From: jagan@openedev.com (Jagan Teki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/9] ARM: dts: imx6dl-icore-rqs: Add sgtl5000 codec node
Date: Thu, 6 Apr 2017 23:32:10 +0530 [thread overview]
Message-ID: <1491501735-1649-5-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1491501735-1649-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
- Moved sound card node to imx6qdl-icore-rqs.dtsi
- Added codec node in imx6dl-icore-rqs
- Replace codec: sgtl5000 at 0a => sgtl5000: codec at a
on imx6q-icore-rqs.dts to [label:] node-name[@unit-address]
according to devicetree specification from ePAPER v1.1
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3:
- squash previous [PATCH v2 10/15] and [PATCH v2 11/15]
Changes for v2:
- Newly added patch
arch/arm/boot/dts/imx6dl-icore-rqs.dts | 11 +++++++++++
arch/arm/boot/dts/imx6q-icore-rqs.dts | 15 +--------------
arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 13 +++++++++++++
3 files changed, 25 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
index cf42c2f..053e7cb 100644
--- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
@@ -49,3 +49,14 @@
model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
};
+
+&i2c3 {
+ sgtl5000: codec at a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ VDDD-supply = <®_1p8v>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
index e451b4c..d45e4f5 100644
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -47,23 +47,10 @@
/ {
model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
-
- sound {
- compatible = "fsl,imx-audio-sgtl5000";
- model = "imx-audio-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <4>;
- };
};
&i2c3 {
- codec: sgtl5000 at 0a {
+ sgtl5000: codec at a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index 5fab5be..d24e531 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -118,6 +118,19 @@
clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
clock-names = "refclk";
};
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx-audio-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
};
&clks {
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@openedev.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Matteo Lisi <matteo.lisi@engicam.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v3 4/9] ARM: dts: imx6dl-icore-rqs: Add sgtl5000 codec node
Date: Thu, 6 Apr 2017 23:32:10 +0530 [thread overview]
Message-ID: <1491501735-1649-5-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1491501735-1649-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
- Moved sound card node to imx6qdl-icore-rqs.dtsi
- Added codec node in imx6dl-icore-rqs
- Replace codec: sgtl5000@0a => sgtl5000: codec@a
on imx6q-icore-rqs.dts to [label:] node-name[@unit-address]
according to devicetree specification from ePAPER v1.1
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3:
- squash previous [PATCH v2 10/15] and [PATCH v2 11/15]
Changes for v2:
- Newly added patch
arch/arm/boot/dts/imx6dl-icore-rqs.dts | 11 +++++++++++
arch/arm/boot/dts/imx6q-icore-rqs.dts | 15 +--------------
arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 13 +++++++++++++
3 files changed, 25 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
index cf42c2f..053e7cb 100644
--- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
@@ -49,3 +49,14 @@
model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
};
+
+&i2c3 {
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ VDDD-supply = <®_1p8v>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
index e451b4c..d45e4f5 100644
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -47,23 +47,10 @@
/ {
model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
-
- sound {
- compatible = "fsl,imx-audio-sgtl5000";
- model = "imx-audio-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&codec>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <4>;
- };
};
&i2c3 {
- codec: sgtl5000@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index 5fab5be..d24e531 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -118,6 +118,19 @@
clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
clock-names = "refclk";
};
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx-audio-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
};
&clks {
--
1.9.1
next prev parent reply other threads:[~2017-04-06 18:02 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-06 18:02 [PATCH v3 0/9] ARM: dts: i.MX6: Add lcdif/sound nodes on Engicam SOMs Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-06 18:02 ` [PATCH v3 1/9] ARM: dts: imx6ul-isiot: Add Sound card with codec node Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-07 13:16 ` Shawn Guo
2017-04-07 13:16 ` Shawn Guo
2017-04-07 13:16 ` Shawn Guo
2017-06-14 14:47 ` Jagan Teki
2017-06-14 14:47 ` Jagan Teki
2017-06-14 14:47 ` Jagan Teki
2017-06-15 2:20 ` Shawn Guo
2017-06-15 2:20 ` Shawn Guo
2017-06-15 2:20 ` Shawn Guo
2017-06-15 4:51 ` Jagan Teki
2017-06-15 4:51 ` Jagan Teki
2017-06-15 7:15 ` Shawn Guo
2017-06-15 7:15 ` Shawn Guo
2017-06-15 7:31 ` Jagan Teki
2017-06-15 7:31 ` Jagan Teki
2017-06-15 7:51 ` Shawn Guo
2017-06-15 7:51 ` Shawn Guo
2017-06-15 7:51 ` Shawn Guo
2017-06-15 13:15 ` Jagan Teki
2017-06-15 13:15 ` Jagan Teki
2017-06-15 13:15 ` Jagan Teki
2017-04-06 18:02 ` [PATCH v3 2/9] ARM: dts: imx6ul-geam: " Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-07 13:19 ` Shawn Guo
2017-04-07 13:19 ` Shawn Guo
2017-04-07 13:19 ` Shawn Guo
2017-04-06 18:02 ` [PATCH v3 3/9] ARM: dts: imx6qdl-icore: " Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-07 13:23 ` Shawn Guo
2017-04-07 13:23 ` Shawn Guo
2017-04-07 13:23 ` Shawn Guo
2017-04-06 18:02 ` Jagan Teki [this message]
2017-04-06 18:02 ` [PATCH v3 4/9] ARM: dts: imx6dl-icore-rqs: Add sgtl5000 " Jagan Teki
2017-04-06 18:02 ` [PATCH v3 5/9] ARM: dts: imx6qdl-icore-rqs: Replace to use simple-audio-card Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-06 18:02 ` [PATCH v3 6/9] ARM: dts: imx6dl-icore: Add LVDS support Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-06 18:02 ` [PATCH v3 7/9] ARM: dts: imx6dl-icore: Add touchscreen node Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-06 18:02 ` [PATCH v3 8/9] ARM: dts: imx6qdl-icore-rqs: Add CAN nodes Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-06 18:02 ` [PATCH v3 9/9] ARM: dts: imx6ul-isiot: Add FEC node support Jagan Teki
2017-04-06 18:02 ` Jagan Teki
2017-04-06 18:02 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491501735-1649-5-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.