From: stefan.wahren@i2se.com (Stefan Wahren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/9] ARM: dts: add support for I2SE Duckbill 2 485
Date: Mon, 23 Jan 2017 18:10:10 +0100 [thread overview]
Message-ID: <ff21bcf8-7699-025f-5129-e1906914ce42@i2se.com> (raw)
In-Reply-To: <1485123764-14754-7-git-send-email-mhei@heimpold.de>
Am 22.01.2017 um 23:22 schrieb Michael Heimpold:
> This machine is based on I2SE's Duckbill 2 board and features a
> RS-485 daugther board. This device is intended to be used for
> e.g. home automation purposes.
>
> Signed-off-by: Michael Heimpold <mhei@heimpold.de>
> Cc: Stefan Wahren <stefan.wahren@i2se.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx28-duckbill-2-485.dts | 189 +++++++++++++++++++++++++++++
> 2 files changed, 190 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx28-duckbill-2-485.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index fa4664b..e0f3f4e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -475,6 +475,7 @@ dtb-$(CONFIG_ARCH_MXS) += \
> imx28-cfa10056.dtb \
> imx28-cfa10057.dtb \
> imx28-cfa10058.dtb \
> + imx28-duckbill-2-485.dts \
The file ending should be dtb. This issue applies also to patch 7 and 8.
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
To: Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>,
shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Fabio Estevam <fabio.estevam-3arQi8VN3Tc@public.gmane.org>
Subject: Re: [PATCH v2 6/9] ARM: dts: add support for I2SE Duckbill 2 485
Date: Mon, 23 Jan 2017 18:10:10 +0100 [thread overview]
Message-ID: <ff21bcf8-7699-025f-5129-e1906914ce42@i2se.com> (raw)
In-Reply-To: <1485123764-14754-7-git-send-email-mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>
Am 22.01.2017 um 23:22 schrieb Michael Heimpold:
> This machine is based on I2SE's Duckbill 2 board and features a
> RS-485 daugther board. This device is intended to be used for
> e.g. home automation purposes.
>
> Signed-off-by: Michael Heimpold <mhei-Z/Lg1yOAjpkb1SvskN2V4Q@public.gmane.org>
> Cc: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx28-duckbill-2-485.dts | 189 +++++++++++++++++++++++++++++
> 2 files changed, 190 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx28-duckbill-2-485.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index fa4664b..e0f3f4e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -475,6 +475,7 @@ dtb-$(CONFIG_ARCH_MXS) += \
> imx28-cfa10056.dtb \
> imx28-cfa10057.dtb \
> imx28-cfa10058.dtb \
> + imx28-duckbill-2-485.dts \
The file ending should be dtb. This issue applies also to patch 7 and 8.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-01-23 17:10 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-22 22:22 [PATCH v2 0/9] ARM: dts: support I2SE Duckbill devices Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 1/9] ARM: dts: imx28: add alternative pinmuxing for mmc2 Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 2/9] ARM: dts: imx28: rename mmc2_sck_cfg to prepare for an alternative muxing setup Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 3/9] ARM: dts: imx28: add alternative muxing for mmc2_sck_cfg Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 4/9] ARM: dts: imx28-duckbill: enable spi, i2c and uart pins Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-23 17:00 ` Stefan Wahren
2017-01-23 17:00 ` Stefan Wahren
2017-01-24 13:00 ` Shawn Guo
2017-01-24 13:00 ` Shawn Guo
2017-01-22 22:22 ` [PATCH v2 5/9] ARM: dts: add support for I2SE Duckbill 2 boards Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 6/9] ARM: dts: add support for I2SE Duckbill 2 485 Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-23 17:10 ` Stefan Wahren [this message]
2017-01-23 17:10 ` Stefan Wahren
2017-01-22 22:22 ` [PATCH v2 7/9] ARM: dts: add support for I2SE Duckbill 2 EnOcean Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-22 22:22 ` [PATCH v2 8/9] ARM: dts: add support for I2SE Duckbill 2 SPI Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-23 17:16 ` Stefan Wahren
2017-01-23 17:16 ` Stefan Wahren
2017-01-22 22:22 ` [PATCH v2 9/9] Documentation: DT: add entries for I2SE boards Michael Heimpold
2017-01-22 22:22 ` Michael Heimpold
2017-01-23 17:20 ` Stefan Wahren
2017-01-23 17:20 ` Stefan Wahren
2017-01-23 17:05 ` [PATCH v2 0/9] ARM: dts: support I2SE Duckbill devices Stefan Wahren
2017-01-23 17:05 ` Stefan Wahren
2017-01-23 18:18 ` Fabio Estevam
2017-01-23 18:18 ` Fabio Estevam
2017-01-24 6:44 ` Michael Heimpold
2017-01-24 6:44 ` Michael Heimpold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ff21bcf8-7699-025f-5129-e1906914ce42@i2se.com \
--to=stefan.wahren@i2se.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.