* [linux-lvm] LVM & Raid
@ 1999-10-03 11:48 Lars Segerlund
1999-10-03 15:42 ` Andreas Kostyrka
1999-10-12 18:15 ` Heinz Mauelshagen
0 siblings, 2 replies; 3+ messages in thread
From: Lars Segerlund @ 1999-10-03 11:48 UTC (permalink / raw)
To: linux-lvm
Hello,
I'm having trouble setting up lvm on a raid5 array ( /dev/md0 ),
my trouble is that pvscan doesn't find it, ( how in the heck
do I label a raid partitium so that pvscan vill recognize and vgcreate
will think of it a partitiun ?? )
I have been running lvm with raw disks, but now I seem a bit stuck.
By the way it's an alpha and v0.7. 2.2.12
/ best regards.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-lvm] LVM & Raid
1999-10-03 11:48 [linux-lvm] LVM & Raid Lars Segerlund
@ 1999-10-03 15:42 ` Andreas Kostyrka
1999-10-12 18:15 ` Heinz Mauelshagen
1 sibling, 0 replies; 3+ messages in thread
From: Andreas Kostyrka @ 1999-10-03 15:42 UTC (permalink / raw)
To: Lars Segerlund; +Cc: linux-lvm
On Sun, 3 Oct 1999, Lars Segerlund wrote:
>
> Hello,
>
> I'm having trouble setting up lvm on a raid5 array ( /dev/md0 ),
> my trouble is that pvscan doesn't find it, ( how in the heck
Well, see the list archives, I've posted a small patch so that it can be
found.
> do I label a raid partitium so that pvscan vill recognize and vgcreate
> will think of it a partitiun ?? )
>
> I have been running lvm with raw disks, but now I seem a bit stuck.
Well, I did get some hung boxes (completely hung, without oopses, etc.
on a raid0145 / LVM 0.7 box with a RAID5 physical volume. So I reverted
to using raid0145 with LVM :( )
Andreas
--
Andreas Kostyrka | andreas@mtg.co.at
phone: +43/1/7070750 | phone: +43/676/4091256
MTG Handelsges.m.b.H. | fax: +43/1/7065299
Raiffeisenstr. 16/9 | 2320 Zwoelfaxing AUSTRIA
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-lvm] LVM & Raid
1999-10-03 11:48 [linux-lvm] LVM & Raid Lars Segerlund
1999-10-03 15:42 ` Andreas Kostyrka
@ 1999-10-12 18:15 ` Heinz Mauelshagen
1 sibling, 0 replies; 3+ messages in thread
From: Heinz Mauelshagen @ 1999-10-12 18:15 UTC (permalink / raw)
To: Lars Segerlund; +Cc: mge, linux-lvm
Hi Lars.
>
> I'm having trouble setting up lvm on a raid5 array ( /dev/md0 ),
> my trouble is that pvscan doesn't find it, ( how in the heck
> do I label a raid partitium so that pvscan vill recognize and vgcreate
> will think of it a partitiun ?? )
You don't have to 'label' it.
Just say "pvcreate /dev/md0" and "vgcreate Idontknow /dev/md0".
pv_read_all_pv() should find your /dev/md0 after you did that pvcreate on it.
But...
Because pv_read_all_pv() relies on the /dev setup, you might suffer
from some unusual /dev/md* entries.
Please check them and run "pvscan -d" looking for /dev/md* hits.
Look what pvscan thinks of them please.
>
> I have been running lvm with raw disks, but now I seem a bit stuck.
>
> By the way it's an alpha and v0.7. 2.2.12
>
Regards,
Heinz
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Systemmanagement CS-TS T-Nova
Entwicklungszentrum Darmstadt
Heinz Mauelshagen Otto-Roehm-Strasse 71c
Senior Systems Engineer Postfach 10 05 41
64205 Darmstadt
mge@ez-darmstadt.telekom.de Germany
+49 6151 886-425
FAX-386
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~1999-10-12 18:15 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-10-03 11:48 [linux-lvm] LVM & Raid Lars Segerlund
1999-10-03 15:42 ` Andreas Kostyrka
1999-10-12 18:15 ` Heinz Mauelshagen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.