[PATCH v4 0/6] Fixup mtip32xx for scheduling

[PATCH v4 0/6] Fixup mtip32xx for scheduling

[Jens Axboe]

OK, I think we're getting there now. I dropped the RQF_RESERVED
and the tag helper, since mtip32xx can just call
blk_rq_is_passthrough() and know it's an internal request.

We can do another cleanup series of mtip32xx making the
internal requests use the normal blk end_io infrastructure,
and use the provider helpers for mapping data. I think
that should be done separately as a cleanup, keeping this series
as a straight forward conversion.

I've tested this on the following card:

[   56.394162] mtip32xx 0000:81:00.0: Model: P320h-MTFDGAR350SAH

and it works fine for me.

-- 
Jens Axboe

[PATCH 1/6] mtip32xx: get rid of 'atomic' argument to mtip_exec_internal_command()

[Jens Axboe]

All callers can safely block. Kill the atomic/block argument, and
remove the argument from all callers.

Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
---
 drivers/block/mtip32xx/mtip32xx.c | 148 +++++++++++---------------------------
 1 file changed, 43 insertions(+), 105 deletions(-)

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 02804cc79d82..d81d797ee65d 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -609,11 +609,6 @@ static void mtip_completion(struct mtip_port *port,
 	complete(waiting);
 }
 
-static void mtip_null_completion(struct mtip_port *port,
-			    int tag, struct mtip_cmd *command, int status)
-{
-}
-
 static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer,
 				dma_addr_t buffer_dma, unsigned int sectors);
 static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
@@ -1117,7 +1112,6 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 					dma_addr_t buffer,
 					int buf_len,
 					u32 opts,
-					gfp_t atomic,
 					unsigned long timeout)
 {
 	struct mtip_cmd_sg *command_sg;
@@ -1146,30 +1140,22 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 
 	clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
 
-	if (atomic == GFP_KERNEL) {
-		if (fis->command != ATA_CMD_STANDBYNOW1) {
-			/* wait for io to complete if non atomic */
-			if (mtip_quiesce_io(port,
-				MTIP_QUIESCE_IO_TIMEOUT_MS, atomic) < 0) {
-				dev_warn(&dd->pdev->dev,
-					"Failed to quiesce IO\n");
-				mtip_put_int_command(dd, int_cmd);
-				clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
-				wake_up_interruptible(&port->svc_wait);
-				return -EBUSY;
-			}
+	if (fis->command != ATA_CMD_STANDBYNOW1) {
+		/* wait for io to complete if non atomic */
+		if (mtip_quiesce_io(port,
+			MTIP_QUIESCE_IO_TIMEOUT_MS, GFP_KERNEL) < 0) {
+			dev_warn(&dd->pdev->dev, "Failed to quiesce IO\n");
+			mtip_put_int_command(dd, int_cmd);
+			clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
+			wake_up_interruptible(&port->svc_wait);
+			return -EBUSY;
 		}
-
-		/* Set the completion function and data for the command. */
-		int_cmd->comp_data = &wait;
-		int_cmd->comp_func = mtip_completion;
-
-	} else {
-		/* Clear completion - we're going to poll */
-		int_cmd->comp_data = NULL;
-		int_cmd->comp_func = mtip_null_completion;
 	}
 
+	/* Set the completion function and data for the command. */
+	int_cmd->comp_data = &wait;
+	int_cmd->comp_func = mtip_completion;
+
 	/* Copy the command to the command table */
 	memcpy(int_cmd->command, fis, fis_len*4);
 
@@ -1198,81 +1184,41 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 	/* Issue the command to the hardware */
 	mtip_issue_non_ncq_command(port, MTIP_TAG_INTERNAL);
 
-	if (atomic == GFP_KERNEL) {
-		/* Wait for the command to complete or timeout. */
-		if ((rv = wait_for_completion_interruptible_timeout(
-				&wait,
-				msecs_to_jiffies(timeout))) <= 0) {
-
-			if (rv == -ERESTARTSYS) { /* interrupted */
-				dev_err(&dd->pdev->dev,
-					"Internal command [%02X] was interrupted after %u ms\n",
-					fis->command,
-					jiffies_to_msecs(jiffies - start));
-				rv = -EINTR;
-				goto exec_ic_exit;
-			} else if (rv == 0) /* timeout */
-				dev_err(&dd->pdev->dev,
-					"Internal command did not complete [%02X] within timeout of  %lu ms\n",
-					fis->command, timeout);
-			else
-				dev_err(&dd->pdev->dev,
-					"Internal command [%02X] wait returned code [%d] after %lu ms - unhandled\n",
-					fis->command, rv, timeout);
-
-			if (mtip_check_surprise_removal(dd->pdev) ||
-				test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
-						&dd->dd_flag)) {
-				dev_err(&dd->pdev->dev,
-					"Internal command [%02X] wait returned due to SR\n",
-					fis->command);
-				rv = -ENXIO;
-				goto exec_ic_exit;
-			}
-			mtip_device_reset(dd); /* recover from timeout issue */
-			rv = -EAGAIN;
+	/* Wait for the command to complete or timeout. */
+	rv = wait_for_completion_interruptible_timeout(&wait,
+				msecs_to_jiffies(timeout));
+	if (rv <= 0) {
+		if (rv == -ERESTARTSYS) { /* interrupted */
+			dev_err(&dd->pdev->dev,
+				"Internal command [%02X] was interrupted after %u ms\n",
+				fis->command,
+				jiffies_to_msecs(jiffies - start));
+			rv = -EINTR;
 			goto exec_ic_exit;
-		}
-	} else {
-		u32 hba_stat, port_stat;
-
-		/* Spin for <timeout> checking if command still outstanding */
-		timeout = jiffies + msecs_to_jiffies(timeout);
-		while ((readl(port->cmd_issue[MTIP_TAG_INTERNAL])
-				& (1 << MTIP_TAG_INTERNAL))
-				&& time_before(jiffies, timeout)) {
-			if (mtip_check_surprise_removal(dd->pdev)) {
-				rv = -ENXIO;
-				goto exec_ic_exit;
-			}
-			if ((fis->command != ATA_CMD_STANDBYNOW1) &&
-				test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
-						&dd->dd_flag)) {
-				rv = -ENXIO;
-				goto exec_ic_exit;
-			}
-			port_stat = readl(port->mmio + PORT_IRQ_STAT);
-			if (!port_stat)
-				continue;
+		} else if (rv == 0) /* timeout */
+			dev_err(&dd->pdev->dev,
+				"Internal command did not complete [%02X] within timeout of  %lu ms\n",
+				fis->command, timeout);
+		else
+			dev_err(&dd->pdev->dev,
+				"Internal command [%02X] wait returned code [%d] after %lu ms - unhandled\n",
+				fis->command, rv, timeout);
 
-			if (port_stat & PORT_IRQ_ERR) {
-				dev_err(&dd->pdev->dev,
-					"Internal command [%02X] failed\n",
-					fis->command);
-				mtip_device_reset(dd);
-				rv = -EIO;
-				goto exec_ic_exit;
-			} else {
-				writel(port_stat, port->mmio + PORT_IRQ_STAT);
-				hba_stat = readl(dd->mmio + HOST_IRQ_STAT);
-				if (hba_stat)
-					writel(hba_stat,
-						dd->mmio + HOST_IRQ_STAT);
-			}
-			break;
+		if (mtip_check_surprise_removal(dd->pdev) ||
+			test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+					&dd->dd_flag)) {
+			dev_err(&dd->pdev->dev,
+				"Internal command [%02X] wait returned due to SR\n",
+				fis->command);
+			rv = -ENXIO;
+			goto exec_ic_exit;
 		}
+		mtip_device_reset(dd); /* recover from timeout issue */
+		rv = -EAGAIN;
+		goto exec_ic_exit;
 	}
 
