* a couple of oopses with 2.6.14
@ 2006-02-09 18:34 Bernd Schubert
2006-02-09 23:27 ` Andrew Morton
0 siblings, 1 reply; 11+ messages in thread
From: Bernd Schubert @ 2006-02-09 18:34 UTC (permalink / raw)
To: Linux Kernel ML
Hi,
here's a machine that works perfectly with 2.6.11, but gives oopes during the
boot process with 2.6.14. Unfortunately its everytime another oops. Usually I
would assume its a memory issue, but the machine really works perfectly with
2.6.11.
We will run a memory test over the weekend, but so far I don't believe it will
find anything.
------------- example 1 ------------------------------------------------------
[4294676.669000] scsi0 : ata_piix
[4294676.831000] ATA: abnormal status 0x7F on port 0xE407
[4294676.831000] scsi1 : ata_piix
[4294676.833000] scheduling while atomic: ksoftirqd/0/0x00000101/3
[4294676.833000] [<c03feddf>] schedule+0xcff/0xd10
[4294676.833000] [<c011af27>] complete+0x27/0x40
[4294676.833000] [<c03ffd27>] __down+0x87/0xf0
[4294676.833000] [<c011adc0>] default_wake_function+0x0/0x20
[4294676.833000] [<c03fdce0>] klist_release+0x0/0x50
[4294676.833000] [<c023734a>] kref_put+0x2a/0x80
[4294676.833000] [<c03fe07f>] __down_failed+0x7/0xc
[4294676.833000] [<c02aaad6>] .text.lock.main+0x28/0x42
[4294676.833000] [<c02a6585>] device_del+0x35/0x60
[4294676.833000] [<c031edf6>] scsi_target_reap+0x86/0xb0
[4294676.833000] [<c03206f7>] scsi_device_dev_release+0xc7/0x120
[4294676.833000] [<c02a6165>] device_release+0x45/0x50
[4294676.833000] [<c0236a97>] kobject_cleanup+0x67/0x70
[4294676.833000] [<c0236aa0>] kobject_release+0x0/0x10
[4294676.833000] [<c023734a>] kref_put+0x2a/0x80
[4294676.833000] [<c0236ac6>] kobject_put+0x16/0x20
[4294676.833000] [<c0236aa0>] kobject_release+0x0/0x10
[4294676.834000] [<c031cf91>] scsi_next_command+0x11/0x20
[4294676.834000] [<c031d086>] scsi_end_request+0xa6/0xc0
[4294676.834000] [<c031d40a>] scsi_io_completion+0x22a/0x490
[4294676.834000] [<c031d899>] scsi_generic_done+0x29/0x40
[4294676.834000] [<c0318251>] scsi_finish_command+0x81/0xc0
[4294676.834000] [<c0318136>] scsi_softirq+0xc6/0x130
[4294676.834000] [<c0123dc6>] __do_softirq+0xc6/0xe0
[4294676.834000] [<c0123e15>] do_softirq+0x35/0x40
[4294676.834000] [<c0124319>] ksoftirqd+0x89/0x100
[4294676.834000] [<c0124290>] ksoftirqd+0x0/0x100
[4294676.834000] [<c0132337>] kthread+0xa7/0xb0
[4294676.834000] [<c0132290>] kthread+0x0/0xb0
[4294676.834000] [<c01010cd>] kernel_thread_helper+0x5/0x18
[4294676.834000] Unable to handle kernel NULL pointer dereference at virtual
address 00000000
[4294676.834000] printing eip:
[4294676.834000] c031ce82
[4294676.834000] *pde = 00000000
[4294676.834000] Oops: 0000 [#1]
[4294676.834000] PREEMPT SMP
[4294676.834000] Modules linked in:
[4294676.834000] CPU: 0
[4294676.834000] EIP: 0f20:[<c031ce82>] Not tainted VLI
[4294676.834000] EFLAGS: 00010246 (2.6.14.5-tc3)
[4294676.834000] EIP is at scsi_run_queue+0x12/0xc0
[4294676.834000] eax: 00000000 ebx: dfcddd9c ecx: dfd8009c edx: c0236aa0
[4294676.834000] esi: dfcd9c80 edi: dfcc9b84 ebp: 00000202 esp: c1da5ed0
[4294676.834000] ds: 0f3b es: 0f3b ss: 0f28
[4294676.834000] Process ksoftirqd/0 (pid: 3, threadinfo=c1da4000
task=c1d5aa50)
[4294676.834000] Stack: dfcc9b84 dfcddd9c dfcd9c80 dfcc9b84 00000202 c031d086
dfcc9b84 dfcddd9c
[4294676.834000] dfcd9c80 00000024 dfffe800 00000024 c031d40a dfcd9c80
00000000 00000024
[4294676.834000] 00000001 00000000 00000000 00000000 dfcc9b84 00000024
00040000 00000000
[4294676.834000] Call Trace:
[4294676.834000] [<c031d086>] scsi_end_request+0xa6/0xc0
[4294676.834000] [<c031d40a>] scsi_io_completion+0x22a/0x490
[4294676.834000] [<c031d899>] scsi_generic_done+0x29/0x40
[4294676.834000] [<c0318251>] scsi_finish_command+0x81/0xc0
[4294676.834000] [<c0318136>] scsi_softirq+0xc6/0x130
[4294676.834000] [<c0123dc6>] __do_softirq+0xc6/0xe0
[4294676.834000] [<c0123e15>] do_softirq+0x35/0x40
[4294676.834000] [<c0124319>] ksoftirqd+0x89/0x100
[4294676.834000] [<c0124290>] ksoftirqd+0x0/0x100
[4294676.834000] [<c0132337>] kthread+0xa7/0xb0
[4294676.834000] [<c0132290>] kthread+0x0/0xb0
[4294676.834000] [<c01010cd>]<7>ieee1394: Initialized config rom entry
`ip1394'
[4294676.834000] kernel_thread_helper+0x5/0x18
[4294676.834000] Code: 00 89 44 24 04 53 e8 <6>ieee1394: raw1394: /dev/raw1394
device initialized
[4294676.834000] 2e b6 ff <6>MC: drivers/edac/edac_mc.c version MC $Revision:
1.1.2.1 $
[4294676.834000] ff 58 5a eb aa 8d 76 00 8d bc 27 00 00 00 00 55 57 56 53 51
8b 44 24 18 89 04 24 8b 80 f8 00 00 00 <8b> 38 f6 80 7d 01 00 00 80 0f 85 87
00 00 00 <6>mice: PS/2 mouse device common for all mice
[4294676.834000] 8b 47 34 8d 6f 24
[4294676.834000] <0>Kernel panic - not syncing: Fatal exception in interrupt
[4294676.837000] [4294667.296000] Linux version 2.6.14.5-tc3
(bernd@hamilton1) (gcc version 3.3.5 (Debian 1:3.3.5
------------- example 2 ------------------------------------------------------
[4294708.516000] Unable to handle kernel paging request at virtual address
8d2311c4
[4294708.516000] printing eip:
[4294708.516000] c03fe70c
[4294708.516000] *pde = 00000000
[4294708.516000] Oops: 0000 [#1]
[4294708.516000] PREEMPT SMP
[4294708.516000] Modules linked in:
[4294708.516000] CPU: 1
[4294708.516000] EIP: 0f20:[<c03fe70c>] Not tainted VLI
[4294708.516000] EFLAGS: 00010083 (2.6.14.5-tc3)
[4294708.516000] EIP is at schedule+0x62c/0xd10
[4294667.296000] Linux version 2.6.14.5-tc3 (bernd@hamilton1) (gcc version
3.3.5 (Debian 1:3.3.5-13)) #3 SMP PREEM
------------- example 3 ------------------------------------------------------
[4294728.634000] Unable to handle kernel paging request------------[ cut
here ]------------
[4294728.634000] kernel BUG at arch/i386/mm/highmem.c:15!
[4294728.634000] invalid operand: 0000 [#1]
[4294728.634000] PREEMPT SMP
[4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
[4294728.634000] CPU: 1
[4294728.634000] EIP: 0f20:[<c0118644>] Not tainted VLI
[4294728.634000] EFLAGS: 00010206 (2.6.14.5-tc3)
[4294728.634000] EIP is at kunmap+0x14/0x40
[4294728.634000] eax: f75e2000 ebx: 0000003a ecx: c1beabc0 edx: ffffffff
[4294728.634000] esi: 0001ff39 edi: ff932eff ebp: 00000000 esp: f75e3f48
[4294728.634000] ds: 0f3b es: 0f3b ss: 0f28
[4294728.634000] Process net.agent (pid: 3301, threadinfo=f75e2000
task=f771a030)
[4294728.634000] Stack: c0164282 c1beabc0 ff932eff c1beabc0 00000000 0001ff39
080f71c2 00000000
[4294728.634000] ff932000 c1beabc0 f743f200 00000000 f75e2000 080f7868
c0165781 ffffffff
[4294728.634000] 080f7008 f743f200 080f7008 f761e000 f761e000 f75e2000
c01019ee f761e000
[4294728.634000] Call Trace:
[4294728.634000] [<c0164282>] copy_strings+0x1d2/0x220
[4294728.634000] [<c0165781>] do_execve+0x131/0x1f0
[4294728.634000] [<c01019ee>] sys_execve+0x2e/0x90
[4294728.634000] [<c0102e71>] sysenter_past_esp+0x5a/0x89
[4294728.634000] [<c0100f3b>] mwait_idle+0x3b/0x50
[4294728.634000] Code: 00 00 39 c2 74 05 e9 1c 13 03 00 89 c8 e9 55 0b 03 00
90 8d 74 26 00 b8 00 e0 ff ff 8b 4c 24 04 21 e0 f7 40 14 00 ff ff 0f 74 08
<0f> 0b 0f 00 24 12 42 c0 8b 01 c1 e8 1e 8b 14 85 dc 95 52 c0 8b
[4294728.634000] <6>note: net.agent[3301] exited with preempt_count -1
[4294728.634000] at virtual address 08a8f771
[4294728.634000] printing eip:
[4294728.634000] c03fe74b
[4294728.634000] *pde = 00000000
[4294728.634000] Oops: 0002 [#2]
[4294728.634000] PREEMPT SMP
[4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
[4294728.634000] CPU: 1
[4294728.634000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
[4294728.634000] EFLAGS: 00010286 (2.6.14.5-tc3)
[4294728.634000] EIP is at schedule+0x66b/0xd10
[4294728.634000] eax: 00000000 ebx: c1d56030 ecx: f771a030 edx: 00010001
[4294728.634000] esi: f75e2000 edi: 00000000 ebp: c03fe767 esp: f75e3ac4
[4294728.634000] ds: 0f3b es: 0f3b ss: 0f28
[4294728.634000] Process net.agent (pid: 3301, threadinfo=f75e2000
task=f771a030)
[4294728.634000] Stack: f75e2000 c0000000 f7b7e360 00000000 c037cda5 00000000
f75e3b3c 00000060
[4294728.634000] f75e3b14 f775b030 00000013 dff81780 f7773d00 f775b030
00000000 c1c13d80
[4294728.634000] c1c13420 00000001 00000000 6e93a040 000f4208 c1c138dc
f771a030 f771a158
[4294728.634000] Call Trace:
[4294728.634000] [<c037cda5>] kernel_sendmsg+0x35/0x40
[4294728.634000] [<c0343633>] sym_wide_nego+0xa3/0x130
[4294728.634000] [<c0313530>] cdrom_end_request+0x70/0xf0
[4294728.634000] [<c011ae90>] __wake_up_locked+0x10/0x20
[4294728.634000] [<c0238aef>] __down_trylock+0x2f/0x50
[4294728.634000] [<c03fe097>] __down_failed_trylock+0x7/0xc
[4294728.634000] [<c011f5b1>] vprintk+0x1d1/0x280
[4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
[4294728.634000] [<c02399a9>] sprintf+0x19/0x20
[4294728.634000] [<c011f3cf>] printk+0xf/0x20
[4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
[4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
[4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
[4294728.634000] [<c02d738d>] boomerang_interrupt+0x22d/0x400
[4294728.634000] [<f8909731>] snd_intel8x0_interrupt+0x51/0x220
[snd_intel8x0]
[4294728.634000] [<c014a68e>] zap_pte_range+0x3e/0x290
[4294728.634000] [<c014a77e>] zap_pte_range+0x12e/0x290
[4294728.634000] [<c0103ecc>] invalidate_interrupt+0x1c/0x30
[4294728.634000] [<c0112ec3>] flush_tlb_others+0x83/0xd0
[4294728.634000] [<c0112fc9>] flush_tlb_mm+0x59/0xb0
[4294728.634000] [<c014abe0>] unmap_vmas+0x250/0x290
[4294728.634000] [<c014f100>] exit_mmap+0x80/0x160
[4294728.634000] [<c011cd14>] mmput+0x24/0x80
[4294728.634000] [<c01216d5>] do_exit+0xe5/0x420
[4294728.634000] [<c0104706>] die+0x166/0x170
[4294728.634000] [<c01048c0>] do_invalid_op+0x0/0x90
[4294728.634000] [<c010493a>] do_invalid_op+0x7a/0x90
[4294728.634000] [<c0118644>] kunmap+0x14/0x40
[4294728.634000] [<c01499d0>] page_address+0x90/0xa0
[4294728.634000] [<c01499d0>] page_address+0x90/0xa0
[4294728.634000] [<c0149199>] kmap_high+0x19/0x190
[4294728.634000] [<c0149298>] kmap_high+0x118/0x190
[4294728.634000] [<c0141232>] __alloc_pages+0x3c2/0x400
[4294728.634000] [<c0141114>] __alloc_pages+0x2a4/0x400
[4294728.634000] [<c010402f>] error_code+0x4f/0x60
[4294728.634000] [<c0118644>] kunmap+0x14/0x40
[4294728.634000] [<c0164282>] copy_strings+0x1d2/0x220
[4294728.634000] [<c0165781>] do_execve+0x131/0x1f0
[4294728.634000] [<c01019ee>] sys_execve+0x2e/0x90
[4294728.634000] [<c0102e71>] sysenter_past_esp+0x5a/0x89
[4294728.634000] [<c0100f3b>] mwait_idle+0x3b/0x50
[4294728.634000] Code: 00 85 f6 74 0b f0 ff 4e 28 0f 94 c0 84 c0 75 4d 83 e7
08 75 34 be 00 e0 ff ff 21 e6 8b 0e 89 4d e4 8b 41 14 85 c0 79 1a 8b 46 08
<30> a0 71 f7 a8 08 89 7e 14 0f 85 bc f9 ff ff 8d 65 f4 5b 5e 5f
[4294728.634000] <1>Fixing recursive fault but reboot is needed!
