* [parisc-linux] Bug report
@ 2000-09-08 18:54 Robert Stickel
2000-09-11 12:04 ` Richard Hirst
0 siblings, 1 reply; 2+ messages in thread
From: Robert Stickel @ 2000-09-08 18:54 UTC (permalink / raw)
To: parisc-linux
Hello,
The good news: We are really excited about the Puffin project.
The bad news: We tried to boot an Apollo 9000/710 on your PA/Linux
Developer's
Release CD, Version 0.1 - Snapshot 2000/08/04 and never quite got to a
root
prompt (see transcript below). Should this be possible or are we
missing
something?
Thanks for any advice,
rstickel@mindspring.com
sts@minitower.gtri.gatech.edu
Transcript of attempt to boot Apollo 9000/710 on Puffin CD. At the
request_irq(259, c01ec76c, 0x0, asp, c3fcd080)
line the systems hangs.
(c) Copyright. Hewlett-Packard Company. 1991.
All rights reserved.
PDC ROM rev. 2.0
IODC ROM rev. 2.0
64 MB of memory configured and tested.
Selecting a system to boot.
To stop selection process, press and hold the ESCAPE key.
Selection process stopped.
Searching for Potential Boot Devices.
To terminate search, press and hold the ESCAPE key.
Device Selection Device Path Device Type
----------------------------------------------------------------------------
P0 scsi.6.0 MATSHITACD-ROM CR-8005A
P1 scsi.5.0 IOMEGA ZIP 100
P2 scsi.4.0 iomega jaz 1GB
P3 scsi.3.0 SEAGATE ST11200N SUN1.05
P4 scsi.2.0 SEAGATE ST31230N
P5 scsi.1.0 IBM 0662
b) Boot from specified device
s) Search for bootable devices
a) Enter Boot Administration mode
x) Exit and continue boot sequence
?) Help
Select from menu: a
BOOT_ADMIN> info
----------------------------- Hardware Configuration
------------------------
Machine model: 9000/710
Processor Frequency = 50000000 Hz
I/O Subsystem Frequency = 25000000 Hz
LAN Jumper Status: Internal ThinLAN Port selected
Processor Revision = 3
System Controller Revision = 0
Floating Point Coprocessor Revision = 3
Hardware Version 12288 (0x00003000)
Software Version 1153 (0x00000481)
BOOT_ADMIN> boot alt
Trying scsi.6.0
Boot path initialized.
Attempting to load IPL.
Hard booted.
palo ipl bame@noam Fri Aug 4 18:36:35 MDT 2000
0/vmlinux 2349352 bytes @ 0x6e8800
0/palo-cmdline '0/vmlinux TERM=linux HOME=/ root=/dev/scd0'
Kernel: partition 0 file /vmlinux
ELF32 executable
Entry 00100000 first 00100000 n 4
Segment 0 load 00100000 size 1511580 mediaptr 0x1000
Segment 1 load 00272000 size 132368 mediaptr 0x173000
Segment 2 load 00294000 size 86880 mediaptr 0x194000
Segment 3 load 002ac000 size 8192 mediaptr 0x1aa000
branching to kernel entry point 0x00100000
pdc_cons registered !
The Kernel has started...
Free memory starts at: 0xc02dc000
PALO command line: 'TERM=linux HOME=/ root=/dev/scd0'
PALO initrd 0-0
FP CCR was 0x0, will be set to 0xc0
model 00003000 00000481 00000000 00000000 78243572 00000000 00000004
0000000d 00000000
vers 00000003
CPUID vers 0 rev 0
CPU(s): 1 x PA7000 at 50.000000 MHz
Searching for devices in PDC firmware... an older box...
