From: Ashwin Dayanand Kamat <kashwindayan@vmware.com>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Wen Gong <wgong@codeaurora.org>,
Jouni Malinen <jouni@codeaurora.org>,
Johannes Berg <johannes.berg@intel.com>,
davem@davemloft.net, ath10k@lists.infradead.org,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
akaher@vmware.com, vsirnapalli@vmware.com, tkundu@vmware.com,
namit@vmware.com
Subject: [PATCH v4.19.y] ath10k: Fix TKIP Michael MIC verification for PCIe
Date: Wed, 2 Aug 2023 15:52:13 +0530 [thread overview]
Message-ID: <1690971733-22270-1-git-send-email-kashwindayan@vmware.com> (raw)
From: Wen Gong <wgong@codeaurora.org>
commit 0dc267b13f3a7e8424a898815dd357211b737330 upstream.
TKIP Michael MIC was not verified properly for PCIe cases since the
validation steps in ieee80211_rx_h_michael_mic_verify() in mac80211 did
not get fully executed due to unexpected flag values in
ieee80211_rx_status.
Fix this by setting the flags property to meet mac80211 expectations for
performing Michael MIC validation there. This fixes CVE-2020-26141. It
does the same as ath10k_htt_rx_proc_rx_ind_hl() for SDIO which passed
MIC verification case. This applies only to QCA6174/QCA9377 PCIe.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.c3f1d42c6746.I795593fcaae941c471425b8c7d5f7bb185d29142@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ashwin Dayanand Kamat <kashwindayan@vmware.com>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 0a7551dc0f94..b8bba6d99dba 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1645,6 +1645,11 @@ static void ath10k_htt_rx_h_mpdu(struct ath10k *ar,
skb_queue_walk(amsdu, msdu) {
ath10k_htt_rx_h_csum_offload(msdu);
+
+ if (frag && !fill_crypt_header &&
+ enctype == HTT_RX_MPDU_ENCRYPT_TKIP_WPA)
+ status->flag &= ~RX_FLAG_MMIC_STRIPPED;
+
ath10k_htt_rx_h_undecap(ar, msdu, status, first_hdr, enctype,
is_decrypted);
@@ -1662,6 +1667,11 @@ static void ath10k_htt_rx_h_mpdu(struct ath10k *ar,
hdr = (void *)msdu->data;
hdr->frame_control &= ~__cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+
+ if (frag && !fill_crypt_header &&
+ enctype == HTT_RX_MPDU_ENCRYPT_TKIP_WPA)
+ status->flag &= ~RX_FLAG_IV_STRIPPED &
+ ~RX_FLAG_MMIC_STRIPPED;
}
}
--
2.35.6
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
WARNING: multiple messages have this Message-ID (diff)
From: Ashwin Dayanand Kamat <kashwindayan@vmware.com>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Wen Gong <wgong@codeaurora.org>,
Jouni Malinen <jouni@codeaurora.org>,
Johannes Berg <johannes.berg@intel.com>,
davem@davemloft.net, ath10k@lists.infradead.org,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
akaher@vmware.com, vsirnapalli@vmware.com, tkundu@vmware.com,
namit@vmware.com
Subject: [PATCH v4.19.y] ath10k: Fix TKIP Michael MIC verification for PCIe
Date: Wed, 2 Aug 2023 15:52:13 +0530 [thread overview]
Message-ID: <1690971733-22270-1-git-send-email-kashwindayan@vmware.com> (raw)
From: Wen Gong <wgong@codeaurora.org>
commit 0dc267b13f3a7e8424a898815dd357211b737330 upstream.
TKIP Michael MIC was not verified properly for PCIe cases since the
validation steps in ieee80211_rx_h_michael_mic_verify() in mac80211 did
not get fully executed due to unexpected flag values in
ieee80211_rx_status.
Fix this by setting the flags property to meet mac80211 expectations for
performing Michael MIC validation there. This fixes CVE-2020-26141. It
does the same as ath10k_htt_rx_proc_rx_ind_hl() for SDIO which passed
MIC verification case. This applies only to QCA6174/QCA9377 PCIe.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.c3f1d42c6746.I795593fcaae941c471425b8c7d5f7bb185d29142@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ashwin Dayanand Kamat <kashwindayan@vmware.com>
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 0a7551dc0f94..b8bba6d99dba 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -1645,6 +1645,11 @@ static void ath10k_htt_rx_h_mpdu(struct ath10k *ar,
skb_queue_walk(amsdu, msdu) {
ath10k_htt_rx_h_csum_offload(msdu);
+
+ if (frag && !fill_crypt_header &&
+ enctype == HTT_RX_MPDU_ENCRYPT_TKIP_WPA)
+ status->flag &= ~RX_FLAG_MMIC_STRIPPED;
+
ath10k_htt_rx_h_undecap(ar, msdu, status, first_hdr, enctype,
is_decrypted);
@@ -1662,6 +1667,11 @@ static void ath10k_htt_rx_h_mpdu(struct ath10k *ar,
hdr = (void *)msdu->data;
hdr->frame_control &= ~__cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+
+ if (frag && !fill_crypt_header &&
+ enctype == HTT_RX_MPDU_ENCRYPT_TKIP_WPA)
+ status->flag &= ~RX_FLAG_IV_STRIPPED &
+ ~RX_FLAG_MMIC_STRIPPED;
}
}
--
2.35.6
next reply other threads:[~2023-08-02 10:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-02 10:22 Ashwin Dayanand Kamat [this message]
2023-08-02 10:22 ` [PATCH v4.19.y] ath10k: Fix TKIP Michael MIC verification for PCIe Ashwin Dayanand Kamat
2023-08-04 10:28 ` Greg Kroah-Hartman
2023-08-04 10:28 ` Greg Kroah-Hartman
2023-08-04 10:42 ` Greg Kroah-Hartman
2023-08-04 10:42 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1690971733-22270-1-git-send-email-kashwindayan@vmware.com \
--to=kashwindayan@vmware.com \
--cc=akaher@vmware.com \
--cc=ath10k@lists.infradead.org \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=johannes.berg@intel.com \
--cc=jouni@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=namit@vmware.com \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tkundu@vmware.com \
--cc=vsirnapalli@vmware.com \
--cc=wgong@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.