77686
+ depends on MFD_MAX77686 || COMPILE_TEST
help
This driver controls a Maxim 77802 regulator
via I2C bus. The provided regulator is suitable for
@@ -669,14 +669,14 @@ config REGULATOR_RT5033
config REGULATOR_S2MPA01
tristate "Samsung S2MPA01 voltage regulator"
- depends on MFD_SEC_CORE
+ depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver controls Samsung S2MPA01 voltage output regulator
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
- depends on MFD_SEC_CORE
+ depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
output regulator via I2C bus. The chip is comprised of high efficient
@@ -685,7 +685,7 @@ config REGULATOR_S2MPS11
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
- depends on MFD_SEC_CORE
+ depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver supports a Samsung S5M8767A voltage output regulator
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
--
2.7.4
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2016-10-02 20:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-02 20:58 [PATCH 0/4] clk/mfd/regulator/rtc: Enable compile testing for some Maxim/Samsung drivers Krzysztof Kozlowski
2016-10-02 20:58 ` [rtc-linux] " Krzysztof Kozlowski
2016-10-02 20:58 ` [PATCH 1/4] clk: Enable compile testing for s2mps11 and max77686 Krzysztof Kozlowski
2016-10-02 20:58 ` [rtc-linux] " Krzysztof Kozlowski
2016-11-02 0:33 ` Stephen Boyd
2016-11-02 0:33 ` [rtc-linux] " Stephen Boyd
2016-10-02 20:58 ` Krzysztof Kozlowski [this message]
2016-10-02 20:58 ` [rtc-linux] [PATCH 2/4] regulator: Enable compile testing for Maxim and Samsung PMIC drivers Krzysztof Kozlowski
2016-10-04 2:40 ` Mark Brown
2016-10-04 2:40 ` [rtc-linux] " Mark Brown
2016-10-04 9:30 ` Krzysztof Kozlowski
2016-10-04 9:30 ` [rtc-linux] " Krzysztof Kozlowski
2016-10-02 20:58 ` [PATCH 3/4] rtc: Enable compile testing for Maxim and Samsung drivers Krzysztof Kozlowski
2016-10-02 20:58 ` [rtc-linux] " Krzysztof Kozlowski
2016-11-04 23:12 ` Alexandre Belloni
2016-11-04 23:12 ` [rtc-linux] " Alexandre Belloni
2016-10-02 20:58 ` [PATCH 4/4] mfd: Enable compile testing for max77620 and max77686 Krzysztof Kozlowski
2016-10-02 20:58 ` [rtc-linux] " Krzysztof Kozlowski
2016-10-26 12:19 ` Lee Jones
2016-10-26 12:19 ` [rtc-linux] " Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1475441897-15730-3-git-send-email-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=rtc-linux@googlegroups.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.