From: mhei@heimpold.de (Michael Heimpold)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/9] ARM: dts: imx28: add alternative pinmuxing for mmc2
Date: Sun, 22 Jan 2017 23:22:36 +0100 [thread overview]
Message-ID: <1485123764-14754-2-git-send-email-mhei@heimpold.de> (raw)
In-Reply-To: <1485123764-14754-1-git-send-email-mhei@heimpold.de>
From: Michael Heimpold <michael.heimpold@i2se.com>
Signed-off-by: Michael Heimpold <michael.heimpold@i2se.com>
---
arch/arm/boot/dts/imx28.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 3aabf65..bc5cf41 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -581,6 +581,22 @@
fsl,pull-up = <MXS_PULL_ENABLE>;
};
+ mmc2_4bit_pins_b: mmc2-4bit at 1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__SSP2_SCK
+ MX28_PAD_SSP2_MOSI__SSP2_CMD
+ MX28_PAD_SSP2_MISO__SSP2_D0
+ MX28_PAD_SSP2_SS0__SSP2_D3
+ MX28_PAD_SSP2_SS1__SSP2_D1
+ MX28_PAD_SSP2_SS2__SSP2_D2
+ MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
mmc2_cd_cfg: mmc2-cd-cfg {
fsl,pinmux-ids = <
MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Michael Heimpold <mhei@heimpold.de>
To: shawnguo@kernel.org, kernel@pengutronix.de, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: stefan.wahren@i2se.com, devicetree@vger.kernel.org,
Michael Heimpold <michael.heimpold@i2se.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/9] ARM: dts: imx28: add alternative pinmuxing for mmc2
Date: Sun, 22 Jan 2017 23:22:36 +0100 [thread overview]
Message-ID: <1485123764-14754-2-git-send-email-mhei@heimpold.de> (raw)
In-Reply-To: <1485123764-14754-1-git-send-email-mhei@heimpold.de>
From: Michael Heimpold <michael.heimpold@i2se.com>
Signed-off-by: Michael Heimpold <michael.heimpold@i2se.com>
---
arch/arm/boot/dts/imx28.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 3aabf65..bc5cf41 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -581,6 +581,22 @@
fsl,pull-up = <MXS_PULL_ENABLE>;
};
+ mmc2_4bit_pins_b: mmc2-4bit@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__SSP2_SCK
+ MX28_PAD_SSP2_MOSI__SSP2_CMD
+ MX28_PAD_SSP2_MISO__SSP2_D0
+ MX28_PAD_SSP2_SS0__SSP2_D3
+ MX28_PAD_SSP2_SS1__SSP2_D1
+ MX28_PAD_SSP2_SS2__SSP2_D2
+ MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
mmc2_cd_cfg: mmc2-cd-cfg {
fsl,pinmux-ids = <
MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
--
2.7.4
next prev parent reply other threads:[~2017-01-22 22:22 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-22 22:22 [PATCH v2 0/9] ARM: dts: support I2SE Duckbill devices Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold [this message]
2017-01-22 22:22 ` [PATCH v2 1/9] ARM: dts: imx28: add alternative pinmuxing for mmc2 Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 2/9] ARM: dts: imx28: rename mmc2_sck_cfg to prepare for an alternative muxing setup Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 3/9] ARM: dts: imx28: add alternative muxing for mmc2_sck_cfg Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 4/9] ARM: dts: imx28-duckbill: enable spi, i2c and uart pins Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-23 17:00 ` Stefan Wahren
2017-01-23 17:00 ` Stefan Wahren
2017-01-24 13:00 ` Shawn Guo
2017-01-24 13:00 ` Shawn Guo
2017-01-22 22:22 ` [PATCH v2 5/9] ARM: dts: add support for I2SE Duckbill 2 boards Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 6/9] ARM: dts: add support for I2SE Duckbill 2 485 Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-23 17:10 ` Stefan Wahren
2017-01-23 17:10 ` Stefan Wahren
2017-01-22 22:22 ` [PATCH v2 7/9] ARM: dts: add support for I2SE Duckbill 2 EnOcean Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 8/9] ARM: dts: add support for I2SE Duckbill 2 SPI Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-23 17:16 ` Stefan Wahren
2017-01-23 17:16 ` Stefan Wahren
2017-01-22 22:22 ` [PATCH v2 9/9] Documentation: DT: add entries for I2SE boards Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-23 17:20 ` Stefan Wahren
2017-01-23 17:20 ` Stefan Wahren
2017-01-23 17:05 ` [PATCH v2 0/9] ARM: dts: support I2SE Duckbill devices Stefan Wahren
2017-01-23 17:05 ` Stefan Wahren
2017-01-23 18:18 ` Fabio Estevam
2017-01-23 18:18 ` Fabio Estevam
2017-01-24 6:44 ` Michael Heimpold
2017-01-24 6:44 ` Michael Heimpold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485123764-14754-2-git-send-email-mhei@heimpold.de \
--to=mhei@heimpold.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.