From: Talel Shenhar <talel@amazon.com>
To: <broonie@kernel.org>, <linux-spi@vger.kernel.org>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <talel@amazon.com>, <jonnyc@amazon.com>, <ronenk@amazon.com>,
<barakw@amazon.com>, David Woodhouse <dwmw@amazon.co.uk>
Subject: [PATCH 2/2] dw: spi: add support for Alpine spi controller
Date: Wed, 10 Oct 2018 18:15:16 +0300 [thread overview]
Message-ID: <1539184516-8200-2-git-send-email-talel@amazon.com> (raw)
In-Reply-To: <1539184516-8200-1-git-send-email-talel@amazon.com>
Add support for a new devicetree compatible string called
'al,alpine-apb-ssi', which is necessary for the Amazon Alpine spi
controller. 'al,alpine-dw-apb-ssi' is used in the dw spi driver if
specified in the devicetree. Otherwise, fall back to driver default
behavior, i.e. original dw IP hw driver behavior.
Signed-off-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
drivers/spi/spi-dw-mmio.c | 9 +++++++++
drivers/spi/spi-dw.c | 6 ++++++
drivers/spi/spi-dw.h | 2 ++
3 files changed, 17 insertions(+)
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index a768461..88b04d2 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -126,6 +126,14 @@ static int dw_spi_mscc_jaguar2_init(struct platform_device *pdev,
JAGUAR2_IF_SI_OWNER_OFFSET);
}
+static int dw_spi_alpine_init(struct platform_device *pdev,
+ struct dw_spi_mmio *dwsmmio)
+{
+ dwsmmio->dws.cs_override = 1;
+
+ return 0;
+}
+
static int dw_spi_mmio_probe(struct platform_device *pdev)
{
int (*init_func)(struct platform_device *pdev,
@@ -230,6 +238,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
{ .compatible = "snps,dw-apb-ssi", },
{ .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_ocelot_init},
{ .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init},
+ { .compatible = "al,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
{ /* end of table */}
};
MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 3e205ab..b705f2b 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -144,6 +144,8 @@ void dw_spi_set_cs(struct spi_device *spi, bool enable)
if (!enable)
dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
+ else if (dws->cs_override)
+ dw_writel(dws, DW_SPI_SER, 0);
}
EXPORT_SYMBOL_GPL(dw_spi_set_cs);
@@ -463,6 +465,10 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
dws->fifo_len = (fifo == 1) ? 0 : fifo;
dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
}
+
+ /* enable HW fixup for explicit CS deselect for Amazon's alpine chip */
+ if (dws->cs_override)
+ dw_writel(dws, DW_SPI_CS_OVERRIDE, 0xF);
}
int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 0168b08..c9c1588 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -32,6 +32,7 @@
#define DW_SPI_IDR 0x58
#define DW_SPI_VERSION 0x5c
#define DW_SPI_DR 0x60
+#define DW_SPI_CS_OVERRIDE 0xf4
/* Bit fields in CTRLR0 */
#define SPI_DFS_OFFSET 0
@@ -109,6 +110,7 @@ struct dw_spi {
u32 fifo_len; /* depth of the FIFO buffer */
u32 max_freq; /* max bus freq supported */
+ int cs_override;
u32 reg_io_width; /* DR I/O width in bytes */
u16 bus_num;
u16 num_cs; /* supported slave numbers */
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Talel Shenhar <talel@amazon.com>
To: broonie@kernel.org, linux-spi@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: talel@amazon.com, jonnyc@amazon.com, ronenk@amazon.com,
barakw@amazon.com, David Woodhouse <dwmw@amazon.co.uk>
Subject: [PATCH 2/2] dw: spi: add support for Alpine spi controller
Date: Wed, 10 Oct 2018 18:15:16 +0300 [thread overview]
Message-ID: <1539184516-8200-2-git-send-email-talel@amazon.com> (raw)
In-Reply-To: <1539184516-8200-1-git-send-email-talel@amazon.com>
Add support for a new devicetree compatible string called
'al,alpine-apb-ssi', which is necessary for the Amazon Alpine spi
controller. 'al,alpine-dw-apb-ssi' is used in the dw spi driver if
specified in the devicetree. Otherwise, fall back to driver default
behavior, i.e. original dw IP hw driver behavior.
