From: Abhishek Sahu <absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Andy Gross <andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
David Brown <david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Abhishek Sahu <absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH v2 05/11] clk: qcom: ipq8074: add remaining PLL’s
Date: Wed, 13 Dec 2017 19:55:36 +0530 [thread overview]
Message-ID: <1513175142-3702-6-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1513175142-3702-1-git-send-email-absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
- GPLL2, GPLL4 and GPLL6 are general PLL clocks and parent
for all core peripherals.
- UBI PLL is mainly used by NSS (Network Switching System).
IPQ8074 has 2 instances of NSS UBI cores and UBI PLL will
be used to control the core frequency.
- NSS Crypto PLL is mainly used by NSS Crypto Engine which
supports the multiple cryptographic algorithm used in
Ethernet.
- IPQ8074 frequency plan does not require change in PLL post
dividers so marked the same as read-only.
Signed-off-by: Abhishek Sahu <absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
drivers/clk/qcom/gcc-ipq8074.c | 192 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 191 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index 99906f6..ad9c920 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -91,7 +91,186 @@ enum {
"gpll0_main"
},
.num_parents = 1,
- .ops = &clk_alpha_pll_postdiv_ops,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ },
+};
+
+static struct clk_alpha_pll gpll2_main = {
+ .offset = 0x4a000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(2),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll2_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll2 = {
+ .offset = 0x4a000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll2",
+ .parent_names = (const char *[]){
+ "gpll2_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll gpll4_main = {
+ .offset = 0x24000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(5),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll4_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll4 = {
+ .offset = 0x24000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll4",
+ .parent_names = (const char *[]){
+ "gpll4_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll gpll6_main = {
+ .offset = 0x37000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_BRAMMO],
+ .flags = SUPPORTS_DYNAMIC_UPDATE,
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(7),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll6_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll6 = {
+ .offset = 0x37000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_BRAMMO],
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll6",
+ .parent_names = (const char *[]){
+ "gpll6_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor gpll6_out_main_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll6_out_main_div2",
+ .parent_names = (const char *[]){
+ "gpll6_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll ubi32_pll_main = {
+ .offset = 0x25000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_HUAYRA],
+ .flags = SUPPORTS_DYNAMIC_UPDATE,
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(6),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_pll_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_huayra_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv ubi32_pll = {
+ .offset = 0x25000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_HUAYRA],
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "ubi32_pll",
+ .parent_names = (const char *[]){
+ "ubi32_pll_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll nss_crypto_pll_main = {
+ .offset = 0x22000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_crypto_pll_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv nss_crypto_pll = {
+ .offset = 0x22000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "nss_crypto_pll",
+ .parent_names = (const char *[]){
+ "nss_crypto_pll_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -808,12 +987,23 @@ enum {
static struct clk_hw *gcc_ipq8074_hws[] = {
&gpll0_out_main_div2.hw,
+ &gpll6_out_main_div2.hw,
&pcnoc_clk_src.hw,
};
static struct clk_regmap *gcc_ipq8074_clks[] = {
[GPLL0_MAIN] = &gpll0_main.clkr,
[GPLL0] = &gpll0.clkr,
+ [GPLL2_MAIN] = &gpll2_main.clkr,
+ [GPLL2] = &gpll2.clkr,
+ [GPLL4_MAIN] = &gpll4_main.clkr,
+ [GPLL4] = &gpll4.clkr,
+ [GPLL6_MAIN] = &gpll6_main.clkr,
+ [GPLL6] = &gpll6.clkr,
+ [UBI32_PLL_MAIN] = &ubi32_pll_main.clkr,
+ [UBI32_PLL] = &ubi32_pll.clkr,
+ [NSS_CRYPTO_PLL_MAIN] = &nss_crypto_pll_main.clkr,
+ [NSS_CRYPTO_PLL] = &nss_crypto_pll.clkr,
[PCNOC_BFDCD_CLK_SRC] = &pcnoc_bfdcd_clk_src.clkr,
[GCC_SLEEP_CLK_SRC] = &gcc_sleep_clk_src.clkr,
[BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Abhishek Sahu <absahu@codeaurora.org>
To: Stephen Boyd <sboyd@codeaurora.org>,
Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Abhishek Sahu <absahu@codeaurora.org>
Subject: [PATCH v2 05/11] clk: qcom: ipq8074: add remaining PLL’s
Date: Wed, 13 Dec 2017 19:55:36 +0530 [thread overview]
Message-ID: <1513175142-3702-6-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1513175142-3702-1-git-send-email-absahu@codeaurora.org>
- GPLL2, GPLL4 and GPLL6 are general PLL clocks and parent
for all core peripherals.
- UBI PLL is mainly used by NSS (Network Switching System).
IPQ8074 has 2 instances of NSS UBI cores and UBI PLL will
be used to control the core frequency.
- NSS Crypto PLL is mainly used by NSS Crypto Engine which
supports the multiple cryptographic algorithm used in
Ethernet.
