All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Martin <Dave.Martin@arm.com>
To: kvmarm@lists.cs.columbia.edu
Cc: Okamoto Takayuki <tokamoto@jp.fujitsu.com>,
	Christoffer Dall <cdall@kernel.org>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Zhang Lei <zhang.lei@jp.fujitsu.com>,
	Julien Grall <julien.grall@arm.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 27/27] KVM: arm64/sve: Document KVM API extensions for SVE
Date: Tue, 19 Mar 2019 17:52:18 +0000	[thread overview]
Message-ID: <1553017938-710-28-git-send-email-Dave.Martin@arm.com> (raw)
In-Reply-To: <1553017938-710-1-git-send-email-Dave.Martin@arm.com>

This patch adds sections to the KVM API documentation describing
the extensions for supporting the Scalable Vector Extension (SVE)
in guests.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>

---

Changes since v5:

 * Document KVM_ARM_VCPU_FINALIZE and its interactions with SVE.
---
 Documentation/virtual/kvm/api.txt | 132 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 129 insertions(+), 3 deletions(-)

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index cd920dd..68509de 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1873,6 +1873,7 @@ Parameters: struct kvm_one_reg (in)
 Returns: 0 on success, negative value on failure
 Errors:
   ENOENT:   no such register
+  EPERM:    register access forbidden for architecture-dependent reasons
   EINVAL:   other errors, such as bad size encoding for a known register
 
 struct kvm_one_reg {
@@ -2127,13 +2128,20 @@ Specifically:
   0x6030 0000 0010 004c SPSR_UND    64  spsr[KVM_SPSR_UND]
   0x6030 0000 0010 004e SPSR_IRQ    64  spsr[KVM_SPSR_IRQ]
   0x6060 0000 0010 0050 SPSR_FIQ    64  spsr[KVM_SPSR_FIQ]
-  0x6040 0000 0010 0054 V0         128  fp_regs.vregs[0]
-  0x6040 0000 0010 0058 V1         128  fp_regs.vregs[1]
+  0x6040 0000 0010 0054 V0         128  fp_regs.vregs[0]    (*)
+  0x6040 0000 0010 0058 V1         128  fp_regs.vregs[1]    (*)
     ...
-  0x6040 0000 0010 00d0 V31        128  fp_regs.vregs[31]
+  0x6040 0000 0010 00d0 V31        128  fp_regs.vregs[31]   (*)
   0x6020 0000 0010 00d4 FPSR        32  fp_regs.fpsr
   0x6020 0000 0010 00d5 FPCR        32  fp_regs.fpcr
 
+(*) These encodings are not accepted for SVE-enabled vcpus.  See
+    KVM_ARM_VCPU_INIT.
+
+    The equivalent register content can be accessed via bits [127:0] of
+    the corresponding SVE Zn registers instead for vcpus that have SVE
+    enabled (see below).
+
 arm64 CCSIDR registers are demultiplexed by CSSELR value:
   0x6020 0000 0011 00 <csselr:8>
 
@@ -2143,6 +2151,61 @@ arm64 system registers have the following id bit patterns:
 arm64 firmware pseudo-registers have the following bit pattern:
   0x6030 0000 0014 <regno:16>
 
+arm64 SVE registers have the following bit patterns:
+  0x6080 0000 0015 00 <n:5> <slice:5>   Zn bits[2048*slice + 2047 : 2048*slice]
+  0x6050 0000 0015 04 <n:4> <slice:5>   Pn bits[256*slice + 255 : 256*slice]
+  0x6050 0000 0015 060 <slice:5>        FFR bits[256*slice + 255 : 256*slice]
+  0x6060 0000 0015 ffff                 KVM_REG_ARM64_SVE_VLS pseudo-register
+
+Access to slices beyond the maximum vector length configured for the
+vcpu (i.e., where 16 * slice >= max_vq (**)) will fail with ENOENT.
+
+These registers are only accessible on vcpus for which SVE is enabled.
+See KVM_ARM_VCPU_INIT for details.
+
+In addition, except for KVM_REG_ARM64_SVE_VLS, these registers are not
+accessible until the vcpu's SVE configuration has been finalized
+using KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE).  See KVM_ARM_VCPU_INIT
+and KVM_ARM_VCPU_FINALIZE for more information about this procedure.
+
+KVM_REG_ARM64_SVE_VLS is a pseudo-register that allows the set of vector
+lengths supported by the vcpu to be discovered and configured by
+userspace.  When transferred to or from user memory via KVM_GET_ONE_REG
+or KVM_SET_ONE_REG, the value of this register is of type __u64[8], and
+encodes the set of vector lengths as follows:
+
+__u64 vector_lengths[8];
+
+if (vq >= SVE_VQ_MIN && vq <= SVE_VQ_MAX &&
+    ((vector_lengths[(vq - 1) / 64] >> ((vq - 1) % 64)) & 1))
+	/* Vector length vq * 16 bytes supported */
+else
+	/* Vector length vq * 16 bytes not supported */
+
+(**) The maximum value vq for which the above condition is true is
+max_vq.  This is the maximum vector length available to the guest on
+this vcpu, and determines which register slices are visible through
+this ioctl interface.
+
+(See Documentation/arm64/sve.txt for an explanation of the "vq"
+nomenclature.)
+
+KVM_REG_ARM64_SVE_VLS is only accessible after KVM_ARM_VCPU_INIT.
+KVM_ARM_VCPU_INIT initialises it to the best set of vector lengths that
+the host supports.
+
+Userspace may subsequently modify it if desired until the vcpu's SVE
+configuration is finalized using KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE).
+
+Apart from simply removing all vector lengths from the host set that
+exceed some value, support for arbitrarily chosen sets of vector lengths
+is hardware-dependent and may not be available.  Attempting to configure
+an invalid set of vector lengths via KVM_SET_ONE_REG will fail with
+EINVAL.
+
+After the vcpu's SVE configuration is finalized, further attempts to
+write this register will fail with EPERM.
+
 
 MIPS registers are mapped using the lower 32 bits.  The upper 16 of that is
 the register group type:
@@ -2197,6 +2260,7 @@ Parameters: struct kvm_one_reg (in and out)
 Returns: 0 on success, negative value on failure
 Errors:
   ENOENT:   no such register
+  EPERM:    register access forbidden for architecture-dependent reasons
   EINVAL:   other errors, such as bad size encoding for a known register
 
 This ioctl allows to receive the value of a single register implemented
@@ -2690,6 +2754,33 @@ Possible features:
 	- KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU.
 	  Depends on KVM_CAP_ARM_PMU_V3.
 
+	- KVM_ARM_VCPU_SVE: Enables SVE for the CPU (arm64 only).
+	  Depends on KVM_CAP_ARM_SVE.
+	  Requires KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE):
+
+	   * After KVM_ARM_VCPU_INIT:
+
+	      - KVM_REG_ARM64_SVE_VLS may be read using KVM_GET_ONE_REG: the
+	        initial value of this pseudo-register indicates the best set of
+	        vector lengths possible for a vcpu on this host.
+
+	   * Before KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE):
+
+	      - KVM_RUN and KVM_GET_REG_LIST are not available;
+
+	      - KVM_GET_ONE_REG and KVM_SET_ONE_REG cannot be used to access
+	        the scalable archietctural SVE registers
+	        KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() or
+	        KVM_REG_ARM64_SVE_FFR;
+
+	      - KVM_REG_ARM64_SVE_VLS may optionally be written using
+	        KVM_SET_ONE_REG, to modify the set of vector lengths available
+	        for the vcpu.
+
+	   * After KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE):
+
+	      - the KVM_REG_ARM64_SVE_VLS pseudo-register is immutable, and can
+	        no longer be written using KVM_SET_ONE_REG.
 
