[patch 25/44] ia64: use generic bitops

[Akinobu Mita <mita@miraclelinux.com>]

- remove __{,test_and_}{set,clear,change}_bit() and test_bit()
- remove generic_fls64()
- remove find_{next,first}{,_zero}_bit()
- remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit()
- remove minix_{test,set,test_and_clear,test,find_first_zero}_bit()
- remove sched_find_first_bit()

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
 arch/ia64/lib/Makefile    |    2 
 arch/ia64/lib/bitop.c     |   88 ------------------------
 include/asm-ia64/bitops.h |  168 ++++------------------------------------------
 3 files changed, 19 insertions(+), 239 deletions(-)

Index: 2.6-git/include/asm-ia64/bitops.h
=================================--- 2.6-git.orig/include/asm-ia64/bitops.h
+++ 2.6-git/include/asm-ia64/bitops.h
@@ -5,8 +5,8 @@
  * Copyright (C) 1998-2003 Hewlett-Packard Co
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  *
- * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64 O(1)
- *	    scheduler patch
+ * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64
+ * O(1) scheduler patch
  */
 
 #include <linux/compiler.h>
@@ -25,9 +25,9 @@
  * restricted to acting on a single-word quantity.
  *
  * The address must be (at least) "long" aligned.
- * Note that there are driver (e.g., eepro100) which use these operations to operate on
- * hw-defined data-structures, so we can't easily change these operations to force a
- * bigger alignment.
+ * Note that there are driver (e.g., eepro100) which use these operations to
+ * operate on hw-defined data-structures, so we can't easily change these
+ * operations to force a bigger alignment.
  *
  * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
  */
@@ -47,21 +47,6 @@ set_bit (int nr, volatile void *addr)
 	} while (cmpxchg_acq(m, old, new) != old);
 }
 
-/**
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void
-__set_bit (int nr, volatile void *addr)
-{
-	*((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31));
-}
-
 /*
  * clear_bit() has "acquire" semantics.
  */
@@ -95,17 +80,6 @@ clear_bit (int nr, volatile void *addr)
 }
 
 /**
- * __clear_bit - Clears a bit in memory (non-atomic version)
- */
-static __inline__ void
-__clear_bit (int nr, volatile void *addr)
-{
-	volatile __u32 *p = (__u32 *) addr + (nr >> 5);
-	__u32 m = 1 << (nr & 31);
-	*p &= ~m;
-}
-
-/**
  * change_bit - Toggle a bit in memory
  * @nr: Bit to clear
  * @addr: Address to start counting from
@@ -131,21 +105,6 @@ change_bit (int nr, volatile void *addr)
 }
 
 /**
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void
-__change_bit (int nr, volatile void *addr)
-{
-	*((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31));
-}
-
-/**
  * test_and_set_bit - Set a bit and return its old value
  * @nr: Bit to set
  * @addr: Address to count from
@@ -171,26 +130,6 @@ test_and_set_bit (int nr, volatile void 
 }
 
 /**
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.  
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static __inline__ int
-__test_and_set_bit (int nr, volatile void *addr)
-{
-	__u32 *p = (__u32 *) addr + (nr >> 5);
-	__u32 m = 1 << (nr & 31);
-	int oldbitset = (*p & m) != 0;
-
-	*p |= m;
-	return oldbitset;
-}
-
-/**
  * test_and_clear_bit - Clear a bit and return its old value
  * @nr: Bit to set
  * @addr: Address to count from
@@ -216,26 +155,6 @@ test_and_clear_bit (int nr, volatile voi
 }
 
 /**
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.  
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static __inline__ int
-__test_and_clear_bit(int nr, volatile void * addr)
-{
-	__u32 *p = (__u32 *) addr + (nr >> 5);
-	__u32 m = 1 << (nr & 31);
-	int oldbitset = *p & m;
-
-	*p &= ~m;
-	return oldbitset;
-}
-
-/**
  * test_and_change_bit - Change a bit and return its old value
  * @nr: Bit to set
  * @addr: Address to count from
@@ -260,32 +179,14 @@ test_and_change_bit (int nr, volatile vo
 	return (old & bit) != 0;
 }
 
