From: Ilia Lin <ilialin@codeaurora.org>
To: mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
mark.rutland@arm.com, viresh.kumar@linaro.org, nm@ti.com,
lgirdwood@gmail.com, broonie@kernel.org, andy.gross@linaro.org,
david.brown@linaro.org, catalin.marinas@arm.com,
will.deacon@arm.com, rjw@rjwysocki.net,
linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
rnayak@codeaurora.org, ilialin@codeaurora.org,
amit.kucheria@linaro.org, nicolas.dechesne@linaro.org,
celster@codeaurora.org, tfinkel@codeaurora.org
Subject: [PATCH v8 12/15] dt: qcom: Add qcom-cpufreq-kryo driver configuration
Date: Thu, 17 May 2018 14:19:12 +0300 [thread overview]
Message-ID: <1526555955-29960-13-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1526555955-29960-1-git-send-email-ilialin@codeaurora.org>
1. Add NVMEM node for the speedbin
2. Add definitions for all possible MSM8996 CPU OPPs.
The qcom-cpufreq-kryo driver will select the appropriate subset.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 281 ++++++++++++++++++++++++++--
2 files changed, 270 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 230e9c8..da23bda 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -17,5 +17,5 @@
/ {
model = "Qualcomm Technologies, Inc. DB820c";
- compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc";
+ compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index e6cf290..d96a112 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1,13 +1,6 @@
-/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2015, 2018 The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -169,177 +162,436 @@
};
cluster0_opp: opp_table0 {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2-kryo-cpu",
+ "operating-points-v2";
+ nvmem-cells = <&speedbin_efuse>;
opp-shared;
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-422400000 {
opp-hz = /bits/ 64 <422400000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-460800000 {
+ opp-hz = /bits/ 64 <460800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-537600000 {
+ opp-hz = /bits/ 64 <537600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-556800000 {
opp-hz = /bits/ 64 <556800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-614400000 {
+ opp-hz = /bits/ 64 <614400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-729600000 {
opp-hz = /bits/ 64 <729600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-768000000 {
+ opp-hz = /bits/ 64 <768000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-844800000 {
opp-hz = /bits/ 64 <844800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-960000000 {
opp-hz = /bits/ 64 <960000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1036800000 {
opp-hz = /bits/ 64 <1036800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1132800000 {
+ opp-hz = /bits/ 64 <1132800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1228800000 {
opp-hz = /bits/ 64 <1228800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
+ opp-supported-hw = <0x5>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-supported-hw = <0x72>;
clock-latency-ns = <200000>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
+ opp-supported-hw = <0x5>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-supported-hw = <0x4>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1593600000 {
opp-hz = /bits/ 64 <1593600000>;
+ opp-supported-hw = <0x71>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ opp-supported-hw = <0x20>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2188800000 {
+ opp-hz = /bits/ 64 <2188800000>;
+ opp-supported-hw = <0x10>;
clock-latency-ns = <200000>;
};
};
cluster1_opp: opp_table1 {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
opp-shared;
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-460800000 {
+ opp-hz = /bits/ 64 <460800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-537600000 {
+ opp-hz = /bits/ 64 <537600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-556800000 {
opp-hz = /bits/ 64 <556800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-614400000 {
+ opp-hz = /bits/ 64 <614400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-729600000 {
opp-hz = /bits/ 64 <729600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-748800000 {
+ opp-hz = /bits/ 64 <748800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-806400000 {
opp-hz = /bits/ 64 <806400000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-883200000 {
opp-hz = /bits/ 64 <883200000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-940800000 {
opp-hz = /bits/ 64 <940800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1036800000 {
opp-hz = /bits/ 64 <1036800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1132800000 {
+ opp-hz = /bits/ 64 <1132800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1248000000 {
opp-hz = /bits/ 64 <1248000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1555200000 {
opp-hz = /bits/ 64 <1555200000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1632000000 {
opp-hz = /bits/ 64 <1632000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1670400000 {
+ opp-hz = /bits/ 64 <1670400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1708800000 {
opp-hz = /bits/ 64 <1708800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1747200000 {
+ opp-hz = /bits/ 64 <1747200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1785600000 {
opp-hz = /bits/ 64 <1785600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-supported-hw = <0x6>;
clock-latency-ns = <200000>;
};
opp-1824000000 {
opp-hz = /bits/ 64 <1824000000>;
+ opp-supported-hw = <0x71>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-supported-hw = <0x74>;
clock-latency-ns = <200000>;
};
opp-1920000000 {
opp-hz = /bits/ 64 <1920000000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1977600000 {
+ opp-hz = /bits/ 64 <1977600000>;
+ opp-supported-hw = <0x30>;
clock-latency-ns = <200000>;
};
opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2054400000 {
+ opp-hz = /bits/ 64 <2054400000>;
+ opp-supported-hw = <0x30>;
clock-latency-ns = <200000>;
};
opp-2073600000 {
opp-hz = /bits/ 64 <2073600000>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-2150400000 {
opp-hz = /bits/ 64 <2150400000>;
+ opp-supported-hw = <0x31>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2246400000 {
+ opp-hz = /bits/ 64 <2246400000>;
+ opp-supported-hw = <0x10>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2342400000 {
+ opp-hz = /bits/ 64 <2342400000>;
+ opp-supported-hw = <0x10>;
clock-latency-ns = <200000>;
};
};
@@ -917,6 +1169,11 @@
reg = <0x24f 0x1>;
bits = <1 4>;
};
+
+ speedbin_efuse: speedbin@133 {
+ reg = <0x133 0x1>;
+ bits = <5 3>;
+ };
};
phy@34000 {
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: ilialin@codeaurora.org (Ilia Lin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 12/15] dt: qcom: Add qcom-cpufreq-kryo driver configuration
Date: Thu, 17 May 2018 14:19:12 +0300 [thread overview]
Message-ID: <1526555955-29960-13-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1526555955-29960-1-git-send-email-ilialin@codeaurora.org>
1. Add NVMEM node for the speedbin
2. Add definitions for all possible MSM8996 CPU OPPs.
The qcom-cpufreq-kryo driver will select the appropriate subset.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 281 ++++++++++++++++++++++++++--
2 files changed, 270 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 230e9c8..da23bda 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -17,5 +17,5 @@
/ {
model = "Qualcomm Technologies, Inc. DB820c";
- compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc";
+ compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index e6cf290..d96a112 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1,13 +1,6 @@
-/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014-2015, 2018 The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -169,177 +162,436 @@
};
cluster0_opp: opp_table0 {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2-kryo-cpu",
+ "operating-points-v2";
+ nvmem-cells = <&speedbin_efuse>;
opp-shared;
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-422400000 {
opp-hz = /bits/ 64 <422400000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-460800000 {
+ opp-hz = /bits/ 64 <460800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-537600000 {
+ opp-hz = /bits/ 64 <537600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-556800000 {
opp-hz = /bits/ 64 <556800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-614400000 {
+ opp-hz = /bits/ 64 <614400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-729600000 {
opp-hz = /bits/ 64 <729600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-768000000 {
+ opp-hz = /bits/ 64 <768000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-844800000 {
opp-hz = /bits/ 64 <844800000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-960000000 {
opp-hz = /bits/ 64 <960000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1036800000 {
opp-hz = /bits/ 64 <1036800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1132800000 {
+ opp-hz = /bits/ 64 <1132800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1228800000 {
opp-hz = /bits/ 64 <1228800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
+ opp-supported-hw = <0x5>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-supported-hw = <0x72>;
clock-latency-ns = <200000>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