 4.83 KVM_ARM_PREFERRED_TARGET
 
@@ -3904,6 +3995,41 @@ number of valid entries in the 'entries' array, which is then filled.
 'index' and 'flags' fields in 'struct kvm_cpuid_entry2' are currently reserved,
 userspace should not expect to get any particular value there.
 
+4.119 KVM_ARM_VCPU_FINALIZE
+
+Capability: KVM_CAP_ARM_SVE
+Architectures: arm, arm64
+Type: vcpu ioctl
+Parameters: int feature (in)
+Returns: 0 on success, -1 on error
+Errors:
+  EPERM:     feature not enabled, needs configuration, or already finalized
+  EINVAL:    unknown feature
+
+Recognised values for feature:
+  arm64      KVM_ARM_VCPU_SVE
+
+Finalizes the configuration of the specified vcpu feature.
+
+The vcpu must already have been initialised, enabling the affected feature, by
+means of a successful KVM_ARM_VCPU_INIT call with the appropriate flag set in
+features[].
+
+For affected vcpu features, this is a mandatory step that must be performed
+before the vcpu is fully usable.
+
+Between KVM_ARM_VCPU_INIT and KVM_ARM_VCPU_FINALIZE, the feature may be
+configured by use of ioctls such as KVM_SET_ONE_REG.  The exact configuration
+that should be performaned and how to do it are feature-dependent.
+
+Other calls that depend on a particular feature being finalized, such as
+KVM_RUN, KVM_GET_REG_LIST, KVM_GET_ONE_REG and KVM_SET_ONE_REG, will fail with
+-EPERM unless the feature has already been finalized by means of a
+KVM_ARM_VCPU_FINALIZE call.
+
+See KVM_ARM_VCPU_INIT for details of vcpu features that require finalization
+using this ioctl.
+
 5. The kvm_run structure
 ------------------------
 
-- 
2.1.4

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

WARNING: multiple messages have this Message-ID (diff)
From: Dave Martin <Dave.Martin@arm.com>
To: kvmarm@lists.cs.columbia.edu
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Okamoto Takayuki" <tokamoto@jp.fujitsu.com>,
	"Christoffer Dall" <cdall@kernel.org>,
	"Ard Biesheuvel" <ard.biesheuvel@linaro.org>,
	"Marc Zyngier" <marc.zyngier@arm.com>,
	"Catalin Marinas" <catalin.marinas@arm.com>,
	"Will Deacon" <will.deacon@arm.com>,
	"Zhang Lei" <zhang.lei@jp.fujitsu.com>,
	"Julien Grall" <julien.grall@arm.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 27/27] KVM: arm64/sve: Document KVM API extensions for SVE
Date: Tue, 19 Mar 2019 17:52:18 +0000	[thread overview]
Message-ID: <1553017938-710-28-git-send-email-Dave.Martin@arm.com> (raw)
In-Reply-To: <1553017938-710-1-git-send-email-Dave.Martin@arm.com>

This patch adds sections to the KVM API documentation describing
the extensions for supporting the Scalable Vector Extension (SVE)
in guests.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>

---

Changes since v5:

 * Document KVM_ARM_VCPU_FINALIZE and its interactions with SVE.
---
 Documentation/virtual/kvm/api.txt | 132 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 129 insertions(+), 3 deletions(-)

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index cd920dd..68509de 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1873,6 +1873,7 @@ Parameters: struct kvm_one_reg (in)
 Returns: 0 on success, negative value on failure
 Errors:
   ENOENT:   no such register
+  EPERM:    register access forbidden for architecture-dependent reasons
   EINVAL:   other errors, such as bad size encoding for a known register
 