+	rv = 0;
 	if (readl(port->cmd_issue[MTIP_TAG_INTERNAL])
 			& (1 << MTIP_TAG_INTERNAL)) {
 		rv = -ENXIO;
@@ -1391,7 +1337,6 @@ static int mtip_get_identify(struct mtip_port *port, void __user *user_buffer)
 				port->identify_dma,
 				sizeof(u16) * ATA_ID_WORDS,
 				0,
-				GFP_KERNEL,
 				MTIP_INT_CMD_TIMEOUT_MS)
 				< 0) {
 		rv = -1;
@@ -1477,7 +1422,6 @@ static int mtip_standby_immediate(struct mtip_port *port)
 					0,
 					0,
 					0,
-					GFP_ATOMIC,
 					timeout);
 	dbg_printk(MTIP_DRV_NAME "Time taken to complete standby cmd: %d ms\n",
 			jiffies_to_msecs(jiffies - start));
@@ -1523,7 +1467,6 @@ static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer,
 					buffer_dma,
 					sectors * ATA_SECT_SIZE,
 					0,
-					GFP_ATOMIC,
 					MTIP_INT_CMD_TIMEOUT_MS);
 }
 
@@ -1558,7 +1501,6 @@ static int mtip_get_smart_data(struct mtip_port *port, u8 *buffer,
 					buffer_dma,
 					ATA_SECT_SIZE,
 					0,
-					GFP_ATOMIC,
 					15000);
 }
 
@@ -1686,7 +1628,6 @@ static int mtip_send_trim(struct driver_data *dd, unsigned int lba,
 					dma_addr,
 					ATA_SECT_SIZE,
 					0,
-					GFP_KERNEL,
 					MTIP_TRIM_TIMEOUT_MS) < 0)
 		rv = -EIO;
 
@@ -1850,7 +1791,6 @@ static int exec_drive_task(struct mtip_port *port, u8 *command)
 				 0,
 				 0,
 				 0,
-				 GFP_KERNEL,
 				 to) < 0) {
 		return -1;
 	}
@@ -1946,7 +1886,6 @@ static int exec_drive_command(struct mtip_port *port, u8 *command,
 				 (xfer_sz ? dma_addr : 0),
 				 (xfer_sz ? ATA_SECT_SIZE * xfer_sz : 0),
 				 0,
-				 GFP_KERNEL,
 				 to)
 				 < 0) {
 		rv = -EFAULT;
@@ -2189,7 +2128,6 @@ static int exec_drive_taskfile(struct driver_data *dd,
 				 dma_buffer,
 				 transfer_size,
 				 0,
-				 GFP_KERNEL,
 				 timeout) < 0) {
 		err = -EIO;
 		goto abort;
-- 
2.7.4

[PATCH 2/6] mtip32xx: kill atomic argument to mtip_quiesce_io()

[Jens Axboe]

All callers now pass in GFP_KERNEL, get rid of the argument.

Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
---
 drivers/block/mtip32xx/mtip32xx.c | 20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index d81d797ee65d..36f3d34f2156 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -1035,14 +1035,12 @@ static bool mtip_pause_ncq(struct mtip_port *port,
  *
  * @port    Pointer to port data structure
  * @timeout Max duration to wait (ms)
- * @atomic  gfp_t flag to indicate blockable context or not
  *
  * return value
  *	0	Success
  *	-EBUSY  Commands still active
  */
-static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout,
-								gfp_t atomic)
+static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout)
 {
 	unsigned long to;
 	unsigned int n;
@@ -1053,18 +1051,12 @@ static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout,
 	to = jiffies + msecs_to_jiffies(timeout);
 	do {
 		if (test_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags) &&
-			test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags) &&
-			atomic == GFP_KERNEL) {
+			test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) {
 			msleep(20);
 			continue; /* svc thd is actively issuing commands */
 		}
 
-		if (atomic == GFP_KERNEL)
-			msleep(100);
-		else {
-			cpu_relax();
-			udelay(100);
-		}
+		msleep(100);
 
 		if (mtip_check_surprise_removal(port->dd->pdev))
 			goto err_fault;
@@ -1142,8 +1134,7 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 
 	if (fis->command != ATA_CMD_STANDBYNOW1) {
 		/* wait for io to complete if non atomic */
-		if (mtip_quiesce_io(port,
-			MTIP_QUIESCE_IO_TIMEOUT_MS, GFP_KERNEL) < 0) {
+		if (mtip_quiesce_io(port, MTIP_QUIESCE_IO_TIMEOUT_MS) < 0) {
 			dev_warn(&dd->pdev->dev, "Failed to quiesce IO\n");
 			mtip_put_int_command(dd, int_cmd);
 			clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
@@ -4106,8 +4097,7 @@ static int mtip_block_remove(struct driver_data *dd)
 		 * Explicitly wait here for IOs to quiesce,
 		 * as mtip_standby_drive usually won't wait for IOs.
 		 */
-		if (!mtip_quiesce_io(dd->port, MTIP_QUIESCE_IO_TIMEOUT_MS,
-								GFP_KERNEL))
+		if (!mtip_quiesce_io(dd->port, MTIP_QUIESCE_IO_TIMEOUT_MS))
 			mtip_standby_drive(dd);
 	}
 	else
-- 
2.7.4

[PATCH 3/6] mtip32xx: abstract out "are any commands active" helper

[Jens Axboe]

This is a prep patch for backoff in ->queue_rq() for non-ncq commands.

Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
---
 drivers/block/mtip32xx/mtip32xx.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 36f3d34f2156..aee94f260725 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -1030,6 +1030,22 @@ static bool mtip_pause_ncq(struct mtip_port *port,
 	return false;
 }
 
+static bool mtip_commands_active(struct mtip_port *port)
+{
+	unsigned int active;
+	unsigned int n;
+
+	/*
+	 * Ignore s_active bit 0 of array element 0.
+	 * This bit will always be set
+	 */
+	active = readl(port->s_active[0]) & 0xFFFFFFFE;
+	for (n = 1; n < port->dd->slot_groups; n++)
+		active |= readl(port->s_active[n]);
+
+	return active != 0;
+}
+
 /*
  * Wait for port to quiesce
  *
@@ -1043,8 +1059,7 @@ static bool mtip_pause_ncq(struct mtip_port *port,
 static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout)
 {
 	unsigned long to;
-	unsigned int n;
-	unsigned int active = 1;
+	bool active = true;
 
 	blk_mq_stop_hw_queues(port->dd->queue);
 
@@ -1061,14 +1076,7 @@ static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout)
 		if (mtip_check_surprise_removal(port->dd->pdev))
 			goto err_fault;
 
-		/*
-		 * Ignore s_active bit 0 of array element 0.
-		 * This bit will always be set
-		 */
-		active = readl(port->s_active[0]) & 0xFFFFFFFE;
-		for (n = 1; n < port->dd->slot_groups; n++)
-			active |= readl(port->s_active[n]);
-
+		active = mtip_commands_active(port);
 		if (!active)
 			break;
 	} while (time_before(jiffies, to));
-- 
2.7.4

[PATCH 4/6] mtip32xx: convert internal command issue to block IO path

[Jens Axboe]

The driver special cases certain things for command issue, depending
on whether it's an internal command or not. Make the internal commands
use the regular infrastructure for issuing IO.

Since this is an 8-group souped up AHCI variant, we have to deal
with NCQ vs non-queueable commands. Do this from the queue_rq
handler, by backing off unless the drive is idle.

Signed-off-by: Jens Axboe <axboe@fb.com>
---
 drivers/block/mtip32xx/mtip32xx.c | 103 +++++++++++++++++++++++++++-----------
 1 file changed, 73 insertions(+), 30 deletions(-)

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index aee94f260725..9749b099a914 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -195,7 +195,7 @@ static struct mtip_cmd *mtip_get_int_command(struct driver_data *dd)
 	if (mtip_check_surprise_removal(dd->pdev))
 		return NULL;
 
-	rq = blk_mq_alloc_request(dd->queue, 0, BLK_MQ_REQ_RESERVED);
+	rq = blk_mq_alloc_request(dd->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_RESERVED);
 	if (IS_ERR(rq))
 		return NULL;
 
@@ -1088,6 +1088,13 @@ static int mtip_quiesce_io(struct mtip_port *port, unsigned long timeout)
 	return -EFAULT;
 }
 
+struct mtip_int_cmd {
+	int fis_len;
+	dma_addr_t buffer;
+	int buf_len;
+	u32 opts;
+};
+
 /*
  * Execute an internal command and wait for the completion.
  *
@@ -1114,10 +1121,16 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 					u32 opts,
 					unsigned long timeout)
 {
-	struct mtip_cmd_sg *command_sg;
 	DECLARE_COMPLETION_ONSTACK(wait);
 	struct mtip_cmd *int_cmd;
 	struct driver_data *dd = port->dd;
+	struct request *rq;
+	struct mtip_int_cmd icmd = {
+		.fis_len = fis_len,
+		.buffer = buffer,
+		.buf_len = buf_len,
+		.opts = opts
+	};
 	int rv = 0;
 	unsigned long start;
 
@@ -1132,6 +1145,8 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 		dbg_printk(MTIP_DRV_NAME "Unable to allocate tag for PIO cmd\n");
 		return -EFAULT;
 	}
+	rq = blk_mq_rq_from_pdu(int_cmd);
+	rq->end_io_data = &icmd;
 
 	set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
 
@@ -1158,35 +1173,16 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 	/* Copy the command to the command table */
 	memcpy(int_cmd->command, fis, fis_len*4);
 
-	/* Populate the SG list */
-	int_cmd->command_header->opts =
-		 __force_bit2int cpu_to_le32(opts | fis_len);
-	if (buf_len) {
-		command_sg = int_cmd->command + AHCI_CMD_TBL_HDR_SZ;
-
-		command_sg->info =
-			__force_bit2int cpu_to_le32((buf_len-1) & 0x3FFFFF);
-		command_sg->dba	=
-			__force_bit2int cpu_to_le32(buffer & 0xFFFFFFFF);
-		command_sg->dba_upper =
-			__force_bit2int cpu_to_le32((buffer >> 16) >> 16);
-
-		int_cmd->command_header->opts |=
-			__force_bit2int cpu_to_le32((1 << 16));
-	}
-
-	/* Populate the command header */
-	int_cmd->command_header->byte_count = 0;
-
 	start = jiffies;
+	rq->timeout = timeout;
 
-	/* Issue the command to the hardware */
-	mtip_issue_non_ncq_command(port, MTIP_TAG_INTERNAL);
+	/* insert request and run queue */
+	blk_execute_rq_nowait(rq->q, NULL, rq, true, NULL);
+
+	wait_for_completion(&wait);
+	rv = int_cmd->status;
 
-	/* Wait for the command to complete or timeout. */
-	rv = wait_for_completion_interruptible_timeout(&wait,
-				msecs_to_jiffies(timeout));
-	if (rv <= 0) {
+	if (rv < 0) {
 		if (rv == -ERESTARTSYS) { /* interrupted */
 			dev_err(&dd->pdev->dev,
 				"Internal command [%02X] was interrupted after %u ms\n",
@@ -1217,7 +1213,6 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 		goto exec_ic_exit;
 	}
 
-	rv = 0;
 	if (readl(port->cmd_issue[MTIP_TAG_INTERNAL])
 			& (1 << MTIP_TAG_INTERNAL)) {
 		rv = -ENXIO;
@@ -3762,6 +3757,44 @@ static bool mtip_check_unal_depth(struct blk_mq_hw_ctx *hctx,
 	return false;
 }
 
+static int mtip_issue_reserved_cmd(struct blk_mq_hw_ctx *hctx,
+				   struct request *rq)
+{
+	struct driver_data *dd = hctx->queue->queuedata;
+	struct mtip_int_cmd *icmd = rq->end_io_data;
+	struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
+	struct mtip_cmd_sg *command_sg;
+
+	if (mtip_commands_active(dd->port))
+		return BLK_MQ_RQ_QUEUE_BUSY;
+
+	rq->end_io_data = NULL;
+
+	/* Populate the SG list */
+	cmd->command_header->opts =
+		 __force_bit2int cpu_to_le32(icmd->opts | icmd->fis_len);
+	if (icmd->buf_len) {
+		command_sg = cmd->command + AHCI_CMD_TBL_HDR_SZ;
+
+		command_sg->info =
+			__force_bit2int cpu_to_le32((icmd->buf_len-1) & 0x3FFFFF);
+		command_sg->dba	=
+			__force_bit2int cpu_to_le32(icmd->buffer & 0xFFFFFFFF);
+		command_sg->dba_upper =
+			__force_bit2int cpu_to_le32((icmd->buffer >> 16) >> 16);
+
+		cmd->command_header->opts |=
+			__force_bit2int cpu_to_le32((1 << 16));
+	}
+
+	/* Populate the command header */
+	cmd->command_header->byte_count = 0;
+
+	blk_mq_start_request(rq);
+	mtip_issue_non_ncq_command(dd->port, rq->tag);
+	return BLK_MQ_RQ_QUEUE_OK;
+}
+
 static int mtip_queue_rq(struct blk_mq_hw_ctx *hctx,
 			 const struct blk_mq_queue_data *bd)
 {
@@ -3770,6 +3803,9 @@ static int mtip_queue_rq(struct blk_mq_hw_ctx *hctx,
 
 	mtip_init_cmd_header(rq);
 
+	if (blk_rq_is_passthrough(rq))
+		return mtip_issue_reserved_cmd(hctx, rq);
+
 	if (unlikely(mtip_check_unal_depth(hctx, rq)))
 		return BLK_MQ_RQ_QUEUE_BUSY;
 
@@ -3825,8 +3861,14 @@ static enum blk_eh_timer_return mtip_cmd_timeout(struct request *req,
 {
 	struct driver_data *dd = req->q->queuedata;
 
-	if (reserved)
+	if (reserved) {
+		struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req);
+
+		cmd->status = -ETIME;
+		if (cmd->comp_func)
+			cmd->comp_func(dd->port, MTIP_TAG_INTERNAL, cmd, -ETIME);
 		goto exit_handler;
+	}
 
 	if (test_bit(req->tag, dd->port->cmds_to_issue))
 		goto exit_handler;
@@ -4063,6 +4105,7 @@ static void mtip_no_dev_cleanup(struct request *rq, void *data, bool reserv)
 	} else if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &dd->port->flags)) {
 
 		cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL);
+		cmd->status = -ENODEV;
 		if (cmd->comp_func)
 			cmd->comp_func(dd->port, MTIP_TAG_INTERNAL,
 					cmd, -ENODEV);
-- 
2.7.4

Re: [PATCH 4/6] mtip32xx: convert internal command issue to block IO path

[Christoph Hellwig]

Looks fine for now:

Reviewed-by: Christoph Hellwig <hch@lst.de>

But rather sooner than later we need to make this path at least go
through the normal end_request processing.  Without that we're just
bound to run into problems like we had with the tag changes again
when the driver is using the block layer APIs incompletely.