Signed-off-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
drivers/spi/spi-dw-mmio.c | 9 +++++++++
drivers/spi/spi-dw.c | 6 ++++++
drivers/spi/spi-dw.h | 2 ++
3 files changed, 17 insertions(+)
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index a768461..88b04d2 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -126,6 +126,14 @@ static int dw_spi_mscc_jaguar2_init(struct platform_device *pdev,
JAGUAR2_IF_SI_OWNER_OFFSET);
}
+static int dw_spi_alpine_init(struct platform_device *pdev,
+ struct dw_spi_mmio *dwsmmio)
+{
+ dwsmmio->dws.cs_override = 1;
+
+ return 0;
+}
+
static int dw_spi_mmio_probe(struct platform_device *pdev)
{
int (*init_func)(struct platform_device *pdev,
@@ -230,6 +238,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
{ .compatible = "snps,dw-apb-ssi", },
{ .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_ocelot_init},
{ .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init},
+ { .compatible = "al,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
{ /* end of table */}
};
MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 3e205ab..b705f2b 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -144,6 +144,8 @@ void dw_spi_set_cs(struct spi_device *spi, bool enable)
if (!enable)
dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
+ else if (dws->cs_override)
+ dw_writel(dws, DW_SPI_SER, 0);
}
EXPORT_SYMBOL_GPL(dw_spi_set_cs);
@@ -463,6 +465,10 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
dws->fifo_len = (fifo == 1) ? 0 : fifo;
dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
}
+
+ /* enable HW fixup for explicit CS deselect for Amazon's alpine chip */
+ if (dws->cs_override)
+ dw_writel(dws, DW_SPI_CS_OVERRIDE, 0xF);
}
int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 0168b08..c9c1588 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -32,6 +32,7 @@
#define DW_SPI_IDR 0x58
#define DW_SPI_VERSION 0x5c
#define DW_SPI_DR 0x60
+#define DW_SPI_CS_OVERRIDE 0xf4
/* Bit fields in CTRLR0 */
#define SPI_DFS_OFFSET 0
@@ -109,6 +110,7 @@ struct dw_spi {
u32 fifo_len; /* depth of the FIFO buffer */
u32 max_freq; /* max bus freq supported */
+ int cs_override;
u32 reg_io_width; /* DR I/O width in bytes */
u16 bus_num;
u16 num_cs; /* supported slave numbers */
--
2.7.4
next prev parent reply other threads:[~2018-10-10 15:15 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-10 7:08 [PATCH 1/2] dt-bindings: spi: dw: add cs-override property Talel Shenhar
2018-10-10 7:08 ` Talel Shenhar
2018-10-10 7:08 ` [PATCH 2/2] dw: spi: add 'cs-override' DT property support Talel Shenhar
2018-10-10 7:08 ` Talel Shenhar
2018-10-10 10:18 ` [PATCH 1/2] dt-bindings: spi: dw: add cs-override property Mark Brown
2018-10-10 10:34 ` Talel Shenhar
2018-10-10 10:34 ` Talel Shenhar
2018-10-10 11:29 ` David Woodhouse
2018-10-10 11:29 ` David Woodhouse
2018-10-10 11:23 ` Talel Shenhar
2018-10-10 11:23 ` Talel Shenhar
2018-10-10 11:27 ` Mark Brown
2018-10-10 11:58 ` Woodhouse, David
2018-10-10 12:27 ` Mark Brown
2018-10-10 22:52 ` Trent Piepho
2018-10-10 15:15 ` [PATCH 1/2] dt-bindings: spi: dw: add compatible for Alpine spi controller Talel Shenhar
2018-10-10 15:15 ` Talel Shenhar
2018-10-10 15:15 ` Talel Shenhar [this message]
2018-10-10 15:15 ` [PATCH 2/2] dw: spi: add support " Talel Shenhar
2018-10-10 22:08 ` Trent Piepho
2018-10-11 11:20 ` [PATCH 1/2] dt-bindings: spi: dw: add compatible for Amazon's " Talel Shenhar
2018-10-11 11:20 ` Talel Shenhar
2018-10-11 11:20 ` [PATCH 2/2] dw: spi: add support " Talel Shenhar
2018-10-11 11:20 ` Talel Shenhar
2018-10-11 14:58 ` Applied "dw: spi: add support for Amazon's Alpine spi controller" to the spi tree Mark Brown
2018-10-11 14:58 ` Mark Brown
2018-10-11 14:58 ` Mark Brown
2018-10-11 13:44 ` [PATCH 1/2] dt-bindings: spi: dw: add compatible for Amazon's Alpine spi controller Mark Brown
2018-10-11 14:58 ` Applied "spi: dw: add compatible for Amazon's Alpine spi controller" to the spi tree Mark Brown
2018-10-11 14:58 ` Mark Brown
2018-10-11 14:58 ` Mark Brown
2018-10-11 11:22 ` [PATCH 2/2] dw: spi: add support for Alpine spi controller Talel Shenhar
2018-10-10 22:21 ` [PATCH 1/2] dt-bindings: spi: dw: add cs-override property Trent Piepho
2018-10-11 7:39 ` Talel Shenhar
2018-10-11 7:39 ` Talel Shenhar
2018-10-11 13:46 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1539184516-8200-2-git-send-email-talel@amazon.com \
--to=talel@amazon.com \
--cc=barakw@amazon.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dwmw@amazon.co.uk \
--cc=jonnyc@amazon.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=ronenk@amazon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.