 struct kvm_one_reg {
@@ -2127,13 +2128,20 @@ Specifically:
   0x6030 0000 0010 004c SPSR_UND    64  spsr[KVM_SPSR_UND]
   0x6030 0000 0010 004e SPSR_IRQ    64  spsr[KVM_SPSR_IRQ]
   0x6060 0000 0010 0050 SPSR_FIQ    64  spsr[KVM_SPSR_FIQ]
-  0x6040 0000 0010 0054 V0         128  fp_regs.vregs[0]
-  0x6040 0000 0010 0058 V1         128  fp_regs.vregs[1]
+  0x6040 0000 0010 0054 V0         128  fp_regs.vregs[0]    (*)
+  0x6040 0000 0010 0058 V1         128  fp_regs.vregs[1]    (*)
     ...
-  0x6040 0000 0010 00d0 V31        128  fp_regs.vregs[31]
+  0x6040 0000 0010 00d0 V31        128  fp_regs.vregs[31]   (*)
   0x6020 0000 0010 00d4 FPSR        32  fp_regs.fpsr
   0x6020 0000 0010 00d5 FPCR        32  fp_regs.fpcr
 
+(*) These encodings are not accepted for SVE-enabled vcpus.  See
+    KVM_ARM_VCPU_INIT.
+
+    The equivalent register content can be accessed via bits [127:0] of
+    the corresponding SVE Zn registers instead for vcpus that have SVE
+    enabled (see below).
+
 arm64 CCSIDR registers are demultiplexed by CSSELR value:
   0x6020 0000 0011 00 <csselr:8>
 
@@ -2143,6 +2151,61 @@ arm64 system registers have the following id bit patterns:
 arm64 firmware pseudo-registers have the following bit pattern:
   0x6030 0000 0014 <regno:16>
 
+arm64 SVE registers have the following bit patterns:
+  0x6080 0000 0015 00 <n:5> <slice:5>   Zn bits[2048*slice + 2047 : 2048*slice]
+  0x6050 0000 0015 04 <n:4> <slice:5>   Pn bits[256*slice + 255 : 256*slice]
+  0x6050 0000 0015 060 <slice:5>        FFR bits[256*slice + 255 : 256*slice]
+  0x6060 0000 0015 ffff                 KVM_REG_ARM64_SVE_VLS pseudo-register
+
+Access to slices beyond the maximum vector length configured for the
+vcpu (i.e., where 16 * slice >= max_vq (**)) will fail with ENOENT.
+
+These registers are only accessible on vcpus for which SVE is enabled.
+See KVM_ARM_VCPU_INIT for details.
+
+In addition, except for KVM_REG_ARM64_SVE_VLS, these registers are not
+accessible until the vcpu's SVE configuration has been finalized
+using KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE).  See KVM_ARM_VCPU_INIT
+and KVM_ARM_VCPU_FINALIZE for more information about this procedure.
+
+KVM_REG_ARM64_SVE_VLS is a pseudo-register that allows the set of vector
+lengths supported by the vcpu to be discovered and configured by
+userspace.  When transferred to or from user memory via KVM_GET_ONE_REG
+or KVM_SET_ONE_REG, the value of this register is of type __u64[8], and
+encodes the set of vector lengths as follows:
+
+__u64 vector_lengths[8];
+
+if (vq >= SVE_VQ_MIN && vq <= SVE_VQ_MAX &&
+    ((vector_lengths[(vq - 1) / 64] >> ((vq - 1) % 64)) & 1))
+	/* Vector length vq * 16 bytes supported */
+else
+	/* Vector length vq * 16 bytes not supported */
+
+(**) The maximum value vq for which the above condition is true is
+max_vq.  This is the maximum vector length available to the guest on
+this vcpu, and determines which register slices are visible through
+this ioctl interface.
+
+(See Documentation/arm64/sve.txt for an explanation of the "vq"
+nomenclature.)
+
+KVM_REG_ARM64_SVE_VLS is only accessible after KVM_ARM_VCPU_INIT.
+KVM_ARM_VCPU_INIT initialises it to the best set of vector lengths that
+the host supports.
+
+Userspace may subsequently modify it if desired until the vcpu's SVE
+configuration is finalized using KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE).
+
+Apart from simply removing all vector lengths from the host set that
+exceed some value, support for arbitrarily chosen sets of vector lengths
+is hardware-dependent and may not be available.  Attempting to configure
+an invalid set of vector lengths via KVM_SET_ONE_REG will fail with
+EINVAL.
+
+After the vcpu's SVE configuration is finalized, further attempts to
+write this register will fail with EPERM.
+
 