[4294728.634000] scheduling while atomic: net.agent/0x00000002/3301
[4294728.634000] [<c03feddf>] schedule+0xcff/0xd10
[4294728.634000] [<c011f572>] vprintk+0x192/0x280
[4294728.634000] [<c0123dc6>] __do_softirq+0xc6/0xe0
[4294728.634000] [<c0123ef5>] irq_exit+0x45/0x50
[4294728.634000] [<c0103f2c>] apic_timer_interrupt+0x1c/0x30
[4294728.634000] [<c012199d>] do_exit+0x3ad/0x420
[4294728.634000] [<c0104706>] die+0x166/0x170
[4294728.634000] [<c03fe74b>] schedule+0x66b/0xd10
[4294728.634000] [<c03fe74b>] schedule+0x66b/0xd10
[4294728.634000] [<c0400c8c>] do_page_fault+0x28c/0x595
[4294728.634000] [<c0400a00>] do_page_fault+0x0/0x595
[4294728.634000] [<c03fe767>] schedule+0x687/0xd10
[4294728.634000] [<c010402f>] error_code+0x4f/0x60
[4294728.634000] [<c03fe767>] schedule+0x687/0xd10
[4294728.634000] [<c03fe74b>] schedule+0x66b/0xd10
[4294728.634000] [<c037cda5>] kernel_sendmsg+0x35/0x40
[4294728.634000] [<c0343633>] sym_wide_nego+0xa3/0x130
[4294728.634000] [<c0313530>] cdrom_end_request+0x70/0xf0
[4294728.634000] [<c011ae90>] __wake_up_locked+0x10/0x20
[4294728.634000] [<c0238aef>] __down_trylock+0x2f/0x50
[4294728.634000] [<c03fe097>] __down_failed_trylock+0x7/0xc
[4294728.634000] [<c011f5b1>] vprintk+0x1d1/0x280
[4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
[4294728.634000] [<c02399a9>] sprintf+0x19/0x20
[4294728.634000] [<c011f3cf>] printk+0xf/0x20
[4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
[4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
[4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
[4294728.634000] [<c02d738d>] boomerang_interrupt+0x22d/0x400
[4294728.634000] [<f8909731>] snd_intel8x0_interrupt+0x51/0x220
[snd_intel8x0]
[4294728.634000] [<c014a68e>] zap_pte_range+0x3e/0x290
[4294728.634000] [<c014a77e>] zap_pte_range+0x12e/0x290
[4294728.634000] [<c0103ecc>] invalidate_interrupt+0x1c/0x30
[4294728.634000] [<c0112ec3>] flush_tlb_others+0x83/0xd0
[4294728.634000] [<c0112fc9>] flush_tlb_mm+0x59/0xb0
[4294728.634000] [<c014abe0>] unmap_vmas+0x250/0x290
[4294728.634000] [<c014f100>] exit_mmap+0x80/0x160
[4294728.634000] [<c011cd14>] mmput+0x24/0x80
[4294728.634000] [<c01216d5>] do_exit+0xe5/0x420
[4294728.634000] [<c0104706>] die+0x166/0x170
[4294728.634000] [<c01048c0>] do_invalid_op+0x0/0x90
[4294728.634000] [<c010493a>] do_invalid_op+0x7a/0x90
[4294728.634000] [<c0118644>] kunmap+0x14/0x40
[4294728.634000] [<c01499d0>] page_address+0x90/0xa0
[4294728.634000] [<c01499d0>] page_address+0x90/0xa0
[4294728.634000] [<c0149199>] kmap_high+0x19/0x190
[4294728.634000] [<c0149298>] kmap_high+0x118/0x190
[4294728.634000] [<c0141232>] __alloc_pages+0x3c2/0x400
[4294728.634000] [<c0141114>] __alloc_pages+0x2a4/0x400
[4294728.634000] [<c010402f>] error_code+0x4f/0x60
[4294728.634000] [<c0118644>] kunmap+0x14/0x40
[4294728.634000] [<c0164282>] copy_strings+0x1d2/0x220
[4294728.634000] [<c0165781>] do_execve+0x131/0x1f0
[4294728.634000] [<c01019ee>] sys_execve+0x2e/0x90
[4294728.634000] [<c0102e71>] sysenter_past_esp+0x5a/0x89
[4294728.634000] [<c0100f3b>] mwait_idle+0x3b/0x50
[4294728.634000] Unable to handle kernel paging request at virtual address
08a8f771
[4294728.634000] printing eip:
[4294728.634000] c03fe74b
[4294728.634000] *pde = 00000000
[4294728.634000] Oops: 0002 [#3]
[4294728.634000] PREEMPT SMP
[4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
[4294728.634000] CPU: 1
[4294728.634000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
[4294728.634000] EFLAGS: 00010286 (2.6.14.5-tc3)
[4294728.634000] EIP is at schedule+0x66b/0xd10
[4294728.634000] eax: 00000000 ebx: f771a030 ecx: c1d5fa50 edx: 00000001
[4294728.634000] esi: c1dca000 edi: 00000000 ebp: c1dcbfb4 esp: c1dcbf40
[4294728.634000] ds: 0f3b es: 0f3b ss: 0f28
[4294728.634000] Process ksoftirqd/1 (pid: 6, threadinfo=c1dca000
task=c1d5fa50)
[4294728.634000] Stack: 00004074 dfd96c80 c031d899 dfd96c80 00000000 00000024
c0318251 dfd96c80
[4294728.634000] 00002002 dfd96c80 00004074 c1dcbf78 c0318136 dfd96c80
c1dcbf78 c1dcbf78
[4294728.634000] c1c13420 00000001 00000000 bf9f1680 000f41ff c0123dc6
c1d5fa50 c1d5fb78
[4294728.634000] Call Trace:
[4294728.634000] [<c031d899>] scsi_generic_done+0x29/0x40
[4294728.634000] [<c0318251>] scsi_finish_command+0x81/0xc0
[4294728.634000] [<c0318136>] scsi_softirq+0xc6/0x130
[4294728.634000] [<c0123dc6>] __do_softirq+0xc6/0xe0
[4294728.634000] [<c012436e>] ksoftirqd+0xde/0x100
[4294728.634000] [<c0124290>] ksoftirqd+0x0/0x100
[4294728.634000] [<c0132337>] kthread+0xa7/0xb0
[4294728.634000] [<c0132290>] kthread+0x0/0xb0
[4294728.634000] [<c01010cd>] kernel_thread_helper+0x5/0x18
[4294728.634000] Code: 00 85 f6 74 0b f0 ff 4e 28 0f 94 c0 84 c0 75 4d 83 e7
08 75 34 be 00 e0 ff ff 21 e6 8b 0e 89 4d e4 8b 41 14 85 c0 79 1a 8b 46 08
<30> a0 71 f7 a8 08 89 7e 14 0f 85 bc f9 ff ff 8d 65 f4 5b 5e 5f
[4294728.634000] <6>note: ksoftirqd/1[6] exited with preempt_count 1
[4294728.634000] Unable to handle kernel paging request at virtual address
08a8f771
[4294728.634000] printing eip:
[4294728.634000] c03fe74b
[4294728.634000] *pde = 00000000
[4294728.634000] Oops: 0002 [#4]
[4294728.634000] PREEMPT SMP
[4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
[4294728.634000] CPU: 1
[4294728.634000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
[4294728.634000] EFLAGS: 00010286 (2.6.14.5-tc3)
[4294728.634000] EIP is at schedule+0x66b/0xd10
[4294728.634000] eax: 00000000 ebx: c1d5fa50 ecx: c1d56540 edx: 10000001
------------- example 4 ------------------------------------------------------
[4294724.723000] scheduling while atomic: S35quota/0xffffffff/3508
[4294724.723000] Unable to handle kernel NULL pointer dereference at virtual
address 0000005b
[4294724.723000] printing eip:
[4294724.723000] c03fe74b
[4294724.723000] *pde = 00000000
[4294724.723000] Oops: 0002 [#1]
[4294724.723000] PREEMPT SMP
[4294724.723000] Modules linked in: dm_mod eeprom lm85 hwmon_vid i2c_isa
usbhid snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss
snd_pcm uhci_hcd snd_timer i2c_i801 intel_agp ehci_hcd snd i2c_core
snd_page_alloc usbcore agpgart
[4294724.723000] CPU: 1
[4294724.723000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
[4294724.723000] EFLAGS: 00010286 (2.6.14.5-tc3)
[4294724.723000] EIP is at schedule+0x66b/0xd10
[4294724.723000] eax: 00000000 ebx: c1d56030 ecx: f75b6030 edx: 00010001
[4294724.723000] esi: f70f4000 edi: 00000000 ebp: c03fe767 esp: f70f5ac4
[4294724.723000] ds: 0f3b es: 0f3b ss: 0f28
[4294724.723000] Process S35quota (pid: 3508, threadinfo=f70f4000
task=f75b6030)
[4294724.723000] Stack: f70f4000 c0000000 f7b536bc 00000000 c037cda5 f7b54380
f70f5b3c 00000060
[4294724.723000] f70f5b14 00000000 c03f4618 f7b54380 f70f5b3c f70f5b14
00000001 00000060
[4294724.723000] c1c0b420 00000000 00000000 8585c2c0 000f4207 00000206
f75b6030 f75b6158
[4294724.723000] Call Trace:
[4294724.723000] [<c037cda5>] kernel_sendmsg+0x35/0x40
[4294724.723000] [<c03f4618>] xdr_sendpages+0xa8/0x280
[4294724.723000] [<c011ae68>] __wake_up+0x28/0x40
[4294724.724000] [<c013fb78>] mempool_free+0x78/0x80
[4294724.724000] [<c03ee5db>] rpc_default_free_task+0x1b/0x40
[4294724.724000] [<c012a884>] sigprocmask+0x64/0x100
[4294724.724000] [<c012a884>] sigprocmask+0x64/0x100
[4294724.724000] [<c03e9fbe>] rpc_clnt_sigunmask+0xe/0x20
[4294724.724000] [<c01ff761>] nfs3_rpc_wrapper+0x61/0x70
[4294724.724000] [<c01406e8>] prep_new_page+0x58/0x60
[4294724.724000] [<c0140c9c>] buffered_rmqueue+0x11c/0x230
[4294724.724000] [<c0141232>] __alloc_pages+0x3c2/0x400
[4294724.724000] [<c0141114>] __alloc_pages+0x2a4/0x400
[4294724.724000] [<c0143e01>] kmem_getpages+0x61/0x80
[4294724.724000] [<c0144b55>] cache_grow+0xd5/0x140
[4294724.724000] [<c0144b94>] cache_grow+0x114/0x140
[4294724.724000] [<c0144d0a>] cache_alloc_refill+0x14a/0x1f0
[4294724.724000] [<c0144cdb>] cache_alloc_refill+0x11b/0x1f0
[4294724.724000] [<c0145023>] __kmalloc+0x63/0x70
[4294724.724000] [<c0380e49>] __alloc_skb+0x49/0x130
[4294724.724000] [<c02d6baf>] boomerang_start_xmit+0x13f/0x350
[4294724.724000] [<c0295dd1>] scrup+0xb1/0xc0
[4294724.724000] [<c0246964>] vgacon_cursor+0x144/0x190
[4294724.724000] [<c029734d>] lf+0x3d/0x50
[4294724.724000] [<c0299369>] vt_console_print+0x1c9/0x280
[4294724.724000] [<c011f139>] __call_console_drivers+0x49/0x50
[4294724.724000] [<c011f22c>] call_console_drivers+0x7c/0x110
[4294724.724000] [<c011f722>] release_console_sem+0x42/0xb0
[4294724.724000] [<c011f572>] vprintk+0x192/0x280
[4294724.724000] [<c02d723a>] boomerang_interrupt+0xda/0x400
[4294724.724000] [<c02d738d>] boomerang_interrupt+0x22d/0x400
[4294724.724000] [<f88f2731>] snd_intel8x0_interrupt+0x51/0x220
[snd_intel8x0]
[4294724.724000] [<c011f3cf>] printk+0xf/0x20
[4294724.724000] [<c03fedda>] schedule+0xcfa/0xd10
[4294724.724000] [<c0123dc6>] __do_softirq+0xc6/0xe0
[4294724.724000] [<c0102d77>] do_notify_resume2+0x17/0x20
[4294724.724000] [<c0102f00>] restore_all2+0x0/0x18
[4294724.724000] [<c0110f3b>] machine_emergency_restart+0x4b/0xe0
[4294724.724000] [<c03fef45>] wait_for_completion+0x85/0xd0
[4294724.724000] [<c011adc0>][
------------- Full log ----------------------------------------------
[4294667.296000] Linux version 2.6.14.5-tc3 (bernd@hamilton1) (gcc version
3.3.5 (Debian 1:3.3.5-13)) #3 SMP PREEMPT Thu Jan 5 16:50:57 CET 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000005fe30000 (usable)
[4294667.296000] BIOS-e820: 000000005fe30000 - 000000005fe3e20b (ACPI NVS)
[4294667.296000] BIOS-e820: 000000005fe3e20b - 000000005ff30000 (usable)
[4294667.296000] BIOS-e820: 000000005ff30000 - 000000005ff40000 (ACPI data)
[4294667.296000] BIOS-e820: 000000005ff40000 - 000000005fff0000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[4294667.296000] 639MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000ff780
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:2 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 15:2 APIC version 20
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[4294667.296000] Using ACPI for processor (LAPIC) configuration information
[4294667.296000] Intel MultiProcessor Specification v1.4
[4294667.296000] Virtual Wire compatibility mode.
