Re: [PATCH v3 5/7] arm64: dts: ti: k3-j722s: Add lane mux for Serdes1

From: Roger Quadros <rogerq@kernel.org>
To: Siddharth Vadapalli <s-vadapalli@ti.com>,
	nm@ti.com, vigneshr@ti.com, afd@ti.com, kristo@kernel.org,
	robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, u-kumar1@ti.com,
	danishanwar@ti.com, srk@ti.com
Subject: Re: [PATCH v3 5/7] arm64: dts: ti: k3-j722s: Add lane mux for Serdes1
Date: Tue, 28 May 2024 15:23:32 +0300	[thread overview]
Message-ID: <1e6242a1-2dc5-4f88-9cbb-eb14a27cccc4@kernel.org> (raw)
In-Reply-To: <20240524090514.152727-6-s-vadapalli@ti.com>

On 24/05/2024 12:05, Siddharth Vadapalli wrote:
> The Serdes1 instance of Serdes on J722S SoC can be muxed between PCIe0

Please use SERDES insted of Serdes or serdes as it is an abbreviation.

> and SGMII1. Update the "serdes_ln_ctrl" node adding support for the lane
> mux of Serdes1. Additionally, set the default muxing for Serdes1 Lane0 to
> PCIe0.
> 
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
> Current patch is v1. No changelog.
> 
>  arch/arm64/boot/dts/ti/k3-j722s-evm.dts   | 3 ++-
>  arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 5 +++--
>  2 files changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> index a3bda39cc223..16c6ab8ee07e 100644
> --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> @@ -401,7 +401,8 @@ &sdhci1 {
>  };
>  
>  &serdes_ln_ctrl {
> -	idle-states = <J722S_SERDES0_LANE0_USB>;
> +	idle-states = <J722S_SERDES0_LANE0_USB>,
> +		      <J722S_SERDES1_LANE0_PCIE0_LANE0>;
>  };
>  
>  &serdes0 {
> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> index b069cecebfd9..48b77e476c77 100644
> --- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> @@ -96,8 +96,9 @@ usb1: usb@31200000{
>  &main_conf {
>  	serdes_ln_ctrl: mux-controller@4080 {
>  		compatible = "reg-mux";
> -		reg = <0x4080 0x4>;
> +		reg = <0x4080 0x14>;
>  		#mux-control-cells = <1>;
> -		mux-reg-masks = <0x0 0x3>; /* SERDES0 lane0 select */
> +		mux-reg-masks = <0x0 0x3>, /* SERDES0 lane0 select */
> +				<0x10 0x3>; /* SERDES1 lane0 select */

Why not introduce this right in the patch where you add serdes_ln_ctrl mux node?

>  	};
>  };

-- 
cheers,
-roger

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel