* [RFC] Palms commits.
@ 2007-07-10 15:45 Sergey Lapin
2007-07-10 18:16 ` Paul Sokolovsky
2007-07-10 21:01 ` Richard Purdie
0 siblings, 2 replies; 7+ messages in thread
From: Sergey Lapin @ 2007-07-10 15:45 UTC (permalink / raw)
To: openembedded-devel
[-- Attachment #1: Type: text/plain, Size: 371 bytes --]
Hi, all!
I just had raging argument with Paul Sokolovsky about my commits,
so I'd like to RFC them, and also I'd like to ask if all these changes
should be passed through RFC.
Please, see attachments. Sorry for post-factum.
Briefly, these commits generalize palms support and make maintenance
easier, also, update Zire 72 configuration.
Thanks a lot,
S.
[-- Attachment #2: mtn.diff --]
[-- Type: text/x-patch, Size: 50906 bytes --]
--- conf/machine/include/palm.conf 66ba46a49721b82b7690b3214c3a2d5451076c5b
+++ conf/machine/include/palm.conf 67ba46a49721b82b7690b3214c3a2d5451076c5b
@@ -0,0 +1,89 @@
+#
+# Hardware-based properties
+#
+
+TARGET_ARCH = "arm"
+PACKAGE_EXTRA_ARCHS = "arm armv4t armv5te"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+GUI_MACHINE_CLASS = "bigscreen"
+
+# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
+require conf/machine/include/tune-xscale.conf
+
+MACHINE_FEATURES = "kernel26 touchscreen apm alsa bluetooth irda usbgadget screen ext2"
+
+#
+# Software/packages selection
+#
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
+
+module_autoload_sa1100-rtc = "sa1100-rtc"
+module_autoload_snd-ac97-bus = "snd-ac97-bus"
+module_autoload_apm_power = "apm_power"
+module_autoload_backlight = "backlight"
+module_autoload_battery = "battery"
+module_autoload_bcm2035_uart = "bcm2035_uart"
+module_autoload_gpioed = "gpioed"
+module_autoload_gpioed-ng = "gpioed-ng"
+module_autoload_lcd = "lcd"
+module_autoload_led-class = "led-class"
+module_autoload_leds-palmld = "leds-palmld"
+module_autoload_ledtrig-heartbeat = "ledtrig-heartbeat"
+module_autoload_ledtrig-hwtimer = "ledtrig-hwtimer"
+module_autoload_ledtrig-timer = "ledtrig-timer"
+module_autoload_palmld_battery = "palmld-battery"
+module_autoload_palmld_ide = "palmld-ide"
+module_autoload_palmld_pcmcia = "palmld-pcmcia"
+module_autoload_pcmcia = "pcmcia"
+module_autoload_pcmcia_core = "pcmcia-core"
+module_autoload_pda_power = "pda_power"
+module_autoload_pxa2xx_core = "pxa2xx-core"
+module_autoload_pxapwm_bl = "pxapwm_bl"
+module_autoload_snd = "snd"
+module_autoload_snd-ac97-codec = "snd-ac97-codec"
+module_autoload_snd-mixer-oss = "snd-mixer-oss"
+module_autoload_snd-page-alloc = "snd-page-alloc"
+module_autoload_snd-pcm = "snd-pcm"
+module_autoload_snd-pcm-oss = "snd-pcm-oss"
+module_autoload_snd-pxa2xx-pcm = "snd-pxa2xx-pcm"
+module_autoload_snd-pxa2xx-ac97 = "snd-pxa2xx-ac97"
+module_autoload_snd-seq = "snd-seq"
+module_autoload_snd-seq-device = "snd-seq-device"
+module_autoload_seq-midi-event = "seq-midi-event"
+module_autoload_snd-seq-oss = "snd-seq-oss"
+module_autoload_snd-timer = "snd-timer"
+module_autoload_soundcore = "soundcore"
+module_autoload_wm97xx-ts = "wm97xx-ts"
+module_autoload_pxa27x-keyboard = "pxa27x-keyboard"
+module_autoload_palmtx-battery = "palmtx-battery"
+module_autoload_palmz72_battery = "palmz72_battery"
+module_autoload_i2c-dev = "i2c-dev"
+module_autoload_i2c-pxa = "i2c-pxa"
+
+
+MACHINE_EXTRA_RRECOMMENDS = "\
+ kernel-module-ac97-bus \
+ kernel-module-apm-power \
+ kernel-module-backlight \
+ kernel-module-battery \
+ kernel-module-led-class \
+ kernel-module-lcd \
+ kernel-module-gpioed \
+ kernel-module-gpioed-ng \
+ kernel-module-external-power \
+ kernel-module-snd \
+ kernel-module-snd-ac97-codec \
+ kernel-module-snd-page-alloc \
+ kernel-module-snd-pcm \
+ kernel-module-snd-seq \
+ kernel-module-snd-seq-device \
+ kernel-module-snd-seq-midi-event \
+ kernel-module-snd-seq-oss \
+ kernel-module-snd-timer \
+ kernel-module-soundcore \
+ "
============================================================
--- conf/machine/palmld.conf 35967f1aae7db5a316327dcc9e656a7fd33fb278
+++ conf/machine/palmld.conf 5733d4803a281832c68a5a1ff2eb4ead15b8fbba
@@ -1,44 +1,16 @@
#@TYPE: Machine
#@NAME: Palm LifeDrive
#@DESCRIPTION: Machine configuration for the Palm LifeDrive
-#
-# Hardware-based properties
-#
+require conf/machine/include/palm.conf
-TARGET_ARCH = "arm"
-PACKAGE_EXTRA_ARCHS = "arm armv4t armv5te"
-
ROOT_FLASH_SIZE = "100"
-SERIAL_CONSOLE = "115200 ttyS0"
+MACHINE_FEATURES += "pcmcia wifi"
-GUI_MACHINE_CLASS = "bigscreen"
-# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
-require conf/machine/include/tune-xscale.conf
-
-MACHINE_FEATURES = "kernel26 touchscreen apm alsa bluetooth pcmcia irda wifi ext2 usbgadget screen"
-
-#
-# Software/packages selection
-#
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
-
-MACHINE_EXTRA_RRECOMMENDS = "\
- kernel-module-ac97-bus \
- kernel-module-apm-power \
- kernel-module-backlight \
- kernel-module-battery \
+MACHINE_EXTRA_RRECOMMENDS += "\
kernel-module-bcm2035-uart \
- kernel-module-external-power \
- kernel-module-gpioed \
- kernel-module-gpioed-ng \
- kernel-module-lcd \
- kernel-module-led-class \
kernel-module-leds-palmld \
kernel-module-ledtrig-heartbeat \
kernel-module-ledtrig-hwtimer \
@@ -50,18 +22,8 @@ MACHINE_EXTRA_RRECOMMENDS = "\
kernel-module-pda-power \
kernel-module-pxa2xx-core \
kernel-module-pxapwm-bl \
- kernel-module-snd \
- kernel-module-snd-ac97-codec \
- kernel-module-snd-page-alloc \
- kernel-module-snd-pcm \
kernel-module-snd-pxa2xx-ac97 \
kernel-module-snd-pxa2xx-pcm \
- kernel-module-snd-seq \
- kernel-module-snd-seq-device \
- kernel-module-snd-seq-midi-event \
- kernel-module-snd-seq-oss \
- kernel-module-snd-timer \
