From: Jerome Brunet <jbrunet@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>,
Christian Hewitt <christianshewitt@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: meson-g12b-gtking: add initial device-tree
Date: Thu, 05 Mar 2020 09:22:01 +0100 [thread overview]
Message-ID: <1jftencity.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <cc4c54c8-aa7f-8755-dc35-94e32d0019cd@baylibre.com>
On Tue 03 Mar 2020 at 15:50, Neil Armstrong <narmstrong@baylibre.com> wrote:
> On 29/02/2020 15:09, Christian Hewitt wrote:
>> The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
>> board with an S922X chip.
>>
>> - 4GB LPDDR4 RAM
>> - 64GB eMMC storage
>> - 10/100/1000 Base-T Ethernet
>> - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
>> - HDMI 2.1 video
>> - S/PDIF optical output
>> - Analogue audio output
>> - 1x USB 2.0 port
>> - 2x USB 3.0 ports
>> - IR receiver
>> - 1x micro SD card slot
>>
>> The device-tree is largely based on meson-g12b-ugoos-am6.
largely indeed ... Would you mind pointing out why the am6 dts can't be
used and why this one is needed ?
Maybe I missed something but they look the same to me.
>>
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>> ---
>> arch/arm64/boot/dts/amlogic/Makefile | 1 +
>> arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts | 557 ++++++++++++++++++++++
>> 2 files changed, 558 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index eef0045..1fd28e8 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
>> new file mode 100644
>> index 0000000..819f208
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
>> @@ -0,0 +1,557 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 BayLibre, SAS
>> + * Author: Neil Armstrong <narmstrong@baylibre.com>
>> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
>> + */
>> +
[...]
>> +
>> +&spdifout_b {
>> + status = "okay";
>> +};
>> +
Again, not support by the HDMI controller and not used in the sound card.
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>,
Christian Hewitt <christianshewitt@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: meson-g12b-gtking: add initial device-tree
Date: Thu, 05 Mar 2020 09:22:01 +0100 [thread overview]
Message-ID: <1jftencity.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <cc4c54c8-aa7f-8755-dc35-94e32d0019cd@baylibre.com>
On Tue 03 Mar 2020 at 15:50, Neil Armstrong <narmstrong@baylibre.com> wrote:
> On 29/02/2020 15:09, Christian Hewitt wrote:
>> The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
>> board with an S922X chip.
>>
>> - 4GB LPDDR4 RAM
>> - 64GB eMMC storage
>> - 10/100/1000 Base-T Ethernet
>> - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
>> - HDMI 2.1 video
>> - S/PDIF optical output
>> - Analogue audio output
>> - 1x USB 2.0 port
>> - 2x USB 3.0 ports
>> - IR receiver
>> - 1x micro SD card slot
>>
>> The device-tree is largely based on meson-g12b-ugoos-am6.
largely indeed ... Would you mind pointing out why the am6 dts can't be
used and why this one is needed ?
Maybe I missed something but they look the same to me.
>>
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>> ---
>> arch/arm64/boot/dts/amlogic/Makefile | 1 +
>> arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts | 557 ++++++++++++++++++++++
>> 2 files changed, 558 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index eef0045..1fd28e8 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
>> new file mode 100644
>> index 0000000..819f208
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
>> @@ -0,0 +1,557 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 BayLibre, SAS
>> + * Author: Neil Armstrong <narmstrong@baylibre.com>
>> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
>> + */
>> +
[...]
>> +
>> +&spdifout_b {
>> + status = "okay";
>> +};
>> +
Again, not support by the HDMI controller and not used in the sound card.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>,
Christian Hewitt <christianshewitt@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: meson-g12b-gtking: add initial device-tree
Date: Thu, 05 Mar 2020 09:22:01 +0100 [thread overview]
Message-ID: <1jftencity.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <cc4c54c8-aa7f-8755-dc35-94e32d0019cd@baylibre.com>
On Tue 03 Mar 2020 at 15:50, Neil Armstrong <narmstrong@baylibre.com> wrote:
> On 29/02/2020 15:09, Christian Hewitt wrote:
>> The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
>> board with an S922X chip.
>>
>> - 4GB LPDDR4 RAM
>> - 64GB eMMC storage
>> - 10/100/1000 Base-T Ethernet
>> - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
>> - HDMI 2.1 video
>> - S/PDIF optical output
>> - Analogue audio output
>> - 1x USB 2.0 port
>> - 2x USB 3.0 ports
>> - IR receiver
>> - 1x micro SD card slot
>>
>> The device-tree is largely based on meson-g12b-ugoos-am6.
largely indeed ... Would you mind pointing out why the am6 dts can't be
used and why this one is needed ?
Maybe I missed something but they look the same to me.
>>
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>> ---
>> arch/arm64/boot/dts/amlogic/Makefile | 1 +
>> arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts | 557 ++++++++++++++++++++++
>> 2 files changed, 558 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index eef0045..1fd28e8 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
>> new file mode 100644
>> index 0000000..819f208
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
>> @@ -0,0 +1,557 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 BayLibre, SAS
>> + * Author: Neil Armstrong <narmstrong@baylibre.com>
>> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
>> + */
>> +
[...]
>> +
>> +&spdifout_b {
>> + status = "okay";
>> +};
>> +
Again, not support by the HDMI controller and not used in the sound card.
next prev parent reply other threads:[~2020-03-05 8:22 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-29 14:09 [PATCH 0/2] arm64: dts: meson: add dts/bindings for Beelink GT-King Christian Hewitt
2020-02-29 14:09 ` Christian Hewitt
2020-02-29 14:09 ` Christian Hewitt
2020-02-29 14:09 ` [PATCH 1/2] dt-bindings: arm: amlogic: add support for the " Christian Hewitt
2020-02-29 14:09 ` Christian Hewitt
2020-02-29 14:09 ` Christian Hewitt
2020-03-03 14:50 ` Neil Armstrong
2020-03-03 14:50 ` Neil Armstrong
2020-03-03 14:50 ` Neil Armstrong
2020-03-10 18:49 ` Rob Herring
2020-03-10 18:49 ` Rob Herring
2020-03-10 18:49 ` Rob Herring
2020-02-29 14:09 ` [PATCH 2/2] arm64: dts: meson-g12b-gtking: add initial device-tree Christian Hewitt
2020-02-29 14:09 ` Christian Hewitt
2020-02-29 14:09 ` Christian Hewitt
2020-03-03 14:50 ` Neil Armstrong
2020-03-03 14:50 ` Neil Armstrong
2020-03-03 14:50 ` Neil Armstrong
2020-03-05 8:22 ` Jerome Brunet [this message]
2020-03-05 8:22 ` Jerome Brunet
2020-03-05 8:22 ` Jerome Brunet
2020-03-16 16:44 ` Kevin Hilman
2020-03-16 16:44 ` Kevin Hilman
2020-03-16 16:44 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1jftencity.fsf@starbuckisacylon.baylibre.com \
--to=jbrunet@baylibre.com \
--cc=christianshewitt@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.