All of lore.kernel.org
 help / color / mirror / Atom feed
From: Govind Singh <govinds@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: Govind Singh <govinds@codeaurora.org>, linux-wireless@vger.kernel.org
Subject: [PATCH v2 06/13] ath10k: Add hif power-up/power-down methods
Date: Fri, 23 Mar 2018 10:33:37 +0530	[thread overview]
Message-ID: <1521781424-24972-7-git-send-email-govinds@codeaurora.org> (raw)
In-Reply-To: <1521781424-24972-1-git-send-email-govinds@codeaurora.org>

Add hif power-up/power-down methods for wcn3990
target.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/snoc.c | 61 ++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index a39eee7..9d402e4 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -519,6 +519,65 @@ static int ath10k_snoc_hif_start(struct ath10k *ar)
 	return 0;
 }
 
+static int ath10k_snoc_init_pipes(struct ath10k *ar)
+{
+	int i, ret;
+
+	for (i = 0; i < CE_COUNT; i++) {
+		ret = ath10k_ce_init_pipe(ar, i, &host_ce_config_wlan[i]);
+		if (ret) {
+			ath10k_err(ar, "failed to initialize copy engine pipe %d: %d\n",
+				   i, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int ath10k_snoc_wlan_enable(struct ath10k *ar)
+{
+	return 0;
+}
+
+static void ath10k_snoc_wlan_disable(struct ath10k *ar)
+{
+}
+
+static void ath10k_snoc_hif_power_down(struct ath10k *ar)
+{
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power down\n");
+
+	ath10k_snoc_wlan_disable(ar);
+}
+
+static int ath10k_snoc_hif_power_up(struct ath10k *ar)
+{
+	int ret;
+
+	ath10k_dbg(ar, ATH10K_DBG_SNOC, "%s:WCN3990 driver state = %d\n",
+		   __func__, ar->state);
+
+	ret = ath10k_snoc_wlan_enable(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to enable wcn3990: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_snoc_init_pipes(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to initialize CE: %d\n", ret);
+		goto err_wlan_enable;
+	}
+
+	return 0;
+
+err_wlan_enable:
+	ath10k_snoc_wlan_disable(ar);
+
+	return ret;
+}
+
 static const struct ath10k_hif_ops ath10k_snoc_hif_ops = {
 	.read32		= ath10k_snoc_read32,
 	.write32	= ath10k_snoc_write32,
@@ -526,6 +585,8 @@ static int ath10k_snoc_hif_start(struct ath10k *ar)
 	.stop		= ath10k_snoc_hif_stop,
 	.map_service_to_pipe	= ath10k_snoc_hif_map_service_to_pipe,
 	.get_default_pipe	= ath10k_snoc_hif_get_default_pipe,
+	.power_up		= ath10k_snoc_hif_power_up,
+	.power_down		= ath10k_snoc_hif_power_down,
 };
 
 static const struct ath10k_bus_ops ath10k_snoc_bus_ops = {
-- 
1.9.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

WARNING: multiple messages have this Message-ID (diff)
From: Govind Singh <govinds@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Govind Singh <govinds@codeaurora.org>
Subject: [PATCH v2 06/13] ath10k: Add hif power-up/power-down methods
Date: Fri, 23 Mar 2018 10:33:37 +0530	[thread overview]
Message-ID: <1521781424-24972-7-git-send-email-govinds@codeaurora.org> (raw)
In-Reply-To: <1521781424-24972-1-git-send-email-govinds@codeaurora.org>

Add hif power-up/power-down methods for wcn3990
target.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/snoc.c | 61 ++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index a39eee7..9d402e4 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -519,6 +519,65 @@ static int ath10k_snoc_hif_start(struct ath10k *ar)
 	return 0;
 }
 
+static int ath10k_snoc_init_pipes(struct ath10k *ar)
+{
+	int i, ret;
+
+	for (i = 0; i < CE_COUNT; i++) {
+		ret = ath10k_ce_init_pipe(ar, i, &host_ce_config_wlan[i]);
+		if (ret) {
+			ath10k_err(ar, "failed to initialize copy engine pipe %d: %d\n",
+				   i, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int ath10k_snoc_wlan_enable(struct ath10k *ar)
+{
+	return 0;
+}
+
+static void ath10k_snoc_wlan_disable(struct ath10k *ar)
+{
+}
+
+static void ath10k_snoc_hif_power_down(struct ath10k *ar)
+{
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power down\n");
+
+	ath10k_snoc_wlan_disable(ar);
+}
+
+static int ath10k_snoc_hif_power_up(struct ath10k *ar)
+{
+	int ret;
+
+	ath10k_dbg(ar, ATH10K_DBG_SNOC, "%s:WCN3990 driver state = %d\n",
+		   __func__, ar->state);
+
+	ret = ath10k_snoc_wlan_enable(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to enable wcn3990: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_snoc_init_pipes(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to initialize CE: %d\n", ret);
+		goto err_wlan_enable;
+	}
+
+	return 0;
+
+err_wlan_enable:
+	ath10k_snoc_wlan_disable(ar);
+
+	return ret;
+}
+
 static const struct ath10k_hif_ops ath10k_snoc_hif_ops = {
 	.read32		= ath10k_snoc_read32,
 	.write32	= ath10k_snoc_write32,
@@ -526,6 +585,8 @@ static int ath10k_snoc_hif_start(struct ath10k *ar)
 	.stop		= ath10k_snoc_hif_stop,
 	.map_service_to_pipe	= ath10k_snoc_hif_map_service_to_pipe,
 	.get_default_pipe	= ath10k_snoc_hif_get_default_pipe,
+	.power_up		= ath10k_snoc_hif_power_up,
+	.power_down		= ath10k_snoc_hif_power_down,
 };
 
 static const struct ath10k_bus_ops ath10k_snoc_bus_ops = {
-- 
1.9.1

  parent reply	other threads:[~2018-03-23  5:04 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-23  5:03 [PATCH v2 00/13] ***Set4: Add support of WCN3990 bus layer support *** Govind Singh
2018-03-23  5:03 ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 01/13] ath10k: platform driver for WCN3990 SNOC WLAN module Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-04-19 15:55   ` [v2,01/13] " Kalle Valo
2018-04-19 15:55   ` Kalle Valo
2018-03-23  5:03 ` [PATCH v2 02/13] ath10k: add resource init and deinit for WCN3990 Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 03/13] ath10k: Add hif start/stop methods for wcn3990 snoc layer Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 04/13] ath10k: Add HTC services for WCN3990 Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 05/13] ath10k: Map HTC services to tx/rx pipes for wcn3990 Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` Govind Singh [this message]
2018-03-23  5:03   ` [PATCH v2 06/13] ath10k: Add hif power-up/power-down methods Govind Singh
2018-03-23  5:03 ` [PATCH v2 07/13] ath10k: Add hif tx methods for wcn3990 Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 08/13] ath10k: Add hif rx " Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 09/13] ath10k: Modify hif tx paddr to dma_addr_t type Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 10/13] ath10k: Add support to get target info from hif ops Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 11/13] ath10k: Check all CE for data if irq summary is not retained Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 12/13] ath10k: Vote for hardware resources for WCN3990 Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 13/13] dt: bindings: add bindings for wcn3990 wifi block Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-04-10 14:25   ` [v2,13/13] " Kalle Valo
2018-04-10 14:25   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1521781424-24972-7-git-send-email-govinds@codeaurora.org \
    --to=govinds@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.