[PATCH V7 1/4] rpmsg: glink: Use complete_all for open states

[PATCH V7 1/4] rpmsg: glink: Use complete_all for open states

[Deepak Kumar Singh]

From: Chris Lew <clew@codeaurora.org>

The open_req and open_ack completion variables are the state variables
to represet a remote channel as open. Use complete_all so there are no
races with waiters and using completion_done.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/qcom_glink_native.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 1995f5b..d5114ab 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -970,7 +970,7 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid)
 		return -EINVAL;
 	}
 
-	complete(&channel->open_ack);
+	complete_all(&channel->open_ack);
 
 	return 0;
 }
@@ -1178,7 +1178,7 @@ static int qcom_glink_announce_create(struct rpmsg_device *rpdev)
 	__be32 *val = defaults;
 	int size;
 
-	if (glink->intentless)
+	if (glink->intentless || !completion_done(&channel->open_ack))
 		return 0;
 
 	prop = of_find_property(np, "qcom,intents", NULL);
@@ -1413,7 +1413,7 @@ static int qcom_glink_rx_open(struct qcom_glink *glink, unsigned int rcid,
 	channel->rcid = ret;
 	spin_unlock_irqrestore(&glink->idr_lock, flags);
 
-	complete(&channel->open_req);
+	complete_all(&channel->open_req);
 
 	if (create_device) {
 		rpdev = kzalloc(sizeof(*rpdev), GFP_KERNEL);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V7 1/4] rpmsg: glink: Use complete_all for open states

[patchwork-bot+linux-remoteproc]

Hello:

This series was applied to andersson/remoteproc.git (refs/heads/for-next).

On Wed, 24 Jun 2020 22:15:18 +0530 you wrote:
> From: Chris Lew <clew@codeaurora.org>
> 
> The open_req and open_ack completion variables are the state variables
> to represet a remote channel as open. Use complete_all so there are no
> races with waiters and using completion_done.
> 
> Signed-off-by: Chris Lew <clew@codeaurora.org>
> Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
> 
> [...]


Here is a summary with links:
  - [V7,1/4] rpmsg: glink: Use complete_all for open states
    https://git.kernel.org/andersson/remoteproc/c/4fcdaf6e28d11e2f3820d54dd23cd12a47ddd44e
  - [V7,2/4] rpmsg: Guard against null endpoint ops in destroy
    https://git.kernel.org/andersson/remoteproc/c/d5158cda9e7b66fd412815df32e58943b7383f0c
  - [V7,3/4] rpmsg: glink: Add support for rpmsg glink chrdev
    https://git.kernel.org/andersson/remoteproc/c/0f579e52472198cec2d3d794a26e277c84e9dbd2
  - [V7,4/4] rpmsg: glink: Expose rpmsg name attr for glink
    https://git.kernel.org/andersson/remoteproc/c/4e3dda0bc603c1ca84680a56bfc49e8fe2519c89

You are awesome, thank you!

-- 
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/pwbot

[PATCH V7 2/4] rpmsg: Guard against null endpoint ops in destroy

[Deepak Kumar Singh]

From: Chris Lew <clew@codeaurora.org>

In RPMSG GLINK the chrdev device will allocate an ept as part of the
rpdev creation. This device will not register endpoint ops even though
it has an allocated ept. Protect against the case where the device is
being destroyed.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/rpmsg_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
index a6361ca..91de940 100644
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -81,7 +81,7 @@ EXPORT_SYMBOL(rpmsg_create_ept);
  */
 void rpmsg_destroy_ept(struct rpmsg_endpoint *ept)
 {
-	if (ept)
+	if (ept && ept->ops)
 		ept->ops->destroy_ept(ept);
 }
 EXPORT_SYMBOL(rpmsg_destroy_ept);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V7 2/4] rpmsg: Guard against null endpoint ops in destroy

[Greg KH]

On Wed, Jun 24, 2020 at 10:15:19PM +0530, Deepak Kumar Singh wrote:
> From: Chris Lew <clew@codeaurora.org>
> 
> In RPMSG GLINK the chrdev device will allocate an ept as part of the
> rpdev creation. This device will not register endpoint ops even though
> it has an allocated ept. Protect against the case where the device is
> being destroyed.
> 
> Signed-off-by: Chris Lew <clew@codeaurora.org>
> Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>

Should this be marked for stable kernels?