- IPQ8074 frequency plan does not require change in PLL post
dividers so marked the same as read-only.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
drivers/clk/qcom/gcc-ipq8074.c | 192 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 191 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index 99906f6..ad9c920 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -91,7 +91,186 @@ enum {
"gpll0_main"
},
.num_parents = 1,
- .ops = &clk_alpha_pll_postdiv_ops,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ },
+};
+
+static struct clk_alpha_pll gpll2_main = {
+ .offset = 0x4a000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(2),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll2_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll2 = {
+ .offset = 0x4a000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll2",
+ .parent_names = (const char *[]){
+ "gpll2_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll gpll4_main = {
+ .offset = 0x24000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(5),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll4_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll4 = {
+ .offset = 0x24000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll4",
+ .parent_names = (const char *[]){
+ "gpll4_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll gpll6_main = {
+ .offset = 0x37000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_BRAMMO],
+ .flags = SUPPORTS_DYNAMIC_UPDATE,
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(7),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll6_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll6 = {
+ .offset = 0x37000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_BRAMMO],
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll6",
+ .parent_names = (const char *[]){
+ "gpll6_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_fixed_factor gpll6_out_main_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll6_out_main_div2",
+ .parent_names = (const char *[]){
+ "gpll6_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll ubi32_pll_main = {
+ .offset = 0x25000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_HUAYRA],
+ .flags = SUPPORTS_DYNAMIC_UPDATE,
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(6),
+ .hw.init = &(struct clk_init_data){
+ .name = "ubi32_pll_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_huayra_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv ubi32_pll = {
+ .offset = 0x25000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_HUAYRA],
+ .width = 2,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "ubi32_pll",
+ .parent_names = (const char *[]){
+ "ubi32_pll_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll nss_crypto_pll_main = {
+ .offset = 0x22000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(4),
+ .hw.init = &(struct clk_init_data){
+ .name = "nss_crypto_pll_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ },
+ },
+};
+
+static struct clk_alpha_pll_postdiv nss_crypto_pll = {
+ .offset = 0x22000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .width = 4,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "nss_crypto_pll",
+ .parent_names = (const char *[]){
+ "nss_crypto_pll_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ro_ops,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -808,12 +987,23 @@ enum {
static struct clk_hw *gcc_ipq8074_hws[] = {
&gpll0_out_main_div2.hw,
+ &gpll6_out_main_div2.hw,
&pcnoc_clk_src.hw,
};
static struct clk_regmap *gcc_ipq8074_clks[] = {
[GPLL0_MAIN] = &gpll0_main.clkr,
[GPLL0] = &gpll0.clkr,
+ [GPLL2_MAIN] = &gpll2_main.clkr,
+ [GPLL2] = &gpll2.clkr,
+ [GPLL4_MAIN] = &gpll4_main.clkr,
+ [GPLL4] = &gpll4.clkr,
+ [GPLL6_MAIN] = &gpll6_main.clkr,
+ [GPLL6] = &gpll6.clkr,
+ [UBI32_PLL_MAIN] = &ubi32_pll_main.clkr,
+ [UBI32_PLL] = &ubi32_pll.clkr,
+ [NSS_CRYPTO_PLL_MAIN] = &nss_crypto_pll_main.clkr,
+ [NSS_CRYPTO_PLL] = &nss_crypto_pll.clkr,
[PCNOC_BFDCD_CLK_SRC] = &pcnoc_bfdcd_clk_src.clkr,
[GCC_SLEEP_CLK_SRC] = &gcc_sleep_clk_src.clkr,
[BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2017-12-13 14:25 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-13 14:25 [PATCH v2 00/11] Add remaining clocks for QCOM IPQ8074 Abhishek Sahu
2017-12-13 14:25 ` [PATCH v2 02/11] clk: qcom: add parent map for regmap mux Abhishek Sahu
2017-12-22 0:23 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 03/11] clk: qcom: ipq8074: fix missing GPLL0 divider width Abhishek Sahu
2017-12-22 0:23 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 04/11] dt-bindings: clock: qcom: add remaining clocks for IPQ8074 Abhishek Sahu
2017-12-15 23:09 ` Rob Herring
2017-12-22 0:24 ` Stephen Boyd
[not found] ` <1513175142-3702-1-git-send-email-absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-13 14:25 ` [PATCH v2 01/11] clk: qcom: add read-only divider operations Abhishek Sahu
2017-12-13 14:25 ` Abhishek Sahu
2017-12-22 0:23 ` Stephen Boyd
2017-12-13 14:25 ` Abhishek Sahu [this message]
2017-12-13 14:25 ` [PATCH v2 05/11] clk: qcom: ipq8074: add remaining PLL’s Abhishek Sahu
2017-12-22 0:23 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 06/11] clk: qcom: ipq8074: add PCIE, USB and SDCC clocks Abhishek Sahu
2017-12-13 14:25 ` Abhishek Sahu
2017-12-22 0:24 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 07/11] clk: qcom: ipq8074: add NSS clocks Abhishek Sahu
2017-12-13 14:25 ` Abhishek Sahu
2017-12-22 0:24 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 09/11] clk: qcom: ipq8074: add GP and Crypto clocks Abhishek Sahu
2017-12-13 14:25 ` Abhishek Sahu
2017-12-22 0:24 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 08/11] clk: qcom: ipq8074: add NSS ethernet port clocks Abhishek Sahu
[not found] ` <1513175142-3702-9-git-send-email-absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-22 0:24 ` Stephen Boyd
2017-12-22 0:24 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 10/11] dt-bindings: clock: qcom: add misc resets for PCIE and NSS Abhishek Sahu
[not found] ` <1513175142-3702-11-git-send-email-absahu-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-15 23:10 ` Rob Herring
2017-12-15 23:10 ` Rob Herring
2017-12-22 0:24 ` Stephen Boyd
2017-12-22 0:24 ` Stephen Boyd
2017-12-13 14:25 ` [PATCH v2 11/11] clk: qcom: ipq8074: " Abhishek Sahu
2017-12-22 0:24 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513175142-3702-6-git-send-email-absahu@codeaurora.org \
--to=absahu-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=david.brown-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.