- kernel-module-soundcore \
kernel-module-wm97xx-ts \
"
@@ -71,39 +33,3 @@ module_conf_wm97xx-ts = "options wm97xx-
module_conf_wm97xx-ts = "options wm97xx-ts pil=2"
-module_autoload_snd-ac97-bus = "snd-ac97-bus"
-module_autoload_apm_power = "apm_power"
-module_autoload_backlight = "backlight"
-module_autoload_battery = "battery"
-module_autoload_bcm2035_uart = "bcm2035_uart"
-module_autoload_gpioed = "gpioed"
-module_autoload_gpioed-ng = "gpioed-ng"
-module_autoload_lcd = "lcd"
-module_autoload_led-class = "led-class"
-module_autoload_leds-palmld = "leds-palmld"
-module_autoload_ledtrig-heartbeat = "ledtrig-heartbeat"
-module_autoload_ledtrig-hwtimer = "ledtrig-hwtimer"
-module_autoload_ledtrig-timer = "ledtrig-timer"
-module_autoload_palmld_battery = "palmld-battery"
-module_autoload_palmld_ide = "palmld-ide"
-module_autoload_palmld_pcmcia = "palmld-pcmcia"
-module_autoload_pcmcia = "pcmcia"
-module_autoload_pcmcia_core = "pcmcia-core"
-module_autoload_pda_power = "pda_power"
-module_autoload_pxa2xx_core = "pxa2xx-core"
-module_autoload_pxapwm_bl = "pxapwm_bl"
-module_autoload_snd = "snd"
-module_autoload_snd-ac97-codec = "snd-ac97-codec"
-module_autoload_snd-mixer-oss = "snd-mixer-oss"
-module_autoload_snd-page-alloc = "snd-page-alloc"
-module_autoload_snd-pcm = "snd-pcm"
-module_autoload_snd-pcm-oss = "snd-pcm-oss"
-module_autoload_snd-pxa2xx-pcm = "snd-pxa2xx-pcm"
-module_autoload_snd-pxa2xx-ac97 = "snd-pxa2xx-ac97"
-module_autoload_snd-seq = "snd-seq"
-module_autoload_snd-seq-device = "snd-seq-device"
-module_autoload_seq-midi-event = "seq-midi-event"
-module_autoload_snd-seq-oss = "snd-seq-oss"
-module_autoload_snd-timer = "snd-timer"
-module_autoload_soundcore = "soundcore"
-module_autoload_wm97xx-ts = "wm97xx-ts"
============================================================
--- conf/machine/palmtt3.conf 8eb9d7e7f6949204fa8741d734439d4c836f99e1
+++ conf/machine/palmtt3.conf 15cbbe4d9939a58685fb5359794329dd50b69f91
@@ -1,26 +1,9 @@
#@TYPE: Machine
#@NAME: Palm Tungsten|T3
#@DESCRIPTION: Machine configuration for the Palm Tungsten|T3
-TARGET_ARCH = "arm"
-PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+require conf/machine/include/palm.conf
-PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
-PREFERRED_PROVIDER_linux = "linux-hackndev-2.6"
-PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
-#SRCDATE_linux-hackndev-2.6 = "20070217"
-
-MACHINE_FEATURES = "kernel26 touchscreen apm alsa irda bluetooth ext2 usbgadget screen"
-
ROOT_FLASH_SIZE = "100"
SERIAL_CONSOLE = "115200 ttyS3"
-
-GUI_MACHINE_CLASS = "bigscreen"
-
-# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
-require conf/machine/include/tune-xscale.conf
-
-module_autoload_sa1100-rtc = "sa1100-rtc"
-
-#EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --squash --eraseblock=0x10000 -n"
============================================================
--- conf/machine/palmtx.conf 60acb514b53dbef8a4ff57caa014edbde0c28384
+++ conf/machine/palmtx.conf 62107e3db846dc2f8067bbca79d8050d6ccb4e4c
@@ -1,32 +1,18 @@
#@TYPE: Machine
#@NAME: Palm TX
#@DESCRIPTION: Machine configuration for the Palm TX
-TARGET_ARCH = "arm"
-PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+require conf/machine/include/palm.conf
-PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
+MACHINE_FEATURES += "pcmcia wifi"
-PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
-
-MACHINE_FEATURES = "kernel26 touchscreen apm alsa pcmcia irda bluetooth wifi ext2 usbgadget screen"
-
ROOT_FLASH_SIZE = "100"
SERIAL_CONSOLE = "115200 ttyS0"
GUI_MACHINE_CLASS = "bigscreen"
-# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
-require conf/machine/include/tune-xscale.conf
-
MACHINE_EXTRA_RRECOMMENDS += "kernel-module-pxa27x-keyboard \
kernel-module-pxapwm-bl \
kernel-module-wm97xx-ts \
kernel-module-palmtx-battery"
-
-module_autoload_sa1100-rtc = "sa1100-rtc"
-module_autoload_pxa27x-keyboard = "pxa27x-keyboard"
-module_autoload_pxapwm-bl = "pxapwm-bl"
-module_autoload_wm97xx-ts = "wm97xx-ts"
-module_autoload_palmtx-battery = "palmtx-battery"
============================================================
--- conf/machine/palmz72.conf 2643dcd48c5ef8d7db0dafebc412aac90abf7a6a
+++ conf/machine/palmz72.conf ba207859b5c17a96fc5a1ab6c25d178e8f9159fc
@@ -1,16 +1,9 @@
#@TYPE: Machine
#@NAME: Palm Zire 72
#@DESCRIPTION: Machine configuration for the Palm Zire 72
-TARGET_ARCH = "arm"
-PACKAGE_EXTRA_ARCHS = "arm armv4t armv5te"
+require conf/machine/include/palm.conf
-PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
-
-MACHINE_FEATURES = "kernel26 touchscreen apm alsa pcmcia irda ext2 usbgadget screen"
-
ROOT_FLASH_SIZE = "100"
SERIAL_CONSOLE = "115200 ttyS0"
@@ -18,18 +11,13 @@ GUI_MACHINE_CLASS = "bigscreen"
GUI_MACHINE_CLASS = "bigscreen"
# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
-require conf/machine/include/tune-xscale.conf
require conf/machine/include/tune-thumb.conf
-MACHINE_EXTRA_RRECOMMENDS = "kernel-module-i2c-pxa \
+MACHINE_EXTRA_RRECOMMENDS += "kernel-module-i2c-pxa \
kernel-module-i2c-core \
kernel-module-i2c-algo-pxa \
kernel-module-i2c-dev \
kernel-module-palmz72-battery"
-module_autoload_sa1100-rtc = "sa1100-rtc"
-module_autoload_palmz72_battery = "palmz72_battery"
-module_autoload_i2c-dev = "i2c-dev"
-module_autoload_i2c-pxa = "i2c-pxa"
module_autoload_g_ether = "g_ether"
-----------------------------------------------------------------
Revision: 25a1b52e92703197872289b2993d3a00ab8ef3a3
Ancestor: bfc292511191a1c641abb3c79b523c4c95e33a03
Author: slapin@openembedded.org
Date: 2007-07-10T14:17:27
Branch: org.openembedded.dev
