Re: [PATCH v2 1/6] dt-bindings: connector: add optional properties for Type-B

[Chunfeng Yun <chunfeng.yun@mediatek.com>]

Hi Rob,
On Sun, 2019-03-31 at 01:40 -0500, Rob Herring wrote:
> On Fri, Mar 15, 2019 at 03:38:28PM +0800, Chunfeng Yun wrote:
> > Add id-gpios, vbus-gpios, vbus-supply and pinctrl properties for
> > usb-b-connector
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > v2 changes:
> >   1. describe more clear for vbus-gpios and vbus-supply suggested by Hans
> > ---
> >  .../devicetree/bindings/connector/usb-connector.txt      | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
> > index a9a2f2fc44f2..1c4ed6c9afa8 100644
> > --- a/Documentation/devicetree/bindings/connector/usb-connector.txt
> > +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt
> > @@ -17,6 +17,15 @@ Optional properties:
> >  - self-powered: Set this property if the usb device that has its own power
> >    source.
> >  
> > +Optional properties for usb-b-connector:
> > +- id-gpios: gpio for USB ID pin.
> > +- vbus-gpios: gpio for USB VBUS pin, used to detect presence of VBUS 5V.
> > +  see gpio/gpio.txt.
> 
> Please make it explicit that this is an input gpio. An output GPIO 
> controlling a Vbus regulator should be modelled as a regulator.
Ok, thanks

> 
> > +- vbus-supply: a phandle to the regulator for USB VBUS if needed.
> > +- pinctrl-names : a pinctrl state named "default" is optional
> > +- pinctrl-0 : pin control group
> > +  see pinctrl/pinctrl-bindings.txt
> > +
> >  Optional properties for usb-c-connector:
> >  - power-role: should be one of "source", "sink" or "dual"(DRP) if typec
> >    connector has power support.
> > -- 
> > 2.20.1
> > 
>