Re: [PATCH 4/6] mtip32xx: convert internal command issue to block IO path

[Jens Axboe]

On 05/02/2017 01:28 AM, Christoph Hellwig wrote:
> Looks fine for now:
> 
> Reviewed-by: Christoph Hellwig <hch@lst.de>
> 
> But rather sooner than later we need to make this path at least go
> through the normal end_request processing.  Without that we're just
> bound to run into problems like we had with the tag changes again
> when the driver is using the block layer APIs incompletely.

I completely agree, I'll see if I can find some time to do that
soon.

-- 
Jens Axboe

Re: [PATCH 4/6] mtip32xx: convert internal command issue to block IO path

[Jens Axboe]

On 05/02/2017 07:53 AM, Jens Axboe wrote:
> On 05/02/2017 01:28 AM, Christoph Hellwig wrote:
>> Looks fine for now:
>>
>> Reviewed-by: Christoph Hellwig <hch@lst.de>
>>
>> But rather sooner than later we need to make this path at least go
>> through the normal end_request processing.  Without that we're just
>> bound to run into problems like we had with the tag changes again
>> when the driver is using the block layer APIs incompletely.
> 
> I completely agree, I'll see if I can find some time to do that
> soon.

Seems like a fine thing to do over morning coffee. How about something
like the below? It's on top of the previous series. Basically this kills
the private completion handler and data, which were basically redundant
as they did nothing but spew a warning in case of an error.

It'd be nice to unify the INTERNAL and regular commands, but we don't
have to do that to use the block layer APIs. If someone else wants to do
that, be my guest.

It compiles and loads fine on my setup, did some basic testing it that
went fine. Would be nice if someone else could look it over as well, to
verify that I didn't drop any of the 0-vs-error setting. I think it's
fine, we just need to ensure that cmd->status is always set to the
appropriate error, then we propagate that through the mtip32xx softirq
handler to the block layer.

 mtip32xx.c |  194 +++++++++----------------------------------------------------
 mtip32xx.h |   10 ---
 2 files changed, 29 insertions(+), 175 deletions(-)

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 96fe6500e941..60b62a72bc22 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -205,66 +205,12 @@ static struct mtip_cmd *mtip_get_int_command(struct driver_data *dd)
 	return blk_mq_rq_to_pdu(rq);
 }
 
-static void mtip_put_int_command(struct driver_data *dd, struct mtip_cmd *cmd)
-{
-	blk_put_request(blk_mq_rq_from_pdu(cmd));
-}
-
-/*
- * Once we add support for one hctx per mtip group, this will change a bit
- */
-static struct request *mtip_rq_from_tag(struct driver_data *dd,
-					unsigned int tag)
-{
-	struct blk_mq_hw_ctx *hctx = dd->queue->queue_hw_ctx[0];
-
-	return blk_mq_tag_to_rq(hctx->tags, tag);
-}
-
 static struct mtip_cmd *mtip_cmd_from_tag(struct driver_data *dd,
 					  unsigned int tag)
 {
-	struct request *rq = mtip_rq_from_tag(dd, tag);
-
-	return blk_mq_rq_to_pdu(rq);
-}
-
-/*
- * IO completion function.
- *
- * This completion function is called by the driver ISR when a
- * command that was issued by the kernel completes. It first calls the
- * asynchronous completion function which normally calls back into the block
- * layer passing the asynchronous callback data, then unmaps the
- * scatter list associated with the completed command, and finally
- * clears the allocated bit associated with the completed command.
- *
- * @port   Pointer to the port data structure.
- * @tag    Tag of the command.
- * @data   Pointer to driver_data.
- * @status Completion status.
- *
- * return value
- *	None
- */
-static void mtip_async_complete(struct mtip_port *port,
-				int tag, struct mtip_cmd *cmd, int status)
-{
-	struct driver_data *dd = port->dd;
-	struct request *rq;
-
-	if (unlikely(!dd) || unlikely(!port))
-		return;
-
-	if (unlikely(status == PORT_IRQ_TF_ERR)) {
-		dev_warn(&port->dd->pdev->dev,
-			"Command tag %d failed due to TFE\n", tag);
-	}
-
-	rq = mtip_rq_from_tag(dd, tag);
+	struct blk_mq_hw_ctx *hctx = dd->queue->queue_hw_ctx[0];
 
-	cmd->status = status;
-	blk_mq_complete_request(rq);
+	return blk_mq_rq_to_pdu(blk_mq_tag_to_rq(hctx->tags, tag));
 }
 
 /*
@@ -581,38 +527,18 @@ static void print_tags(struct driver_data *dd,
 			"%d command(s) %s: tagmap [%s]", cnt, msg, tagmap);
 }
 
-/*
- * Internal command completion callback function.
- *
- * This function is normally called by the driver ISR when an internal
- * command completed. This function signals the command completion by
- * calling complete().
- *
- * @port   Pointer to the port data structure.
- * @tag    Tag of the command that has completed.
- * @data   Pointer to a completion structure.
- * @status Completion status.
- *
- * return value
- *	None
- */
-static void mtip_completion(struct mtip_port *port,
-			    int tag, struct mtip_cmd *command, int status)
-{
-	struct completion *waiting = command->comp_data;
-	if (unlikely(status == PORT_IRQ_TF_ERR))
-		dev_warn(&port->dd->pdev->dev,
-			"Internal command %d completed with TFE\n", tag);
-
-	command->comp_func = NULL;
-	command->comp_data = NULL;
-	complete(waiting);
-}
-
 static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer,
 				dma_addr_t buffer_dma, unsigned int sectors);
 static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
 						struct smart_attr *attrib);
+
+static void mtip_complete_command(struct mtip_cmd *cmd)
+{
+	struct request *req = blk_mq_rq_from_pdu(cmd);
+
+	blk_mq_complete_request(req);
+}
+
 /*
  * Handle an error.
  *
@@ -641,11 +567,7 @@ static void mtip_handle_tfe(struct driver_data *dd)
 	if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
 		cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL);
 		dbg_printk(MTIP_DRV_NAME " TFE for the internal command\n");
-
-		if (cmd->comp_data && cmd->comp_func) {
-			cmd->comp_func(port, MTIP_TAG_INTERNAL,
-					cmd, PORT_IRQ_TF_ERR);
-		}
+		mtip_complete_command(cmd);
 		return;
 	}
 
@@ -672,19 +594,9 @@ static void mtip_handle_tfe(struct driver_data *dd)
 				continue;
 
 			cmd = mtip_cmd_from_tag(dd, tag);
-			if (likely(cmd->comp_func)) {
-				set_bit(tag, tagaccum);
-				cmd_cnt++;
-				cmd->comp_func(port, tag, cmd, 0);
-			} else {
-				dev_err(&port->dd->pdev->dev,
-					"Missing completion func for tag %d",
-					tag);
-				if (mtip_check_surprise_removal(dd->pdev)) {
-					/* don't proceed further */
-					return;
-				}
-			}
+			mtip_complete_command(cmd);
+			set_bit(tag, tagaccum);
+			cmd_cnt++;
 		}
 	}
 
