From: Timur Tabi <timur@codeaurora.org>
To: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
Linus Walleij <linus.walleij@linaro.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
thierry.reding@gmail.com, Stephen Boyd <sboyd@codeaurora.org>,
david.brown@linaro.org, andy.gross@linaro.org,
Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: timur@codeaurora.org
Subject: [PATCH 2/4] gpiolib: add bitmask for valid GPIO lines
Date: Mon, 30 Oct 2017 15:50:00 -0500 [thread overview]
Message-ID: <1509396602-1936-3-git-send-email-timur@codeaurora.org> (raw)
In-Reply-To: <1509396602-1936-1-git-send-email-timur@codeaurora.org>
Add support for specifying that some GPIOs within a range are unavailable.
Some systems have a sparse list of GPIOs, where a range of GPIOs is
specified (usually 0 to n-1), but some subset within that range is
absent or unavailable for whatever reason.
To support this, allow drivers to specify a bitmask of GPIOs that
are present or absent. Gpiolib will then block access to those that
are absent.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
---
drivers/gpio/gpiolib.c | 43 +++++++++++++++++++++++++++++++++++--------
include/linux/gpio/driver.h | 2 ++
2 files changed, 37 insertions(+), 8 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 60553af4c004..c32387936cdd 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1481,22 +1481,36 @@ static struct gpio_chip *find_chip_by_name(const char *name)
static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip)
{
- if (!gpiochip->irq_need_valid_mask)
- return 0;
+ if (gpiochip->irq_need_valid_mask) {
+ gpiochip->irq_valid_mask =
+ kcalloc(BITS_TO_LONGS(gpiochip->ngpio),
+ sizeof(long), GFP_KERNEL);
+ if (!gpiochip->irq_valid_mask)
+ return -ENOMEM;
- gpiochip->irq_valid_mask = kcalloc(BITS_TO_LONGS(gpiochip->ngpio),
- sizeof(long), GFP_KERNEL);
- if (!gpiochip->irq_valid_mask)
- return -ENOMEM;
+ /* Assume by default all GPIOs are valid */
+ bitmap_fill(gpiochip->irq_valid_mask, gpiochip->ngpio);
+ }
- /* Assume by default all GPIOs are valid */
- bitmap_fill(gpiochip->irq_valid_mask, gpiochip->ngpio);
+ if (gpiochip->line_need_valid_mask) {
+ gpiochip->line_valid_mask =
+ kcalloc(BITS_TO_LONGS(gpiochip->ngpio),
+ sizeof(long), GFP_KERNEL);
+ if (!gpiochip->line_valid_mask)
+ return -ENOMEM;
+
+ /* Assume by default all GPIOs are valid */
+ bitmap_fill(gpiochip->line_valid_mask, gpiochip->ngpio);
+ }
return 0;
}
static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
{
+ kfree(gpiochip->line_valid_mask);
+ gpiochip->line_valid_mask = NULL;
+
kfree(gpiochip->irq_valid_mask);
gpiochip->irq_valid_mask = NULL;
}
@@ -1510,6 +1524,15 @@ static bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
return test_bit(offset, gpiochip->irq_valid_mask);
}
+static bool gpiochip_irqchip_line_valid(const struct gpio_chip *gpiochip,
+ unsigned int offset)
+{
+ /* No mask means all valid */
+ if (likely(!gpiochip->line_valid_mask))
+ return true;
+ return test_bit(offset, gpiochip->line_valid_mask);
+}
+
/**
* gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip
* @gpiochip: the gpiochip to set the irqchip chain to
@@ -3320,6 +3343,10 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
return desc;
}
+ /* Make sure the GPIO is valid before we request it. */
+ if (!gpiochip_irqchip_line_valid(desc->gdev->chip, idx))
+ return ERR_PTR(-EACCES);
+
status = gpiod_request(desc, con_id);
if (status < 0)
return ERR_PTR(status);
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index c97f8325e8bf..83df2934bdf7 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -172,6 +172,8 @@ struct gpio_chip {
bool irq_nested;
bool irq_need_valid_mask;
unsigned long *irq_valid_mask;
+ bool line_need_valid_mask;
+ unsigned long *line_valid_mask;
struct lock_class_key *lock_key;
#endif
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
WARNING: multiple messages have this Message-ID (diff)
From: timur@codeaurora.org (Timur Tabi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] gpiolib: add bitmask for valid GPIO lines
Date: Mon, 30 Oct 2017 15:50:00 -0500 [thread overview]
Message-ID: <1509396602-1936-3-git-send-email-timur@codeaurora.org> (raw)
In-Reply-To: <1509396602-1936-1-git-send-email-timur@codeaurora.org>
Add support for specifying that some GPIOs within a range are unavailable.
Some systems have a sparse list of GPIOs, where a range of GPIOs is
specified (usually 0 to n-1), but some subset within that range is
absent or unavailable for whatever reason.