Added files:
conf/machine/include/palm.conf
Modified files:
conf/machine/palmld.conf conf/machine/palmtt3.conf
conf/machine/palmtx.conf conf/machine/palmz72.conf
ChangeLog:
Palms: unification of configs
============================================================
--- conf/machine/include/palm.conf 67ba46a49721b82b7690b3214c3a2d5451076c5b
+++ conf/machine/include/palm.conf 67ba46a49721b82b7690b3214c3a2d5451076c5b
@@ -0,0 +1,89 @@
+#
+# Hardware-based properties
+#
+
+TARGET_ARCH = "arm"
+PACKAGE_EXTRA_ARCHS = "arm armv4t armv5te"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+GUI_MACHINE_CLASS = "bigscreen"
+
+# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
+require conf/machine/include/tune-xscale.conf
+
+MACHINE_FEATURES = "kernel26 touchscreen apm alsa bluetooth irda usbgadget screen ext2"
+
+#
+# Software/packages selection
+#
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
+
+module_autoload_sa1100-rtc = "sa1100-rtc"
+module_autoload_snd-ac97-bus = "snd-ac97-bus"
+module_autoload_apm_power = "apm_power"
+module_autoload_backlight = "backlight"
+module_autoload_battery = "battery"
+module_autoload_bcm2035_uart = "bcm2035_uart"
+module_autoload_gpioed = "gpioed"
+module_autoload_gpioed-ng = "gpioed-ng"
+module_autoload_lcd = "lcd"
+module_autoload_led-class = "led-class"
+module_autoload_leds-palmld = "leds-palmld"
+module_autoload_ledtrig-heartbeat = "ledtrig-heartbeat"
+module_autoload_ledtrig-hwtimer = "ledtrig-hwtimer"
+module_autoload_ledtrig-timer = "ledtrig-timer"
+module_autoload_palmld_battery = "palmld-battery"
+module_autoload_palmld_ide = "palmld-ide"
+module_autoload_palmld_pcmcia = "palmld-pcmcia"
+module_autoload_pcmcia = "pcmcia"
+module_autoload_pcmcia_core = "pcmcia-core"
+module_autoload_pda_power = "pda_power"
+module_autoload_pxa2xx_core = "pxa2xx-core"
+module_autoload_pxapwm_bl = "pxapwm_bl"
+module_autoload_snd = "snd"
+module_autoload_snd-ac97-codec = "snd-ac97-codec"
+module_autoload_snd-mixer-oss = "snd-mixer-oss"
+module_autoload_snd-page-alloc = "snd-page-alloc"
+module_autoload_snd-pcm = "snd-pcm"
+module_autoload_snd-pcm-oss = "snd-pcm-oss"
+module_autoload_snd-pxa2xx-pcm = "snd-pxa2xx-pcm"
+module_autoload_snd-pxa2xx-ac97 = "snd-pxa2xx-ac97"
+module_autoload_snd-seq = "snd-seq"
+module_autoload_snd-seq-device = "snd-seq-device"
+module_autoload_seq-midi-event = "seq-midi-event"
+module_autoload_snd-seq-oss = "snd-seq-oss"
+module_autoload_snd-timer = "snd-timer"
+module_autoload_soundcore = "soundcore"
+module_autoload_wm97xx-ts = "wm97xx-ts"
+module_autoload_pxa27x-keyboard = "pxa27x-keyboard"
+module_autoload_palmtx-battery = "palmtx-battery"
+module_autoload_palmz72_battery = "palmz72_battery"
+module_autoload_i2c-dev = "i2c-dev"
+module_autoload_i2c-pxa = "i2c-pxa"
+
+
+MACHINE_EXTRA_RRECOMMENDS = "\
+ kernel-module-ac97-bus \
+ kernel-module-apm-power \
+ kernel-module-backlight \
+ kernel-module-battery \
+ kernel-module-led-class \
+ kernel-module-lcd \
+ kernel-module-gpioed \
+ kernel-module-gpioed-ng \
+ kernel-module-external-power \
+ kernel-module-snd \
+ kernel-module-snd-ac97-codec \
+ kernel-module-snd-page-alloc \
+ kernel-module-snd-pcm \
+ kernel-module-snd-seq \
+ kernel-module-snd-seq-device \
+ kernel-module-snd-seq-midi-event \
+ kernel-module-snd-seq-oss \
+ kernel-module-snd-timer \
+ kernel-module-soundcore \
+ "
============================================================
--- conf/machine/palmld.conf 35967f1aae7db5a316327dcc9e656a7fd33fb278
+++ conf/machine/palmld.conf 5733d4803a281832c68a5a1ff2eb4ead15b8fbba
@@ -1,44 +1,16 @@
#@TYPE: Machine
#@NAME: Palm LifeDrive
#@DESCRIPTION: Machine configuration for the Palm LifeDrive
-#
-# Hardware-based properties
-#
+require conf/machine/include/palm.conf
-TARGET_ARCH = "arm"
-PACKAGE_EXTRA_ARCHS = "arm armv4t armv5te"
-
ROOT_FLASH_SIZE = "100"
-SERIAL_CONSOLE = "115200 ttyS0"
+MACHINE_FEATURES += "pcmcia wifi"
-GUI_MACHINE_CLASS = "bigscreen"
-# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
-require conf/machine/include/tune-xscale.conf
-
-MACHINE_FEATURES = "kernel26 touchscreen apm alsa bluetooth pcmcia irda wifi ext2 usbgadget screen"
-
-#
-# Software/packages selection
-#
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
-
-MACHINE_EXTRA_RRECOMMENDS = "\
- kernel-module-ac97-bus \
- kernel-module-apm-power \
- kernel-module-backlight \
- kernel-module-battery \
+MACHINE_EXTRA_RRECOMMENDS += "\
kernel-module-bcm2035-uart \
- kernel-module-external-power \
- kernel-module-gpioed \
- kernel-module-gpioed-ng \
- kernel-module-lcd \
- kernel-module-led-class \
kernel-module-leds-palmld \
kernel-module-ledtrig-heartbeat \
kernel-module-ledtrig-hwtimer \
@@ -50,18 +22,8 @@ MACHINE_EXTRA_RRECOMMENDS = "\
kernel-module-pda-power \
kernel-module-pxa2xx-core \
kernel-module-pxapwm-bl \
- kernel-module-snd \
- kernel-module-snd-ac97-codec \
- kernel-module-snd-page-alloc \
- kernel-module-snd-pcm \
kernel-module-snd-pxa2xx-ac97 \
kernel-module-snd-pxa2xx-pcm \
- kernel-module-snd-seq \
- kernel-module-snd-seq-device \
- kernel-module-snd-seq-midi-event \
- kernel-module-snd-seq-oss \
- kernel-module-snd-timer \
- kernel-module-soundcore \
kernel-module-wm97xx-ts \
"
@@ -71,39 +33,3 @@ module_conf_wm97xx-ts = "options wm97xx-
module_conf_wm97xx-ts = "options wm97xx-ts pil=2"
-module_autoload_snd-ac97-bus = "snd-ac97-bus"
-module_autoload_apm_power = "apm_power"
-module_autoload_backlight = "backlight"
-module_autoload_battery = "battery"
-module_autoload_bcm2035_uart = "bcm2035_uart"
-module_autoload_gpioed = "gpioed"
-module_autoload_gpioed-ng = "gpioed-ng"