@@ -754,10 +666,8 @@ static void mtip_handle_tfe(struct driver_data *dd)
 					tag,
 					fail_reason != NULL ?
 						fail_reason : "unknown");
-					if (cmd->comp_func) {
-						cmd->comp_func(port, tag,
-							cmd, -ENODATA);
-					}
+					cmd->status = -ENODATA;
+					mtip_complete_command(cmd);
 					continue;
 				}
 			}
@@ -780,12 +690,8 @@ static void mtip_handle_tfe(struct driver_data *dd)
 			dev_warn(&port->dd->pdev->dev,
 				"retiring tag %d\n", tag);
 
-			if (cmd->comp_func)
-				cmd->comp_func(port, tag, cmd, PORT_IRQ_TF_ERR);
-			else
-				dev_warn(&port->dd->pdev->dev,
-					"Bad completion for tag %d\n",
-					tag);
+			cmd->status = -EIO;
+			mtip_complete_command(cmd);
 		}
 	}
 	print_tags(dd, "reissued (TFE)", tagaccum, cmd_cnt);
@@ -818,18 +724,7 @@ static inline void mtip_workq_sdbfx(struct mtip_port *port, int group,
 				continue;
 
 			command = mtip_cmd_from_tag(dd, tag);
-			if (likely(command->comp_func))
-				command->comp_func(port, tag, command, 0);
-			else {
-				dev_dbg(&dd->pdev->dev,
-					"Null completion for tag %d",
-					tag);
-
-				if (mtip_check_surprise_removal(
-					dd->pdev)) {
-					return;
-				}
-			}
+			mtip_complete_command(command);
 		}
 		completed >>= 1;
 	}
@@ -850,10 +745,7 @@ static inline void mtip_process_legacy(struct driver_data *dd, u32 port_stat)
 	if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) &&
 	    (cmd != NULL) && !(readl(port->cmd_issue[MTIP_TAG_INTERNAL])
 		& (1 << MTIP_TAG_INTERNAL))) {
-		if (cmd->comp_func) {
-			cmd->comp_func(port, MTIP_TAG_INTERNAL, cmd, 0);
-			return;
-		}
+		mtip_complete_command(cmd);
 	}
 
 	return;
@@ -1121,7 +1013,6 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 					u32 opts,
 					unsigned long timeout)
 {
-	DECLARE_COMPLETION_ONSTACK(wait);
 	struct mtip_cmd *int_cmd;
 	struct driver_data *dd = port->dd;
 	struct request *rq;
@@ -1146,7 +1037,7 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 		return -EFAULT;
 	}
 	rq = blk_mq_rq_from_pdu(int_cmd);
-	rq->end_io_data = &icmd;
+	rq->special = &icmd;
 
 	set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
 
@@ -1159,17 +1050,13 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 		/* wait for io to complete if non atomic */
 		if (mtip_quiesce_io(port, MTIP_QUIESCE_IO_TIMEOUT_MS) < 0) {
 			dev_warn(&dd->pdev->dev, "Failed to quiesce IO\n");
-			mtip_put_int_command(dd, int_cmd);
+			blk_mq_free_request(rq);
 			clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
 			wake_up_interruptible(&port->svc_wait);
 			return -EBUSY;
 		}
 	}
 
-	/* Set the completion function and data for the command. */
-	int_cmd->comp_data = &wait;
-	int_cmd->comp_func = mtip_completion;
-
 	/* Copy the command to the command table */
 	memcpy(int_cmd->command, fis, fis_len*4);
 
@@ -1177,11 +1064,9 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 	rq->timeout = timeout;
 
 	/* insert request and run queue */
-	blk_execute_rq_nowait(rq->q, NULL, rq, true, NULL);
+	blk_execute_rq(rq->q, NULL, rq, true);
 
-	wait_for_completion(&wait);
 	rv = int_cmd->status;
-
 	if (rv < 0) {
 		if (rv == -ERESTARTSYS) { /* interrupted */
 			dev_err(&dd->pdev->dev,
@@ -1223,7 +1108,7 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 	}
 exec_ic_exit:
 	/* Clear the allocated and active bits for the internal command. */
-	mtip_put_int_command(dd, int_cmd);
+	blk_mq_free_request(rq);
 	clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
 	if (rv >= 0 && mtip_pause_ncq(port, fis)) {
 		/* NCQ paused */
@@ -2378,12 +2263,6 @@ static void mtip_hw_submit_io(struct driver_data *dd, struct request *rq,
 				(nents << 16) | 5 | AHCI_CMD_PREFETCH);
 	command->command_header->byte_count = 0;
 
-	/*
-	 * Set the completion function and data for the command
-	 * within this layer.
-	 */
-	command->comp_data = dd;
-	command->comp_func = mtip_async_complete;
 	command->direction = dma_dir;
 
 	/*
@@ -3761,15 +3640,13 @@ static int mtip_issue_reserved_cmd(struct blk_mq_hw_ctx *hctx,
 				   struct request *rq)
 {
 	struct driver_data *dd = hctx->queue->queuedata;
-	struct mtip_int_cmd *icmd = rq->end_io_data;
+	struct mtip_int_cmd *icmd = rq->special;
 	struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
 	struct mtip_cmd_sg *command_sg;
 
 	if (mtip_commands_active(dd->port))
 		return BLK_MQ_RQ_QUEUE_BUSY;
 
-	rq->end_io_data = NULL;
-
 	/* Populate the SG list */
 	cmd->command_header->opts =
 		 __force_bit2int cpu_to_le32(icmd->opts | icmd->fis_len);
@@ -3857,9 +3734,7 @@ static enum blk_eh_timer_return mtip_cmd_timeout(struct request *req,
 		struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req);
 
 		cmd->status = -ETIME;
-		if (cmd->comp_func)
-			cmd->comp_func(dd->port, MTIP_TAG_INTERNAL, cmd, -ETIME);
-		goto exit_handler;
+		return BLK_EH_HANDLED;
 	}
 
 	if (test_bit(req->tag, dd->port->cmds_to_issue))
@@ -4087,21 +3962,10 @@ static int mtip_block_initialize(struct driver_data *dd)
 
 static void mtip_no_dev_cleanup(struct request *rq, void *data, bool reserv)
 {
-	struct driver_data *dd = (struct driver_data *)data;
-	struct mtip_cmd *cmd;
-
-	if (likely(!reserv)) {
-		cmd = blk_mq_rq_to_pdu(rq);
-		cmd->status = -ENODEV;
-		blk_mq_complete_request(rq);
-	} else if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &dd->port->flags)) {
+	struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
 
-		cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL);
-		cmd->status = -ENODEV;
-		if (cmd->comp_func)
-			cmd->comp_func(dd->port, MTIP_TAG_INTERNAL,
-					cmd, -ENODEV);
-	}
+	cmd->status = -ENODEV;
+	blk_mq_complete_request(rq);
 }
 
 /*
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index 57b41528a824..37b8e3e0bb78 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -333,16 +333,6 @@ struct mtip_cmd {
 
 	dma_addr_t command_dma; /* corresponding physical address */
 
-	void *comp_data; /* data passed to completion function comp_func() */
-	/*
-	 * Completion function called by the ISR upon completion of
-	 * a command.
-	 */
-	void (*comp_func)(struct mtip_port *port,
-				int tag,
-				struct mtip_cmd *cmd,
-				int status);
-
 	int scatter_ents; /* Number of scatter list entries used */
 
 	int unaligned; /* command is unaligned on 4k boundary */

-- 
Jens Axboe

Re: [PATCH 4/6] mtip32xx: convert internal command issue to block IO path

[Jens Axboe]

