* Re: [parisc-linux] sti console problem
@ 2001-07-10 13:55 awyatt
2001-07-10 14:33 ` Richard Hirst
0 siblings, 1 reply; 8+ messages in thread
From: awyatt @ 2001-07-10 13:55 UTC (permalink / raw)
To: parisc-linux
Is the Fast Wide controller on the 735 supported yet? I attempted to
install .9 and it seemed to find a controller, and error out then it
did not find any of my drives .. (I did have a CDROM and a 1GB drive
on the narrow controller, but I have 10GB that I'd like to use also
heh)
Andrew
> Original Message from Tue, 10 Jul 2001 14:37:49 0100:>
> On Mon, Jul 09, 2001 at 04:09:02PM 0200, Matthieu Le Corre wrote:
> > i got a 735 appollo series ,with 0.9 iso installed
> > i've installed sti kernel all work execpt that i get an 'unable
to open
> > initial console " all right seems to be good
> > don't undestand why it failed ,
> > need help !!!
>
> From it appears that STI console
> has not been tested on 735. Can you try a serial console install?
>
> When you say "all work" do you mean the installer ran and let you
> install the system? At which point did you get "unable to open
> initial console"? During the initial boot from CD, during the
> reboot in to the second stage install, or after that, when booting
> in to the installed system?
>
>
> Richard
>
>
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
>
>
>
_______________________________________________________________________________
This E-Mail was sent with MailMax/WEB.
http://www.smartmax.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [parisc-linux] sti console problem
@ 2001-07-10 14:14 Matthieu Le Corre
0 siblings, 0 replies; 8+ messages in thread
From: Matthieu Le Corre @ 2001-07-10 14:14 UTC (permalink / raw)
To: parisc-linux
---------- Message transmis ----------
Subject: Re: [parisc-linux] sti console problem
Date: Tue, 10 Jul 2001 16:09:28 +0200
From: Matthieu Le Corre <matthieu.lecorre@polytech.univ-nantes.fr>
To: awyatt@intergate.cx
the Fast Wide controller on the 735 is noy suppoerted yet .... :(
i install .9 in a external narrow drive ...
Le Mardi 10 Juillet 2001 15:55, vous avez écrit :
> Is the Fast Wide controller on the 735 supported yet? I attempted to
> install .9 and it seemed to find a controller, and error out then it
> did not find any of my drives .. (I did have a CDROM and a 1GB drive
> on the narrow controller, but I have 10GB that I'd like to use also
> heh)
>
> Andrew
>
> > Original Message from Tue, 10 Jul 2001 14:37:49 0100:>
> >
> > On Mon, Jul 09, 2001 at 04:09:02PM 0200, Matthieu Le Corre wrote:
> > > i got a 735 appollo series ,with 0.9 iso installed
> > > i've installed sti kernel all work execpt that i get an 'unable
>
> to open
>
> > > initial console " all right seems to be good
> > > don't undestand why it failed ,
> > > need help !!!
> >
> > From it appears that STI console
> > has not been tested on 735. Can you try a serial console install?
> >
> > When you say "all work" do you mean the installer ran and let you
> > install the system? At which point did you get "unable to open
> > initial console"? During the initial boot from CD, during the
> > reboot in to the second stage install, or after that, when booting
> > in to the installed system?
> >
> >
> > Richard
> >
> >
> >
> > _______________________________________________
> > parisc-linux mailing list
> > parisc-linux@lists.parisc-linux.org
> > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
>
> ___________________________________________________________________________
>____ This E-Mail was sent with MailMax/WEB.
> http://www.smartmax.com
>
>
>
>
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
--
_______________________________________
Matthieu Le Corre
Service informatique
Ecole Polytechnique de l'Université de Nantes
Matthieu.Lecorre@polytech.univ-nantes.fr
02.40.68.32.23
_______________________________________
-------------------------------------------------------
--
_______________________________________
Matthieu Le Corre
Service informatique
Ecole Polytechnique de l'Université de Nantes
Matthieu.Lecorre@polytech.univ-nantes.fr
02.40.68.32.23
_______________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread* [parisc-linux] sti console problem
@ 2001-07-09 14:09 Matthieu Le Corre
2001-07-10 13:37 ` Richard Hirst
0 siblings, 1 reply; 8+ messages in thread
From: Matthieu Le Corre @ 2001-07-09 14:09 UTC (permalink / raw)
To: parisc-linux
i got a 735 appollo series ,with 0.9 iso installed
i've installed sti kernel all work execpt that i get an 'unable to open
initial console " all right seems to be good
don't undestand why it failed ,
need help !!!
--
_______________________________________
Matthieu Le Corre
Service informatique
Ecole Polytechnique de l'Université de Nantes
Matthieu.Lecorre@polytech.univ-nantes.fr
02.40.68.32.23
_______________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [parisc-linux] sti console problem
2001-07-09 14:09 Matthieu Le Corre
@ 2001-07-10 13:37 ` Richard Hirst
2001-07-10 14:06 ` Matthieu Le Corre
0 siblings, 1 reply; 8+ messages in thread
From: Richard Hirst @ 2001-07-10 13:37 UTC (permalink / raw)
To: Matthieu Le Corre; +Cc: parisc-linux
On Mon, Jul 09, 2001 at 04:09:02PM +0200, Matthieu Le Corre wrote:
> i got a 735 appollo series ,with 0.9 iso installed
> i've installed sti kernel all work execpt that i get an 'unable to open
> initial console " all right seems to be good
> don't undestand why it failed ,
> need help !!!