Found devices:
1. Stinger Optional Graphics (10) at 0xf4000000, versions 0x6, 0x0,
0x77, 0x0, 0x0
2. Bushmaster Core BA (11) at 0xf082f000, versions 0x6, 0x0, 0x70, 0x0,
0x0
3. Bushmaster Core SCSI (10) at 0xf0825000, versions 0x6, 0x0, 0x71,
0x0, 0x0
4. Bushmaster Core LAN (802.3) (10) at 0xf0826000, versions 0x6, 0x0,
0x72, 0x0, 0x0
5. Bushmaster Core HIL (10) at 0xf0821000, versions 0x6, 0x0, 0x73, 0x0,
0x0
6. Bushmaster Core RS-232 (10) at 0xf0823000, versions 0x6, 0x0, 0x75,
0x0, 0x0
7. Bushmaster Core RS-232 (10) at 0xf0822000, versions 0x6, 0x0, 0x75,
0x0, 0x0
8. Bushmaster Core Centronics (10) at 0xf0824000, versions 0x6, 0x0,
0x74, 0x0, 0x0
9. Bushmaster Audio (10) at 0xf1000000, versions 0x6, 0x0, 0x7a, 0x0,
0x0
10. Bushmaster (710) (0) at 0xfffbe000, versions 0x300, 0x0, 0x4, 0x0,
0x81
11. Bushmaster (1) at 0xfffbf000, versions 0x16, 0x0, 0x9, 0x0, 0x0
That's a total of 11 devices.
Linux version 2.3.99-pre8 (bame@noam) (gcc version 2.96 20000707
(experimental)) #24 Fri Aug 4 18:27:58 MDT 2000
initrd: 00000000-00000000
pagetable_init
On node 0 totalpages: 16384
zone(0): 8192 pages.
zone(1): 8192 pages.
zone(2): 0 pages.
trap_init
Calibrating delay loop... 46.08 BogoMIPS
Memory: 61380k available
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
kmem_create: Poisoning requested, but con given - bdev_cache
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
kmem_create: Poisoning requested, but con given - inode_cache
POSIX conformance testing by UNIFIX
ASP version 1 at 0xf0800000 found.
request_irq(259, c01ec76c, 0x0, asp, c3fcd080)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [parisc-linux] Bug report
2000-09-08 18:54 [parisc-linux] Bug report Robert Stickel
@ 2000-09-11 12:04 ` Richard Hirst
0 siblings, 0 replies; 2+ messages in thread
From: Richard Hirst @ 2000-09-11 12:04 UTC (permalink / raw)
To: Robert Stickel; +Cc: parisc-linux
My 715/75 hangs there if CONFIG_PARPORT_GSC is enabled. Don't know if that
was turned on on the CD kernel, but it probably was (defaults to on).
Richard
On Fri, Sep 08, 2000 at 06:54:38PM +0000, Robert Stickel wrote:
>
> Hello,
>
> The good news: We are really excited about the Puffin project.
>
> The bad news: We tried to boot an Apollo 9000/710 on your PA/Linux
> Developer's
> Release CD, Version 0.1 - Snapshot 2000/08/04 and never quite got to a
> root
> prompt (see transcript below). Should this be possible or are we
> missing
> something?
>
> Thanks for any advice,
>
> rstickel@mindspring.com
> sts@minitower.gtri.gatech.edu
>
>
>
>
> Transcript of attempt to boot Apollo 9000/710 on Puffin CD. At the
> request_irq(259, c01ec76c, 0x0, asp, c3fcd080)
> line the systems hangs.
>
>
>
> (c) Copyright. Hewlett-Packard Company. 1991.
> All rights reserved.
>
> PDC ROM rev. 2.0
> IODC ROM rev. 2.0
> 64 MB of memory configured and tested.
>
>
> Selecting a system to boot.
> To stop selection process, press and hold the ESCAPE key.
>
> Selection process stopped.
>
> Searching for Potential Boot Devices.
> To terminate search, press and hold the ESCAPE key.
>
> Device Selection Device Path Device Type
> ----------------------------------------------------------------------------
>
> P0 scsi.6.0 MATSHITACD-ROM CR-8005A
> P1 scsi.5.0 IOMEGA ZIP 100
> P2 scsi.4.0 iomega jaz 1GB
> P3 scsi.3.0 SEAGATE ST11200N SUN1.05
> P4 scsi.2.0 SEAGATE ST31230N
> P5 scsi.1.0 IBM 0662
>
>
>
> b) Boot from specified device
> s) Search for bootable devices
> a) Enter Boot Administration mode
> x) Exit and continue boot sequence
> ?) Help
>
> Select from menu: a
> BOOT_ADMIN> info
> ----------------------------- Hardware Configuration
> ------------------------
>
> Machine model: 9000/710
>
> Processor Frequency = 50000000 Hz
> I/O Subsystem Frequency = 25000000 Hz
>
> LAN Jumper Status: Internal ThinLAN Port selected
>
> Processor Revision = 3
> System Controller Revision = 0
> Floating Point Coprocessor Revision = 3
>
> Hardware Version 12288 (0x00003000)
> Software Version 1153 (0x00000481)
>
> BOOT_ADMIN> boot alt
>
> Trying scsi.6.0
> Boot path initialized.