 MIPS registers are mapped using the lower 32 bits.  The upper 16 of that is
 the register group type:
@@ -2197,6 +2260,7 @@ Parameters: struct kvm_one_reg (in and out)
 Returns: 0 on success, negative value on failure
 Errors:
   ENOENT:   no such register
+  EPERM:    register access forbidden for architecture-dependent reasons
   EINVAL:   other errors, such as bad size encoding for a known register
 
 This ioctl allows to receive the value of a single register implemented
@@ -2690,6 +2754,33 @@ Possible features:
 	- KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU.
 	  Depends on KVM_CAP_ARM_PMU_V3.
 
+	- KVM_ARM_VCPU_SVE: Enables SVE for the CPU (arm64 only).
+	  Depends on KVM_CAP_ARM_SVE.
+	  Requires KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE):
+
+	   * After KVM_ARM_VCPU_INIT:
+
+	      - KVM_REG_ARM64_SVE_VLS may be read using KVM_GET_ONE_REG: the
+	        initial value of this pseudo-register indicates the best set of
+	        vector lengths possible for a vcpu on this host.
+
+	   * Before KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE):
+
+	      - KVM_RUN and KVM_GET_REG_LIST are not available;
+
+	      - KVM_GET_ONE_REG and KVM_SET_ONE_REG cannot be used to access
+	        the scalable archietctural SVE registers
+	        KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() or
+	        KVM_REG_ARM64_SVE_FFR;
+
+	      - KVM_REG_ARM64_SVE_VLS may optionally be written using
+	        KVM_SET_ONE_REG, to modify the set of vector lengths available
+	        for the vcpu.
+
+	   * After KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE):
+
+	      - the KVM_REG_ARM64_SVE_VLS pseudo-register is immutable, and can
+	        no longer be written using KVM_SET_ONE_REG.
 
 4.83 KVM_ARM_PREFERRED_TARGET
 
@@ -3904,6 +3995,41 @@ number of valid entries in the 'entries' array, which is then filled.
 'index' and 'flags' fields in 'struct kvm_cpuid_entry2' are currently reserved,
 userspace should not expect to get any particular value there.
 
+4.119 KVM_ARM_VCPU_FINALIZE
+
+Capability: KVM_CAP_ARM_SVE
+Architectures: arm, arm64
+Type: vcpu ioctl
+Parameters: int feature (in)
+Returns: 0 on success, -1 on error
+Errors:
+  EPERM:     feature not enabled, needs configuration, or already finalized
+  EINVAL:    unknown feature
+
+Recognised values for feature:
+  arm64      KVM_ARM_VCPU_SVE
+
+Finalizes the configuration of the specified vcpu feature.
+
+The vcpu must already have been initialised, enabling the affected feature, by
+means of a successful KVM_ARM_VCPU_INIT call with the appropriate flag set in
+features[].
+
+For affected vcpu features, this is a mandatory step that must be performed
+before the vcpu is fully usable.
+
+Between KVM_ARM_VCPU_INIT and KVM_ARM_VCPU_FINALIZE, the feature may be
+configured by use of ioctls such as KVM_SET_ONE_REG.  The exact configuration
+that should be performaned and how to do it are feature-dependent.
+
+Other calls that depend on a particular feature being finalized, such as
+KVM_RUN, KVM_GET_REG_LIST, KVM_GET_ONE_REG and KVM_SET_ONE_REG, will fail with
+-EPERM unless the feature has already been finalized by means of a
+KVM_ARM_VCPU_FINALIZE call.
+
+See KVM_ARM_VCPU_INIT for details of vcpu features that require finalization
+using this ioctl.
+
 5. The kvm_run structure
 ------------------------
 