[4294667.296000] OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000
[4294667.296000] I/O APIC #2 Version 32 at 0xFEC00000.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Processors: 2
[4294667.296000] Allocating PCI resources starting at 70000000 (gap:
60000000:9ecf0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: initrd=client_initrd-l26.unfs3
root=/dev/ram0 rw apm=power-off mce pci=noacpi
netconsole=4444@129.206.21.51/eth0,5555@129.206.21.136/00:04:75:BF:B9:4A
BOOT_IMAGE=linux-2.6.14.5-tc3
ip=129.206.21.51:129.206.21.201:129.206.21.1:255.255.255.0
[4294667.296000] netconsole: local port 4444
[4294667.296000] netconsole: local IP 129.206.21.51
[4294667.296000] netconsole: interface eth0
[4294667.296000] netconsole: remote port 5555
[4294667.296000] netconsole: remote IP 129.206.21.136
[4294667.296000] netconsole: remote ethernet address 00:04:75:bf:b9:4a
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 2594.205 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.096000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[4294670.096000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[4294670.162000] Memory: 1548480k/1572032k available (3078k kernel code,
22316k reserved, 1183k data, 236k init, 654468k highmem)
[4294670.162000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[4294670.222000] Calibrating delay using timer specific routine.. 5190.56
BogoMIPS (lpj=2595281)
[4294670.222000] Mount-cache hash table entries: 512
[4294670.222000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294670.222000] CPU: L2 cache: 512K
[4294670.222000] CPU: Physical Processor ID: 0
[4294670.222000] Intel machine check architecture supported.
[4294670.222000] Intel machine check reporting enabled on CPU#0.
[4294670.222000] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[4294670.222000] CPU0: Thermal monitoring enabled
[4294670.222000] mtrr: v2.0 (20020519)
[4294670.222000] Enabling fast FPU save and restore... done.
[4294670.222000] Enabling unmasked SIMD FPU exception support... done.
[4294670.222000] Checking 'hlt' instruction... OK.
[4294670.227000] tbxface-0109 [02] load_tables : ACPI Tables
successfully acquired
[4294670.234000] Parsing all Control
Methods:..................................................................................................................................................................................
[4294670.249000] Table [DSDT](id 0005) - 633 Objects with 51 Devices 178
Methods 22 Regions
[4294670.249000] ACPI Namespace successfully loaded at root c058bfd8
[4294670.249000] evxfevnt-0091 [03] enable : Transition to ACPI
mode successful
[4294670.249000] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
[4294670.249000] Booting processor 1/1 eip 2000
[4294670.259000] Initializing CPU#1
[4294670.321000] Calibrating delay using timer specific routine.. 5186.27
BogoMIPS (lpj=2593135)
[4294670.321000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294670.321000] CPU: L2 cache: 512K
[4294670.321000] CPU: Physical Processor ID: 0
[4294670.321000] Intel machine check architecture supported.
[4294670.321000] Intel machine check reporting enabled on CPU#1.
[4294670.321000] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[4294670.321000] CPU1: Thermal monitoring enabled
[4294670.321000] CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
[4294670.321000] Total of 2 processors activated (10376.83 BogoMIPS).
[4294670.321000] ENABLING IO-APIC IRQs
[4294670.321000] ..TIMER: vector=0x31 pin1=2 pin2=0
[4294670.432000] checking TSC synchronization across 2 CPUs: passed.
[4294670.432000] softlockup thread 0 started up.
[4294670.433000] Brought up 2 CPUs
[4294670.433000] softlockup thread 1 started up.
[4294670.433000] checking if image is initramfs...it isn't (bad gzip magic
numbers); looks like an initrd
[4294670.438000] Freeing initrd memory: 4096k freed
[4294670.439000] NET: Registered protocol family 16
[4294670.439000] ACPI: bus type pci registered
[4294670.440000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[4294670.440000] PCI: Using configuration type 1
[4294670.440000] ACPI: Subsystem revision 20050902
[4294670.446000] evgpeblk-0988 [06] ev_create_gpe_block : GPE 00 to 1F
[_GPE] 4 regs on int 0x9
[4294670.447000] evgpeblk-0996 [06] ev_create_gpe_block : Found 9 Wake,
Enabled 0 Runtime GPEs in this block
[4294670.448000] Completing Region/Field/Buffer/Package
initialization:......................................................................................................................
[4294670.457000] Initialized 21/22 Regions 29/29 Fields 47/47 Buffers 21/21
Packages (642 nodes)
[4294670.457000] Executing all Device _STA and_INI
methods:.......................................................
[4294670.465000] 55 Devices found containing: 55 _STA, 1 _INI methods
[4294670.465000] ACPI: Interpreter enabled
[4294670.465000] ACPI: Using PIC for interrupt routing
[4294670.484000] ACPI: Power Resource [URP1] (off)
[4294670.484000] ACPI: Power Resource [FDDP] (off)
[4294670.485000] ACPI: Power Resource [LPTP] (off)
[4294670.494000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.494000] SCSI subsystem initialized
[4294670.494000] PCI: Probing PCI hardware
[4294670.494000] PCI: Probing PCI hardware (bus 00)
[4294670.501000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[4294670.501000] PCI quirk: region 0500-053f claimed by ICH4 GPIO
[4294670.501000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294670.502000] PCI: Transparent bridge - 0000:00:1e.0
[4294670.520000] PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
[4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16
[4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
[4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
[4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.3[A] -> IRQ 16
[4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 23
[4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 18
[4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.2[A] -> IRQ 18
[4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
[4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17
[4294670.520000] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[4294670.520000] PCI->APIC IRQ transform: 0000:02:02.0[A] -> IRQ 17
[4294670.527000] PCI: Bridge: 0000:00:01.0
[4294670.527000] IO window: disabled.
[4294670.527000] MEM window: fd900000-fe9fffff
[4294670.527000] PREFETCH window: f1800000-f57fffff
[4294670.527000] PCI: Bridge: 0000:00:1e.0
[4294670.527000] IO window: b000-bfff
[4294670.527000] MEM window: fea00000-feafffff
[4294670.527000] PREFETCH window: 70000000-700fffff
[4294670.527000] Machine check exception polling timer started.
[4294670.527000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294670.527000] apm: overridden by ACPI.
[4294670.530000] highmem bounce pool size: 64 pages
[4294670.530000] Total HugeTLB memory allocated, 0
[4294670.530000] VFS: Disk quotas dquot_6.5.1
[4294670.530000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.530000] Initializing Cryptographic API
[4294670.530000] ACPI: Power Button (FF) [PWRF]
[4294670.530000] ACPI: Sleep Button (CM) [SLPB]
[4294670.531000] ACPI: CPU0 (power states: C1[C1])
[4294670.531000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294670.531000] ACPI: CPU1 (power states: C1[C1])
[4294670.531000] ACPI: Processor [CPU2] (supports 8 throttling states)
[4294670.531000] isapnp: Scanning for PnP cards...
[4294670.888000] isapnp: No Plug & Play device found
[4294670.911000] Real Time Clock Driver v1.12
[4294670.911000] hw_random hardware driver 1.0.0 loaded
[4294670.911000] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180
seconds, margin is 60 seconds).
[4294670.911000] Hangcheck: Using monotonic_clock().
[4294670.912000] PNP: No PS/2 controller found. Probing ports directly.
[4294670.914000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.914000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.914000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing disabled
[4294670.915000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.915000] io scheduler noop registered
[4294670.915000] io scheduler anticipatory registered
[4294670.915000] io scheduler deadline registered
[4294670.915000] io scheduler cfq registered
[4294670.915000] Floppy drive(s): fd0 is 1.44M
[4294670.932000] FDC 0 is a National Semiconductor PC87306
[4294670.933000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize
[4294670.933000] pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and
petero2@telia.com
[4294670.933000] Intel(R) PRO/1000 Network Driver - version 6.0.60-k2
[4294670.933000] Copyright (c) 1999-2005 Intel Corporation.
[4294670.934000] 3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
[4294670.934000] 0000:02:02.0: 3Com PCI 3c905C Tornado at 0xbc00. Vers
LK1.1.19
[4294670.956000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI
[4294670.956000] e100: Copyright(c) 1999-2005 Intel Corporation
[4294670.956000] netconsole: device eth0 not up yet, forcing it
[4294670.956000] netconsole: carrier detect appears untrustworthy, waiting 4
seconds
[4294674.965000] netconsole: network logging started
[4294674.965000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294674.965000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[4294674.965000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[4294674.965000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294674.965000] ICH5: chipset revision 2
[4294674.965000] ICH5: not 100% native mode: will probe irqs later
[4294674.966000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,
hdb:pio
[4294674.966000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA,
hdd:pio
[4294675.230000] hda: ST3120026A, ATA DISK drive
[4294675.843000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294676.515000] hdc: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
[4294676.821000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.822000] hda: max request size: 1024KiB
[4294676.822000] hda: 234441648 sectors (120034 MB) w/8192KiB Cache,
CHS=16383/255/63, UDMA(100)
[4294676.823000] hda: cache flushes supported
[4294676.823000] hda: hda1 hda2 < hda5 hda6 hda7 >
[4294676.867000] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294676.867000] Uniform CD-ROM driver Revision: 3.20
[4294676.871000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00
irq 18
[4294676.871000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08
irq 18
[4294677.033000] ATA: abnormal status 0x7F on port 0xEC07
[4294677.033000] scsi0 : ata_piix
[4294677.195000] ATA: abnormal status 0x7F on port 0xE407
[4294677.195000] scsi1 : ata_piix
[4294677.198000] ieee1394: raw1394: /dev/raw1394 device initialized
[4294677.198000] MC: drivers/edac/edac_mc.c version MC $Revision: 1.1.2.1 $
[4294677.198000] mice: PS/2 mouse device common for all mice
[4294677.199000] input: PC Speaker
[4294677.199000] NET: Registered protocol family 2
[4294677.214000] IP route cache hash table entries: 65536 (order: 6, 262144
bytes)
[4294677.214000] TCP established hash table entries: 262144 (order: 9, 3145728
bytes)
[4294677.217000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[4294677.218000] TCP: Hash tables configured (established 262144 bind 65536)
[4294677.218000] TCP reno registered
[4294677.218000] ip_tables: (C) 2000-2002 Netfilter core team
[4294677.249000] ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
http://snowman.net/projects/ipt_recent/
[4294677.249000] arp_tables: (C) 2002 David S. Miller
[4294677.261000] TCP bic registered
[4294677.261000] NET: Registered protocol family 1
[4294677.261000] NET: Registered protocol family 17
[4294677.262000] acpi_processor-0181 [03] processor_get_performa: Invalid _PCT
data
[4294677.262000] acpi_processor-0181 [03] processor_get_performa: Invalid _PCT
data
[4294677.262000] Starting balanced_irq
[4294677.262000] Using IPI Shortcut mode
[4294677.262000] RAMDISK: ext2 filesystem found at block 0
[4294677.262000] RAMDISK: Loading 4096KiB [1 disk] into ram disk... done.
[4294677.282000] EXT2-fs warning: checktime reached, running e2fsck is
recommended
[4294677.282000] VFS: Mounted root (ext2 filesystem).