To support this, allow drivers to specify a bitmask of GPIOs that
are present or absent. Gpiolib will then block access to those that
are absent.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
---
drivers/gpio/gpiolib.c | 43 +++++++++++++++++++++++++++++++++++--------
include/linux/gpio/driver.h | 2 ++
2 files changed, 37 insertions(+), 8 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 60553af4c004..c32387936cdd 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1481,22 +1481,36 @@ static struct gpio_chip *find_chip_by_name(const char *name)
static int gpiochip_irqchip_init_valid_mask(struct gpio_chip *gpiochip)
{
- if (!gpiochip->irq_need_valid_mask)
- return 0;
+ if (gpiochip->irq_need_valid_mask) {
+ gpiochip->irq_valid_mask =
+ kcalloc(BITS_TO_LONGS(gpiochip->ngpio),
+ sizeof(long), GFP_KERNEL);
+ if (!gpiochip->irq_valid_mask)
+ return -ENOMEM;
- gpiochip->irq_valid_mask = kcalloc(BITS_TO_LONGS(gpiochip->ngpio),
- sizeof(long), GFP_KERNEL);
- if (!gpiochip->irq_valid_mask)
- return -ENOMEM;
+ /* Assume by default all GPIOs are valid */
+ bitmap_fill(gpiochip->irq_valid_mask, gpiochip->ngpio);
+ }
- /* Assume by default all GPIOs are valid */
- bitmap_fill(gpiochip->irq_valid_mask, gpiochip->ngpio);
+ if (gpiochip->line_need_valid_mask) {
+ gpiochip->line_valid_mask =
+ kcalloc(BITS_TO_LONGS(gpiochip->ngpio),
+ sizeof(long), GFP_KERNEL);
+ if (!gpiochip->line_valid_mask)
+ return -ENOMEM;
+
+ /* Assume by default all GPIOs are valid */
+ bitmap_fill(gpiochip->line_valid_mask, gpiochip->ngpio);
+ }
return 0;
}
static void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gpiochip)
{
+ kfree(gpiochip->line_valid_mask);
+ gpiochip->line_valid_mask = NULL;
+
kfree(gpiochip->irq_valid_mask);
gpiochip->irq_valid_mask = NULL;
}
@@ -1510,6 +1524,15 @@ static bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gpiochip,
return test_bit(offset, gpiochip->irq_valid_mask);
}
+static bool gpiochip_irqchip_line_valid(const struct gpio_chip *gpiochip,
+ unsigned int offset)
+{
+ /* No mask means all valid */
+ if (likely(!gpiochip->line_valid_mask))
+ return true;
+ return test_bit(offset, gpiochip->line_valid_mask);
+}
+
/**
* gpiochip_set_cascaded_irqchip() - connects a cascaded irqchip to a gpiochip
* @gpiochip: the gpiochip to set the irqchip chain to
@@ -3320,6 +3343,10 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
return desc;
}
+ /* Make sure the GPIO is valid before we request it. */
+ if (!gpiochip_irqchip_line_valid(desc->gdev->chip, idx))
+ return ERR_PTR(-EACCES);
+
status = gpiod_request(desc, con_id);
if (status < 0)
return ERR_PTR(status);
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index c97f8325e8bf..83df2934bdf7 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -172,6 +172,8 @@ struct gpio_chip {
bool irq_nested;
bool irq_need_valid_mask;
unsigned long *irq_valid_mask;
+ bool line_need_valid_mask;
+ unsigned long *line_valid_mask;
struct lock_class_key *lock_key;
#endif
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2017-10-30 20:50 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-30 20:49 [PATCH 0/4] [v6] pinctrl: qcom: add support for sparse GPIOs Timur Tabi
2017-10-30 20:49 ` Timur Tabi
2017-10-30 20:49 ` [PATCH 1/4] Revert "gpio: set up initial state from .get_direction()" Timur Tabi
2017-10-30 20:49 ` Timur Tabi
2017-10-31 9:08 ` Andy Shevchenko
2017-10-31 9:08 ` Andy Shevchenko
2017-10-31 12:28 ` Timur Tabi
2017-10-31 12:28 ` Timur Tabi
2017-10-31 12:33 ` Fabio Estevam
2017-10-31 12:33 ` Fabio Estevam
2017-10-31 12:36 ` Timur Tabi
2017-10-31 12:36 ` Timur Tabi
2017-10-31 12:34 ` Andy Shevchenko
2017-10-31 12:34 ` Andy Shevchenko
2017-10-30 20:50 ` Timur Tabi [this message]
2017-10-30 20:50 ` [PATCH 2/4] gpiolib: add bitmask for valid GPIO lines Timur Tabi
2017-10-31 9:12 ` Andy Shevchenko
2017-10-31 9:12 ` Andy Shevchenko
2017-10-31 18:54 ` Timur Tabi
2017-10-31 18:54 ` Timur Tabi
2017-10-31 19:05 ` Andy Shevchenko
2017-10-31 19:05 ` Andy Shevchenko
2017-10-30 20:50 ` [PATCH 3/4] [v6] pinctrl: qcom: disable GPIO groups with no pins Timur Tabi
2017-10-30 20:50 ` Timur Tabi
2017-10-30 20:50 ` [PATCH 4/4] [v3] pinctrl: qcom: qdf2xxx: add support for new ACPI HID QCOM8002 Timur Tabi
2017-10-30 20:50 ` Timur Tabi
-- strict thread matches above, loose matches on Subject: below --
2017-11-07 23:07 [PATCH 0/4] [v7] pinctrl: qcom: add support for sparse GPIOs Timur Tabi
2017-11-07 23:07 ` [PATCH 2/4] gpiolib: add bitmask for valid GPIO lines Timur Tabi
2017-11-07 23:07 ` Timur Tabi
2017-12-01 11:38 ` Archit Taneja
2017-12-01 11:38 ` Archit Taneja
2017-12-01 17:16 ` Timur Tabi
2017-12-01 17:16 ` Timur Tabi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1509396602-1936-3-git-send-email-timur@codeaurora.org \
--to=timur@codeaurora.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=sboyd@codeaurora.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.