On 05/02/2017 08:47 AM, Jens Axboe wrote:
> On 05/02/2017 07:53 AM, Jens Axboe wrote:
>> On 05/02/2017 01:28 AM, Christoph Hellwig wrote:
>>> Looks fine for now:
>>>
>>> Reviewed-by: Christoph Hellwig <hch@lst.de>
>>>
>>> But rather sooner than later we need to make this path at least go
>>> through the normal end_request processing.  Without that we're just
>>> bound to run into problems like we had with the tag changes again
>>> when the driver is using the block layer APIs incompletely.
>>
>> I completely agree, I'll see if I can find some time to do that
>> soon.
> 
> Seems like a fine thing to do over morning coffee. How about something
> like the below? It's on top of the previous series. Basically this kills
> the private completion handler and data, which were basically redundant
> as they did nothing but spew a warning in case of an error.
> 
> It'd be nice to unify the INTERNAL and regular commands, but we don't
> have to do that to use the block layer APIs. If someone else wants to do
> that, be my guest.
> 
> It compiles and loads fine on my setup, did some basic testing it that
> went fine. Would be nice if someone else could look it over as well, to
> verify that I didn't drop any of the 0-vs-error setting. I think it's
> fine, we just need to ensure that cmd->status is always set to the
> appropriate error, then we propagate that through the mtip32xx softirq
> handler to the block layer.

Looks like I was missing one error conversion, on the internal request
path for taskfile TFE. Changed mtip_complete_command() to take a status
argument, and fixup that case too.

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 96fe6500e941..63a64123b3cb 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -205,66 +205,12 @@ static struct mtip_cmd *mtip_get_int_command(struct driver_data *dd)
 	return blk_mq_rq_to_pdu(rq);
 }
 
-static void mtip_put_int_command(struct driver_data *dd, struct mtip_cmd *cmd)
-{
-	blk_put_request(blk_mq_rq_from_pdu(cmd));
-}
-
-/*
- * Once we add support for one hctx per mtip group, this will change a bit
- */
-static struct request *mtip_rq_from_tag(struct driver_data *dd,
-					unsigned int tag)
-{
-	struct blk_mq_hw_ctx *hctx = dd->queue->queue_hw_ctx[0];
-
-	return blk_mq_tag_to_rq(hctx->tags, tag);
-}
-
 static struct mtip_cmd *mtip_cmd_from_tag(struct driver_data *dd,
 					  unsigned int tag)
 {
-	struct request *rq = mtip_rq_from_tag(dd, tag);
-
-	return blk_mq_rq_to_pdu(rq);
-}
-
-/*
- * IO completion function.
- *
- * This completion function is called by the driver ISR when a
- * command that was issued by the kernel completes. It first calls the
- * asynchronous completion function which normally calls back into the block
- * layer passing the asynchronous callback data, then unmaps the
- * scatter list associated with the completed command, and finally
- * clears the allocated bit associated with the completed command.
- *
- * @port   Pointer to the port data structure.
- * @tag    Tag of the command.
- * @data   Pointer to driver_data.
- * @status Completion status.
- *
- * return value
- *	None
- */
-static void mtip_async_complete(struct mtip_port *port,
-				int tag, struct mtip_cmd *cmd, int status)
-{
-	struct driver_data *dd = port->dd;
-	struct request *rq;
-
-	if (unlikely(!dd) || unlikely(!port))
-		return;
-
-	if (unlikely(status == PORT_IRQ_TF_ERR)) {
-		dev_warn(&port->dd->pdev->dev,
-			"Command tag %d failed due to TFE\n", tag);
-	}
-
-	rq = mtip_rq_from_tag(dd, tag);
+	struct blk_mq_hw_ctx *hctx = dd->queue->queue_hw_ctx[0];
 
-	cmd->status = status;
-	blk_mq_complete_request(rq);
+	return blk_mq_rq_to_pdu(blk_mq_tag_to_rq(hctx->tags, tag));
 }
 
 /*
@@ -581,38 +527,19 @@ static void print_tags(struct driver_data *dd,
 			"%d command(s) %s: tagmap [%s]", cnt, msg, tagmap);
 }
 
-/*
- * Internal command completion callback function.
- *
- * This function is normally called by the driver ISR when an internal
- * command completed. This function signals the command completion by
- * calling complete().
- *
- * @port   Pointer to the port data structure.
- * @tag    Tag of the command that has completed.
- * @data   Pointer to a completion structure.
- * @status Completion status.
- *
- * return value
- *	None
- */
-static void mtip_completion(struct mtip_port *port,
-			    int tag, struct mtip_cmd *command, int status)
-{
-	struct completion *waiting = command->comp_data;
-	if (unlikely(status == PORT_IRQ_TF_ERR))
-		dev_warn(&port->dd->pdev->dev,
-			"Internal command %d completed with TFE\n", tag);
-
-	command->comp_func = NULL;
-	command->comp_data = NULL;
-	complete(waiting);
-}
-
 static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer,
 				dma_addr_t buffer_dma, unsigned int sectors);
 static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
 						struct smart_attr *attrib);
+
+static void mtip_complete_command(struct mtip_cmd *cmd, int status)
+{
+	struct request *req = blk_mq_rq_from_pdu(cmd);
+
+	cmd->status = status;
+	blk_mq_complete_request(req);
+}
+
 /*
  * Handle an error.
  *
@@ -641,11 +568,7 @@ static void mtip_handle_tfe(struct driver_data *dd)
 	if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
 		cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL);
 		dbg_printk(MTIP_DRV_NAME " TFE for the internal command\n");
-
-		if (cmd->comp_data && cmd->comp_func) {
-			cmd->comp_func(port, MTIP_TAG_INTERNAL,
-					cmd, PORT_IRQ_TF_ERR);
-		}
+		mtip_complete_command(cmd, -EIO);
 		return;
 	}
 
@@ -672,19 +595,9 @@ static void mtip_handle_tfe(struct driver_data *dd)
 				continue;
 
 			cmd = mtip_cmd_from_tag(dd, tag);
-			if (likely(cmd->comp_func)) {
-				set_bit(tag, tagaccum);
-				cmd_cnt++;
-				cmd->comp_func(port, tag, cmd, 0);
-			} else {
-				dev_err(&port->dd->pdev->dev,
-					"Missing completion func for tag %d",
-					tag);
-				if (mtip_check_surprise_removal(dd->pdev)) {
-					/* don't proceed further */
-					return;
-				}
-			}
+			mtip_complete_command(cmd, 0);
+			set_bit(tag, tagaccum);
+			cmd_cnt++;
 		}
 	}
 
@@ -754,10 +667,7 @@ static void mtip_handle_tfe(struct driver_data *dd)
 					tag,
 					fail_reason != NULL ?
 						fail_reason : "unknown");
-					if (cmd->comp_func) {
-						cmd->comp_func(port, tag,
-							cmd, -ENODATA);
-					}
+					mtip_complete_command(cmd, -ENODATA);
 					continue;
 				}
 			}
@@ -780,12 +690,7 @@ static void mtip_handle_tfe(struct driver_data *dd)
 			dev_warn(&port->dd->pdev->dev,
 				"retiring tag %d\n", tag);
 