[4294677.282000] Freeing unused kernel memory: 236k freed
[4294677.384000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294711.121000] Linux agpgart interface v0.101 (c) Dave Jones
[4294711.140000] usbcore: registered new driver usbfs
[4294711.142000] usbcore: registered new driver hub
[4294711.165000] acpi_bus-0200 [01] bus_set_power : Device is not
power manageable
[4294711.165000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294711.165000] ehci_hcd 0000:00:1d.7: debug port 1
[4294711.166000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[4294711.166000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[4294711.171000] agpgart: Detected an Intel 865 Chipset.
[4294711.174000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver
10 Dec 2004
[4294711.174000] usb usb1: Product: EHCI Host Controller
[4294711.174000] usb usb1: Manufacturer: Linux 2.6.14.5-tc3 ehci_hcd
[4294711.174000] usb usb1: SerialNumber: 0000:00:1d.7
[4294711.175000] agpgart: AGP aperture is 64M @ 0xf8000000
[4294711.185000] hub 1-0:1.0: USB hub found
[4294711.185000] hub 1-0:1.0: 8 ports detected
[4294711.246000] USB Universal Host Controller Interface driver v2.3
[4294711.247000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294711.247000] uhci_hcd 0000:00:1d.0: detected 2 ports
[4294711.289000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[4294711.289000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[4294711.289000] usb usb2: Product: UHCI Host Controller
[4294711.289000] usb usb2: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
[4294711.289000] usb usb2: SerialNumber: 0000:00:1d.0
[4294711.295000] hub 2-0:1.0: USB hub found
[4294711.295000] hub 2-0:1.0: 2 ports detected
[4294711.396000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294711.396000] uhci_hcd 0000:00:1d.1: detected 2 ports
[4294711.397000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[4294711.397000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[4294711.398000] usb usb3: Product: UHCI Host Controller
[4294711.398000] usb usb3: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
[4294711.398000] usb usb3: SerialNumber: 0000:00:1d.1
[4294711.399000] hub 3-0:1.0: USB hub found
[4294711.399000] hub 3-0:1.0: 2 ports detected
[4294711.502000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294711.502000] uhci_hcd 0000:00:1d.2: detected 2 ports
[4294711.504000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[4294711.504000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[4294711.504000] usb usb4: Product: UHCI Host Controller
[4294711.504000] usb usb4: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
[4294711.504000] usb usb4: SerialNumber: 0000:00:1d.2
[4294711.507000] hub 4-0:1.0: USB hub found
[4294711.507000] hub 4-0:1.0: 2 ports detected
[4294711.608000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294711.608000] uhci_hcd 0000:00:1d.3: detected 2 ports
[4294711.610000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[4294711.610000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[4294711.610000] usb usb5: Product: UHCI Host Controller
[4294711.611000] usb usb5: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
[4294711.611000] usb usb5: SerialNumber: 0000:00:1d.3
[4294711.613000] hub 5-0:1.0: USB hub found
[4294711.613000] hub 5-0:1.0: 2 ports detected
[4294711.649000] usb 2-2: new low speed USB device using uhci_hcd and address
2
[4294711.810000] usb 2-2: Product: USB-PS/2 Optical Mouse
[4294711.810000] usb 2-2: Manufacturer: Logitech
[4294712.030000] intel8x0_measure_ac97_clock: measured 51171 usecs
[4294712.030000] intel8x0: clocking to 48000
[4294712.570000] usbcore: registered new driver hiddev
[4294712.594000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse]
on usb-0000:00:1d.0-2
[4294712.594000] usbcore: registered new driver usbhid
[4294712.594000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294713.984000] Adding 1951856k swap on /dev/hda5. Priority:-1 extents:1
across:1951856k
[4294717.697000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel@redhat.com
[4294717.990000] ReiserFS: hda6: found reiserfs format "3.6" with standard
journal
[4294723.311000] ReiserFS: hda6: using ordered data mode
[4294723.337000] ReiserFS: hda6: journal params: device hda6, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[4294723.337000] ReiserFS: hda6: checking transaction log (hda6)
[4294723.348000] ReiserFS: hda6: replayed 2 transactions in 0 seconds
[4294723.356000] ReiserFS: hda6: Using r5 hash to sort names
[4294723.442000] ReiserFS: hda7: found reiserfs format "3.6" with standard
journal
[4294724.024000] ReiserFS: hda7: using ordered data mode
[4294724.040000] ReiserFS: hda7: journal params: device hda7, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[4294724.041000] ReiserFS: hda7: checking transaction log (hda7)
[4294724.051000] ReiserFS: hda7: replayed 2 transactions in 0 seconds
[4294724.069000] ReiserFS: hda7: Using r5 hash to sort names
[Oops 4]
--
Bernd Schubert
Physikalisch Chemisches Institut / Theoretische Chemie
Universität Heidelberg
INF 229
69120 Heidelberg
e-mail: bernd.schubert@pci.uni-heidelberg.de
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: a couple of oopses with 2.6.14
2006-02-09 18:34 a couple of oopses with 2.6.14 Bernd Schubert
@ 2006-02-09 23:27 ` Andrew Morton
0 siblings, 0 replies; 11+ messages in thread
From: Andrew Morton @ 2006-02-09 23:27 UTC (permalink / raw)
To: bernd-schubert; +Cc: bernd.schubert, linux-kernel, linux-scsi
Bernd Schubert <bernd.schubert@pci.uni-heidelberg.de> wrote:
>
> Hi,
>
> here's a machine that works perfectly with 2.6.11, but gives oopes during the
> boot process with 2.6.14. Unfortunately its everytime another oops. Usually I
> would assume its a memory issue, but the machine really works perfectly with
> 2.6.11.
scsi has had a few problems with error recovery lately.
> We will run a memory test over the weekend, but so far I don't believe it will
> find anything.
No, I wouldn't bother doing that.
> ------------- example 1 ------------------------------------------------------
>
> [4294676.669000] scsi0 : ata_piix
> [4294676.831000] ATA: abnormal status 0x7F on port 0xE407
So we have a sata problem. It triggered two scsi bugs. The first (a
warning) is being fixed. I don't know if the second has been fixed.
Can you test 2.6.15?
> [4294676.831000] scsi1 : ata_piix
> [4294676.833000] scheduling while atomic: ksoftirqd/0/0x00000101/3
> [4294676.833000] [<c03feddf>] schedule+0xcff/0xd10
> [4294676.833000] [<c011af27>] complete+0x27/0x40
> [4294676.833000] [<c03ffd27>] __down+0x87/0xf0
> [4294676.833000] [<c011adc0>] default_wake_function+0x0/0x20
> [4294676.833000] [<c03fdce0>] klist_release+0x0/0x50
> [4294676.833000] [<c023734a>] kref_put+0x2a/0x80
> [4294676.833000] [<c03fe07f>] __down_failed+0x7/0xc
> [4294676.833000] [<c02aaad6>] .text.lock.main+0x28/0x42
> [4294676.833000] [<c02a6585>] device_del+0x35/0x60
> [4294676.833000] [<c031edf6>] scsi_target_reap+0x86/0xb0
> [4294676.833000] [<c03206f7>] scsi_device_dev_release+0xc7/0x120
> [4294676.833000] [<c02a6165>] device_release+0x45/0x50
> [4294676.833000] [<c0236a97>] kobject_cleanup+0x67/0x70
> [4294676.833000] [<c0236aa0>] kobject_release+0x0/0x10
> [4294676.833000] [<c023734a>] kref_put+0x2a/0x80
> [4294676.833000] [<c0236ac6>] kobject_put+0x16/0x20
> [4294676.833000] [<c0236aa0>] kobject_release+0x0/0x10
> [4294676.834000] [<c031cf91>] scsi_next_command+0x11/0x20
> [4294676.834000] [<c031d086>] scsi_end_request+0xa6/0xc0
> [4294676.834000] [<c031d40a>] scsi_io_completion+0x22a/0x490
> [4294676.834000] [<c031d899>] scsi_generic_done+0x29/0x40
> [4294676.834000] [<c0318251>] scsi_finish_command+0x81/0xc0
> [4294676.834000] [<c0318136>] scsi_softirq+0xc6/0x130
> [4294676.834000] [<c0123dc6>] __do_softirq+0xc6/0xe0
> [4294676.834000] [<c0123e15>] do_softirq+0x35/0x40
> [4294676.834000] [<c0124319>] ksoftirqd+0x89/0x100
> [4294676.834000] [<c0124290>] ksoftirqd+0x0/0x100
> [4294676.834000] [<c0132337>] kthread+0xa7/0xb0
> [4294676.834000] [<c0132290>] kthread+0x0/0xb0
> [4294676.834000] [<c01010cd>] kernel_thread_helper+0x5/0x18
> [4294676.834000] Unable to handle kernel NULL pointer dereference at virtual
> address 00000000
> [4294676.834000] printing eip:
> [4294676.834000] c031ce82
> [4294676.834000] *pde = 00000000
> [4294676.834000] Oops: 0000 [#1]
> [4294676.834000] PREEMPT SMP
> [4294676.834000] Modules linked in:
> [4294676.834000] CPU: 0
> [4294676.834000] EIP: 0f20:[<c031ce82>] Not tainted VLI
> [4294676.834000] EFLAGS: 00010246 (2.6.14.5-tc3)
> [4294676.834000] EIP is at scsi_run_queue+0x12/0xc0
> [4294676.834000] eax: 00000000 ebx: dfcddd9c ecx: dfd8009c edx: c0236aa0
> [4294676.834000] esi: dfcd9c80 edi: dfcc9b84 ebp: 00000202 esp: c1da5ed0
> [4294676.834000] ds: 0f3b es: 0f3b ss: 0f28
> [4294676.834000] Process ksoftirqd/0 (pid: 3, threadinfo=c1da4000
> task=c1d5aa50)
> [4294676.834000] Stack: dfcc9b84 dfcddd9c dfcd9c80 dfcc9b84 00000202 c031d086
> dfcc9b84 dfcddd9c
> [4294676.834000] dfcd9c80 00000024 dfffe800 00000024 c031d40a dfcd9c80
> 00000000 00000024
> [4294676.834000] 00000001 00000000 00000000 00000000 dfcc9b84 00000024
> 00040000 00000000
> [4294676.834000] Call Trace:
> [4294676.834000] [<c031d086>] scsi_end_request+0xa6/0xc0
> [4294676.834000] [<c031d40a>] scsi_io_completion+0x22a/0x490
> [4294676.834000] [<c031d899>] scsi_generic_done+0x29/0x40
> [4294676.834000] [<c0318251>] scsi_finish_command+0x81/0xc0
> [4294676.834000] [<c0318136>] scsi_softirq+0xc6/0x130
> [4294676.834000] [<c0123dc6>] __do_softirq+0xc6/0xe0
> [4294676.834000] [<c0123e15>] do_softirq+0x35/0x40
> [4294676.834000] [<c0124319>] ksoftirqd+0x89/0x100
> [4294676.834000] [<c0124290>] ksoftirqd+0x0/0x100
> [4294676.834000] [<c0132337>] kthread+0xa7/0xb0
> [4294676.834000] [<c0132290>] kthread+0x0/0xb0
> [4294676.834000] [<c01010cd>]<7>ieee1394: Initialized config rom entry
> `ip1394'
> [4294676.834000] kernel_thread_helper+0x5/0x18
> [4294676.834000] Code: 00 89 44 24 04 53 e8 <6>ieee1394: raw1394: /dev/raw1394
> device initialized
> [4294676.834000] 2e b6 ff <6>MC: drivers/edac/edac_mc.c version MC $Revision:
> 1.1.2.1 $
> [4294676.834000] ff 58 5a eb aa 8d 76 00 8d bc 27 00 00 00 00 55 57 56 53 51
> 8b 44 24 18 89 04 24 8b 80 f8 00 00 00 <8b> 38 f6 80 7d 01 00 00 80 0f 85 87
> 00 00 00 <6>mice: PS/2 mouse device common for all mice
> [4294676.834000] 8b 47 34 8d 6f 24
> [4294676.834000] <0>Kernel panic - not syncing: Fatal exception in interrupt
> [4294676.837000] [4294667.296000] Linux version 2.6.14.5-tc3
> (bernd@hamilton1) (gcc version 3.3.5 (Debian 1:3.3.5
>
> ------------- example 2 ------------------------------------------------------
> [4294708.516000] Unable to handle kernel paging request at virtual address
> 8d2311c4
> [4294708.516000] printing eip:
> [4294708.516000] c03fe70c
> [4294708.516000] *pde = 00000000
> [4294708.516000] Oops: 0000 [#1]
> [4294708.516000] PREEMPT SMP
> [4294708.516000] Modules linked in:
> [4294708.516000] CPU: 1
> [4294708.516000] EIP: 0f20:[<c03fe70c>] Not tainted VLI
> [4294708.516000] EFLAGS: 00010083 (2.6.14.5-tc3)
> [4294708.516000] EIP is at schedule+0x62c/0xd10
> [4294667.296000] Linux version 2.6.14.5-tc3 (bernd@hamilton1) (gcc version
> 3.3.5 (Debian 1:3.3.5-13)) #3 SMP PREEM
>
> ------------- example 3 ------------------------------------------------------
> [4294728.634000] Unable to handle kernel paging request------------[ cut
> here ]------------
> [4294728.634000] kernel BUG at arch/i386/mm/highmem.c:15!