-module_autoload_lcd = "lcd"
-module_autoload_led-class = "led-class"
-module_autoload_leds-palmld = "leds-palmld"
-module_autoload_ledtrig-heartbeat = "ledtrig-heartbeat"
-module_autoload_ledtrig-hwtimer = "ledtrig-hwtimer"
-module_autoload_ledtrig-timer = "ledtrig-timer"
-module_autoload_palmld_battery = "palmld-battery"
-module_autoload_palmld_ide = "palmld-ide"
-module_autoload_palmld_pcmcia = "palmld-pcmcia"
-module_autoload_pcmcia = "pcmcia"
-module_autoload_pcmcia_core = "pcmcia-core"
-module_autoload_pda_power = "pda_power"
-module_autoload_pxa2xx_core = "pxa2xx-core"
-module_autoload_pxapwm_bl = "pxapwm_bl"
-module_autoload_snd = "snd"
-module_autoload_snd-ac97-codec = "snd-ac97-codec"
-module_autoload_snd-mixer-oss = "snd-mixer-oss"
-module_autoload_snd-page-alloc = "snd-page-alloc"
-module_autoload_snd-pcm = "snd-pcm"
-module_autoload_snd-pcm-oss = "snd-pcm-oss"
-module_autoload_snd-pxa2xx-pcm = "snd-pxa2xx-pcm"
-module_autoload_snd-pxa2xx-ac97 = "snd-pxa2xx-ac97"
-module_autoload_snd-seq = "snd-seq"
-module_autoload_snd-seq-device = "snd-seq-device"
-module_autoload_seq-midi-event = "seq-midi-event"
-module_autoload_snd-seq-oss = "snd-seq-oss"
-module_autoload_snd-timer = "snd-timer"
-module_autoload_soundcore = "soundcore"
-module_autoload_wm97xx-ts = "wm97xx-ts"
============================================================
--- conf/machine/palmtt3.conf 8eb9d7e7f6949204fa8741d734439d4c836f99e1
+++ conf/machine/palmtt3.conf 15cbbe4d9939a58685fb5359794329dd50b69f91
@@ -1,26 +1,9 @@
#@TYPE: Machine
#@NAME: Palm Tungsten|T3
#@DESCRIPTION: Machine configuration for the Palm Tungsten|T3
-TARGET_ARCH = "arm"
-PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+require conf/machine/include/palm.conf
-PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
-PREFERRED_PROVIDER_linux = "linux-hackndev-2.6"
-PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
-#SRCDATE_linux-hackndev-2.6 = "20070217"
-
-MACHINE_FEATURES = "kernel26 touchscreen apm alsa irda bluetooth ext2 usbgadget screen"
-
ROOT_FLASH_SIZE = "100"
SERIAL_CONSOLE = "115200 ttyS3"
-
-GUI_MACHINE_CLASS = "bigscreen"
-
-# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
-require conf/machine/include/tune-xscale.conf
-
-module_autoload_sa1100-rtc = "sa1100-rtc"
-
-#EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --squash --eraseblock=0x10000 -n"
============================================================
--- conf/machine/palmtx.conf 60acb514b53dbef8a4ff57caa014edbde0c28384
+++ conf/machine/palmtx.conf 62107e3db846dc2f8067bbca79d8050d6ccb4e4c
@@ -1,32 +1,18 @@
#@TYPE: Machine
#@NAME: Palm TX
#@DESCRIPTION: Machine configuration for the Palm TX
-TARGET_ARCH = "arm"
-PACKAGE_EXTRA_ARCHS = "armv4t armv5te"
+require conf/machine/include/palm.conf
-PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
+MACHINE_FEATURES += "pcmcia wifi"
-PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
-
-MACHINE_FEATURES = "kernel26 touchscreen apm alsa pcmcia irda bluetooth wifi ext2 usbgadget screen"
-
ROOT_FLASH_SIZE = "100"
SERIAL_CONSOLE = "115200 ttyS0"
GUI_MACHINE_CLASS = "bigscreen"
-# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
-require conf/machine/include/tune-xscale.conf
-
MACHINE_EXTRA_RRECOMMENDS += "kernel-module-pxa27x-keyboard \
kernel-module-pxapwm-bl \
kernel-module-wm97xx-ts \
kernel-module-palmtx-battery"
-
-module_autoload_sa1100-rtc = "sa1100-rtc"
-module_autoload_pxa27x-keyboard = "pxa27x-keyboard"
-module_autoload_pxapwm-bl = "pxapwm-bl"
-module_autoload_wm97xx-ts = "wm97xx-ts"
-module_autoload_palmtx-battery = "palmtx-battery"
============================================================
--- conf/machine/palmz72.conf 2643dcd48c5ef8d7db0dafebc412aac90abf7a6a
+++ conf/machine/palmz72.conf ba207859b5c17a96fc5a1ab6c25d178e8f9159fc
@@ -1,16 +1,9 @@
#@TYPE: Machine
#@NAME: Palm Zire 72
#@DESCRIPTION: Machine configuration for the Palm Zire 72
-TARGET_ARCH = "arm"
-PACKAGE_EXTRA_ARCHS = "arm armv4t armv5te"
+require conf/machine/include/palm.conf
-PREFERRED_PROVIDER_virtual/kernel = "linux-hackndev-2.6"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive"
-
-MACHINE_FEATURES = "kernel26 touchscreen apm alsa pcmcia irda ext2 usbgadget screen"
-
ROOT_FLASH_SIZE = "100"
SERIAL_CONSOLE = "115200 ttyS0"
@@ -18,18 +11,13 @@ GUI_MACHINE_CLASS = "bigscreen"
GUI_MACHINE_CLASS = "bigscreen"
# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
-require conf/machine/include/tune-xscale.conf
require conf/machine/include/tune-thumb.conf
-MACHINE_EXTRA_RRECOMMENDS = "kernel-module-i2c-pxa \
+MACHINE_EXTRA_RRECOMMENDS += "kernel-module-i2c-pxa \
kernel-module-i2c-core \
kernel-module-i2c-algo-pxa \
kernel-module-i2c-dev \
kernel-module-palmz72-battery"
-module_autoload_sa1100-rtc = "sa1100-rtc"
-module_autoload_palmz72_battery = "palmz72_battery"
-module_autoload_i2c-dev = "i2c-dev"
-module_autoload_i2c-pxa = "i2c-pxa"
module_autoload_g_ether = "g_ether"
-----------------------------------------------------------------
Revision: ca473f8f4557686af000ab99a82bdc54b4f46daf
Ancestor: 7b8102831f8d5a1d61f9689b91fee36996dba733
Author: slapin@openembedded.org
Date: 2007-07-09T17:31:12
Branch: org.openembedded.dev
Modified files:
packages/linux/linux-hackndev-2.6_svn.bb
ChangeLog:
linux-hackndev-2.6: bump PR
============================================================
--- packages/linux/linux-hackndev-2.6_svn.bb 98b0ad7705650196802daa4da3d54d58720ba83a
+++ packages/linux/linux-hackndev-2.6_svn.bb 26f695138f79aa36b6295fed70133ebbe8bb094d
@@ -1,8 +1,8 @@ LICENSE = "GPL"
DESCRIPTION = "Hack&Dev's Linux kernel for Palm devices."
