From: Cliff Albert <cliff@oisec.net>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Yusuf Goolamabbas <yusufg@outblaze.com>,
linux-kernel@vger.kernel.org, gibbs@scsiguy.com
Subject: Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo
Date: Mon, 20 Aug 2001 18:21:38 +0200 [thread overview]
Message-ID: <20010820182138.C26054@oisec.net> (raw)
In-Reply-To: <20010820105520.A22087@oisec.net> <E15YmR3-0005mb-00@the-village.bc.nu>
In-Reply-To: <E15YmR3-0005mb-00@the-village.bc.nu>
On Mon, Aug 20, 2001 at 11:37:33AM +0100, Alan Cox wrote:
> > > With 2.4.8-ac7, I get SCSI errors and the kernel fails to boot. If I
> > > compile with APIC enabled and APIC on UP also enabled, it boots
> > > cleanly
> >
> > I'm getting similair errors on 2.4.8-ac7 on my P2B-S motherboard using
> > the NEW AIC7xxx driver, the old isn't experiencing these problems. Further
> > i've been getting these errors since 2.4.3.
>
> There is a known BIOS irq routing table problem with a large number of Intel
> BIOS boards with onboard adaptec controllers. The fact that making it use
> the io-apic works suggest this is the same thing.
It's an ASUS P2B-S board with a Award Bios, flashed to the latest revision that
is available from ASUS
--
Cliff Albert | RIPE: CA3348-RIPE | www.oisec.net
cliff@oisec.net | 6BONE: CA2-6BONE | icq 18461740
next prev parent reply other threads:[~2001-08-20 16:21 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-08-20 8:36 aic7xxx errors with 2.4.8-ac7 on 440gx mobo Yusuf Goolamabbas
2001-08-20 8:55 ` Cliff Albert
2001-08-20 10:37 ` Alan Cox
2001-08-20 10:56 ` Yusuf Goolamabbas
2001-08-20 10:56 ` Alan Cox
2001-08-20 11:13 ` Yusuf Goolamabbas
2001-08-20 11:09 ` Alan Cox
2001-08-20 16:43 ` Doug Ledford
2001-08-20 12:46 ` Stefan Fleiter
2001-08-20 15:19 ` Ville Herva
2001-08-20 20:33 ` Justin T. Gibbs
2001-08-20 16:45 ` Doug Ledford
2001-08-20 17:23 ` Stefan Fleiter
2001-08-20 20:28 ` Justin T. Gibbs
2001-08-21 20:24 ` Stefan Fleiter
2001-08-20 16:21 ` Cliff Albert [this message]
2001-08-20 17:23 ` Peter T. Breuer
2001-08-20 17:28 ` Cliff Albert
2001-08-20 20:27 ` Justin T. Gibbs
2001-08-20 20:45 ` Cliff Albert
2001-08-20 21:04 ` Cliff Albert
2001-08-20 21:09 ` Cliff Albert
2001-08-20 21:45 ` Justin T. Gibbs
2001-08-20 22:36 ` aic7xxx with 2.4.9 on 7899P Sven Heinicke
2001-08-21 14:42 ` With Daniel Phillips Patch (was: aic7xxx with 2.4.9 on 7899P) Sven Heinicke
2001-08-21 15:08 ` Daniel Phillips
2001-08-21 16:48 ` Sven Heinicke
2001-08-21 17:18 ` Justin T. Gibbs
2001-08-21 22:49 ` Sven Heinicke
2001-08-22 13:06 ` Gérard Roudier
2001-08-21 17:26 ` Daniel Phillips
2001-08-21 17:55 ` Stephan von Krawczynski
2001-08-21 18:33 ` Justin T. Gibbs
2001-08-22 6:46 ` Jens Axboe
2001-08-22 13:24 ` Justin T. Gibbs
2001-08-22 15:05 ` With Daniel Phillips Patch David S. Miller
2001-08-22 18:21 ` Gérard Roudier
2001-08-22 18:32 ` David S. Miller
2001-08-22 18:32 ` Justin T. Gibbs
2001-08-22 18:46 ` David S. Miller
2001-08-22 19:41 ` Justin T. Gibbs
2001-08-22 20:19 ` David S. Miller
2001-08-22 21:07 ` Gérard Roudier
2001-08-22 21:14 ` David S. Miller
2001-08-22 21:14 ` David S. Miller
2001-08-22 21:40 ` Justin T. Gibbs
2001-08-22 23:09 ` David S. Miller
2001-08-23 0:01 ` Justin T. Gibbs
2001-08-23 0:40 ` David S. Miller
2001-08-23 0:55 ` Justin T. Gibbs
2001-08-23 1:03 ` Matthew Jacob
2001-08-23 1:08 ` David S. Miller
2001-08-23 1:32 ` Justin T. Gibbs
2001-08-23 1:39 ` David S. Miller
2001-08-23 1:49 ` Justin T. Gibbs
2001-08-21 22:44 ` With Daniel Phillips Patch (was: aic7xxx with 2.4.9 on 7899P) Sven Heinicke
2001-08-22 0:58 ` Daniel Phillips
2001-08-22 10:25 ` Marcelo Tosatti
2001-08-22 16:09 ` Sven Heinicke
2001-08-22 15:42 ` Marcelo Tosatti
2001-08-22 20:25 ` Sven Heinicke
2001-08-29 7:30 ` Andrey Nekrasov
2001-09-03 14:58 ` Marcelo Tosatti
2001-08-20 22:55 ` aic7xxx errors with 2.4.8-ac7 on 440gx mobo Cliff Albert
2001-08-21 0:36 ` Justin T. Gibbs
2001-08-21 15:34 ` Gérard Roudier
2001-08-20 21:44 ` Justin T. Gibbs
2001-08-20 21:48 ` Cliff Albert
2001-08-25 7:15 ` Cliff Albert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010820182138.C26054@oisec.net \
--to=cliff@oisec.net \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=gibbs@scsiguy.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yusufg@outblaze.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.