-/*
- * WARNING: non atomic version.
- */
-static __inline__ int
-__test_and_change_bit (int nr, void *addr)
-{
-	__u32 old, bit = (1 << (nr & 31));
-	__u32 *m = (__u32 *) addr + (nr >> 5);
-
-	old = *m;
-	*m = old ^ bit;
-	return (old & bit) != 0;
-}
-
-static __inline__ int
-test_bit (int nr, const volatile void *addr)
-{
-	return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31));
-}
+#include <asm-generic/bitops/non-atomic.h>
 
 /**
  * ffz - find the first zero bit in a long word
  * @x: The long word to find the bit in
  *
- * Returns the bit-number (0..63) of the first (least significant) zero bit.  Undefined if
- * no zero exists, so code should check against ~0UL first...
+ * Returns the bit-number (0..63) of the first (least significant) zero bit.
+ * Undefined if no zero exists, so code should check against ~0UL first...
  */
 static inline unsigned long
 ffz (unsigned long x)
@@ -345,13 +246,14 @@ fls (int t)
 	x |= x >> 16;
 	return ia64_popcnt(x);
 }
-#define fls64(x)   generic_fls64(x)
+
+#include <asm-generic/bitops/fls64.h>
 
 /*
- * ffs: find first bit set. This is defined the same way as the libc and compiler builtin
- * ffs routines, therefore differs in spirit from the above ffz (man ffs): it operates on
- * "int" values only and the result value is the bit number + 1.  ffs(0) is defined to
- * return zero.
+ * ffs: find first bit set. This is defined the same way as the libc and
+ * compiler builtin ffs routines, therefore differs in spirit from the above
+ * ffz (man ffs): it operates on "int" values only and the result value is the
+ * bit number + 1.  ffs(0) is defined to return zero.
  */
 #define ffs(x)	__builtin_ffs(x)
 
@@ -373,51 +275,17 @@ hweight64 (unsigned long x)
 
 #endif /* __KERNEL__ */
 
-extern int __find_next_zero_bit (const void *addr, unsigned long size,
-			unsigned long offset);
-extern int __find_next_bit(const void *addr, unsigned long size,
-			unsigned long offset);
-
-#define find_next_zero_bit(addr, size, offset) \
-			__find_next_zero_bit((addr), (size), (offset))
-#define find_next_bit(addr, size, offset) \
-			__find_next_bit((addr), (size), (offset))
-
-/*
- * The optimizer actually does good code for this case..
- */
-#define find_first_zero_bit(addr, size) find_next_zero_bit((addr), (size), 0)
-
-#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
+#include <asm-generic/bitops/find.h>
 
 #ifdef __KERNEL__
 
-#define __clear_bit(nr, addr)		clear_bit(nr, addr)
+#include <asm-generic/bitops/ext2-non-atomic.h>
 
-#define ext2_set_bit			__test_and_set_bit
 #define ext2_set_bit_atomic(l,n,a)	test_and_set_bit(n,a)
-#define ext2_clear_bit			__test_and_clear_bit
 #define ext2_clear_bit_atomic(l,n,a)	test_and_clear_bit(n,a)
-#define ext2_test_bit			test_bit
-#define ext2_find_first_zero_bit	find_first_zero_bit
-#define ext2_find_next_zero_bit		find_next_zero_bit
-
-/* Bitmap functions for the minix filesystem.  */
-#define minix_test_and_set_bit(nr,addr)		__test_and_set_bit(nr,addr)
-#define minix_set_bit(nr,addr)			__set_bit(nr,addr)
-#define minix_test_and_clear_bit(nr,addr)	__test_and_clear_bit(nr,addr)
-#define minix_test_bit(nr,addr)			test_bit(nr,addr)
-#define minix_find_first_zero_bit(addr,size)	find_first_zero_bit(addr,size)
 
