From: embed3d@gmail.com (Philipp Rossak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/2] [DTS] Enable hardware for Nanopi M1 & Nanopi M1 Plus
Date: Fri, 1 Sep 2017 18:29:59 +0200 [thread overview]
Message-ID: <1504283401-4263-1-git-send-email-embed3d@gmail.com> (raw)
From: Philipp Rossak <embed3d@gmail.com>
This is v2 of my Enable hardware for Nanopi M1 & Nanopi M1 Plus Patchseries.
Changes since v1:
- removed pincrtl node from power sequence
- removed vqmmc-supply
- changed ap6212 label to sdio_wifi
- removed vqmmc-supply & pincrtl node for powersequence on Bananapi M2 Plus
- Droped patches for the IR controller & UART that are allready queued for 4.15
- Droped dwmac-sun8i patches
Original cover letter from v1:
This Patchseries enables the IR controller and the dwmac-sun8i
on the Friendlyarm Nanopi M1 and Friendlyarm Nanopi M1 Plus boards.
On the Nanopi M1 Plus additionally the BT/Wifi module is activated.
Philipp Rossak (2):
ARM: dts: sun8i: h3: Enable AP6212 WiFi on mmc1 on Nanopi M1 Plus
ARM: dts: sun8i: h3: Improved Wifi bindings on Bananapi M2 Plus
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 7 -------
arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25 +++++++++++++++++++++++++
2 files changed, 25 insertions(+), 7 deletions(-)
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d@gmail.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk,
maxime.ripard@free-electrons.com, wens@csie.org
Cc: Philipp Rossak <embed3d@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v2 0/2] [DTS] Enable hardware for Nanopi M1 & Nanopi M1 Plus
Date: Fri, 1 Sep 2017 18:29:59 +0200 [thread overview]
Message-ID: <1504283401-4263-1-git-send-email-embed3d@gmail.com> (raw)
From: Philipp Rossak <embed3d@gmail.com>
This is v2 of my Enable hardware for Nanopi M1 & Nanopi M1 Plus Patchseries.
Changes since v1:
- removed pincrtl node from power sequence
- removed vqmmc-supply
- changed ap6212 label to sdio_wifi
- removed vqmmc-supply & pincrtl node for powersequence on Bananapi M2 Plus
- Droped patches for the IR controller & UART that are allready queued for 4.15
- Droped dwmac-sun8i patches
Original cover letter from v1:
This Patchseries enables the IR controller and the dwmac-sun8i
on the Friendlyarm Nanopi M1 and Friendlyarm Nanopi M1 Plus boards.
On the Nanopi M1 Plus additionally the BT/Wifi module is activated.
Philipp Rossak (2):
ARM: dts: sun8i: h3: Enable AP6212 WiFi on mmc1 on Nanopi M1 Plus
ARM: dts: sun8i: h3: Improved Wifi bindings on Bananapi M2 Plus
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 7 -------
arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25 +++++++++++++++++++++++++
2 files changed, 25 insertions(+), 7 deletions(-)
--
2.7.4
next reply other threads:[~2017-09-01 16:29 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-01 16:29 Philipp Rossak [this message]
2017-09-01 16:29 ` [PATCH v2 0/2] [DTS] Enable hardware for Nanopi M1 & Nanopi M1 Plus Philipp Rossak
2017-09-01 16:30 ` [PATCH v2 1/2] ARM: dts: sun8i: h3: Enable AP6212 WiFi on mmc1 on " Philipp Rossak
2017-09-01 16:30 ` Philipp Rossak
2017-09-01 16:30 ` Philipp Rossak
2017-09-02 7:01 ` icenowy at aosc.io
2017-09-02 7:01 ` icenowy
2017-09-02 7:01 ` icenowy-h8G6r0blFSE
2017-09-04 8:04 ` Maxime Ripard
2017-09-04 8:04 ` Maxime Ripard
2017-09-04 8:04 ` Maxime Ripard
2017-09-04 8:02 ` Maxime Ripard
2017-09-04 8:02 ` Maxime Ripard
2017-09-04 8:02 ` Maxime Ripard
2017-09-01 16:30 ` [PATCH v2 2/2] ARM: dts: sun8i: h3: Improved Wifi bindings on Bananapi M2 Plus Philipp Rossak
2017-09-01 16:30 ` Philipp Rossak
2017-09-01 16:30 ` Philipp Rossak
2017-09-04 8:05 ` Maxime Ripard
2017-09-04 8:05 ` Maxime Ripard
2017-09-04 8:05 ` Maxime Ripard
2017-09-04 13:52 ` Philipp Rossak
2017-09-04 13:52 ` Philipp Rossak
2017-09-04 13:52 ` Philipp Rossak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1504283401-4263-1-git-send-email-embed3d@gmail.com \
--to=embed3d@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.