+ opp-supported-hw = <0x5>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-supported-hw = <0x4>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1593600000 {
opp-hz = /bits/ 64 <1593600000>;
+ opp-supported-hw = <0x71>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ opp-supported-hw = <0x20>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2188800000 {
+ opp-hz = /bits/ 64 <2188800000>;
+ opp-supported-hw = <0x10>;
clock-latency-ns = <200000>;
};
};
cluster1_opp: opp_table1 {
- compatible = "operating-points-v2";
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
opp-shared;
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
+ opp-supported-hw = <0x77>;
+ clock-latency-ns = <200000>;
+ };
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-403200000 {
opp-hz = /bits/ 64 <403200000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-460800000 {
+ opp-hz = /bits/ 64 <460800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-480000000 {
opp-hz = /bits/ 64 <480000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-537600000 {
+ opp-hz = /bits/ 64 <537600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-556800000 {
opp-hz = /bits/ 64 <556800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-614400000 {
+ opp-hz = /bits/ 64 <614400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-691200000 {
+ opp-hz = /bits/ 64 <691200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-729600000 {
opp-hz = /bits/ 64 <729600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-748800000 {
+ opp-hz = /bits/ 64 <748800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-806400000 {
opp-hz = /bits/ 64 <806400000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-883200000 {
opp-hz = /bits/ 64 <883200000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-940800000 {
opp-hz = /bits/ 64 <940800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1036800000 {
opp-hz = /bits/ 64 <1036800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1132800000 {
+ opp-hz = /bits/ 64 <1132800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1190400000 {
opp-hz = /bits/ 64 <1190400000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1248000000 {
opp-hz = /bits/ 64 <1248000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1401600000 {
opp-hz = /bits/ 64 <1401600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1440000000 {
+ opp-hz = /bits/ 64 <1440000000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1555200000 {
opp-hz = /bits/ 64 <1555200000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1593600000 {
+ opp-hz = /bits/ 64 <1593600000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1632000000 {
opp-hz = /bits/ 64 <1632000000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1670400000 {
+ opp-hz = /bits/ 64 <1670400000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1708800000 {
opp-hz = /bits/ 64 <1708800000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1747200000 {
+ opp-hz = /bits/ 64 <1747200000>;
+ opp-supported-hw = <0x70>;
clock-latency-ns = <200000>;
};
opp-1785600000 {
opp-hz = /bits/ 64 <1785600000>;
+ opp-supported-hw = <0x7>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-supported-hw = <0x6>;
clock-latency-ns = <200000>;
};
opp-1824000000 {
opp-hz = /bits/ 64 <1824000000>;
+ opp-supported-hw = <0x71>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1900800000 {
+ opp-hz = /bits/ 64 <1900800000>;
+ opp-supported-hw = <0x74>;
clock-latency-ns = <200000>;
};
opp-1920000000 {
opp-hz = /bits/ 64 <1920000000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-1977600000 {
+ opp-hz = /bits/ 64 <1977600000>;
+ opp-supported-hw = <0x30>;
clock-latency-ns = <200000>;
};
opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2054400000 {
+ opp-hz = /bits/ 64 <2054400000>;
+ opp-supported-hw = <0x30>;
clock-latency-ns = <200000>;
};
opp-2073600000 {
opp-hz = /bits/ 64 <2073600000>;
+ opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
opp-2150400000 {
opp-hz = /bits/ 64 <2150400000>;
+ opp-supported-hw = <0x31>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2246400000 {
+ opp-hz = /bits/ 64 <2246400000>;
+ opp-supported-hw = <0x10>;
+ clock-latency-ns = <200000>;
+ };
+ opp-2342400000 {
+ opp-hz = /bits/ 64 <2342400000>;
+ opp-supported-hw = <0x10>;
clock-latency-ns = <200000>;
};
};
@@ -917,6 +1169,11 @@
reg = <0x24f 0x1>;
bits = <1 4>;
};
+
+ speedbin_efuse: speedbin at 133 {
+ reg = <0x133 0x1>;
+ bits = <5 3>;
+ };
};
phy at 34000 {
--
1.9.1
next prev parent reply other threads:[~2018-05-17 11:19 UTC|newest]