-static inline int
-sched_find_first_bit (unsigned long *b)
-{
-	if (unlikely(b[0]))
-		return __ffs(b[0]);
-	if (unlikely(b[1]))
-		return 64 + __ffs(b[1]);
-	return __ffs(b[2]) + 128;
-}
+#include <asm-generic/bitops/minix.h>
+#include <asm-generic/bitops/sched.h>
 
 #endif /* __KERNEL__ */
 
Index: 2.6-git/arch/ia64/lib/Makefile
=================================--- 2.6-git.orig/arch/ia64/lib/Makefile
+++ 2.6-git/arch/ia64/lib/Makefile
@@ -6,7 +6,7 @@ obj-y := io.o
 
 lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o			\
 	__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o			\
-	bitop.o checksum.o clear_page.o csum_partial_copy.o		\
+	checksum.o clear_page.o csum_partial_copy.o			\
 	clear_user.o strncpy_from_user.o strlen_user.o strnlen_user.o	\
 	flush.o ip_fast_csum.o do_csum.o				\
 	memset.o strlen.o
Index: 2.6-git/arch/ia64/lib/bitop.c
=================================--- 2.6-git.orig/arch/ia64/lib/bitop.c
+++ /dev/null
@@ -1,88 +0,0 @@
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm/intrinsics.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
-
-/*
- * Find next zero bit in a bitmap reasonably efficiently..
- */
-
-int __find_next_zero_bit (const void *addr, unsigned long size, unsigned long offset)
-{
-	unsigned long *p = ((unsigned long *) addr) + (offset >> 6);
-	unsigned long result = offset & ~63UL;
-	unsigned long tmp;
-
-	if (offset >= size)
-		return size;
-	size -= result;
-	offset &= 63UL;
-	if (offset) {
-		tmp = *(p++);
-		tmp |= ~0UL >> (64-offset);
-		if (size < 64)
-			goto found_first;
-		if (~tmp)
-			goto found_middle;
-		size -= 64;
-		result += 64;
-	}
-	while (size & ~63UL) {
-		if (~(tmp = *(p++)))
-			goto found_middle;
-		result += 64;
-		size -= 64;
-	}
-	if (!size)
-		return result;
-	tmp = *p;
-found_first:
-	tmp |= ~0UL << size;
-	if (tmp = ~0UL)		/* any bits zero? */
-		return result + size;	/* nope */
-found_middle:
-	return result + ffz(tmp);
-}
-EXPORT_SYMBOL(__find_next_zero_bit);
-
-/*
- * Find next bit in a bitmap reasonably efficiently..
- */
-int __find_next_bit(const void *addr, unsigned long size, unsigned long offset)
-{
-	unsigned long *p = ((unsigned long *) addr) + (offset >> 6);
-	unsigned long result = offset & ~63UL;
-	unsigned long tmp;
-
-	if (offset >= size)
-		return size;
-	size -= result;
-	offset &= 63UL;
-	if (offset) {
-		tmp = *(p++);
-		tmp &= ~0UL << offset;
-		if (size < 64)
-			goto found_first;
-		if (tmp)
-			goto found_middle;
-		size -= 64;
-		result += 64;
-	}
-	while (size & ~63UL) {
-		if ((tmp = *(p++)))
-			goto found_middle;
-		result += 64;
-		size -= 64;
-	}
-	if (!size)
-		return result;
-	tmp = *p;
-  found_first:
-	tmp &= ~0UL >> (64-size);
-	if (tmp = 0UL)		/* Are any bits set? */
-		return result + size; /* Nope. */
-  found_middle:
-	return result + __ffs(tmp);
-}
-EXPORT_SYMBOL(__find_next_bit);

--