From: York Sun <york.sun@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 12/24] powerpc: T2081QDS: Remove macro T2081QDS
Date: Wed, 28 Dec 2016 08:43:38 -0800 [thread overview]
Message-ID: <1482943430-10231-13-git-send-email-york.sun@nxp.com> (raw)
In-Reply-To: <1482943430-10231-1-git-send-email-york.sun@nxp.com>
Use TARGET_T2081QDS from Kconfig instead.
Signed-off-by: York Sun <york.sun@nxp.com>
---
board/freescale/t208xqds/Makefile | 2 +-
board/freescale/t208xqds/eth_t208xqds.c | 16 ++++++++--------
board/freescale/t208xqds/t208xqds.c | 2 +-
include/configs/T208xQDS.h | 1 -
scripts/config_whitelist.txt | 1 -
5 files changed, 10 insertions(+), 12 deletions(-)
diff --git a/board/freescale/t208xqds/Makefile b/board/freescale/t208xqds/Makefile
index 3a6d030..587903a 100644
--- a/board/freescale/t208xqds/Makefile
+++ b/board/freescale/t208xqds/Makefile
@@ -8,7 +8,7 @@ ifdef CONFIG_SPL_BUILD
obj-y += spl.o
else
obj-$(CONFIG_TARGET_T2080QDS) += t208xqds.o eth_t208xqds.o
-obj-$(CONFIG_T2081QDS) += t208xqds.o eth_t208xqds.o
+obj-$(CONFIG_TARGET_T2081QDS) += t208xqds.o eth_t208xqds.o
obj-$(CONFIG_PCI) += pci.o
endif
diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c
index 59480a3..c880294 100644
--- a/board/freescale/t208xqds/eth_t208xqds.c
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -38,7 +38,7 @@
#define EMI1_SLOT4 4
#define EMI1_SLOT5 5
#define EMI2 7
-#elif defined(CONFIG_T2081QDS)
+#elif defined(CONFIG_TARGET_T2081QDS)
#define EMI1_SLOT2 3
#define EMI1_SLOT3 4
#define EMI1_SLOT5 5
@@ -68,7 +68,7 @@ static const char * const mdio_names[] = {
"T2080QDS_MDIO_SLOT5",
"T2080QDS_MDIO_SLOT2",
"T2080QDS_MDIO_10GC",
-#elif defined(CONFIG_T2081QDS)
+#elif defined(CONFIG_TARGET_T2081QDS)
"T2081QDS_MDIO_RGMII1",
"T2081QDS_MDIO_RGMII2",
"T2081QDS_MDIO_SLOT1",
@@ -84,7 +84,7 @@ static const char * const mdio_names[] = {
/* Map SerDes1 8 lanes to default slot, will be initialized dynamically */
#if defined(CONFIG_TARGET_T2080QDS)
static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1};
-#elif defined(CONFIG_T2081QDS)
+#elif defined(CONFIG_TARGET_T2081QDS)
static u8 lane_to_slot[] = {2, 2, 2, 2, 1, 1, 1, 1};
#endif
@@ -311,7 +311,7 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
fdt_status_okay_by_alias(fdt, "emi1_slot2");
}
break;
-#elif defined(CONFIG_T2081QDS)
+#elif defined(CONFIG_TARGET_T2081QDS)
case FM1_DTSEC1:
case FM1_DTSEC2:
case FM1_DTSEC5:
@@ -481,7 +481,7 @@ static void initialize_lane_to_slot(void)
lane_to_slot[6] = 3;
lane_to_slot[7] = 3;
break;
-#elif defined(CONFIG_T2081QDS)
+#elif defined(CONFIG_TARGET_T2081QDS)
case 0x6b:
lane_to_slot[4] = 1;
lane_to_slot[5] = 3;
@@ -556,7 +556,7 @@ int board_eth_init(bd_t *bis)
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
#endif
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
-#if defined(CONFIG_T2081QDS)
+#if defined(CONFIG_TARGET_T2081QDS)
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6);
t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
#endif
@@ -675,7 +675,7 @@ int board_eth_init(bd_t *bis)
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
break;
-#elif defined(CONFIG_T2081QDS)
+#elif defined(CONFIG_TARGET_T2081QDS)
case 0xca:
case 0xcb:
/* SGMII in Slot3 */
@@ -731,7 +731,7 @@ int board_eth_init(bd_t *bis)
fm_info_set_mdio(i, mii_dev_for_muxval(
mdio_mux[i]));
break;
-#if defined(CONFIG_T2081QDS)
+#if defined(CONFIG_TARGET_T2081QDS)
case 5:
mdio_mux[i] = EMI1_SLOT5;
fm_info_set_mdio(i, mii_dev_for_muxval(
diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c
index e307ccb..26093ea 100644
--- a/board/freescale/t208xqds/t208xqds.c
+++ b/board/freescale/t208xqds/t208xqds.c
@@ -191,7 +191,7 @@ int brd_mux_lane_to_slot(void)
*/
QIXIS_WRITE(brdcfg[12], 0x1a);
break;
-#elif defined(CONFIG_T2081QDS)
+#elif defined(CONFIG_TARGET_T2081QDS)
case 0x50:
case 0x51:
/* SD1(A:D) => SLOT2 XAUI
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 15da358..fd5cb72 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -20,7 +20,6 @@
#define CONFIG_SRIO1 /* SRIO port 1 */
#define CONFIG_SRIO2 /* SRIO port 2 */