-			if (cmd->comp_func)
-				cmd->comp_func(port, tag, cmd, PORT_IRQ_TF_ERR);
-			else
-				dev_warn(&port->dd->pdev->dev,
-					"Bad completion for tag %d\n",
-					tag);
+			mtip_complete_command(cmd, -EIO);
 		}
 	}
 	print_tags(dd, "reissued (TFE)", tagaccum, cmd_cnt);
@@ -818,18 +723,7 @@ static inline void mtip_workq_sdbfx(struct mtip_port *port, int group,
 				continue;
 
 			command = mtip_cmd_from_tag(dd, tag);
-			if (likely(command->comp_func))
-				command->comp_func(port, tag, command, 0);
-			else {
-				dev_dbg(&dd->pdev->dev,
-					"Null completion for tag %d",
-					tag);
-
-				if (mtip_check_surprise_removal(
-					dd->pdev)) {
-					return;
-				}
-			}
+			mtip_complete_command(command, 0);
 		}
 		completed >>= 1;
 	}
@@ -850,13 +744,8 @@ static inline void mtip_process_legacy(struct driver_data *dd, u32 port_stat)
 	if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) &&
 	    (cmd != NULL) && !(readl(port->cmd_issue[MTIP_TAG_INTERNAL])
 		& (1 << MTIP_TAG_INTERNAL))) {
-		if (cmd->comp_func) {
-			cmd->comp_func(port, MTIP_TAG_INTERNAL, cmd, 0);
-			return;
-		}
+		mtip_complete_command(cmd, 0);
 	}
-
-	return;
 }
 
 /*
@@ -864,7 +753,6 @@ static inline void mtip_process_legacy(struct driver_data *dd, u32 port_stat)
  */
 static inline void mtip_process_errors(struct driver_data *dd, u32 port_stat)
 {
-
 	if (unlikely(port_stat & PORT_IRQ_CONNECT)) {
 		dev_warn(&dd->pdev->dev,
 			"Clearing PxSERR.DIAG.x\n");
@@ -991,8 +879,7 @@ static irqreturn_t mtip_irq_handler(int irq, void *instance)
 
 static void mtip_issue_non_ncq_command(struct mtip_port *port, int tag)
 {
-	writel(1 << MTIP_TAG_BIT(tag),
-		port->cmd_issue[MTIP_TAG_INDEX(tag)]);
+	writel(1 << MTIP_TAG_BIT(tag), port->cmd_issue[MTIP_TAG_INDEX(tag)]);
 }
 
 static bool mtip_pause_ncq(struct mtip_port *port,
@@ -1121,7 +1008,6 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 					u32 opts,
 					unsigned long timeout)
 {
-	DECLARE_COMPLETION_ONSTACK(wait);
 	struct mtip_cmd *int_cmd;
 	struct driver_data *dd = port->dd;
 	struct request *rq;
@@ -1146,7 +1032,7 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 		return -EFAULT;
 	}
 	rq = blk_mq_rq_from_pdu(int_cmd);
-	rq->end_io_data = &icmd;
+	rq->special = &icmd;
 
 	set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
 
@@ -1159,17 +1045,13 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 		/* wait for io to complete if non atomic */
 		if (mtip_quiesce_io(port, MTIP_QUIESCE_IO_TIMEOUT_MS) < 0) {
 			dev_warn(&dd->pdev->dev, "Failed to quiesce IO\n");
-			mtip_put_int_command(dd, int_cmd);
+			blk_mq_free_request(rq);
 			clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
 			wake_up_interruptible(&port->svc_wait);
 			return -EBUSY;
 		}
 	}
 
-	/* Set the completion function and data for the command. */
-	int_cmd->comp_data = &wait;
-	int_cmd->comp_func = mtip_completion;
-
 	/* Copy the command to the command table */
 	memcpy(int_cmd->command, fis, fis_len*4);
 
@@ -1177,11 +1059,9 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 	rq->timeout = timeout;
 
 	/* insert request and run queue */
-	blk_execute_rq_nowait(rq->q, NULL, rq, true, NULL);
+	blk_execute_rq(rq->q, NULL, rq, true);
 
-	wait_for_completion(&wait);
 	rv = int_cmd->status;
-
 	if (rv < 0) {
 		if (rv == -ERESTARTSYS) { /* interrupted */
 			dev_err(&dd->pdev->dev,
@@ -1223,7 +1103,7 @@ static int mtip_exec_internal_command(struct mtip_port *port,
 	}
 exec_ic_exit:
 	/* Clear the allocated and active bits for the internal command. */
-	mtip_put_int_command(dd, int_cmd);
+	blk_mq_free_request(rq);
 	clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
 	if (rv >= 0 && mtip_pause_ncq(port, fis)) {
 		/* NCQ paused */
@@ -2378,12 +2258,6 @@ static void mtip_hw_submit_io(struct driver_data *dd, struct request *rq,
 				(nents << 16) | 5 | AHCI_CMD_PREFETCH);
 	command->command_header->byte_count = 0;
 
-	/*
-	 * Set the completion function and data for the command
-	 * within this layer.
-	 */
-	command->comp_data = dd;
-	command->comp_func = mtip_async_complete;
 	command->direction = dma_dir;
 
 	/*
@@ -3761,15 +3635,13 @@ static int mtip_issue_reserved_cmd(struct blk_mq_hw_ctx *hctx,
 				   struct request *rq)
 {
 	struct driver_data *dd = hctx->queue->queuedata;
-	struct mtip_int_cmd *icmd = rq->end_io_data;
+	struct mtip_int_cmd *icmd = rq->special;
 	struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
 	struct mtip_cmd_sg *command_sg;
 
 	if (mtip_commands_active(dd->port))
 		return BLK_MQ_RQ_QUEUE_BUSY;
 
-	rq->end_io_data = NULL;
-
 	/* Populate the SG list */
 	cmd->command_header->opts =
 		 __force_bit2int cpu_to_le32(icmd->opts | icmd->fis_len);
@@ -3857,9 +3729,7 @@ static enum blk_eh_timer_return mtip_cmd_timeout(struct request *req,
 		struct mtip_cmd *cmd = blk_mq_rq_to_pdu(req);
 
 		cmd->status = -ETIME;
-		if (cmd->comp_func)
-			cmd->comp_func(dd->port, MTIP_TAG_INTERNAL, cmd, -ETIME);
-		goto exit_handler;
+		return BLK_EH_HANDLED;
 	}
 
 	if (test_bit(req->tag, dd->port->cmds_to_issue))
@@ -4087,21 +3957,10 @@ static int mtip_block_initialize(struct driver_data *dd)
 
 static void mtip_no_dev_cleanup(struct request *rq, void *data, bool reserv)
 {
-	struct driver_data *dd = (struct driver_data *)data;
-	struct mtip_cmd *cmd;
-
-	if (likely(!reserv)) {
-		cmd = blk_mq_rq_to_pdu(rq);
-		cmd->status = -ENODEV;
-		blk_mq_complete_request(rq);
-	} else if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &dd->port->flags)) {
+	struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
 
-		cmd = mtip_cmd_from_tag(dd, MTIP_TAG_INTERNAL);
-		cmd->status = -ENODEV;
-		if (cmd->comp_func)
-			cmd->comp_func(dd->port, MTIP_TAG_INTERNAL,
-					cmd, -ENODEV);
-	}
+	cmd->status = -ENODEV;
+	blk_mq_complete_request(rq);
 }
 
 /*
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index 57b41528a824..37b8e3e0bb78 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -333,16 +333,6 @@ struct mtip_cmd {
 
 	dma_addr_t command_dma; /* corresponding physical address */
 
-	void *comp_data; /* data passed to completion function comp_func() */
-	/*
-	 * Completion function called by the ISR upon completion of
-	 * a command.
-	 */
-	void (*comp_func)(struct mtip_port *port,
-				int tag,
-				struct mtip_cmd *cmd,
-				int status);
-
 	int scatter_ents; /* Number of scatter list entries used */
 
 	int unaligned; /* command is unaligned on 4k boundary */

-- 
Jens Axboe

Re: [PATCH 4/6] mtip32xx: convert internal command issue to block IO path

[Christoph Hellwig]

This looks reasonable to me, although of course I don't have a way
to test it.