HOMEPAGE = "http://www.hackndev.com/"
SECTION = "kernel"
LICENSE = "GPL"
-PR = "r4"
+PR = "r5"
COMPATIBLE_MACHINE = "(palmtt3|palmtx|palmld|palmz72)"
-----------------------------------------------------------------
Revision: 7b8102831f8d5a1d61f9689b91fee36996dba733
Ancestor: 74656ac1048aa37b8f218a08f83d8b97eea49265
Author: slapin@openembedded.org
Date: 2007-07-09T17:26:52
Branch: org.openembedded.dev
Modified files:
conf/machine/palmz72.conf
ChangeLog:
Fixed Palm Zire 72 battery autoload
============================================================
--- conf/machine/palmz72.conf 3113448dd6fbb21aea01d271f1d3d71f5d91501a
+++ conf/machine/palmz72.conf 2643dcd48c5ef8d7db0dafebc412aac90abf7a6a
@@ -28,7 +28,7 @@ module_autoload_sa1100-rtc = "sa1100-rtc
kernel-module-palmz72-battery"
module_autoload_sa1100-rtc = "sa1100-rtc"
-module_autoload_palmz72-battery = "palmz72-battery"
+module_autoload_palmz72_battery = "palmz72_battery"
module_autoload_i2c-dev = "i2c-dev"
module_autoload_i2c-pxa = "i2c-pxa"
module_autoload_g_ether = "g_ether"
-----------------------------------------------------------------
Revision: 74656ac1048aa37b8f218a08f83d8b97eea49265
Ancestor: 9f8374bef77a3a2302e7c84f146407a7fdd328c8
Author: slapin@openembedded.org
Date: 2007-07-09T16:12:14
Branch: org.openembedded.dev
Modified files:
conf/machine/palmz72.conf
packages/linux/linux-hackndev-2.6/palmz72/defconfig
ChangeLog:
Palm Zire 72 machine update
============================================================
--- conf/machine/palmz72.conf 27d88e5c63b991f8a04382c4da88440d8fa81a75
+++ conf/machine/palmz72.conf 3113448dd6fbb21aea01d271f1d3d71f5d91501a
@@ -21,5 +21,15 @@ require conf/machine/include/tune-thumb.
require conf/machine/include/tune-xscale.conf
require conf/machine/include/tune-thumb.conf
+MACHINE_EXTRA_RRECOMMENDS = "kernel-module-i2c-pxa \
+ kernel-module-i2c-core \
+ kernel-module-i2c-algo-pxa \
+ kernel-module-i2c-dev \
+ kernel-module-palmz72-battery"
+
module_autoload_sa1100-rtc = "sa1100-rtc"
module_autoload_palmz72-battery = "palmz72-battery"
+module_autoload_i2c-dev = "i2c-dev"
+module_autoload_i2c-pxa = "i2c-pxa"
+module_autoload_g_ether = "g_ether"
+
============================================================
--- packages/linux/linux-hackndev-2.6/palmz72/defconfig f84d05974a87f4d8290649f317846da27ae3a0d8
+++ packages/linux/linux-hackndev-2.6/palmz72/defconfig af20c920243feef216e18bbbcae35201646910b8
@@ -1,15 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-hnd0
-# Sat Feb 3 23:56:17 2007
+# Linux kernel version: 2.6.21-hnd2
+# Sun Jul 1 04:44:00 2007
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@@ -26,18 +38,24 @@ CONFIG_SYSVIPC=y
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
-# CONFIG_MINIMAL_OOPS is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
@@ -48,9 +66,9 @@ CONFIG_SHMEM=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_USELIB=y
-# CONFIG_CORE_DUMP is not set
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -68,7 +86,10 @@ CONFIG_KMOD=y
#
# Block layer
#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -86,18 +107,29 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@@ -105,12 +137,8 @@ CONFIG_ARCH_PXA=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_BOARD_IRQ_MAP_SMALL is not set
+# CONFIG_BOARD_IRQ_MAP_BIG is not set
#
# Intel PXA2xx Implementations
@@ -119,12 +147,14 @@ CONFIG_ARCH_PXA=y
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_TOSHIBA_TMIO_OHCI is not set
# CONFIG_ARCH_ESERIES is not set
# CONFIG_MACH_A620 is not set
# CONFIG_MACH_A716 is not set
+# CONFIG_MACH_A730 is not set
# CONFIG_ARCH_H1900 is not set
# CONFIG_ARCH_H2200 is not set
-# CONFIG_ARCH_H3900 is not set
+# CONFIG_MACH_H3900 is not set
# CONFIG_MACH_H4000 is not set
# CONFIG_MACH_H4700 is not set
# CONFIG_MACH_HX2750 is not set
@@ -136,8 +166,11 @@ CONFIG_ARCH_PXA=y
# CONFIG_MACH_HTCAPACHE is not set
# CONFIG_MACH_BLUEANGEL is not set
# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_ARCH_AXIMX5 is not set
+# CONFIG_MACH_HW6900 is not set
+# CONFIG_MACH_HTCATHENA is not set
# CONFIG_ARCH_AXIMX3 is not set
+# CONFIG_ARCH_AXIMX5 is not set
+# CONFIG_MACH_X50 is not set
# CONFIG_ARCH_ROVERP1 is not set
# CONFIG_ARCH_ROVERP5P is not set
# CONFIG_MACH_XSCALE_PALMLD is not set
@@ -151,16 +184,15 @@ CONFIG_PALMZ72_BATTERY=m
CONFIG_MACH_PALMZ72=y
CONFIG_PALMZ72_PM=y
CONFIG_PALMZ72_BATTERY=m
-CONFIG_GPIOED=m
-CONFIG_GPIOEDNG=m
# CONFIG_MACH_OMAP_PALMTC is not set
# CONFIG_MACH_ZIRE31 is not set
+CONFIG_GPIOED=m
+CONFIG_GPIOEDNG=m
+# CONFIG_MACH_GHI270HG is not set
+# CONFIG_MACH_GHI270 is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA27x=y
-CONFIG_PXA_RTC_EPOCH=1970
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_H3800 is not set
#
# Linux As Bootloader
@@ -176,29 +208,20 @@ CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
# CONFIG_ARMBOOT_PROC is not set
CONFIG_XSCALE_PMU=y
-# CONFIG_KEXEC is not set
#
-# Compaq/iPAQ Platforms
-#
-
-#
-# Compaq/iPAQ Drivers
-#
-
-#
-# Compaq/HP iPAQ Drivers
-#
-# CONFIG_IPAQ_HAMCOP is not set
-
-#
# Bus support
#
@@ -222,6 +245,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_ALIGNMENT_TRAP=y
#
@@ -231,6 +256,8 @@ CONFIG_CMDLINE="mem=32M"
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_TXTOFFSET_DELTA is not set
#
# CPU Frequency scaling
@@ -260,8 +287,10 @@ CONFIG_PM_LEGACY=y
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
-CONFIG_PM_DEBUG=y
-CONFIG_APM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_DPM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_APM_EMULATION=y
#
# Networking
@@ -272,8 +301,13 @@ CONFIG_NET=y
# Networking options
#
# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
+CONFIG_PACKET=m
+# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -289,13 +323,19 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@@ -321,7 +361,6 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -335,14 +374,14 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
+CONFIG_IRDA=y
#
# IrDA protocols
#
-# CONFIG_IRLAN is not set
-# CONFIG_IRNET is not set
-# CONFIG_IRCOMM is not set
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set
#
@@ -369,27 +408,35 @@ CONFIG_IRTTY_SIR=m
#
# Old SIR device drivers
#
-# CONFIG_IRPORT_SIR is not set
+CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
+# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