Thread overview: 114+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-17 11:19 [PATCH v8 00/15] CPU scaling support for msm8996 Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 01/15] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 02/15] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 03/15] clk: Use devm_ in the register fixed factor clock Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 04/15] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-22 13:49 ` kbuild test robot
2018-05-22 13:49 ` kbuild test robot
2018-05-22 13:49 ` kbuild test robot
2018-05-17 11:19 ` [PATCH v8 05/15] dt-bindings: clk: qcom: Add bindings for CPU clock " Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 06/15] clk: qcom: cpu-8996: Add support to switch to alternate PLL Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 07/15] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 08/15] clk: qcom: Add ACD path to CPU clock driver for msm8996 Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 09/15] dt: qcom: Add opp and thermal to the msm8996 Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 10/15] cpufreq: Add Kryo CPU scaling driver Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-18 1:45 ` Viresh Kumar
2018-05-18 1:45 ` Viresh Kumar
2018-05-19 11:09 ` ilialin
2018-05-19 11:09 ` ilialin at codeaurora.org
2018-05-19 11:09 ` ilialin
2018-05-19 11:54 ` Russell King - ARM Linux
2018-05-19 11:54 ` Russell King - ARM Linux
2018-05-19 11:41 ` ilialin
2018-05-19 11:41 ` ilialin at codeaurora.org
2018-05-19 11:41 ` ilialin
2018-05-19 11:45 ` ilialin
2018-05-19 11:45 ` ilialin at codeaurora.org
2018-05-19 11:45 ` ilialin
2018-05-21 4:49 ` Viresh Kumar
2018-05-21 4:49 ` Viresh Kumar
2018-05-21 9:00 ` ilialin
2018-05-21 9:00 ` ilialin at codeaurora.org
2018-05-21 9:00 ` ilialin
2018-05-21 9:05 ` Viresh Kumar
2018-05-21 9:05 ` Viresh Kumar
2018-05-19 11:35 ` [PATCH] " Ilia Lin
2018-05-19 11:35 ` Ilia Lin
2018-05-21 5:04 ` Viresh Kumar
2018-05-21 5:04 ` Viresh Kumar
2018-05-21 12:50 ` Sudeep Holla
2018-05-21 12:50 ` Sudeep Holla
2018-05-21 12:57 ` ilialin
2018-05-21 12:57 ` ilialin
2018-05-21 12:57 ` ilialin at codeaurora.org
2018-05-21 12:57 ` ilialin
2018-05-21 13:04 ` Sudeep Holla
2018-05-21 13:04 ` Sudeep Holla
2018-05-22 6:56 ` ilialin
2018-05-22 6:56 ` ilialin
2018-05-22 6:56 ` ilialin at codeaurora.org
2018-05-22 6:56 ` ilialin
2018-05-22 9:12 ` Sudeep Holla
2018-05-22 9:12 ` Sudeep Holla
2018-05-22 7:59 ` ilialin
2018-05-22 7:59 ` ilialin
2018-05-22 7:59 ` ilialin at codeaurora.org
2018-05-22 7:59 ` ilialin
2018-05-22 9:18 ` Sudeep Holla
2018-05-22 9:18 ` Sudeep Holla
2018-05-22 9:38 ` Viresh Kumar
2018-05-22 9:38 ` Viresh Kumar
2018-05-22 11:29 ` Ilia Lin
2018-05-22 11:29 ` Ilia Lin
2018-05-22 13:07 ` Sudeep Holla
2018-05-22 13:07 ` Sudeep Holla
2018-05-23 5:44 ` Viresh Kumar
2018-05-23 5:44 ` Viresh Kumar
2018-05-23 9:05 ` Ilia Lin
2018-05-23 9:05 ` Ilia Lin
2018-05-23 9:32 ` Viresh Kumar
2018-05-23 9:32 ` Viresh Kumar
2018-05-23 9:40 ` Russell King - ARM Linux
2018-05-23 9:40 ` Russell King - ARM Linux
2018-05-23 9:59 ` Viresh Kumar
2018-05-23 9:59 ` Viresh Kumar
2018-05-21 10:31 ` Ilia Lin
2018-05-21 10:31 ` Ilia Lin
2018-05-21 10:37 ` Viresh Kumar
2018-05-21 10:37 ` Viresh Kumar
2018-05-21 10:54 ` Russell King - ARM Linux
2018-05-21 10:54 ` Russell King - ARM Linux
2018-05-21 11:05 ` ilialin
2018-05-21 11:05 ` ilialin at codeaurora.org
2018-05-21 11:05 ` ilialin
2018-05-21 12:11 ` Russell King - ARM Linux
2018-05-21 12:11 ` Russell King - ARM Linux
2018-05-21 12:35 ` ilialin
2018-05-21 12:35 ` ilialin at codeaurora.org
2018-05-21 12:35 ` ilialin
2018-05-21 12:41 ` Russell King - ARM Linux
2018-05-21 12:41 ` Russell King - ARM Linux
2018-05-17 11:19 ` [PATCH v8 11/15] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-18 14:26 ` Rob Herring
2018-05-18 14:26 ` Rob Herring
2018-05-17 11:19 ` Ilia Lin [this message]
2018-05-17 11:19 ` [PATCH v8 12/15] dt: qcom: Add qcom-cpufreq-kryo driver configuration Ilia Lin
2018-05-17 11:19 ` [PATCH v8 13/15] regulator: qcom_spmi: Add support for SAW Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 14/15] dt-bindings: qcom_spmi: Document SAW support Ilia Lin
2018-05-17 11:19 ` Ilia Lin
2018-05-17 11:19 ` [PATCH v8 15/15] dt: qcom: Add SAW regulator for 8x96 CPUs Ilia Lin
2018-05-17 11:19 ` Ilia Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526555955-29960-13-git-send-email-ilialin@codeaurora.org \
--to=ilialin@codeaurora.org \
--cc=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=celster@codeaurora.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nicolas.dechesne@linaro.org \
--cc=nm@ti.com \
--cc=rjw@rjwysocki.net \
--cc=rnayak@codeaurora.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=tfinkel@codeaurora.org \
--cc=viresh.kumar@linaro.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.