> [4294728.634000] invalid operand: 0000 [#1]
> [4294728.634000] PREEMPT SMP
> [4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
> snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
> i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
> [4294728.634000] CPU: 1
> [4294728.634000] EIP: 0f20:[<c0118644>] Not tainted VLI
> [4294728.634000] EFLAGS: 00010206 (2.6.14.5-tc3)
> [4294728.634000] EIP is at kunmap+0x14/0x40
> [4294728.634000] eax: f75e2000 ebx: 0000003a ecx: c1beabc0 edx: ffffffff
> [4294728.634000] esi: 0001ff39 edi: ff932eff ebp: 00000000 esp: f75e3f48
> [4294728.634000] ds: 0f3b es: 0f3b ss: 0f28
> [4294728.634000] Process net.agent (pid: 3301, threadinfo=f75e2000
> task=f771a030)
> [4294728.634000] Stack: c0164282 c1beabc0 ff932eff c1beabc0 00000000 0001ff39
> 080f71c2 00000000
> [4294728.634000] ff932000 c1beabc0 f743f200 00000000 f75e2000 080f7868
> c0165781 ffffffff
> [4294728.634000] 080f7008 f743f200 080f7008 f761e000 f761e000 f75e2000
> c01019ee f761e000
> [4294728.634000] Call Trace:
> [4294728.634000] [<c0164282>] copy_strings+0x1d2/0x220
> [4294728.634000] [<c0165781>] do_execve+0x131/0x1f0
> [4294728.634000] [<c01019ee>] sys_execve+0x2e/0x90
> [4294728.634000] [<c0102e71>] sysenter_past_esp+0x5a/0x89
> [4294728.634000] [<c0100f3b>] mwait_idle+0x3b/0x50
> [4294728.634000] Code: 00 00 39 c2 74 05 e9 1c 13 03 00 89 c8 e9 55 0b 03 00
> 90 8d 74 26 00 b8 00 e0 ff ff 8b 4c 24 04 21 e0 f7 40 14 00 ff ff 0f 74 08
> <0f> 0b 0f 00 24 12 42 c0 8b 01 c1 e8 1e 8b 14 85 dc 95 52 c0 8b
> [4294728.634000] <6>note: net.agent[3301] exited with preempt_count -1
> [4294728.634000] at virtual address 08a8f771
> [4294728.634000] printing eip:
> [4294728.634000] c03fe74b
> [4294728.634000] *pde = 00000000
> [4294728.634000] Oops: 0002 [#2]
> [4294728.634000] PREEMPT SMP
> [4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
> snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
> i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
> [4294728.634000] CPU: 1
> [4294728.634000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
> [4294728.634000] EFLAGS: 00010286 (2.6.14.5-tc3)
> [4294728.634000] EIP is at schedule+0x66b/0xd10
> [4294728.634000] eax: 00000000 ebx: c1d56030 ecx: f771a030 edx: 00010001
> [4294728.634000] esi: f75e2000 edi: 00000000 ebp: c03fe767 esp: f75e3ac4
> [4294728.634000] ds: 0f3b es: 0f3b ss: 0f28
> [4294728.634000] Process net.agent (pid: 3301, threadinfo=f75e2000
> task=f771a030)
> [4294728.634000] Stack: f75e2000 c0000000 f7b7e360 00000000 c037cda5 00000000
> f75e3b3c 00000060
> [4294728.634000] f75e3b14 f775b030 00000013 dff81780 f7773d00 f775b030
> 00000000 c1c13d80
> [4294728.634000] c1c13420 00000001 00000000 6e93a040 000f4208 c1c138dc
> f771a030 f771a158
> [4294728.634000] Call Trace:
> [4294728.634000] [<c037cda5>] kernel_sendmsg+0x35/0x40
> [4294728.634000] [<c0343633>] sym_wide_nego+0xa3/0x130
> [4294728.634000] [<c0313530>] cdrom_end_request+0x70/0xf0
> [4294728.634000] [<c011ae90>] __wake_up_locked+0x10/0x20
> [4294728.634000] [<c0238aef>] __down_trylock+0x2f/0x50
> [4294728.634000] [<c03fe097>] __down_failed_trylock+0x7/0xc
> [4294728.634000] [<c011f5b1>] vprintk+0x1d1/0x280
> [4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
> [4294728.634000] [<c02399a9>] sprintf+0x19/0x20
> [4294728.634000] [<c011f3cf>] printk+0xf/0x20
> [4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
> [4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
> [4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
> [4294728.634000] [<c02d738d>] boomerang_interrupt+0x22d/0x400
> [4294728.634000] [<f8909731>] snd_intel8x0_interrupt+0x51/0x220
> [snd_intel8x0]
> [4294728.634000] [<c014a68e>] zap_pte_range+0x3e/0x290
> [4294728.634000] [<c014a77e>] zap_pte_range+0x12e/0x290
> [4294728.634000] [<c0103ecc>] invalidate_interrupt+0x1c/0x30
> [4294728.634000] [<c0112ec3>] flush_tlb_others+0x83/0xd0
> [4294728.634000] [<c0112fc9>] flush_tlb_mm+0x59/0xb0
> [4294728.634000] [<c014abe0>] unmap_vmas+0x250/0x290
> [4294728.634000] [<c014f100>] exit_mmap+0x80/0x160
> [4294728.634000] [<c011cd14>] mmput+0x24/0x80
> [4294728.634000] [<c01216d5>] do_exit+0xe5/0x420
> [4294728.634000] [<c0104706>] die+0x166/0x170
> [4294728.634000] [<c01048c0>] do_invalid_op+0x0/0x90
> [4294728.634000] [<c010493a>] do_invalid_op+0x7a/0x90
> [4294728.634000] [<c0118644>] kunmap+0x14/0x40
> [4294728.634000] [<c01499d0>] page_address+0x90/0xa0
> [4294728.634000] [<c01499d0>] page_address+0x90/0xa0
> [4294728.634000] [<c0149199>] kmap_high+0x19/0x190
> [4294728.634000] [<c0149298>] kmap_high+0x118/0x190
> [4294728.634000] [<c0141232>] __alloc_pages+0x3c2/0x400
> [4294728.634000] [<c0141114>] __alloc_pages+0x2a4/0x400
> [4294728.634000] [<c010402f>] error_code+0x4f/0x60
> [4294728.634000] [<c0118644>] kunmap+0x14/0x40
> [4294728.634000] [<c0164282>] copy_strings+0x1d2/0x220
> [4294728.634000] [<c0165781>] do_execve+0x131/0x1f0
> [4294728.634000] [<c01019ee>] sys_execve+0x2e/0x90
> [4294728.634000] [<c0102e71>] sysenter_past_esp+0x5a/0x89
> [4294728.634000] [<c0100f3b>] mwait_idle+0x3b/0x50
> [4294728.634000] Code: 00 85 f6 74 0b f0 ff 4e 28 0f 94 c0 84 c0 75 4d 83 e7
> 08 75 34 be 00 e0 ff ff 21 e6 8b 0e 89 4d e4 8b 41 14 85 c0 79 1a 8b 46 08
> <30> a0 71 f7 a8 08 89 7e 14 0f 85 bc f9 ff ff 8d 65 f4 5b 5e 5f
> [4294728.634000] <1>Fixing recursive fault but reboot is needed!
> [4294728.634000] scheduling while atomic: net.agent/0x00000002/3301
> [4294728.634000] [<c03feddf>] schedule+0xcff/0xd10
> [4294728.634000] [<c011f572>] vprintk+0x192/0x280
> [4294728.634000] [<c0123dc6>] __do_softirq+0xc6/0xe0
> [4294728.634000] [<c0123ef5>] irq_exit+0x45/0x50
> [4294728.634000] [<c0103f2c>] apic_timer_interrupt+0x1c/0x30
> [4294728.634000] [<c012199d>] do_exit+0x3ad/0x420
> [4294728.634000] [<c0104706>] die+0x166/0x170
> [4294728.634000] [<c03fe74b>] schedule+0x66b/0xd10
> [4294728.634000] [<c03fe74b>] schedule+0x66b/0xd10
> [4294728.634000] [<c0400c8c>] do_page_fault+0x28c/0x595
> [4294728.634000] [<c0400a00>] do_page_fault+0x0/0x595
> [4294728.634000] [<c03fe767>] schedule+0x687/0xd10
> [4294728.634000] [<c010402f>] error_code+0x4f/0x60
> [4294728.634000] [<c03fe767>] schedule+0x687/0xd10
> [4294728.634000] [<c03fe74b>] schedule+0x66b/0xd10
> [4294728.634000] [<c037cda5>] kernel_sendmsg+0x35/0x40
> [4294728.634000] [<c0343633>] sym_wide_nego+0xa3/0x130
> [4294728.634000] [<c0313530>] cdrom_end_request+0x70/0xf0
> [4294728.634000] [<c011ae90>] __wake_up_locked+0x10/0x20
> [4294728.634000] [<c0238aef>] __down_trylock+0x2f/0x50
> [4294728.634000] [<c03fe097>] __down_failed_trylock+0x7/0xc
> [4294728.634000] [<c011f5b1>] vprintk+0x1d1/0x280
> [4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
> [4294728.634000] [<c02399a9>] sprintf+0x19/0x20
> [4294728.634000] [<c011f3cf>] printk+0xf/0x20
> [4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
> [4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
> [4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
> [4294728.634000] [<c02d738d>] boomerang_interrupt+0x22d/0x400
> [4294728.634000] [<f8909731>] snd_intel8x0_interrupt+0x51/0x220
> [snd_intel8x0]
> [4294728.634000] [<c014a68e>] zap_pte_range+0x3e/0x290
> [4294728.634000] [<c014a77e>] zap_pte_range+0x12e/0x290
> [4294728.634000] [<c0103ecc>] invalidate_interrupt+0x1c/0x30
> [4294728.634000] [<c0112ec3>] flush_tlb_others+0x83/0xd0
> [4294728.634000] [<c0112fc9>] flush_tlb_mm+0x59/0xb0
> [4294728.634000] [<c014abe0>] unmap_vmas+0x250/0x290
> [4294728.634000] [<c014f100>] exit_mmap+0x80/0x160
> [4294728.634000] [<c011cd14>] mmput+0x24/0x80
> [4294728.634000] [<c01216d5>] do_exit+0xe5/0x420
> [4294728.634000] [<c0104706>] die+0x166/0x170
> [4294728.634000] [<c01048c0>] do_invalid_op+0x0/0x90
> [4294728.634000] [<c010493a>] do_invalid_op+0x7a/0x90
> [4294728.634000] [<c0118644>] kunmap+0x14/0x40
> [4294728.634000] [<c01499d0>] page_address+0x90/0xa0
> [4294728.634000] [<c01499d0>] page_address+0x90/0xa0
> [4294728.634000] [<c0149199>] kmap_high+0x19/0x190
> [4294728.634000] [<c0149298>] kmap_high+0x118/0x190
> [4294728.634000] [<c0141232>] __alloc_pages+0x3c2/0x400
> [4294728.634000] [<c0141114>] __alloc_pages+0x2a4/0x400
> [4294728.634000] [<c010402f>] error_code+0x4f/0x60
> [4294728.634000] [<c0118644>] kunmap+0x14/0x40
> [4294728.634000] [<c0164282>] copy_strings+0x1d2/0x220
> [4294728.634000] [<c0165781>] do_execve+0x131/0x1f0
> [4294728.634000] [<c01019ee>] sys_execve+0x2e/0x90
> [4294728.634000] [<c0102e71>] sysenter_past_esp+0x5a/0x89
> [4294728.634000] [<c0100f3b>] mwait_idle+0x3b/0x50
> [4294728.634000] Unable to handle kernel paging request at virtual address
> 08a8f771
> [4294728.634000] printing eip:
> [4294728.634000] c03fe74b
> [4294728.634000] *pde = 00000000
> [4294728.634000] Oops: 0002 [#3]
> [4294728.634000] PREEMPT SMP
> [4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
> snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
> i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
> [4294728.634000] CPU: 1
> [4294728.634000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
> [4294728.634000] EFLAGS: 00010286 (2.6.14.5-tc3)
> [4294728.634000] EIP is at schedule+0x66b/0xd10
> [4294728.634000] eax: 00000000 ebx: f771a030 ecx: c1d5fa50 edx: 00000001
> [4294728.634000] esi: c1dca000 edi: 00000000 ebp: c1dcbfb4 esp: c1dcbf40
> [4294728.634000] ds: 0f3b es: 0f3b ss: 0f28
> [4294728.634000] Process ksoftirqd/1 (pid: 6, threadinfo=c1dca000
> task=c1d5fa50)
> [4294728.634000] Stack: 00004074 dfd96c80 c031d899 dfd96c80 00000000 00000024
> c0318251 dfd96c80
> [4294728.634000] 00002002 dfd96c80 00004074 c1dcbf78 c0318136 dfd96c80
> c1dcbf78 c1dcbf78
> [4294728.634000] c1c13420 00000001 00000000 bf9f1680 000f41ff c0123dc6
> c1d5fa50 c1d5fb78
> [4294728.634000] Call Trace:
> [4294728.634000] [<c031d899>] scsi_generic_done+0x29/0x40
> [4294728.634000] [<c0318251>] scsi_finish_command+0x81/0xc0
> [4294728.634000] [<c0318136>] scsi_softirq+0xc6/0x130
> [4294728.634000] [<c0123dc6>] __do_softirq+0xc6/0xe0
> [4294728.634000] [<c012436e>] ksoftirqd+0xde/0x100
> [4294728.634000] [<c0124290>] ksoftirqd+0x0/0x100
> [4294728.634000] [<c0132337>] kthread+0xa7/0xb0
> [4294728.634000] [<c0132290>] kthread+0x0/0xb0
> [4294728.634000] [<c01010cd>] kernel_thread_helper+0x5/0x18
> [4294728.634000] Code: 00 85 f6 74 0b f0 ff 4e 28 0f 94 c0 84 c0 75 4d 83 e7
