[U-Boot] [PATCH v2 3/6] stm32mp1: reset coprocessor status at cold boot

[Fabien Dessenne <fabien.dessenne@st.com>]

Reset ResourceTableAddress and CoprocessorState at cold boot, preserve
these values at standby wakeup.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
---
 arch/arm/mach-stm32mp/cpu.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
index a46e843..e24abf5 100644
--- a/arch/arm/mach-stm32mp/cpu.c
+++ b/arch/arm/mach-stm32mp/cpu.c
@@ -34,7 +34,9 @@
 #define TAMP_CR1		(STM32_TAMP_BASE + 0x00)
 
 #define PWR_CR1			(STM32_PWR_BASE + 0x00)
+#define PWR_MCUCR		(STM32_PWR_BASE + 0x14)
 #define PWR_CR1_DBP		BIT(8)
+#define PWR_MCUCR_SBF		BIT(6)
 
 /* DBGMCU register */
 #define DBGMCU_IDC		(STM32_DBGMCU_BASE + 0x00)
@@ -205,6 +207,11 @@ int arch_cpu_init(void)
 	security_init();
 	update_bootmode();
 #endif
+	/* Reset Coprocessor state unless it wakes up from Standby power mode */
+	if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
+		writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);
+		writel(0, TAMP_COPRO_RSC_TBL_ADDRESS);
+	}
 #endif
 
 	boot_mode = get_bootmode();
-- 
2.7.4