> Attempting to load IPL.
>
>
> Hard booted.
> palo ipl bame@noam Fri Aug 4 18:36:35 MDT 2000
> 0/vmlinux 2349352 bytes @ 0x6e8800
> 0/palo-cmdline '0/vmlinux TERM=linux HOME=/ root=/dev/scd0'
> Kernel: partition 0 file /vmlinux
> ELF32 executable
>
> Entry 00100000 first 00100000 n 4
> Segment 0 load 00100000 size 1511580 mediaptr 0x1000
> Segment 1 load 00272000 size 132368 mediaptr 0x173000
> Segment 2 load 00294000 size 86880 mediaptr 0x194000
> Segment 3 load 002ac000 size 8192 mediaptr 0x1aa000
> branching to kernel entry point 0x00100000
> pdc_cons registered !
> The Kernel has started...
> Free memory starts at: 0xc02dc000
> PALO command line: 'TERM=linux HOME=/ root=/dev/scd0'
> PALO initrd 0-0
> FP CCR was 0x0, will be set to 0xc0
> model 00003000 00000481 00000000 00000000 78243572 00000000 00000004
> 0000000d 00000000
> vers 00000003
> CPUID vers 0 rev 0
> CPU(s): 1 x PA7000 at 50.000000 MHz
> Searching for devices in PDC firmware... an older box...
> Found devices:
> 1. Stinger Optional Graphics (10) at 0xf4000000, versions 0x6, 0x0,
> 0x77, 0x0, 0x0
> 2. Bushmaster Core BA (11) at 0xf082f000, versions 0x6, 0x0, 0x70, 0x0,
> 0x0
> 3. Bushmaster Core SCSI (10) at 0xf0825000, versions 0x6, 0x0, 0x71,
> 0x0, 0x0
> 4. Bushmaster Core LAN (802.3) (10) at 0xf0826000, versions 0x6, 0x0,
> 0x72, 0x0, 0x0
> 5. Bushmaster Core HIL (10) at 0xf0821000, versions 0x6, 0x0, 0x73, 0x0,
> 0x0
> 6. Bushmaster Core RS-232 (10) at 0xf0823000, versions 0x6, 0x0, 0x75,
> 0x0, 0x0
> 7. Bushmaster Core RS-232 (10) at 0xf0822000, versions 0x6, 0x0, 0x75,
> 0x0, 0x0
> 8. Bushmaster Core Centronics (10) at 0xf0824000, versions 0x6, 0x0,
> 0x74, 0x0, 0x0
> 9. Bushmaster Audio (10) at 0xf1000000, versions 0x6, 0x0, 0x7a, 0x0,
> 0x0
> 10. Bushmaster (710) (0) at 0xfffbe000, versions 0x300, 0x0, 0x4, 0x0,
> 0x81
> 11. Bushmaster (1) at 0xfffbf000, versions 0x16, 0x0, 0x9, 0x0, 0x0
> That's a total of 11 devices.
> Linux version 2.3.99-pre8 (bame@noam) (gcc version 2.96 20000707
> (experimental)) #24 Fri Aug 4 18:27:58 MDT 2000
> initrd: 00000000-00000000
> pagetable_init
> On node 0 totalpages: 16384
> zone(0): 8192 pages.
> zone(1): 8192 pages.
> zone(2): 0 pages.
> trap_init
> Calibrating delay loop... 46.08 BogoMIPS
> Memory: 61380k available
> Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
> kmem_create: Poisoning requested, but con given - bdev_cache
> Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
> kmem_create: Poisoning requested, but con given - inode_cache
> POSIX conformance testing by UNIFIX
> ASP version 1 at 0xf0800000 found.
> request_irq(259, c01ec76c, 0x0, asp, c3fcd080)
>
> ---------------------------------------------------------------------------
> To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with
> `unsubscribe' as the subject.
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2000-09-11 12:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-09-08 18:54 [parisc-linux] Bug report Robert Stickel
2000-09-11 12:04 ` Richard Hirst
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.