> 08 75 34 be 00 e0 ff ff 21 e6 8b 0e 89 4d e4 8b 41 14 85 c0 79 1a 8b 46 08
> <30> a0 71 f7 a8 08 89 7e 14 0f 85 bc f9 ff ff 8d 65 f4 5b 5e 5f
> [4294728.634000] <6>note: ksoftirqd/1[6] exited with preempt_count 1
> [4294728.634000] Unable to handle kernel paging request at virtual address
> 08a8f771
> [4294728.634000] printing eip:
> [4294728.634000] c03fe74b
> [4294728.634000] *pde = 00000000
> [4294728.634000] Oops: 0002 [#4]
> [4294728.634000] PREEMPT SMP
> [4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
> snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
> i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
> [4294728.634000] CPU: 1
> [4294728.634000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
> [4294728.634000] EFLAGS: 00010286 (2.6.14.5-tc3)
> [4294728.634000] EIP is at schedule+0x66b/0xd10
> [4294728.634000] eax: 00000000 ebx: c1d5fa50 ecx: c1d56540 edx: 10000001
>
> ------------- example 4 ------------------------------------------------------
> [4294724.723000] scheduling while atomic: S35quota/0xffffffff/3508
> [4294724.723000] Unable to handle kernel NULL pointer dereference at virtual
> address 0000005b
> [4294724.723000] printing eip:
> [4294724.723000] c03fe74b
> [4294724.723000] *pde = 00000000
> [4294724.723000] Oops: 0002 [#1]
> [4294724.723000] PREEMPT SMP
> [4294724.723000] Modules linked in: dm_mod eeprom lm85 hwmon_vid i2c_isa
> usbhid snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss
> snd_pcm uhci_hcd snd_timer i2c_i801 intel_agp ehci_hcd snd i2c_core
> snd_page_alloc usbcore agpgart
> [4294724.723000] CPU: 1
> [4294724.723000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
> [4294724.723000] EFLAGS: 00010286 (2.6.14.5-tc3)
> [4294724.723000] EIP is at schedule+0x66b/0xd10
> [4294724.723000] eax: 00000000 ebx: c1d56030 ecx: f75b6030 edx: 00010001
> [4294724.723000] esi: f70f4000 edi: 00000000 ebp: c03fe767 esp: f70f5ac4
> [4294724.723000] ds: 0f3b es: 0f3b ss: 0f28
> [4294724.723000] Process S35quota (pid: 3508, threadinfo=f70f4000
> task=f75b6030)
> [4294724.723000] Stack: f70f4000 c0000000 f7b536bc 00000000 c037cda5 f7b54380
> f70f5b3c 00000060
> [4294724.723000] f70f5b14 00000000 c03f4618 f7b54380 f70f5b3c f70f5b14
> 00000001 00000060
> [4294724.723000] c1c0b420 00000000 00000000 8585c2c0 000f4207 00000206
> f75b6030 f75b6158
> [4294724.723000] Call Trace:
> [4294724.723000] [<c037cda5>] kernel_sendmsg+0x35/0x40
> [4294724.723000] [<c03f4618>] xdr_sendpages+0xa8/0x280
> [4294724.723000] [<c011ae68>] __wake_up+0x28/0x40
> [4294724.724000] [<c013fb78>] mempool_free+0x78/0x80
> [4294724.724000] [<c03ee5db>] rpc_default_free_task+0x1b/0x40
> [4294724.724000] [<c012a884>] sigprocmask+0x64/0x100
> [4294724.724000] [<c012a884>] sigprocmask+0x64/0x100
> [4294724.724000] [<c03e9fbe>] rpc_clnt_sigunmask+0xe/0x20
> [4294724.724000] [<c01ff761>] nfs3_rpc_wrapper+0x61/0x70
> [4294724.724000] [<c01406e8>] prep_new_page+0x58/0x60
> [4294724.724000] [<c0140c9c>] buffered_rmqueue+0x11c/0x230
> [4294724.724000] [<c0141232>] __alloc_pages+0x3c2/0x400
> [4294724.724000] [<c0141114>] __alloc_pages+0x2a4/0x400
> [4294724.724000] [<c0143e01>] kmem_getpages+0x61/0x80
> [4294724.724000] [<c0144b55>] cache_grow+0xd5/0x140
> [4294724.724000] [<c0144b94>] cache_grow+0x114/0x140
> [4294724.724000] [<c0144d0a>] cache_alloc_refill+0x14a/0x1f0
> [4294724.724000] [<c0144cdb>] cache_alloc_refill+0x11b/0x1f0
> [4294724.724000] [<c0145023>] __kmalloc+0x63/0x70
> [4294724.724000] [<c0380e49>] __alloc_skb+0x49/0x130
> [4294724.724000] [<c02d6baf>] boomerang_start_xmit+0x13f/0x350
> [4294724.724000] [<c0295dd1>] scrup+0xb1/0xc0
> [4294724.724000] [<c0246964>] vgacon_cursor+0x144/0x190
> [4294724.724000] [<c029734d>] lf+0x3d/0x50
> [4294724.724000] [<c0299369>] vt_console_print+0x1c9/0x280
> [4294724.724000] [<c011f139>] __call_console_drivers+0x49/0x50
> [4294724.724000] [<c011f22c>] call_console_drivers+0x7c/0x110
> [4294724.724000] [<c011f722>] release_console_sem+0x42/0xb0
> [4294724.724000] [<c011f572>] vprintk+0x192/0x280
> [4294724.724000] [<c02d723a>] boomerang_interrupt+0xda/0x400
> [4294724.724000] [<c02d738d>] boomerang_interrupt+0x22d/0x400
> [4294724.724000] [<f88f2731>] snd_intel8x0_interrupt+0x51/0x220
> [snd_intel8x0]
> [4294724.724000] [<c011f3cf>] printk+0xf/0x20
> [4294724.724000] [<c03fedda>] schedule+0xcfa/0xd10
> [4294724.724000] [<c0123dc6>] __do_softirq+0xc6/0xe0
> [4294724.724000] [<c0102d77>] do_notify_resume2+0x17/0x20
> [4294724.724000] [<c0102f00>] restore_all2+0x0/0x18
> [4294724.724000] [<c0110f3b>] machine_emergency_restart+0x4b/0xe0
> [4294724.724000] [<c03fef45>] wait_for_completion+0x85/0xd0
> [4294724.724000] [<c011adc0>][
>
>
> ------------- Full log ----------------------------------------------
> [4294667.296000] Linux version 2.6.14.5-tc3 (bernd@hamilton1) (gcc version
> 3.3.5 (Debian 1:3.3.5-13)) #3 SMP PREEMPT Thu Jan 5 16:50:57 CET 2006
> [4294667.296000] BIOS-provided physical RAM map:
> [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> [4294667.296000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> [4294667.296000] BIOS-e820: 0000000000100000 - 000000005fe30000 (usable)
> [4294667.296000] BIOS-e820: 000000005fe30000 - 000000005fe3e20b (ACPI NVS)
> [4294667.296000] BIOS-e820: 000000005fe3e20b - 000000005ff30000 (usable)
> [4294667.296000] BIOS-e820: 000000005ff30000 - 000000005ff40000 (ACPI data)
> [4294667.296000] BIOS-e820: 000000005ff40000 - 000000005fff0000 (ACPI NVS)
> [4294667.296000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
> [4294667.296000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
> [4294667.296000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> [4294667.296000] 639MB HIGHMEM available.
> [4294667.296000] 896MB LOWMEM available.
> [4294667.296000] found SMP MP-table at 000ff780
> [4294667.296000] DMI 2.3 present.
> [4294667.296000] ACPI: PM-Timer IO Port: 0x408
> [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [4294667.296000] Processor #0 15:2 APIC version 20
> [4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [4294667.296000] Processor #1 15:2 APIC version 20
> [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> [4294667.296000] Using ACPI for processor (LAPIC) configuration information
> [4294667.296000] Intel MultiProcessor Specification v1.4
> [4294667.296000] Virtual Wire compatibility mode.
> [4294667.296000] OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000
> [4294667.296000] I/O APIC #2 Version 32 at 0xFEC00000.
> [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [4294667.296000] Processors: 2
> [4294667.296000] Allocating PCI resources starting at 70000000 (gap:
> 60000000:9ecf0000)
> [4294667.296000] Built 1 zonelists
> [4294667.296000] Kernel command line: initrd=client_initrd-l26.unfs3
> root=/dev/ram0 rw apm=power-off mce pci=noacpi
> netconsole=4444@129.206.21.51/eth0,5555@129.206.21.136/00:04:75:BF:B9:4A
> BOOT_IMAGE=linux-2.6.14.5-tc3
> ip=129.206.21.51:129.206.21.201:129.206.21.1:255.255.255.0
> [4294667.296000] netconsole: local port 4444
> [4294667.296000] netconsole: local IP 129.206.21.51
> [4294667.296000] netconsole: interface eth0
> [4294667.296000] netconsole: remote port 5555
> [4294667.296000] netconsole: remote IP 129.206.21.136
> [4294667.296000] netconsole: remote ethernet address 00:04:75:bf:b9:4a
> [4294667.296000] Initializing CPU#0
> [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
> [4294667.296000] Detected 2594.205 MHz processor.
> [4294667.296000] Using pmtmr for high-res timesource
> [4294667.296000] Console: colour VGA+ 80x25
> [4294670.096000] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes)
> [4294670.096000] Inode-cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [4294670.162000] Memory: 1548480k/1572032k available (3078k kernel code,
> 22316k reserved, 1183k data, 236k init, 654468k highmem)
> [4294670.162000] Checking if this processor honours the WP bit even in
> supervisor mode... Ok.
> [4294670.222000] Calibrating delay using timer specific routine.. 5190.56
> BogoMIPS (lpj=2595281)
> [4294670.222000] Mount-cache hash table entries: 512
> [4294670.222000] CPU: Trace cache: 12K uops, L1 D cache: 8K
> [4294670.222000] CPU: L2 cache: 512K
> [4294670.222000] CPU: Physical Processor ID: 0
> [4294670.222000] Intel machine check architecture supported.
> [4294670.222000] Intel machine check reporting enabled on CPU#0.
> [4294670.222000] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
> [4294670.222000] CPU0: Thermal monitoring enabled
> [4294670.222000] mtrr: v2.0 (20020519)
> [4294670.222000] Enabling fast FPU save and restore... done.
> [4294670.222000] Enabling unmasked SIMD FPU exception support... done.
> [4294670.222000] Checking 'hlt' instruction... OK.
> [4294670.227000] tbxface-0109 [02] load_tables : ACPI Tables
> successfully acquired
> [4294670.234000] Parsing all Control
> Methods:..................................................................................................................................................................................
> [4294670.249000] Table [DSDT](id 0005) - 633 Objects with 51 Devices 178
> Methods 22 Regions
> [4294670.249000] ACPI Namespace successfully loaded at root c058bfd8
> [4294670.249000] evxfevnt-0091 [03] enable : Transition to ACPI
> mode successful
> [4294670.249000] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
> [4294670.249000] Booting processor 1/1 eip 2000
> [4294670.259000] Initializing CPU#1
> [4294670.321000] Calibrating delay using timer specific routine.. 5186.27
> BogoMIPS (lpj=2593135)
> [4294670.321000] CPU: Trace cache: 12K uops, L1 D cache: 8K
> [4294670.321000] CPU: L2 cache: 512K
> [4294670.321000] CPU: Physical Processor ID: 0
> [4294670.321000] Intel machine check architecture supported.
> [4294670.321000] Intel machine check reporting enabled on CPU#1.
> [4294670.321000] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
> [4294670.321000] CPU1: Thermal monitoring enabled
> [4294670.321000] CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
> [4294670.321000] Total of 2 processors activated (10376.83 BogoMIPS).
> [4294670.321000] ENABLING IO-APIC IRQs
> [4294670.321000] ..TIMER: vector=0x31 pin1=2 pin2=0
> [4294670.432000] checking TSC synchronization across 2 CPUs: passed.
> [4294670.432000] softlockup thread 0 started up.
> [4294670.433000] Brought up 2 CPUs
> [4294670.433000] softlockup thread 1 started up.
