All of lore.kernel.org
 help / color / mirror / Atom feed
From: Govind Singh <govinds@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: Govind Singh <govinds@codeaurora.org>, linux-wireless@vger.kernel.org
Subject: [PATCH v2 13/13] dt: bindings: add bindings for wcn3990 wifi block
Date: Fri, 23 Mar 2018 10:33:44 +0530	[thread overview]
Message-ID: <1521781424-24972-14-git-send-email-govinds@codeaurora.org> (raw)
In-Reply-To: <1521781424-24972-1-git-send-email-govinds@codeaurora.org>

Add device tree binding documentation details for wcn3990
wifi block present in Qualcomm SDM845/APQ8098 SoC into
"qcom,ath10k.txt".

Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
 .../bindings/net/wireless/qcom,ath10k.txt          | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 3d2a031..34e4f98 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible: Should be one of the following:
 	* "qcom,ath10k"
 	* "qcom,ipq4019-wifi"
+	* "qcom,wcn3990-wifi"
 
 PCI based devices uses compatible string "qcom,ath10k" and takes calibration
 data along with board specific data via "qcom,ath10k-calibration-data".
@@ -18,8 +19,12 @@ In general, entry "qcom,ath10k-pre-calibration-data" and
 "qcom,ath10k-calibration-data" conflict with each other and only one
 can be provided per device.
 
+SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".
+
 Optional properties:
 - reg: Address and length of the register set for the device.
+- reg-names: Must include the list of following reg names,
+	     "membase"
 - resets: Must contain an entry for each entry in reset-names.
           See ../reset/reseti.txt for details.
 - reset-names: Must include the list of following reset names,
@@ -49,6 +54,8 @@ Optional properties:
 				 hw versions.
 - qcom,ath10k-pre-calibration-data : pre calibration data as an array,
 				     the length can vary between hw versions.
+- <supply-name>-supply: handle to the regulator device tree node
+			   optional "supply-name" is "vdd-0.8-cx-mx".
 
 Example (to supply the calibration data alone):
 
@@ -119,3 +126,27 @@ wifi0: wifi@a000000 {
 	qcom,msi_base = <0x40>;
 	qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
 };
+
+Example (to supply wcn3990 SoC wifi block details):
+
+qcom,wifi@18000000 {
+		compatible = "qcom,wcn3990-wifi";
+		reg = <0x18800000 0x800000>;
+		reg-names = "membase";
+		clocks = <&clock_gcc clk_aggre2_noc_clk>;
+		clock-names = "smmu_aggre2_noc_clk"
+		interrupts =
+			   <0 130 0 /* CE0 */ >,
+			   <0 131 0 /* CE1 */ >,
+			   <0 132 0 /* CE2 */ >,
+			   <0 133 0 /* CE3 */ >,
+			   <0 134 0 /* CE4 */ >,
+			   <0 135 0 /* CE5 */ >,
+			   <0 136 0 /* CE6 */ >,
+			   <0 137 0 /* CE7 */ >,
+			   <0 138 0 /* CE8 */ >,
+			   <0 139 0 /* CE9 */ >,
+			   <0 140 0 /* CE10 */ >,
+			   <0 141 0 /* CE11 */ >;
+		vdd-0.8-cx-mx-supply = <&pm8998_l5>;
+};
-- 
1.9.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

WARNING: multiple messages have this Message-ID (diff)
From: Govind Singh <govinds@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Govind Singh <govinds@codeaurora.org>
Subject: [PATCH v2 13/13] dt: bindings: add bindings for wcn3990 wifi block
Date: Fri, 23 Mar 2018 10:33:44 +0530	[thread overview]
Message-ID: <1521781424-24972-14-git-send-email-govinds@codeaurora.org> (raw)
In-Reply-To: <1521781424-24972-1-git-send-email-govinds@codeaurora.org>

Add device tree binding documentation details for wcn3990
wifi block present in Qualcomm SDM845/APQ8098 SoC into
"qcom,ath10k.txt".

Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
 .../bindings/net/wireless/qcom,ath10k.txt          | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 3d2a031..34e4f98 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible: Should be one of the following:
 	* "qcom,ath10k"
 	* "qcom,ipq4019-wifi"
+	* "qcom,wcn3990-wifi"
 
 PCI based devices uses compatible string "qcom,ath10k" and takes calibration
 data along with board specific data via "qcom,ath10k-calibration-data".
@@ -18,8 +19,12 @@ In general, entry "qcom,ath10k-pre-calibration-data" and
 "qcom,ath10k-calibration-data" conflict with each other and only one
 can be provided per device.
 
+SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".
+
 Optional properties:
 - reg: Address and length of the register set for the device.
+- reg-names: Must include the list of following reg names,
+	     "membase"
 - resets: Must contain an entry for each entry in reset-names.
           See ../reset/reseti.txt for details.
 - reset-names: Must include the list of following reset names,
@@ -49,6 +54,8 @@ Optional properties:
 				 hw versions.
 - qcom,ath10k-pre-calibration-data : pre calibration data as an array,
 				     the length can vary between hw versions.
+- <supply-name>-supply: handle to the regulator device tree node
+			   optional "supply-name" is "vdd-0.8-cx-mx".
 
 Example (to supply the calibration data alone):
 
@@ -119,3 +126,27 @@ wifi0: wifi@a000000 {
 	qcom,msi_base = <0x40>;
 	qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
 };
+
+Example (to supply wcn3990 SoC wifi block details):
+
+qcom,wifi@18000000 {
+		compatible = "qcom,wcn3990-wifi";
+		reg = <0x18800000 0x800000>;
+		reg-names = "membase";
+		clocks = <&clock_gcc clk_aggre2_noc_clk>;
+		clock-names = "smmu_aggre2_noc_clk"
+		interrupts =
+			   <0 130 0 /* CE0 */ >,
+			   <0 131 0 /* CE1 */ >,
+			   <0 132 0 /* CE2 */ >,
+			   <0 133 0 /* CE3 */ >,
+			   <0 134 0 /* CE4 */ >,
+			   <0 135 0 /* CE5 */ >,
+			   <0 136 0 /* CE6 */ >,
+			   <0 137 0 /* CE7 */ >,
+			   <0 138 0 /* CE8 */ >,
+			   <0 139 0 /* CE9 */ >,
+			   <0 140 0 /* CE10 */ >,
+			   <0 141 0 /* CE11 */ >;
+		vdd-0.8-cx-mx-supply = <&pm8998_l5>;
+};
-- 
1.9.1

  parent reply	other threads:[~2018-03-23  5:04 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-23  5:03 [PATCH v2 00/13] ***Set4: Add support of WCN3990 bus layer support *** Govind Singh
2018-03-23  5:03 ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 01/13] ath10k: platform driver for WCN3990 SNOC WLAN module Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-04-19 15:55   ` [v2,01/13] " Kalle Valo
2018-04-19 15:55   ` Kalle Valo
2018-03-23  5:03 ` [PATCH v2 02/13] ath10k: add resource init and deinit for WCN3990 Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 03/13] ath10k: Add hif start/stop methods for wcn3990 snoc layer Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 04/13] ath10k: Add HTC services for WCN3990 Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 05/13] ath10k: Map HTC services to tx/rx pipes for wcn3990 Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 06/13] ath10k: Add hif power-up/power-down methods Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 07/13] ath10k: Add hif tx methods for wcn3990 Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 08/13] ath10k: Add hif rx " Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 09/13] ath10k: Modify hif tx paddr to dma_addr_t type Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 10/13] ath10k: Add support to get target info from hif ops Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 11/13] ath10k: Check all CE for data if irq summary is not retained Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` [PATCH v2 12/13] ath10k: Vote for hardware resources for WCN3990 Govind Singh
2018-03-23  5:03   ` Govind Singh
2018-03-23  5:03 ` Govind Singh [this message]
2018-03-23  5:03   ` [PATCH v2 13/13] dt: bindings: add bindings for wcn3990 wifi block Govind Singh
2018-04-10 14:25   ` [v2,13/13] " Kalle Valo
2018-04-10 14:25   ` Kalle Valo
  -- strict thread matches above, loose matches on Subject: below --
2018-04-10 16:49 [PATCH v2 13/13] " Govind Singh
2018-04-10 16:49 ` Govind Singh
2018-04-13 21:53 ` Rob Herring
2018-04-13 21:53   ` Rob Herring
2018-04-13 21:53   ` Rob Herring
2018-04-16 15:00   ` Kalle Valo
2018-04-16 15:00     ` Kalle Valo
2018-04-16 15:00     ` Kalle Valo
2018-04-17  4:27     ` govinds
2018-04-17  4:27       ` govinds-sgV2jX0FEOL9JmXXK+q4OQ
2018-04-17  4:27       ` govinds

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1521781424-24972-14-git-send-email-govinds@codeaurora.org \
    --to=govinds@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.