From: "Rainer Fügenstein" <rfu@oudeis.org>
To: linux-raid@vger.kernel.org
Subject: 3TB drives failure rate (summary)
Date: Wed, 31 Oct 2012 00:54:57 +0100 [thread overview]
Message-ID: <1494377384.20121031005457@oudeis.org> (raw)
In-Reply-To: <508E7E68.1030202@turmel.org>
tnx for your input; apart from the detailed discussion the topic may
be summarised like this:
- better buy WD red drives next time (will do!)
- other manufacturers drives fail too, not only a WD issue
- drives from one (bad) batch are more likely to fail
current status:
the raid5 assembled of just 3 WD 3TB green drives works fine so far,
even under load. no bad sectors so far (knocking on wood). will extend
it to 4 drives as soon as the replacement drive arrives.
the drives are installed in the same chassis and bays as all the
previous drives, therefore it is unlikely that the failures were
caused by overheating/vibrations etc.
never had any (serious) problems with 750GB and 1.5TB WD green drives
before.
tnx & cu
next prev parent reply other threads:[~2012-10-30 23:54 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-28 12:15 3TB drives failure rate Rainer Fügenstein
2012-10-28 12:19 ` Mathias Burén
2012-10-28 12:49 ` John Robinson
2012-10-28 12:54 ` Michael Tokarev
2012-10-28 16:47 ` Ed W
2012-10-28 17:05 ` Joe Landman
2012-10-28 22:12 ` joystick
2012-10-28 22:24 ` Miles Fidelman
2012-10-28 23:59 ` joystick
2012-10-29 0:09 ` Miles Fidelman
2012-10-29 4:29 ` Roman Mamedov
2012-10-29 7:54 ` David Brown
2012-10-29 13:02 ` Phil Turmel
2012-10-30 23:54 ` Rainer Fügenstein [this message]
2012-10-31 12:35 ` 3TB drives failure rate (summary) Phil Turmel
2012-11-01 15:13 ` Miles Fidelman
2012-11-01 15:24 ` John Robinson
2012-11-01 15:39 ` Miles Fidelman
2012-11-01 16:05 ` John Robinson
2012-11-01 16:25 ` Miles Fidelman
2013-02-05 17:43 ` Adam Goryachev
2013-02-05 18:08 ` Roy Sigurd Karlsbakk
2013-02-05 20:34 ` Wolfgang Denk
2012-10-29 13:26 ` 3TB drives failure rate Miles Fidelman
2012-10-28 19:50 ` Chris Murphy
2012-10-28 19:59 ` Roman Mamedov
2012-10-28 20:10 ` Chris Murphy
2012-10-28 20:16 ` Roman Mamedov
2012-10-28 20:34 ` Chris Murphy
2012-10-28 20:49 ` Roman Mamedov
2012-10-28 20:59 ` Chris Murphy
2012-10-28 21:07 ` Miles Fidelman
2012-10-28 20:50 ` Chris Murphy
2012-10-28 21:07 ` Chris Murphy
2012-10-28 21:18 ` Roman Mamedov
2012-10-28 21:24 ` Mikael Abrahamsson
2012-10-28 21:45 ` Miles Fidelman
2012-10-28 22:35 ` Chris Murphy
2012-10-28 21:51 ` Chris Murphy
2012-10-28 21:59 ` joystick
2012-10-28 22:10 ` Phil Turmel
2012-10-29 0:12 ` joystick
2012-10-29 0:21 ` Phil Turmel
2012-10-29 0:27 ` Chris Murphy
2012-10-28 21:21 ` Mikael Abrahamsson
2012-10-28 23:51 ` Peter Kieser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494377384.20121031005457@oudeis.org \
--to=rfu@oudeis.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.