-CONFIG_PXA_FICP=m
-CONFIG_BT=m
-# CONFIG_BT_L2CAP is not set
-# CONFIG_BT_SCO is not set
+CONFIG_PXA_FICP=y
+CONFIG_BT=y
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_H4 is not set
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIVHCI is not set
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_BCM2035UART=m
+CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
@@ -407,7 +454,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@@ -427,6 +475,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
+# CONFIG_PNPACPI is not set
#
# Block devices
@@ -438,7 +487,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -452,8 +501,14 @@ CONFIG_BLK_DEV_INITRD=y
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
@@ -492,6 +547,7 @@ CONFIG_MII=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
#
# Ethernet (1000 Mbit)
@@ -516,15 +572,16 @@ CONFIG_PPP=y
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_SLHC=y
+CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -538,6 +595,7 @@ CONFIG_INPUT=y
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
@@ -549,6 +607,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_TSDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_LED_TRIGGER is not set
#
# Input Device Drivers
@@ -560,9 +619,12 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_GPIODEV_KEYS is not set
+# CONFIG_GPIODEV_DIAGONAL is not set
CONFIG_KEYBOARD_PXA27x=y
# CONFIG_KEYBOARD_PALMIR is not set
CONFIG_KEYBOARD_PALMWK=m
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TOUCHSCREEN=y
@@ -571,6 +633,11 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_PALMTC is not set
CONFIG_TOUCHSCREEN_WM97XX=y
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
@@ -593,6 +660,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -606,51 +674,78 @@ CONFIG_SERIAL_PXA_COUNT=4
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_PXA_COUNT=4
+# CONFIG_SERIAL_PXA_IR is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_RS232_SERIAL is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
-# I2C support
+# IPMI
#
-# CONFIG_I2C is not set
+# CONFIG_IPMI_HANDLER is not set
#
-# L3 serial bus support
+# Watchdog Cards
#
-# CONFIG_L3 is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_TIHTC is not set
+# CONFIG_RAW_DRIVER is not set
#
-# Mice
+# TPM devices
#
-# CONFIG_BUSMOUSE is not set
+# CONFIG_TCG_TPM is not set
#
-# IPMI
+# I2C support
#
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
#
-# Watchdog Cards
+# I2C Algorithms
#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_SA1100_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_ALGOPXA=m
#
-# Ftape, the floppy tape device driver
+# I2C Hardware Bus support
#
-# CONFIG_RAW_DRIVER is not set
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
#
-# TPM devices
+# Miscellaneous I2C Chip support
#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_I2C_ADCM2650 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCA9535 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_OV9640 is not set
+CONFIG_I2C_OV96XX=m
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
#
# SPI support
@@ -661,12 +756,13 @@ CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
-# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_BITBANG=m
CONFIG_SPI_PXA2XX=y
#
# SPI Protocol Masters
#
+# CONFIG_SPI_AT25 is not set
#
# Dallas's 1-wire bus
@@ -676,31 +772,89 @@ CONFIG_SPI_PXA2XX=y
#
# Hardware Monitoring support
#
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+CONFIG_APM_POWER=y
+# CONFIG_BATTERY_DS2760 is not set
#
-# SoC drivers
+# L3 serial bus support
#
-# CONFIG_SOC_MQ11XX is not set
-# CONFIG_SOC_T7L66XB is not set
-# CONFIG_SOC_TC6387XB is not set
-# CONFIG_SOC_TC6393XB is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
+# CONFIG_L3 is not set
#
# Misc devices
#
-CONFIG_BATTERY_MONITOR=y
# CONFIG_BATTCHARGE_MONITOR is not set
#
# Multimedia Capabilities Port drivers
#
-# CONFIG_MCP is not set
+# CONFIG_ADC is not set
#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_ASIC2 is not set
+# CONFIG_HTC_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_ASIC3_DS1WM is not set
+# CONFIG_SOC_SAMCOP is not set
+# CONFIG_SOC_HAMCOP is not set
+# CONFIG_SOC_MQ11XX is not set
+# CONFIG_SOC_T7L66XB is not set
+# CONFIG_SOC_TC6387XB is not set
+# CONFIG_SOC_TC6393XB is not set
+# CONFIG_SOC_TSC2101 is not set
+# CONFIG_SOC_TSC2200 is not set
+
+#
# LED devices
#
CONFIG_NEW_LEDS=y
@@ -716,11 +870,15 @@ CONFIG_LEDS_TRIGGER_TIMER=y
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HWTIMER is not set
+CONFIG_LEDS_TRIGGER_MMC_CARD=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_SHARED is not set
#
# Multimedia devices
#
-CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
@@ -732,18 +890,17 @@ CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
-CONFIG_VIDEO_ADV_DEBUG=y
-# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+CONFIG_PXACI=m
#
-# Encoders and Decoders
-#
-
-#
# Radio Adapters
#
-# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
@@ -753,19 +910,33 @@ CONFIG_VIDEO_ADV_DEBUG=y
#
# Graphics support
#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PXAPWM=y
CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_IMAGEON is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VSFB is not set
#
# Console display driver support
@@ -793,12 +964,6 @@ CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_PXAPWM=y
-# CONFIG_LCD_CLASS_DEVICE is not set
#
# Sound
@@ -817,16 +982,16 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_DETECT=y
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
@@ -835,16 +1000,29 @@ CONFIG_SND_AC97_BUS=y
#
# ALSA ARM devices
#
-# CONFIG_SND_PXA2xx_I2SOUND is not set
+CONFIG_SND_PXA2xx_I2SOUND=y
CONFIG_SND_PXA2XX_PCM=y
CONFIG_SND_PXA2XX_AC97=y
+# CONFIG_SND_RECON is not set
#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -867,20 +1045,25 @@ CONFIG_USB_PXA27X=y
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
# CONFIG_USB_PXA27X_DMA is not set
+# CONFIG_USB_GADGET_SX2 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_MQ11XX is not set
# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_CHAR is not set
+# CONFIG_USB_PXA2XX_GPIO is not set
#
# MMC/SD Card support
@@ -891,14 +1074,13 @@ CONFIG_MMC_PXA=y
CONFIG_MMC_PXA=y
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SAMCOP is not set