> [4294670.433000] checking if image is initramfs...it isn't (bad gzip magic
> numbers); looks like an initrd
> [4294670.438000] Freeing initrd memory: 4096k freed
> [4294670.439000] NET: Registered protocol family 16
> [4294670.439000] ACPI: bus type pci registered
> [4294670.440000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
> [4294670.440000] PCI: Using configuration type 1
> [4294670.440000] ACPI: Subsystem revision 20050902
> [4294670.446000] evgpeblk-0988 [06] ev_create_gpe_block : GPE 00 to 1F
> [_GPE] 4 regs on int 0x9
> [4294670.447000] evgpeblk-0996 [06] ev_create_gpe_block : Found 9 Wake,
> Enabled 0 Runtime GPEs in this block
> [4294670.448000] Completing Region/Field/Buffer/Package
> initialization:......................................................................................................................
> [4294670.457000] Initialized 21/22 Regions 29/29 Fields 47/47 Buffers 21/21
> Packages (642 nodes)
> [4294670.457000] Executing all Device _STA and_INI
> methods:.......................................................
> [4294670.465000] 55 Devices found containing: 55 _STA, 1 _INI methods
> [4294670.465000] ACPI: Interpreter enabled
> [4294670.465000] ACPI: Using PIC for interrupt routing
> [4294670.484000] ACPI: Power Resource [URP1] (off)
> [4294670.484000] ACPI: Power Resource [FDDP] (off)
> [4294670.485000] ACPI: Power Resource [LPTP] (off)
> [4294670.494000] Linux Plug and Play Support v0.97 (c) Adam Belay
> [4294670.494000] SCSI subsystem initialized
> [4294670.494000] PCI: Probing PCI hardware
> [4294670.494000] PCI: Probing PCI hardware (bus 00)
> [4294670.501000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
> [4294670.501000] PCI quirk: region 0500-053f claimed by ICH4 GPIO
> [4294670.501000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> [4294670.502000] PCI: Transparent bridge - 0000:00:1e.0
> [4294670.520000] PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.3[A] -> IRQ 16
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 23
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 18
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.2[A] -> IRQ 18
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17
> [4294670.520000] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
> [4294670.520000] PCI->APIC IRQ transform: 0000:02:02.0[A] -> IRQ 17
> [4294670.527000] PCI: Bridge: 0000:00:01.0
> [4294670.527000] IO window: disabled.
> [4294670.527000] MEM window: fd900000-fe9fffff
> [4294670.527000] PREFETCH window: f1800000-f57fffff
> [4294670.527000] PCI: Bridge: 0000:00:1e.0
> [4294670.527000] IO window: b000-bfff
> [4294670.527000] MEM window: fea00000-feafffff
> [4294670.527000] PREFETCH window: 70000000-700fffff
> [4294670.527000] Machine check exception polling timer started.
> [4294670.527000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> [4294670.527000] apm: overridden by ACPI.
> [4294670.530000] highmem bounce pool size: 64 pages
> [4294670.530000] Total HugeTLB memory allocated, 0
> [4294670.530000] VFS: Disk quotas dquot_6.5.1
> [4294670.530000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [4294670.530000] Initializing Cryptographic API
> [4294670.530000] ACPI: Power Button (FF) [PWRF]
> [4294670.530000] ACPI: Sleep Button (CM) [SLPB]
> [4294670.531000] ACPI: CPU0 (power states: C1[C1])
> [4294670.531000] ACPI: Processor [CPU1] (supports 8 throttling states)
> [4294670.531000] ACPI: CPU1 (power states: C1[C1])
> [4294670.531000] ACPI: Processor [CPU2] (supports 8 throttling states)
> [4294670.531000] isapnp: Scanning for PnP cards...
> [4294670.888000] isapnp: No Plug & Play device found
> [4294670.911000] Real Time Clock Driver v1.12
> [4294670.911000] hw_random hardware driver 1.0.0 loaded
> [4294670.911000] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180
> seconds, margin is 60 seconds).
> [4294670.911000] Hangcheck: Using monotonic_clock().
> [4294670.912000] PNP: No PS/2 controller found. Probing ports directly.
> [4294670.914000] serio: i8042 AUX port at 0x60,0x64 irq 12
> [4294670.914000] serio: i8042 KBD port at 0x60,0x64 irq 1
> [4294670.914000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> sharing disabled
> [4294670.915000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [4294670.915000] io scheduler noop registered
> [4294670.915000] io scheduler anticipatory registered
> [4294670.915000] io scheduler deadline registered
> [4294670.915000] io scheduler cfq registered
> [4294670.915000] Floppy drive(s): fd0 is 1.44M
> [4294670.932000] FDC 0 is a National Semiconductor PC87306
> [4294670.933000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
> blocksize
> [4294670.933000] pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and
> petero2@telia.com
> [4294670.933000] Intel(R) PRO/1000 Network Driver - version 6.0.60-k2
> [4294670.933000] Copyright (c) 1999-2005 Intel Corporation.
> [4294670.934000] 3c59x: Donald Becker and others.
> www.scyld.com/network/vortex.html
> [4294670.934000] 0000:02:02.0: 3Com PCI 3c905C Tornado at 0xbc00. Vers
> LK1.1.19
> [4294670.956000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI
> [4294670.956000] e100: Copyright(c) 1999-2005 Intel Corporation
> [4294670.956000] netconsole: device eth0 not up yet, forcing it
> [4294670.956000] netconsole: carrier detect appears untrustworthy, waiting 4
> seconds
> [4294674.965000] netconsole: network logging started
> [4294674.965000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [4294674.965000] ide: Assuming 33MHz system bus speed for PIO modes; override
> with idebus=xx
> [4294674.965000] ICH5: IDE controller at PCI slot 0000:00:1f.1
> [4294674.965000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
> [4294674.965000] ICH5: chipset revision 2
> [4294674.965000] ICH5: not 100% native mode: will probe irqs later
> [4294674.966000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,
> hdb:pio
> [4294674.966000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA,
> hdd:pio
> [4294675.230000] hda: ST3120026A, ATA DISK drive
> [4294675.843000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [4294676.515000] hdc: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
> [4294676.821000] ide1 at 0x170-0x177,0x376 on irq 15
> [4294676.822000] hda: max request size: 1024KiB
> [4294676.822000] hda: 234441648 sectors (120034 MB) w/8192KiB Cache,
> CHS=16383/255/63, UDMA(100)
> [4294676.823000] hda: cache flushes supported
> [4294676.823000] hda: hda1 hda2 < hda5 hda6 hda7 >
> [4294676.867000] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
> [4294676.867000] Uniform CD-ROM driver Revision: 3.20
> [4294676.871000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00
> irq 18
> [4294676.871000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08
> irq 18
> [4294677.033000] ATA: abnormal status 0x7F on port 0xEC07
> [4294677.033000] scsi0 : ata_piix
> [4294677.195000] ATA: abnormal status 0x7F on port 0xE407
> [4294677.195000] scsi1 : ata_piix
> [4294677.198000] ieee1394: raw1394: /dev/raw1394 device initialized
> [4294677.198000] MC: drivers/edac/edac_mc.c version MC $Revision: 1.1.2.1 $
> [4294677.198000] mice: PS/2 mouse device common for all mice
> [4294677.199000] input: PC Speaker
> [4294677.199000] NET: Registered protocol family 2
> [4294677.214000] IP route cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [4294677.214000] TCP established hash table entries: 262144 (order: 9, 3145728
> bytes)
> [4294677.217000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
> [4294677.218000] TCP: Hash tables configured (established 262144 bind 65536)
> [4294677.218000] TCP reno registered
> [4294677.218000] ip_tables: (C) 2000-2002 Netfilter core team
> [4294677.249000] ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
> http://snowman.net/projects/ipt_recent/
> [4294677.249000] arp_tables: (C) 2002 David S. Miller
> [4294677.261000] TCP bic registered
> [4294677.261000] NET: Registered protocol family 1
> [4294677.261000] NET: Registered protocol family 17
> [4294677.262000] acpi_processor-0181 [03] processor_get_performa: Invalid _PCT
> data
> [4294677.262000] acpi_processor-0181 [03] processor_get_performa: Invalid _PCT
> data
> [4294677.262000] Starting balanced_irq
> [4294677.262000] Using IPI Shortcut mode
> [4294677.262000] RAMDISK: ext2 filesystem found at block 0
> [4294677.262000] RAMDISK: Loading 4096KiB [1 disk] into ram disk... done.
> [4294677.282000] EXT2-fs warning: checktime reached, running e2fsck is
> recommended
> [4294677.282000] VFS: Mounted root (ext2 filesystem).
> [4294677.282000] Freeing unused kernel memory: 236k freed
> [4294677.384000] input: AT Translated Set 2 keyboard on isa0060/serio0
> [4294711.121000] Linux agpgart interface v0.101 (c) Dave Jones
> [4294711.140000] usbcore: registered new driver usbfs
> [4294711.142000] usbcore: registered new driver hub
> [4294711.165000] acpi_bus-0200 [01] bus_set_power : Device is not
> power manageable
> [4294711.165000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [4294711.165000] ehci_hcd 0000:00:1d.7: debug port 1
> [4294711.166000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
> number 1
> [4294711.166000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
> [4294711.171000] agpgart: Detected an Intel 865 Chipset.
> [4294711.174000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver
> 10 Dec 2004
> [4294711.174000] usb usb1: Product: EHCI Host Controller
> [4294711.174000] usb usb1: Manufacturer: Linux 2.6.14.5-tc3 ehci_hcd
> [4294711.174000] usb usb1: SerialNumber: 0000:00:1d.7
> [4294711.175000] agpgart: AGP aperture is 64M @ 0xf8000000
> [4294711.185000] hub 1-0:1.0: USB hub found
> [4294711.185000] hub 1-0:1.0: 8 ports detected
> [4294711.246000] USB Universal Host Controller Interface driver v2.3
> [4294711.247000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [4294711.247000] uhci_hcd 0000:00:1d.0: detected 2 ports
> [4294711.289000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
> number 2
> [4294711.289000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
> [4294711.289000] usb usb2: Product: UHCI Host Controller
> [4294711.289000] usb usb2: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
> [4294711.289000] usb usb2: SerialNumber: 0000:00:1d.0
> [4294711.295000] hub 2-0:1.0: USB hub found
> [4294711.295000] hub 2-0:1.0: 2 ports detected
> [4294711.396000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [4294711.396000] uhci_hcd 0000:00:1d.1: detected 2 ports
> [4294711.397000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
> number 3
> [4294711.397000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
> [4294711.398000] usb usb3: Product: UHCI Host Controller
> [4294711.398000] usb usb3: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
> [4294711.398000] usb usb3: SerialNumber: 0000:00:1d.1
> [4294711.399000] hub 3-0:1.0: USB hub found
> [4294711.399000] hub 3-0:1.0: 2 ports detected
> [4294711.502000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [4294711.502000] uhci_hcd 0000:00:1d.2: detected 2 ports
> [4294711.504000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
> number 4
> [4294711.504000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
> [4294711.504000] usb usb4: Product: UHCI Host Controller
> [4294711.504000] usb usb4: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
> [4294711.504000] usb usb4: SerialNumber: 0000:00:1d.2
> [4294711.507000] hub 4-0:1.0: USB hub found
> [4294711.507000] hub 4-0:1.0: 2 ports detected
> [4294711.608000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [4294711.608000] uhci_hcd 0000:00:1d.3: detected 2 ports
> [4294711.610000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
> number 5
> [4294711.610000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
> [4294711.610000] usb usb5: Product: UHCI Host Controller
> [4294711.611000] usb usb5: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
> [4294711.611000] usb usb5: SerialNumber: 0000:00:1d.3
> [4294711.613000] hub 5-0:1.0: USB hub found
> [4294711.613000] hub 5-0:1.0: 2 ports detected
> [4294711.649000] usb 2-2: new low speed USB device using uhci_hcd and address
> 2
> [4294711.810000] usb 2-2: Product: USB-PS/2 Optical Mouse
> [4294711.810000] usb 2-2: Manufacturer: Logitech
> [4294712.030000] intel8x0_measure_ac97_clock: measured 51171 usecs
> [4294712.030000] intel8x0: clocking to 48000
> [4294712.570000] usbcore: registered new driver hiddev
> [4294712.594000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse]
> on usb-0000:00:1d.0-2
> [4294712.594000] usbcore: registered new driver usbhid
> [4294712.594000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> [4294713.984000] Adding 1951856k swap on /dev/hda5. Priority:-1 extents:1
> across:1951856k
> [4294717.697000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
> dm-devel@redhat.com
> [4294717.990000] ReiserFS: hda6: found reiserfs format "3.6" with standard
> journal
> [4294723.311000] ReiserFS: hda6: using ordered data mode
> [4294723.337000] ReiserFS: hda6: journal params: device hda6, size 8192,
> journal first block 18, max trans len 1024, max batch 900, max commit age 30,
> max trans age 30
> [4294723.337000] ReiserFS: hda6: checking transaction log (hda6)
> [4294723.348000] ReiserFS: hda6: replayed 2 transactions in 0 seconds
> [4294723.356000] ReiserFS: hda6: Using r5 hash to sort names
> [4294723.442000] ReiserFS: hda7: found reiserfs format "3.6" with standard
> journal
> [4294724.024000] ReiserFS: hda7: using ordered data mode
> [4294724.040000] ReiserFS: hda7: journal params: device hda7, size 8192,
> journal first block 18, max trans len 1024, max batch 900, max commit age 30,
> max trans age 30
> [4294724.041000] ReiserFS: hda7: checking transaction log (hda7)
> [4294724.051000] ReiserFS: hda7: replayed 2 transactions in 0 seconds
> [4294724.069000] ReiserFS: hda7: Using r5 hash to sort names
> [Oops 4]
>
>
> --
> Bernd Schubert
> Physikalisch Chemisches Institut / Theoretische Chemie
> Universität Heidelberg
> INF 229
> 69120 Heidelberg
> e-mail: bernd.schubert@pci.uni-heidelberg.de
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: a couple of oopses with 2.6.14
@ 2006-02-09 23:27 ` Andrew Morton
0 siblings, 0 replies; 11+ messages in thread
From: Andrew Morton @ 2006-02-09 23:27 UTC (permalink / raw)
To: bernd-schubert; +Cc: bernd.schubert, linux-kernel, linux-scsi
Bernd Schubert <bernd.schubert@pci.uni-heidelberg.de> wrote:
>
> Hi,
>
> here's a machine that works perfectly with 2.6.11, but gives oopes during the
> boot process with 2.6.14. Unfortunately its everytime another oops. Usually I
> would assume its a memory issue, but the machine really works perfectly with
> 2.6.11.
scsi has had a few problems with error recovery lately.
