From: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
To: corbet@lwn.net, andy.gross@linaro.org, david.brown@linaro.org,
robh+dt@kernel.org, mark.rutland@arm.com, wsa@the-dreams.de,
gregkh@linuxfoundation.org
Cc: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>,
linux-doc@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-serial@vger.kernel.org, jslaby@suse.com,
evgreen@chromium.org, acourbot@chromium.org, swboyd@chromium.org
Subject: [PATCH v4 6/6] arm64: dts: sdm845: Add I2C controller support
Date: Wed, 14 Mar 2018 17:58:51 -0600 [thread overview]
Message-ID: <1521071931-9294-7-git-send-email-kramasub@codeaurora.org> (raw)
In-Reply-To: <1521071931-9294-1-git-send-email-kramasub@codeaurora.org>
Add I2C master controller support for a built-in test I2C slave.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 19 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 29 +++++++++++++++++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index ea3efc5..69445f1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -27,6 +27,10 @@
serial@a84000 {
status = "okay";
};
+
+ i2c@a88000 {
+ status = "okay";
+ };
};
pinctrl@3400000 {
@@ -50,5 +54,20 @@
bias-pull-down;
};
};
+
+ qup-i2c10-default {
+ pinconf {
+ pins = "gpio55", "gpio56";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup-i2c10-sleep {
+ pinconf {
+ pins = "gpio55", "gpio56";
+ bias-pull-up;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 59334d9..9ef056f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -209,6 +209,21 @@
pins = "gpio4", "gpio5";
};
};
+
+ qup_i2c10_default: qup-i2c10-default {
+ pinmux {
+ function = "qup10";
+ pins = "gpio55", "gpio56";
+ };
+ };
+
+ qup_i2c10_sleep: qup-i2c10-sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio55", "gpio56";
+ };
+ };
+
};
timer@17c90000 {
@@ -309,6 +324,20 @@
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0xa88000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_i2c10_default>;
+ pinctrl-1 = <&qup_i2c10_sleep>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
};
--
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
To: corbet@lwn.net, andy.gross@linaro.org, david.brown@linaro.org,
robh+dt@kernel.org, mark.rutland@arm.com, wsa@the-dreams.de,
gregkh@linuxfoundation.org
Cc: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>,
linux-doc@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-serial@vger.kernel.org, jslaby@suse.com,
evgreen@chromium.org, acourbot@chromium.org, swboyd@chromium.org
Subject: [PATCH v4 6/6] arm64: dts: sdm845: Add I2C controller support
Date: Wed, 14 Mar 2018 17:58:51 -0600 [thread overview]
Message-ID: <1521071931-9294-7-git-send-email-kramasub@codeaurora.org> (raw)
In-Reply-To: <1521071931-9294-1-git-send-email-kramasub@codeaurora.org>
Add I2C master controller support for a built-in test I2C slave.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 19 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 29 +++++++++++++++++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index ea3efc5..69445f1 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -27,6 +27,10 @@
serial@a84000 {
status = "okay";
};
+
+ i2c@a88000 {
+ status = "okay";
+ };
};
pinctrl@3400000 {
@@ -50,5 +54,20 @@
bias-pull-down;
};
};
+
+ qup-i2c10-default {
+ pinconf {
+ pins = "gpio55", "gpio56";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup-i2c10-sleep {
+ pinconf {
+ pins = "gpio55", "gpio56";
+ bias-pull-up;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 59334d9..9ef056f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -209,6 +209,21 @@