Any reason for the move from ->end_io_data to ->special?  I thought
that ->special was something we'd get rid of sooner or later now
that we can have additional per-cmd data even for !mq.

Re: [PATCH 4/6] mtip32xx: convert internal command issue to block IO path

[Jens Axboe]

On 05/02/2017 09:16 AM, Christoph Hellwig wrote:
> This looks reasonable to me, although of course I don't have a way
> to test it.

I've got a few cards at least.

> Any reason for the move from ->end_io_data to ->special?  I thought
> that ->special was something we'd get rid of sooner or later now
> that we can have additional per-cmd data even for !mq.

With the switch to blk_execute_rq(), we can't be using end_io_data
and end_io, as we use that internally for the wakeup. So I have to
stuff it somewhere.

The obvious option would be to move it to mtip_cmd, but we can't
safely access that prior to having a driver tag assigned, which doesn't
happen until we end up in our ->queue_rq(). So we need to stuff it
somewhere.

-- 
Jens Axboe

Re: [PATCH 4/6] mtip32xx: convert internal command issue to block IO path

[Bart Van Assche]

On Tue, 2017-05-02 at 09:25 -0600, Jens Axboe wrote:
> On 05/02/2017 09:16 AM, Christoph Hellwig wrote:
> > Any reason for the move from ->end_io_data to ->special?  I thought
> > that ->special was something we'd get rid of sooner or later now
> > that we can have additional per-cmd data even for !mq.
>=20
> With the switch to blk_execute_rq(), we can't be using end_io_data
> and end_io, as we use that internally for the wakeup. So I have to
> stuff it somewhere.
>=20
> The obvious option would be to move it to mtip_cmd, but we can't
> safely access that prior to having a driver tag assigned, which doesn't
> happen until we end up in our ->queue_rq(). So we need to stuff it
> somewhere.

Hello Jens,

Do you think it would be a good idea to allow blk_get_request() callers
to specify that a driver tag has to be allocated even if a scheduler has
been configured? That would make it possible to store completion data in
mtip_cmd for the mtip driver.

Thanks,

Bart.=

Re: [PATCH 4/6] mtip32xx: convert internal command issue to block IO path

[Jens Axboe]

On 05/02/2017 09:42 AM, Bart Van Assche wrote:
> On Tue, 2017-05-02 at 09:25 -0600, Jens Axboe wrote:
>> On 05/02/2017 09:16 AM, Christoph Hellwig wrote:
>>> Any reason for the move from ->end_io_data to ->special?  I thought
>>> that ->special was something we'd get rid of sooner or later now
>>> that we can have additional per-cmd data even for !mq.
>>
>> With the switch to blk_execute_rq(), we can't be using end_io_data
>> and end_io, as we use that internally for the wakeup. So I have to
>> stuff it somewhere.
>>
>> The obvious option would be to move it to mtip_cmd, but we can't
>> safely access that prior to having a driver tag assigned, which doesn't
>> happen until we end up in our ->queue_rq(). So we need to stuff it
>> somewhere.
> 
> Hello Jens,
> 
> Do you think it would be a good idea to allow blk_get_request() callers
> to specify that a driver tag has to be allocated even if a scheduler has
> been configured? That would make it possible to store completion data in
> mtip_cmd for the mtip driver.

Honestly, I think it's fine that we can stuff it _somewhere_ in the
request. I'd rather not expose the driver vs internal tag anymore
than we absolutely have, it's just prone to work on one configuration
and then break if someone turns scheduling on or off.

The real fix here, to avoid using ->special, would be to map the
request before insertion. Then we don't have to pass any info at all.
But that will require touching the callers of the internal command
path for mtip32xx. Left as an exercise to the reader...

-- 
Jens Axboe

[PATCH 5/6] blk-mq-sched: remove hack that bypasses scheduler for reserved requests

[Jens Axboe]

We have update the troublesome driver (mtip32xx) to deal with this
appropriately. So kill the hack that bypassed scheduler allocation
and insertion for reserved requests.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
---
 block/blk-mq-sched.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c
index 8b361e192e8a..e79e9f18d7c2 100644
--- a/block/blk-mq-sched.c
+++ b/block/blk-mq-sched.c
@@ -82,11 +82,7 @@ struct request *blk_mq_sched_get_request(struct request_queue *q,
 	if (likely(!data->hctx))
 		data->hctx = blk_mq_map_queue(q, data->ctx->cpu);
 
-	/*
-	 * For a reserved tag, allocate a normal request since we might
-	 * have driver dependencies on the value of the internal tag.
-	 */
-	if (e && !(data->flags & BLK_MQ_REQ_RESERVED)) {
+	if (e) {
 		data->flags |= BLK_MQ_REQ_INTERNAL;
 
 		/*
-- 
2.7.4

Re: [PATCH 5/6] blk-mq-sched: remove hack that bypasses scheduler for reserved requests

[Christoph Hellwig]

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

[PATCH 6/6] Revert "mtip32xx: pass BLK_MQ_F_NO_SCHED"

[Jens Axboe]

This reverts commit 4981d04dd8f1ab19e2cce008da556d7f099b6e68.

The driver has been converted to using the proper infrastructure
for issuing internal commands. This means it's now safe to use with
the scheduling infrastruture, so we can now revert the change
that turned off scheduling for mtip32xx.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
---
 drivers/block/mtip32xx/mtip32xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 9749b099a914..9108be601a64 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -3961,7 +3961,7 @@ static int mtip_block_initialize(struct driver_data *dd)
 	dd->tags.reserved_tags = 1;
 	dd->tags.cmd_size = sizeof(struct mtip_cmd);
 	dd->tags.numa_node = dd->numa_node;
-	dd->tags.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_NO_SCHED;
+	dd->tags.flags = BLK_MQ_F_SHOULD_MERGE;
 	dd->tags.driver_data = dd;
 	dd->tags.timeout = MTIP_NCQ_CMD_TIMEOUT_MS;
 
-- 
2.7.4

Re: [PATCH 6/6] Revert "mtip32xx: pass BLK_MQ_F_NO_SCHED"

[Christoph Hellwig]

Looks good,

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH v4 0/6] Fixup mtip32xx for scheduling

[Ming Lei]

On Fri, Apr 28, 2017 at 10:54:27AM -0600, Jens Axboe wrote:
> OK, I think we're getting there now. I dropped the RQF_RESERVED
> and the tag helper, since mtip32xx can just call
> blk_rq_is_passthrough() and know it's an internal request.
> 
> We can do another cleanup series of mtip32xx making the
> internal requests use the normal blk end_io infrastructure,
> and use the provider helpers for mapping data. I think
> that should be done separately as a cleanup, keeping this series
> as a straight forward conversion.
> 
> I've tested this on the following card:
> 
> [   56.394162] mtip32xx 0000:81:00.0: Model: P320h-MTFDGAR350SAH
> 
> and it works fine for me.

Tested this patchset against the latest linus tree, works fine
on my system with mq-deadline scheduler enabled.

	Tested-by: Ming Lei <ming.lei@redhat.com>

Thanks,
Ming