-- 
2.1.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-03-19 17:54 UTC|newest]

Thread overview: 112+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-19 17:51 [PATCH v5 00/26] KVM: arm64: SVE guest support Dave Martin
2019-03-19 17:51 ` Dave Martin
2019-03-19 17:51 ` [PATCH v6 01/27] KVM: Documentation: Document arm64 core registers in detail Dave Martin
2019-03-19 17:51   ` Dave Martin
2019-03-19 17:51 ` [PATCH v6 02/27] arm64: fpsimd: Always set TIF_FOREIGN_FPSTATE on task state flush Dave Martin
2019-03-19 17:51   ` Dave Martin
2019-03-19 17:51 ` [PATCH v6 03/27] KVM: arm64: Delete orphaned declaration for __fpsimd_enabled() Dave Martin
2019-03-19 17:51   ` Dave Martin
2019-03-19 17:51 ` [PATCH v6 04/27] KVM: arm64: Refactor kvm_arm_num_regs() for easier maintenance Dave Martin
2019-03-19 17:51   ` Dave Martin
2019-03-19 17:51 ` [PATCH v6 05/27] KVM: arm64: Add missing #includes to kvm_host.h Dave Martin
2019-03-19 17:51   ` Dave Martin
2019-03-19 17:51 ` [PATCH v6 06/27] arm64/sve: Clarify role of the VQ map maintenance functions Dave Martin
2019-03-19 17:51   ` Dave Martin
2019-03-19 17:51 ` [PATCH v6 07/27] arm64/sve: Check SVE virtualisability Dave Martin
2019-03-19 17:51   ` Dave Martin
2019-03-19 17:51 ` [PATCH v6 08/27] arm64/sve: Enable SVE state tracking for non-task contexts Dave Martin
2019-03-19 17:51   ` Dave Martin
2019-03-19 17:52 ` [PATCH v6 09/27] KVM: arm64: Add a vcpu flag to control SVE visibility for the guest Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-19 17:52 ` [PATCH v6 10/27] KVM: arm64: Propagate vcpu into read_id_reg() Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-19 17:52 ` [PATCH v6 11/27] KVM: arm64: Support runtime sysreg visibility filtering Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-04-02  2:49   ` Amit Daniel Kachhap
2019-04-02  2:49     ` Amit Daniel Kachhap
2019-03-19 17:52 ` [PATCH v6 12/27] KVM: arm64/sve: System register context switch and access support Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-26 13:58   ` Julien Thierry
2019-03-26 13:58     ` Julien Thierry
2019-03-19 17:52 ` [PATCH v6 13/27] KVM: arm64/sve: Context switch the SVE registers Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-27  8:15   ` Julien Thierry
2019-03-27  8:15     ` Julien Thierry
2019-03-19 17:52 ` [PATCH v6 14/27] KVM: Allow 2048-bit register access via ioctl interface Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-19 17:52 ` [PATCH v6 15/27] KVM: arm64: Add missing #include of <linux/string.h> in guest.c Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-19 17:52 ` [PATCH v6 16/27] KVM: arm64: Factor out core register ID enumeration Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-27  8:46   ` Julien Thierry
2019-03-27  8:46     ` Julien Thierry
2019-03-19 17:52 ` [PATCH v6 17/27] KVM: arm64: Reject ioctl access to FPSIMD V-regs on SVE vcpus Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-27  8:46   ` Julien Thierry
2019-03-27  8:46     ` Julien Thierry
2019-03-19 17:52 ` [PATCH v6 18/27] KVM: arm64/sve: Add SVE support to register access ioctl interface Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-27  9:23   ` Julien Thierry
2019-03-27  9:23     ` Julien Thierry
2019-03-19 17:52 ` [PATCH v6 19/27] KVM: arm64: Enumerate SVE register indices for KVM_GET_REG_LIST Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-27  9:47   ` Julien Thierry