And if so, what commit does this fix?  Any reason the Fixes: tag was not
used here?

And what happened to this series?  I don't see it in linux-next, did the
maintainer ignore it?

thanks,

greg k-h

Re: [PATCH V7 2/4] rpmsg: Guard against null endpoint ops in destroy

[Chris Lew]

Hi Greg,

On 8/7/2020 12:59 AM, Greg KH wrote:
> On Wed, Jun 24, 2020 at 10:15:19PM +0530, Deepak Kumar Singh wrote:
>> From: Chris Lew <clew@codeaurora.org>
>>
>> In RPMSG GLINK the chrdev device will allocate an ept as part of the
>> rpdev creation. This device will not register endpoint ops even though
>> it has an allocated ept. Protect against the case where the device is
>> being destroyed.
>>
>> Signed-off-by: Chris Lew <clew@codeaurora.org>
>> Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
>> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
> 
> Should this be marked for stable kernels?
> 
> And if so, what commit does this fix?  Any reason the Fixes: tag was not
> used here?
> 

The crash that this fixes doesn't show up unless one of the previous 
patches in the series is applied.

[PATCH V6 3/5] rpmsg: glink: Add support for rpmsg glink chrdev

I'm not sure if the fixes tag should apply to this change or one of the 
commits to the base rpmsg code.

> And what happened to this series?  I don't see it in linux-next, did the
> maintainer ignore it?
> 

I believe most of the review feedback for the series has been addressed 
by Deepak. There is one remaining action item for me and Deepak to 
provide more concrete evidence that the first patch in the series is 
needed.

[PATCH V6 1/5] rpmsg: glink: Use complete_all for open states

> thanks,
> 
> greg k-h
> 

Thanks,
Chris

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a 
Linux Foundation Collaborative Project

Re: [PATCH V7 2/4] rpmsg: Guard against null endpoint ops in destroy

[Greg KH]

On Fri, Aug 07, 2020 at 05:33:53PM -0700, Chris Lew wrote:
> Hi Greg,
> 
> On 8/7/2020 12:59 AM, Greg KH wrote:
> > On Wed, Jun 24, 2020 at 10:15:19PM +0530, Deepak Kumar Singh wrote:
> > > From: Chris Lew <clew@codeaurora.org>
> > > 
> > > In RPMSG GLINK the chrdev device will allocate an ept as part of the
> > > rpdev creation. This device will not register endpoint ops even though
> > > it has an allocated ept. Protect against the case where the device is
> > > being destroyed.
> > > 
> > > Signed-off-by: Chris Lew <clew@codeaurora.org>
> > > Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
> > > Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
> > 
> > Should this be marked for stable kernels?
> > 
> > And if so, what commit does this fix?  Any reason the Fixes: tag was not
> > used here?
> > 
> 
> The crash that this fixes doesn't show up unless one of the previous patches
> in the series is applied.
> 
> [PATCH V6 3/5] rpmsg: glink: Add support for rpmsg glink chrdev
> 
> I'm not sure if the fixes tag should apply to this change or one of the
> commits to the base rpmsg code.

That's a different series, why not merge this patch with that one so
there is no need for a fix if none of this has been merged yet?