-# CONFIG_MMC_ASIC3 is not set
-# CONFIG_MMC_WBSD_PALMT3 is not set
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
+CONFIG_RTC_EPOCH=1970
#
# RTC interfaces
@@ -906,13 +1088,26 @@ CONFIG_RTC_INTF_DEV=m
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_SA1100=m
# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
# File systems
@@ -921,10 +1116,12 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -933,7 +1130,7 @@ CONFIG_AUTOFS4_FS=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -955,8 +1152,10 @@ CONFIG_PROC_FS=y
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
@@ -966,6 +1165,7 @@ CONFIG_RAMFS=y
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
+# CONFIG_AUFS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
@@ -976,12 +1176,13 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_SQUASHFS_LZMA is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-CONFIG_UNION_FS=m
+# CONFIG_UNION_FS is not set
#
# Network File Systems
@@ -1054,6 +1255,11 @@ CONFIG_NLS_UTF8=y
CONFIG_NLS_UTF8=y
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -1062,14 +1268,16 @@ CONFIG_NLS_UTF8=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_SMALLOOPS is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
# CONFIG_DEBUG_USER is not set
#
@@ -1082,16 +1290,26 @@ CONFIG_CRYPTO=y
# Cryptographic options
#
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
+CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
@@ -1105,6 +1323,7 @@ CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
@@ -1114,8 +1333,13 @@ CONFIG_CRYPTO_ARC4=m
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [RFC] Palms commits.
2007-07-10 15:45 [RFC] Palms commits Sergey Lapin
@ 2007-07-10 18:16 ` Paul Sokolovsky
2007-07-10 19:11 ` Sergey Lapin
2007-07-10 21:01 ` Richard Purdie
1 sibling, 1 reply; 7+ messages in thread
From: Paul Sokolovsky @ 2007-07-10 18:16 UTC (permalink / raw)
To: Sergey Lapin; +Cc: openembedded-devel
Hello Sergey,
Tuesday, July 10, 2007, 6:45:11 PM, you wrote:
> Hi, all!
> I just had raging argument with Paul Sokolovsky about my commits,
> so I'd like to RFC them, and also I'd like to ask if all these changes
> should be passed through RFC.
> Please, see attachments. Sorry for post-factum.
> Briefly, these commits generalize palms support and make maintenance
> easier, also, update Zire 72 configuration.
Well, I regret that even after discussion on IRC you still miss the
point. The talk was not about "palm commits" per se, but about
refactors to make machines more maintainable. OE obviously has
noticeable problems with that, and trying to solve them in local
machine corners won't benefit OE, but in the end just will become the
same mess but in the other plane.
So, if you have bright ideas how to optimize maintenance, please
think how it fits with already existing machine support framework
(task-base), share them with wider audience, and call for feedback.
I'm sure there're parties interested in the same changes, and getting
together may lead to much better result for OE as a whole.
Of course, you're free to treat those changes as Palm local, but
what I wrote still holds - machine configs in OE need refactoring and
elaboration. If you don't want to put a bit more effort into that and
make your changes useful universally, then someone else will need to
duplicate large part of your work, and possibly achieve incompatible
results with your current scheme. As that someone hopefully will
target it on global level, then palm config would need to be changed
too, so in the end it will appear turn out that you lost time too.
Summing up, by investing 50% more effort into that, there can be 5
times more outcome. And as a "fresh blood" in OE, you're in good
position to lead this, as other developers are of course stuck with
other issues.
> Thanks a lot,
> S.
--
Best regards,
Paul mailto:pmiscml@gmail.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC] Palms commits.
2007-07-10 18:16 ` Paul Sokolovsky
@ 2007-07-10 19:11 ` Sergey Lapin
2007-07-10 19:58 ` Michael Krelin
2007-07-10 21:08 ` Paul Sokolovsky
0 siblings, 2 replies; 7+ messages in thread
From: Sergey Lapin @ 2007-07-10 19:11 UTC (permalink / raw)
To: Paul Sokolovsky; +Cc: openembedded-devel
Paul Sokolovsky wrote:
> Hello Sergey,
>
> Tuesday, July 10, 2007, 6:45:11 PM, you wrote:
>
>> Hi, all!
>
>> I just had raging argument with Paul Sokolovsky about my commits,
>> so I'd like to RFC them, and also I'd like to ask if all these changes
>> should be passed through RFC.
>
>> Please, see attachments. Sorry for post-factum.
>
>> Briefly, these commits generalize palms support and make maintenance
>> easier, also, update Zire 72 configuration.
>
> Well, I regret that even after discussion on IRC you still miss the
> point. The talk was not about "palm commits" per se, but about
> refactors to make machines more maintainable. OE obviously has
> noticeable problems with that, and trying to solve them in local
> machine corners won't benefit OE, but in the end just will become the
> same mess but in the other plane.
And I was telling you that in my position, such big start is doubtful,
if not impossible by several reasons, among which I need to learn
infrastructure mechanics in OE, and I need to get more time and effort,
because of busy schedule. So it is not possible _immediately_.
Your argument still amazes me.
>
> So, if you have bright ideas how to optimize maintenance, please
> think how it fits with already existing machine support framework
> (task-base), share them with wider audience, and call for feedback.
> I'm sure there're parties interested in the same changes, and getting
> together may lead to much better result for OE as a whole.
I never disagreed on this thing, since it is generic enough as a concept.
>
> Of course, you're free to treat those changes as Palm local, but
> what I wrote still holds - machine configs in OE need refactoring and
> elaboration. If you don't want to put a bit more effort into that and
> make your changes useful universally, then someone else will need to
> duplicate large part of your work, and possibly achieve incompatible
> results with your current scheme. As that someone hopefully will
> target it on global level, then palm config would need to be changed
> too, so in the end it will appear turn out that you lost time too.