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [parisc-linux] sti console problem
2001-07-10 13:37 ` Richard Hirst
@ 2001-07-10 14:06 ` Matthieu Le Corre
2001-07-10 14:45 ` Richard Hirst
0 siblings, 1 reply; 8+ messages in thread
From: Matthieu Le Corre @ 2001-07-10 14:06 UTC (permalink / raw)
To: parisc-linux
in fact i've installed the 0.9 iso from the serial console
first and second stage are correct !
it boot correctly , but,
at the end of booting process ,
in sti console i get an "unable to open initial" console...
and then a login appears in serial console !
in fact all boot message appears un sti console execpt the boot prompt !
I have check inittab and /dev/tty* files , they seems ok ! i don't understand
Le Mardi 10 Juillet 2001 15:37, vous avez écrit :
> On Mon, Jul 09, 2001 at 04:09:02PM +0200, Matthieu Le Corre wrote:
> > i got a 735 appollo series ,with 0.9 iso installed
> > i've installed sti kernel all work execpt that i get an 'unable to open
> > initial console " all right seems to be good
> > don't undestand why it failed ,
> > need help !!!
>
> From <http://mkhppa1.esiee.fr/list.html> it appears that STI console
> has not been tested on 735. Can you try a serial console install?
>
> When you say "all work" do you mean the installer ran and let you
> install the system? At which point did you get "unable to open
> initial console"? During the initial boot from CD, during the
> reboot in to the second stage install, or after that, when booting
> in to the installed system?
>
>
> Richard
>
>
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
--
_______________________________________
Matthieu Le Corre
Service informatique
Ecole Polytechnique de l'Université de Nantes
Matthieu.Lecorre@polytech.univ-nantes.fr
02.40.68.32.23
_______________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [parisc-linux] sti console problem
2001-07-10 14:06 ` Matthieu Le Corre
@ 2001-07-10 14:45 ` Richard Hirst
2001-07-10 15:28 ` Matthieu Le Corre
0 siblings, 1 reply; 8+ messages in thread
From: Richard Hirst @ 2001-07-10 14:45 UTC (permalink / raw)
To: Matthieu Le Corre; +Cc: parisc-linux
On Tue, Jul 10, 2001 at 04:06:11PM +0200, Matthieu Le Corre wrote:
> in fact i've installed the 0.9 iso from the serial console
> first and second stage are correct !
> it boot correctly , but,
> at the end of booting process ,
> in sti console i get an "unable to open initial" console...
> and then a login appears in serial console !
> in fact all boot message appears un sti console execpt the boot prompt !
> I have check inittab and /dev/tty* files , they seems ok ! i don't understand
For 0.9 we had different ISOs for 32 bit STI console and 32 bit
serial console. It sounds as though you might have booted
the STI ISO, but used a serial console. You get the login prompt
on the serial console, because that is where inittab starts a
getty. Sounds like kernel printk output is displayed on the STI
console, sugests you are using the STI kernel. Not sure about
this though... Check the kernel boot params; do you have
console=tty0 or console=ttyS0?
You can try the 0.9.1 CD from http://mkhppa1.esiee.fr which should
auto-detect which console you used and route messages appropriately.
Richard
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [parisc-linux] sti console problem
2001-07-10 14:45 ` Richard Hirst
@ 2001-07-10 15:28 ` Matthieu Le Corre
0 siblings, 0 replies; 8+ messages in thread
From: Matthieu Le Corre @ 2001-07-10 15:28 UTC (permalink / raw)
To: parisc-linux
Le Mardi 10 Juillet 2001 16:45, vous avez écrit :
> On Tue, Jul 10, 2001 at 04:06:11PM +0200, Matthieu Le Corre wrote:
> > in fact i've installed the 0.9 iso from the serial console
> > first and second stage are correct !
> > it boot correctly , but,
> > at the end of booting process ,
> > in sti console i get an "unable to open initial" console...
> > and then a login appears in serial console !
> > in fact all boot message appears un sti console execpt the boot prompt !
> > I have check inittab and /dev/tty* files , they seems ok ! i don't
> > understand
>
> For 0.9 we had different ISOs for 32 bit STI console and 32 bit
> serial console. It sounds as though you might have booted
> the STI ISO, but used a serial console. You get the login prompt
> on the serial console, because that is where inittab starts a
> getty. Sounds like kernel printk output is displayed on the STI
> console, sugests you are using the STI kernel. Not sure about
> this though... Check the kernel boot params; do you have
> console=tty0 or console=ttyS0?
i've install FROM serial iso BUT i've installed the sti kernel
and i've paramater console=tty0 ;(
i've made both serial and sti start from inittab ....
the sti console seem to work but the only think is i don't get login prompt
on sti.
but when i shutdown system message appears on sti console !
i've try 0.9.1 but it failed after "branching kernel" despite a good md5sum
...
> You can try the 0.9.1 CD from http://mkhppa1.esiee.fr which should
> auto-detect which console you used and route messages appropriately.
>
>
> Richard
>
>
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
--
_______________________________________
Matthieu Le Corre
Service informatique
Ecole Polytechnique de l'Université de Nantes
Matthieu.Lecorre@polytech.univ-nantes.fr
02.40.68.32.23
_______________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2001-07-10 15:22 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-07-10 13:55 [parisc-linux] sti console problem awyatt
2001-07-10 14:33 ` Richard Hirst
-- strict thread matches above, loose matches on Subject: below --
2001-07-10 14:14 Matthieu Le Corre
2001-07-09 14:09 Matthieu Le Corre
2001-07-10 13:37 ` Richard Hirst
2001-07-10 14:06 ` Matthieu Le Corre
2001-07-10 14:45 ` Richard Hirst
2001-07-10 15:28 ` Matthieu Le Corre
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.