From: greg@kroah.com (Greg KH)
To: Jonas Munsin <jmunsin@iki.fi>, Jean Delvare <khali@linux-fr.org>,
pioppo@ferrara.linux.it, sensors@Stimpy.netroedge.com,
djg@pdp8.net, LKML <linux-kernel@vger.kernel.org>
Subject: 2.6.10-mm2: it87 sensor driver stops CPU fan
Date: Thu, 19 May 2005 06:25:30 +0000 [thread overview]
Message-ID: <20050111224130.GA19173@kroah.com> (raw)
In-Reply-To: <20050111202437.GA2914@nemo.sby.abo.fi>
On Tue, Jan 11, 2005 at 10:24:38PM +0200, Jonas Munsin wrote:
> On Tue, Jan 11, 2005 at 10:26:22AM +0100, Jean Delvare wrote:
> > 1* Jonas, please send a modified version of your original patch to Greg.
> > The only difference would be that you wouldn't force on/off mode to be
> > on at driver load time. Instead, disabling PWM for one fan control
> > output (echo 0 > pwmN_enable) would both set on/off mode to on for that
> > output (new) and turn that output to on/off mode (same as before).
>
> Ok, thanks for doing the thinking ;), here is the modified patch
> (it87.c_2.6.10-jm3-corrected_manual_pwm_20050111.diff). In addition to
> the above change, it also refreshes fan_main_ctrl in the update routine,
> as suggested by Jean on IRC.
>
> - adds manual PWM
> - removes buggy "reset" module parameter
> - fixes some whitespaces
Applied, thanks.
greg k-h
WARNING: multiple messages have this Message-ID (diff)
From: Greg KH <greg@kroah.com>
To: Jonas Munsin <jmunsin@iki.fi>, Jean Delvare <khali@linux-fr.org>,
pioppo@ferrara.linux.it, sensors@Stimpy.netroedge.com,
djg@pdp8.net, LKML <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.10-mm2: it87 sensor driver stops CPU fan
Date: Tue, 11 Jan 2005 14:41:30 -0800 [thread overview]
Message-ID: <20050111224130.GA19173@kroah.com> (raw)
In-Reply-To: <20050111202437.GA2914@nemo.sby.abo.fi>
On Tue, Jan 11, 2005 at 10:24:38PM +0200, Jonas Munsin wrote:
> On Tue, Jan 11, 2005 at 10:26:22AM +0100, Jean Delvare wrote:
> > 1* Jonas, please send a modified version of your original patch to Greg.
> > The only difference would be that you wouldn't force on/off mode to be
> > on at driver load time. Instead, disabling PWM for one fan control
> > output (echo 0 > pwmN_enable) would both set on/off mode to on for that
> > output (new) and turn that output to on/off mode (same as before).
>
> Ok, thanks for doing the thinking ;), here is the modified patch
> (it87.c_2.6.10-jm3-corrected_manual_pwm_20050111.diff). In addition to
> the above change, it also refreshes fan_main_ctrl in the update routine,
> as suggested by Jean on IRC.
>
> - adds manual PWM
> - removes buggy "reset" module parameter
> - fixes some whitespaces
Applied, thanks.
greg k-h
next prev parent reply other threads:[~2005-05-19 6:25 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-08 0:50 2.6.10-mm2: it87 sensor driver stops CPU fan Simone Piunno
2005-01-08 9:34 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-01-10 22:41 ` Simone Piunno
2005-05-19 6:25 ` Simone Piunno
2005-01-11 9:26 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-01-11 20:24 ` Jonas Munsin
2005-05-19 6:25 ` Jonas Munsin
2005-01-11 20:56 ` Jean Delvare
2005-01-11 22:41 ` Greg KH [this message]
2005-05-19 6:25 ` Greg KH
2005-01-11 21:04 ` Simone Piunno
2005-01-12 9:44 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-01-12 22:27 ` Jonas Munsin
2005-05-19 6:25 ` Jonas Munsin
2005-01-13 23:29 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-01-14 14:40 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-01-15 15:30 ` [PATCH 2.6] I2C: Allow it87 pwm reconfiguration Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-01-15 17:18 ` Simone Piunno
2005-05-19 6:25 ` Simone Piunno
2005-01-19 23:23 ` Greg KH
2005-05-19 6:25 ` Greg KH
2005-01-15 15:54 ` 2.6.10-mm2: it87 sensor driver stops CPU fan Simone Piunno
2005-05-19 6:25 ` Simone Piunno
2005-01-15 16:55 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-01-16 22:32 ` Simone Piunno
2005-05-19 6:25 ` Simone Piunno
2005-01-17 19:19 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-01-17 19:37 ` 2.6 Series Mem Mgmt Chris Bookholt
2005-01-17 19:56 ` Brian Gerst
2005-01-08 16:20 ` 2.6.10-mm2: it87 sensor driver stops CPU fan Jean Delvare
2005-01-08 19:23 ` Simone Piunno
2005-05-19 6:25 ` Simone Piunno
2005-01-10 19:23 ` Simone Piunno
2005-05-19 6:25 ` Simone Piunno
2005-01-10 19:34 ` Jean Delvare
2005-01-19 20:19 ` Nicolas Pitre
2005-05-19 6:25 ` Nicolas Pitre
2005-01-19 20:52 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-01-19 22:10 ` Nicolas Pitre
2005-05-19 6:25 ` Nicolas Pitre
2005-01-20 11:08 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-01-20 16:01 ` Nicolas Pitre
2005-05-19 6:25 ` Nicolas Pitre
2005-01-20 16:28 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-01-20 21:19 ` Nicolas Pitre
2005-05-19 6:25 ` Nicolas Pitre
2005-01-21 6:46 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050111224130.GA19173@kroah.com \
--to=greg@kroah.com \
--cc=djg@pdp8.net \
--cc=jmunsin@iki.fi \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pioppo@ferrara.linux.it \
--cc=sensors@Stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.