> > And what happened to this series?  I don't see it in linux-next, did the
> > maintainer ignore it?
> > 
> 
> I believe most of the review feedback for the series has been addressed by
> Deepak. There is one remaining action item for me and Deepak to provide more
> concrete evidence that the first patch in the series is needed.
> 
> [PATCH V6 1/5] rpmsg: glink: Use complete_all for open states

Ok, thanks, just didn't want to see this get forgotten...

greg k-h

[PATCH V7 3/4] rpmsg: glink: Add support for rpmsg glink chrdev

[Deepak Kumar Singh]

RPMSG provides a char device interface to userspace. Probe the rpmsg
chrdev channel to enable the rpmsg_ctrl device creation on glink
transports.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/qcom_glink_native.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index d5114ab..3a7f87c 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1574,6 +1574,40 @@ static void qcom_glink_cancel_rx_work(struct qcom_glink *glink)
 		kfree(dcmd);
 }
 
+static void qcom_glink_device_release(struct device *dev)
+{
+	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
+	struct glink_channel *channel = to_glink_channel(rpdev->ept);
+
+	/* Release qcom_glink_alloc_channel() reference */
+	kref_put(&channel->refcount, qcom_glink_channel_release);
+	kfree(rpdev);
+}
+
+static int qcom_glink_create_chrdev(struct qcom_glink *glink)
+{
+	struct rpmsg_device *rpdev;
+	struct glink_channel *channel;
+
+	rpdev = kzalloc(sizeof(*rpdev), GFP_KERNEL);
+	if (!rpdev)
+		return -ENOMEM;
+
+	channel = qcom_glink_alloc_channel(glink, "rpmsg_chrdev");
+	if (IS_ERR(channel)) {
+		kfree(rpdev);
+		return PTR_ERR(channel);
+	}
+	channel->rpdev = rpdev;
+
+	rpdev->ept = &channel->ept;
+	rpdev->ops = &glink_device_ops;
+	rpdev->dev.parent = glink->dev;
+	rpdev->dev.release = qcom_glink_device_release;
+
+	return rpmsg_chrdev_register_device(rpdev);
+}
+
 struct qcom_glink *qcom_glink_native_probe(struct device *dev,
 					   unsigned long features,
 					   struct qcom_glink_pipe *rx,
@@ -1633,6 +1667,10 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
 	if (ret)
 		return ERR_PTR(ret);
 
+	ret = qcom_glink_create_chrdev(glink);
+	if (ret)
+		dev_err(glink->dev, "failed to register chrdev\n");
+
 	return glink;
 }
 EXPORT_SYMBOL_GPL(qcom_glink_native_probe);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH V7 4/4] rpmsg: glink: Expose rpmsg name attr for glink

[Deepak Kumar Singh]

From: Chris Lew <clew@codeaurora.org>

Expose the name field as an attr so clients listening to uevents for
rpmsg can identify the edge the events correspond to.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/qcom_glink_native.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 3a7f87c..0e8a28c0 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1574,6 +1574,26 @@ static void qcom_glink_cancel_rx_work(struct qcom_glink *glink)
 		kfree(dcmd);
 }
 
+static ssize_t rpmsg_name_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	int ret = 0;
+	const char *name;
+
+	ret = of_property_read_string(dev->of_node, "label", &name);
+	if (ret < 0)
+		name = dev->of_node->name;
+
+	return snprintf(buf, RPMSG_NAME_SIZE, "%s\n", name);
+}
+static DEVICE_ATTR_RO(rpmsg_name);
+
+static struct attribute *qcom_glink_attrs[] = {
+	&dev_attr_rpmsg_name.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(qcom_glink);
+
 static void qcom_glink_device_release(struct device *dev)
 {
 	struct rpmsg_device *rpdev = to_rpmsg_device(dev);
@@ -1638,6 +1658,12 @@ struct qcom_glink *qcom_glink_native_probe(struct device *dev,
 	idr_init(&glink->lcids);
 	idr_init(&glink->rcids);
 
+	glink->dev->groups = qcom_glink_groups;
+
+	ret = device_add_groups(dev, qcom_glink_groups);
+	if (ret)
+		dev_err(dev, "failed to add groups\n");
+
 	ret = of_property_read_string(dev->of_node, "label", &glink->name);
 	if (ret < 0)
 		glink->name = dev->of_node->name;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project