2019-03-27  9:47     ` Julien Thierry
2019-03-27 10:33     ` Dave Martin
2019-03-27 10:33       ` Dave Martin
2019-03-27 15:21       ` Julien Thierry
2019-03-27 15:21         ` Julien Thierry
2019-03-28 12:27         ` Dave Martin
2019-03-28 12:27           ` Dave Martin
2019-03-28 14:29           ` Julien Thierry
2019-03-28 14:29             ` Julien Thierry
2019-03-28 16:48             ` Dave Martin
2019-03-28 16:48               ` Dave Martin
2019-03-28 16:59               ` Julien Thierry
2019-03-28 16:59                 ` Julien Thierry
2019-03-19 17:52 ` [PATCH v6 20/27] arm64/sve: In-kernel vector length availability query interface Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-19 17:52 ` [PATCH v6 21/27] KVM: arm/arm64: Add hook for arch-specific KVM initialisation Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-27 10:07   ` Julien Thierry
2019-03-27 10:07     ` Julien Thierry
2019-03-27 10:41     ` Dave Martin
2019-03-27 10:41       ` Dave Martin
2019-03-27 15:23       ` Julien Thierry
2019-03-27 15:23         ` Julien Thierry
2019-03-19 17:52 ` [PATCH v6 22/27] KVM: arm/arm64: Add KVM_ARM_VCPU_FINALIZE ioctl Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-27 14:07   ` Julien Thierry
2019-03-27 14:07     ` Julien Thierry
2019-03-27 17:42     ` Dave Martin
2019-03-27 17:42       ` Dave Martin
2019-03-19 17:52 ` [PATCH v6 23/27] KVM: arm64/sve: Add pseudo-register for the guest's vector lengths Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-27 14:57   ` Julien Thierry
2019-03-27 14:57     ` Julien Thierry
2019-03-19 17:52 ` [PATCH v6 24/27] KVM: arm64/sve: Allow userspace to enable SVE for vcpus Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-27 15:15   ` Julien Thierry
2019-03-27 15:15     ` Julien Thierry
2019-03-19 17:52 ` [PATCH v6 25/27] KVM: arm64: Add a capability to advertise SVE support Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-27 15:16   ` Julien Thierry
2019-03-27 15:16     ` Julien Thierry
2019-03-19 17:52 ` [PATCH v6 26/27] KVM: Document errors for KVM_GET_ONE_REG and KVM_SET_ONE_REG Dave Martin
2019-03-19 17:52   ` Dave Martin
2019-03-19 17:52 ` Dave Martin [this message]
2019-03-19 17:52   ` [PATCH v6 27/27] KVM: arm64/sve: Document KVM API extensions for SVE Dave Martin
2019-03-19 17:58 ` [PATCH v5 00/26] KVM: arm64: SVE guest support Dave Martin
2019-03-19 17:58   ` Dave Martin
2019-03-27  5:51   ` Zhang, Lei
2019-03-27  5:51     ` Zhang, Lei
2019-03-20 12:30 ` Dave Martin
2019-03-20 12:30   ` Dave Martin
2019-03-25 16:32 ` Andrew Jones
2019-03-25 16:32   ` Andrew Jones
2019-03-25 16:38   ` Peter Maydell
2019-03-25 16:38     ` Peter Maydell
2019-03-25 16:49     ` Andrew Jones
2019-03-25 16:49       ` Andrew Jones
2019-03-26 11:28       ` Dave Martin
2019-03-26 11:28         ` Dave Martin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1553017938-710-28-git-send-email-Dave.Martin@arm.com \
    --to=dave.martin@arm.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=cdall@kernel.org \
    --cc=julien.grall@arm.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=tokamoto@jp.fujitsu.com \
    --cc=will.deacon@arm.com \
    --cc=zhang.lei@jp.fujitsu.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.