I understand your point here, but if I prefer only start doing
something when I can handle that thing, and when I can be
responsible for it. If at the moment I can finish 1 little thing,
then that's what I'm going to do. If I have resources to spend on
bigger problem, I go and solve one (or help somebody with even bigger issues).
I have a list of smaller thingies I can do just passing by, and bigger ones,
which I leave for bigger windows of time.
Do you understand my time management better now? That's probably would
clear our discussion?
>
> Summing up, by investing 50% more effort into that, there can be 5
> times more outcome. And as a "fresh blood" in OE, you're in good
> position to lead this, as other developers are of course stuck with
> other issues.
Do you count yourself in this 50%, btw?
Best regards,
S.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC] Palms commits.
2007-07-10 19:11 ` Sergey Lapin
@ 2007-07-10 19:58 ` Michael Krelin
2007-07-10 21:08 ` Paul Sokolovsky
1 sibling, 0 replies; 7+ messages in thread
From: Michael Krelin @ 2007-07-10 19:58 UTC (permalink / raw)
To: openembedded-devel
Sergey Lapin wrote:
> Paul Sokolovsky wrote:
I got a strong feeling that you guys have unnecessary tension between
you. That doesn't invalidate arguments on either side, but I do not see
how can any of your differences be settled.
Just a smartass comment in an attemt to prevent you from throwing
heavier things ;-)
Love,
H
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC] Palms commits.
2007-07-10 19:11 ` Sergey Lapin
2007-07-10 19:58 ` Michael Krelin
@ 2007-07-10 21:08 ` Paul Sokolovsky
1 sibling, 0 replies; 7+ messages in thread
From: Paul Sokolovsky @ 2007-07-10 21:08 UTC (permalink / raw)
To: Sergey Lapin; +Cc: openembedded-devel
Hello Sergey,
Tuesday, July 10, 2007, 10:11:48 PM, you wrote:
[]
>> Summing up, by investing 50% more effort into that, there can be 5
>> times more outcome. And as a "fresh blood" in OE, you're in good
>> position to lead this, as other developers are of course stuck with
>> other issues.
> Do you count yourself in this 50%, btw?
Absolutely. I contemplated such a change for a long time, actually
current work on adding missing hh.org machine to OE and switching to
defconfiman kernel configuration management are initial steps on that
way. I didn't proceed with OE machine configs cleanup, because well,
it takes some real world dataset to make it general enough, and
because HH.org kernel project was literally the only stakeholder for
such changes, with couple of dozens of machines and counting (whereas
even Zaurus project has around half-dozen architecturally different
machines). So, I eagerly awaited other projects, like Hackhdev to join
more actively with OE, to tackle these issues together.
I understand your worktime constraints, and the need to get practice
with OE and mtn, but there're other creative ways to get it - like,
for example, adding support for other 8 or so Palm devices in addition
to 4 already in OE. This would be pretty worthy a job for Palm devices
maintainer, and at the same time would happen to give us mentioned raw
dataset to base firm decisions on. And there's also good chance for us
to get in sync, so all Palm and PocketPC devices are in OE, that can't
be checked off for both projects, and we can proceed further with
better support and maintenance facilitation. Of course, this all is
from my side of view, YMMV.
> Best regards,
> S.
--
Best regards,
Paul mailto:pmiscml@gmail.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC] Palms commits.
2007-07-10 15:45 [RFC] Palms commits Sergey Lapin
2007-07-10 18:16 ` Paul Sokolovsky
@ 2007-07-10 21:01 ` Richard Purdie
2007-07-11 12:59 ` Sergey Lapin
1 sibling, 1 reply; 7+ messages in thread
From: Richard Purdie @ 2007-07-10 21:01 UTC (permalink / raw)
To: openembedded-devel
Hi,
On Tue, 2007-07-10 at 19:45 +0400, Sergey Lapin wrote:
> I just had raging argument with Paul Sokolovsky about my commits,
> so I'd like to RFC them, and also I'd like to ask if all these changes
> should be passed through RFC.
>
> Please, see attachments. Sorry for post-factum.
I looked at the attachment and it does give me cause for concern.
What's missing from your email is a clear piece of text saying why
you're making the changes you are. Your commits are also a bit confused.
Updating a kernel defconfig in "Palm Zire 72 machine update" isn't very
obvious.
As for comments on specific things in the patch, in principle I agree
with common machine files and kernel updates. The
MACHINE_EXTRA_RRECOMMENDS in the patch looks horrendous however and it
does go against the principles of task-base and friends.
Problems with the MACHINE_EXTRA_RRECOMMENDS include:
* the modules should have dependency information which removes the need
for all sound modules to be listed for example, you only need the ones
at the tips of the chains.
* duplication with entries already in task-base
The module_autoload statements also look scary. Is the device totally
incapable of loading some of them for itself? I know for a fact you
don't need all the sound ones.
Regards,
Richard
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [RFC] Palms commits.
2007-07-10 21:01 ` Richard Purdie
@ 2007-07-11 12:59 ` Sergey Lapin
0 siblings, 0 replies; 7+ messages in thread
From: Sergey Lapin @ 2007-07-11 12:59 UTC (permalink / raw)
To: openembedded-devel; +Cc: openembedded-devel
On 7/11/07, Richard Purdie <rpurdie@rpsys.net> wrote:
> Hi,
Hi,
Richard, thanks for your comments!
>
> I looked at the attachment and it does give me cause for concern.
>
> What's missing from your email is a clear piece of text saying why
> you're making the changes you are. Your commits are also a bit confused.
> Updating a kernel defconfig in "Palm Zire 72 machine update" isn't very
> obvious.
Well, this particular one is mostly due to kernel version update et
al., no functional changes with device point of view, just
un-breaking.
>
> As for comments on specific things in the patch, in principle I agree
> with common machine files and kernel updates. The
> MACHINE_EXTRA_RRECOMMENDS in the patch looks horrendous however and it
> does go against the principles of task-base and friends.
>
> Problems with the MACHINE_EXTRA_RRECOMMENDS include:
>
> * the modules should have dependency information which removes the need
> for all sound modules to be listed for example, you only need the ones
> at the tips of the chains.
> * duplication with entries already in task-base
Well, that's probably my misunderstanding/ignorance here.
Could you please give me references on where to study this particular
subject (module packages dependencies).
>
> The module_autoload statements also look scary. Is the device totally
> incapable of loading some of them for itself? I know for a fact you
> don't need all the sound ones.
Yes, but there I have to resolve dependencies by hand, am I right?
Thanks a lot,
S.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2007-07-11 13:05 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-10 15:45 [RFC] Palms commits Sergey Lapin
2007-07-10 18:16 ` Paul Sokolovsky
2007-07-10 19:11 ` Sergey Lapin
2007-07-10 19:58 ` Michael Krelin
2007-07-10 21:08 ` Paul Sokolovsky
2007-07-10 21:01 ` Richard Purdie
2007-07-11 12:59 ` Sergey Lapin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.