pins = "gpio4", "gpio5";
};
};
+
+ qup_i2c10_default: qup-i2c10-default {
+ pinmux {
+ function = "qup10";
+ pins = "gpio55", "gpio56";
+ };
+ };
+
+ qup_i2c10_sleep: qup-i2c10-sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio55", "gpio56";
+ };
+ };
+
};
timer@17c90000 {
@@ -309,6 +324,20 @@
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0xa88000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_i2c10_default>;
+ pinctrl-1 = <&qup_i2c10_sleep>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
};
--
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-03-14 23:59 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-14 23:58 [PATCH v4 0/6] Introduce GENI SE Controller Driver Karthikeyan Ramasubramanian
2018-03-14 23:58 ` Karthikeyan Ramasubramanian
2018-03-14 23:58 ` [PATCH v4 1/6] dt-bindings: soc: qcom: Add device tree binding for GENI SE Karthikeyan Ramasubramanian
2018-03-14 23:58 ` Karthikeyan Ramasubramanian
2018-03-18 12:52 ` Rob Herring
2018-03-18 12:52 ` Rob Herring
2018-03-20 15:39 ` Stephen Boyd
2018-03-20 15:39 ` Stephen Boyd
2018-03-14 23:58 ` [PATCH v4 2/6] soc: qcom: Add GENI based QUP Wrapper driver Karthikeyan Ramasubramanian
2018-03-14 23:58 ` Karthikeyan Ramasubramanian
2018-03-14 23:58 ` [PATCH v4 3/6] i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller Karthikeyan Ramasubramanian
2018-03-14 23:58 ` Karthikeyan Ramasubramanian
2018-03-19 21:08 ` Doug Anderson
2018-03-19 21:08 ` Doug Anderson
2018-03-20 22:10 ` Karthik Ramasubramanian
2018-03-20 22:10 ` Karthik Ramasubramanian
2018-03-20 22:23 ` Sagar Dharia
2018-03-20 22:23 ` Sagar Dharia
2018-03-14 23:58 ` [PATCH v4 4/6] tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP Karthikeyan Ramasubramanian
2018-03-14 23:58 ` Karthikeyan Ramasubramanian
2018-03-20 15:37 ` Stephen Boyd
2018-03-20 15:37 ` Stephen Boyd
2018-03-20 22:53 ` Karthik Ramasubramanian
2018-03-20 22:53 ` Karthik Ramasubramanian
2018-03-21 17:20 ` Stephen Boyd
2018-03-21 17:20 ` Stephen Boyd
2018-03-22 22:16 ` Karthik Ramasubramanian
2018-03-22 22:16 ` Karthik Ramasubramanian
2018-03-20 18:39 ` Evan Green
2018-03-20 18:39 ` Evan Green
2018-03-20 23:44 ` Karthik Ramasubramanian
2018-03-20 23:44 ` Karthik Ramasubramanian
2018-03-21 0:18 ` Evan Green
2018-03-21 0:18 ` Evan Green
2018-03-14 23:58 ` [PATCH v4 5/6] arm64: dts: sdm845: Add serial console support Karthikeyan Ramasubramanian
2018-03-14 23:58 ` Karthikeyan Ramasubramanian
2018-03-20 19:39 ` Stephen Boyd
2018-03-20 19:39 ` Stephen Boyd
2018-03-21 8:37 ` Rajendra Nayak
2018-03-21 8:37 ` Rajendra Nayak
2018-03-14 23:58 ` Karthikeyan Ramasubramanian [this message]
2018-03-14 23:58 ` [PATCH v4 6/6] arm64: dts: sdm845: Add I2C controller support Karthikeyan Ramasubramanian
2018-03-16 23:54 ` Doug Anderson
2018-03-16 23:54 ` Doug Anderson
2018-03-19 22:15 ` Sagar Dharia
2018-03-19 22:15 ` Sagar Dharia
2018-03-19 23:56 ` Doug Anderson
2018-03-19 23:56 ` Doug Anderson
2018-03-20 7:45 ` Stephen Boyd
2018-03-20 7:45 ` Stephen Boyd
2018-03-20 22:16 ` Sagar Dharia
2018-03-20 22:16 ` Sagar Dharia
2018-03-21 3:47 ` Doug Anderson
2018-03-21 3:47 ` Doug Anderson
2018-03-21 16:07 ` Sagar Dharia
2018-03-21 16:07 ` Sagar Dharia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521071931-9294-7-git-send-email-kramasub@codeaurora.org \
--to=kramasub@codeaurora.org \
--cc=acourbot@chromium.org \
--cc=andy.gross@linaro.org \
--cc=corbet@lwn.net \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=evgreen@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.