#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_T2081QDS
#endif
/* High Level Configuration Options */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 161096b..99a6d25 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -7794,7 +7794,6 @@ CONFIG_SYS_XWAY_EBU_BOOTCFG
CONFIG_SYS_ZYNQ_QSPI_WAIT
CONFIG_SYS_ZYNQ_SPI_WAIT
CONFIG_SYS_i2C_FSL
-CONFIG_T2081QDS
CONFIG_TAM3517_SETTINGS
CONFIG_TAM3517_SW3_SETTINGS
CONFIG_TCA642X
--
2.7.4
next prev parent reply other threads:[~2016-12-28 16:43 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-28 16:43 [U-Boot] [PATCH 00/24] Lift mpc85xx config options to Kconfig York Sun
2016-12-28 16:43 ` [U-Boot] [PATCH 01/24] powerpc: E500: Move CONFIG_E500 and CONFIG_E500MC " York Sun
2017-01-05 13:28 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 02/24] powerpc: mpc85xx: Move CONFIG_SYS_NUM_TLBCAMS " York Sun
2017-01-05 13:28 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 03/24] powerpc: mpc85xx: Move CONFIG_SYS_PPC_E500_DEBUG_TLB " York Sun
2017-01-05 13:28 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 04/24] crypto: Move SYS_FSL_SEC_COMPAT into driver Kconfig York Sun
2017-01-05 13:28 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 05/24] crypto: Move CONFIG_SYS_FSL_SEC_LE and _BE to Kconfig York Sun
2017-01-05 13:28 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 06/24] powerpc: mpc85xx: Remove variant SoCs T1020/T1022/T1013/T1014 York Sun
2017-01-05 13:28 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 07/24] powerpc: T1023RDB: Remove macro CONFIG_T1023RDB York Sun
2017-01-05 13:28 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 08/24] powerpc: T1024RDB: Remove macro CONFIG_T1024RDB York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 09/24] powerpc: T1040QDS: Remove macro CONFIG_T1040QDS York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 10/24] powerpc: T2080QDS: Remove macro T2080QDS York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 11/24] powerpc: T2080RDB: Remove macro CONFIG_T2080RDB York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` York Sun [this message]
2017-01-05 13:29 ` [U-Boot] [U-Boot, 12/24] powerpc: T2081QDS: Remove macro T2081QDS Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 13/24] powerpc: T104xQDS: Remove macro CONFIG_T104xD4QDS York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 14/24] fsl_ddr: Move DDR config options to driver Kconfig York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 15/24] arm: layerscape: Move CONFIG_SYS_FSL_ERRATUM_* to Kconfig York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 16/24] mmc: move CONFIG_SYS_FSL_ERRATUM_ESDHC* " York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 17/24] powerpc: mpc85xx: Move CONFIG_SYS_FSL_ERRATUM_* " York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 18/24] ddr: fsl: Move macro CONFIG_NUM_DDR_CONTROLLERS " York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 19/24] ddr: fsl: Merge macro CONFIG_NUM_DDR_CONTROLLERS and CONFIG_SYS_NUM_DDR_CTRLS York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 20/24] ddr: fsl: Move CONFIG_SYS_FSL_DDR_VER to Kconfig York Sun
2017-01-05 13:29 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 21/24] powerpc: mpc85xx: Remove unused ifdef in config header York Sun
2017-01-05 13:30 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 22/24] powerpc: E6500: Move macro CONFIG_E6500 to Kconfig York Sun
2017-01-05 13:30 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 23/24] powerpc: mpc85xx: Move CONFIG_SYS_FSL_QORIQ_CHASSIS* " York Sun
2017-01-05 13:30 ` [U-Boot] [U-Boot, " Tom Rini
2016-12-28 16:43 ` [U-Boot] [PATCH 24/24] powerpc: mpc85xx: Move macro CONFIG_SYS_PPC64 " York Sun
2017-01-05 13:30 ` [U-Boot] [U-Boot, " Tom Rini
2017-01-05 13:28 ` [U-Boot] [PATCH 00/24] Lift mpc85xx config options " Tom Rini
2017-01-05 16:28 ` york sun
2017-01-05 17:34 ` york sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482943430-10231-13-git-send-email-york.sun@nxp.com \
--to=york.sun@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.