> We will run a memory test over the weekend, but so far I don't believe it will
> find anything.
No, I wouldn't bother doing that.
> ------------- example 1 ------------------------------------------------------
>
> [4294676.669000] scsi0 : ata_piix
> [4294676.831000] ATA: abnormal status 0x7F on port 0xE407
So we have a sata problem. It triggered two scsi bugs. The first (a
warning) is being fixed. I don't know if the second has been fixed.
Can you test 2.6.15?
> [4294676.831000] scsi1 : ata_piix
> [4294676.833000] scheduling while atomic: ksoftirqd/0/0x00000101/3
> [4294676.833000] [<c03feddf>] schedule+0xcff/0xd10
> [4294676.833000] [<c011af27>] complete+0x27/0x40
> [4294676.833000] [<c03ffd27>] __down+0x87/0xf0
> [4294676.833000] [<c011adc0>] default_wake_function+0x0/0x20
> [4294676.833000] [<c03fdce0>] klist_release+0x0/0x50
> [4294676.833000] [<c023734a>] kref_put+0x2a/0x80
> [4294676.833000] [<c03fe07f>] __down_failed+0x7/0xc
> [4294676.833000] [<c02aaad6>] .text.lock.main+0x28/0x42
> [4294676.833000] [<c02a6585>] device_del+0x35/0x60
> [4294676.833000] [<c031edf6>] scsi_target_reap+0x86/0xb0
> [4294676.833000] [<c03206f7>] scsi_device_dev_release+0xc7/0x120
> [4294676.833000] [<c02a6165>] device_release+0x45/0x50
> [4294676.833000] [<c0236a97>] kobject_cleanup+0x67/0x70
> [4294676.833000] [<c0236aa0>] kobject_release+0x0/0x10
> [4294676.833000] [<c023734a>] kref_put+0x2a/0x80
> [4294676.833000] [<c0236ac6>] kobject_put+0x16/0x20
> [4294676.833000] [<c0236aa0>] kobject_release+0x0/0x10
> [4294676.834000] [<c031cf91>] scsi_next_command+0x11/0x20
> [4294676.834000] [<c031d086>] scsi_end_request+0xa6/0xc0
> [4294676.834000] [<c031d40a>] scsi_io_completion+0x22a/0x490
> [4294676.834000] [<c031d899>] scsi_generic_done+0x29/0x40
> [4294676.834000] [<c0318251>] scsi_finish_command+0x81/0xc0
> [4294676.834000] [<c0318136>] scsi_softirq+0xc6/0x130
> [4294676.834000] [<c0123dc6>] __do_softirq+0xc6/0xe0
> [4294676.834000] [<c0123e15>] do_softirq+0x35/0x40
> [4294676.834000] [<c0124319>] ksoftirqd+0x89/0x100
> [4294676.834000] [<c0124290>] ksoftirqd+0x0/0x100
> [4294676.834000] [<c0132337>] kthread+0xa7/0xb0
> [4294676.834000] [<c0132290>] kthread+0x0/0xb0
> [4294676.834000] [<c01010cd>] kernel_thread_helper+0x5/0x18
> [4294676.834000] Unable to handle kernel NULL pointer dereference at virtual
> address 00000000
> [4294676.834000] printing eip:
> [4294676.834000] c031ce82
> [4294676.834000] *pde = 00000000
> [4294676.834000] Oops: 0000 [#1]
> [4294676.834000] PREEMPT SMP
> [4294676.834000] Modules linked in:
> [4294676.834000] CPU: 0
> [4294676.834000] EIP: 0f20:[<c031ce82>] Not tainted VLI
> [4294676.834000] EFLAGS: 00010246 (2.6.14.5-tc3)
> [4294676.834000] EIP is at scsi_run_queue+0x12/0xc0
> [4294676.834000] eax: 00000000 ebx: dfcddd9c ecx: dfd8009c edx: c0236aa0
> [4294676.834000] esi: dfcd9c80 edi: dfcc9b84 ebp: 00000202 esp: c1da5ed0
> [4294676.834000] ds: 0f3b es: 0f3b ss: 0f28
> [4294676.834000] Process ksoftirqd/0 (pid: 3, threadinfo=c1da4000
> task=c1d5aa50)
> [4294676.834000] Stack: dfcc9b84 dfcddd9c dfcd9c80 dfcc9b84 00000202 c031d086
> dfcc9b84 dfcddd9c
> [4294676.834000] dfcd9c80 00000024 dfffe800 00000024 c031d40a dfcd9c80
> 00000000 00000024
> [4294676.834000] 00000001 00000000 00000000 00000000 dfcc9b84 00000024
> 00040000 00000000
> [4294676.834000] Call Trace:
> [4294676.834000] [<c031d086>] scsi_end_request+0xa6/0xc0
> [4294676.834000] [<c031d40a>] scsi_io_completion+0x22a/0x490
> [4294676.834000] [<c031d899>] scsi_generic_done+0x29/0x40
> [4294676.834000] [<c0318251>] scsi_finish_command+0x81/0xc0
> [4294676.834000] [<c0318136>] scsi_softirq+0xc6/0x130
> [4294676.834000] [<c0123dc6>] __do_softirq+0xc6/0xe0
> [4294676.834000] [<c0123e15>] do_softirq+0x35/0x40
> [4294676.834000] [<c0124319>] ksoftirqd+0x89/0x100
> [4294676.834000] [<c0124290>] ksoftirqd+0x0/0x100
> [4294676.834000] [<c0132337>] kthread+0xa7/0xb0
> [4294676.834000] [<c0132290>] kthread+0x0/0xb0
> [4294676.834000] [<c01010cd>]<7>ieee1394: Initialized config rom entry
> `ip1394'
> [4294676.834000] kernel_thread_helper+0x5/0x18
> [4294676.834000] Code: 00 89 44 24 04 53 e8 <6>ieee1394: raw1394: /dev/raw1394
> device initialized
> [4294676.834000] 2e b6 ff <6>MC: drivers/edac/edac_mc.c version MC $Revision:
> 1.1.2.1 $
> [4294676.834000] ff 58 5a eb aa 8d 76 00 8d bc 27 00 00 00 00 55 57 56 53 51
> 8b 44 24 18 89 04 24 8b 80 f8 00 00 00 <8b> 38 f6 80 7d 01 00 00 80 0f 85 87
> 00 00 00 <6>mice: PS/2 mouse device common for all mice
> [4294676.834000] 8b 47 34 8d 6f 24
> [4294676.834000] <0>Kernel panic - not syncing: Fatal exception in interrupt
> [4294676.837000] [4294667.296000] Linux version 2.6.14.5-tc3
> (bernd@hamilton1) (gcc version 3.3.5 (Debian 1:3.3.5
>
> ------------- example 2 ------------------------------------------------------
> [4294708.516000] Unable to handle kernel paging request at virtual address
> 8d2311c4
> [4294708.516000] printing eip:
> [4294708.516000] c03fe70c
> [4294708.516000] *pde = 00000000
> [4294708.516000] Oops: 0000 [#1]
> [4294708.516000] PREEMPT SMP
> [4294708.516000] Modules linked in:
> [4294708.516000] CPU: 1
> [4294708.516000] EIP: 0f20:[<c03fe70c>] Not tainted VLI
> [4294708.516000] EFLAGS: 00010083 (2.6.14.5-tc3)
> [4294708.516000] EIP is at schedule+0x62c/0xd10
> [4294667.296000] Linux version 2.6.14.5-tc3 (bernd@hamilton1) (gcc version
> 3.3.5 (Debian 1:3.3.5-13)) #3 SMP PREEM
>
> ------------- example 3 ------------------------------------------------------
> [4294728.634000] Unable to handle kernel paging request------------[ cut
> here ]------------
> [4294728.634000] kernel BUG at arch/i386/mm/highmem.c:15!
> [4294728.634000] invalid operand: 0000 [#1]
> [4294728.634000] PREEMPT SMP
> [4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
> snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
> i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
> [4294728.634000] CPU: 1
> [4294728.634000] EIP: 0f20:[<c0118644>] Not tainted VLI
> [4294728.634000] EFLAGS: 00010206 (2.6.14.5-tc3)
> [4294728.634000] EIP is at kunmap+0x14/0x40
> [4294728.634000] eax: f75e2000 ebx: 0000003a ecx: c1beabc0 edx: ffffffff
> [4294728.634000] esi: 0001ff39 edi: ff932eff ebp: 00000000 esp: f75e3f48
> [4294728.634000] ds: 0f3b es: 0f3b ss: 0f28
> [4294728.634000] Process net.agent (pid: 3301, threadinfo=f75e2000
> task=f771a030)
> [4294728.634000] Stack: c0164282 c1beabc0 ff932eff c1beabc0 00000000 0001ff39
> 080f71c2 00000000
> [4294728.634000] ff932000 c1beabc0 f743f200 00000000 f75e2000 080f7868
> c0165781 ffffffff
> [4294728.634000] 080f7008 f743f200 080f7008 f761e000 f761e000 f75e2000
> c01019ee f761e000
> [4294728.634000] Call Trace:
> [4294728.634000] [<c0164282>] copy_strings+0x1d2/0x220
> [4294728.634000] [<c0165781>] do_execve+0x131/0x1f0
> [4294728.634000] [<c01019ee>] sys_execve+0x2e/0x90
> [4294728.634000] [<c0102e71>] sysenter_past_esp+0x5a/0x89
> [4294728.634000] [<c0100f3b>] mwait_idle+0x3b/0x50
> [4294728.634000] Code: 00 00 39 c2 74 05 e9 1c 13 03 00 89 c8 e9 55 0b 03 00
> 90 8d 74 26 00 b8 00 e0 ff ff 8b 4c 24 04 21 e0 f7 40 14 00 ff ff 0f 74 08
> <0f> 0b 0f 00 24 12 42 c0 8b 01 c1 e8 1e 8b 14 85 dc 95 52 c0 8b
> [4294728.634000] <6>note: net.agent[3301] exited with preempt_count -1
> [4294728.634000] at virtual address 08a8f771
> [4294728.634000] printing eip:
> [4294728.634000] c03fe74b
> [4294728.634000] *pde = 00000000
> [4294728.634000] Oops: 0002 [#2]
> [4294728.634000] PREEMPT SMP
> [4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
> snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
> i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
> [4294728.634000] CPU: 1
> [4294728.634000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
> [4294728.634000] EFLAGS: 00010286 (2.6.14.5-tc3)
> [4294728.634000] EIP is at schedule+0x66b/0xd10
> [4294728.634000] eax: 00000000 ebx: c1d56030 ecx: f771a030 edx: 00010001
> [4294728.634000] esi: f75e2000 edi: 00000000 ebp: c03fe767 esp: f75e3ac4
> [4294728.634000] ds: 0f3b es: 0f3b ss: 0f28
> [4294728.634000] Process net.agent (pid: 3301, threadinfo=f75e2000
> task=f771a030)
> [4294728.634000] Stack: f75e2000 c0000000 f7b7e360 00000000 c037cda5 00000000
> f75e3b3c 00000060
> [4294728.634000] f75e3b14 f775b030 00000013 dff81780 f7773d00 f775b030
> 00000000 c1c13d80
> [4294728.634000] c1c13420 00000001 00000000 6e93a040 000f4208 c1c138dc
> f771a030 f771a158
> [4294728.634000] Call Trace:
> [4294728.634000] [<c037cda5>] kernel_sendmsg+0x35/0x40
> [4294728.634000] [<c0343633>] sym_wide_nego+0xa3/0x130
> [4294728.634000] [<c0313530>] cdrom_end_request+0x70/0xf0
> [4294728.634000] [<c011ae90>] __wake_up_locked+0x10/0x20
> [4294728.634000] [<c0238aef>] __down_trylock+0x2f/0x50
> [4294728.634000] [<c03fe097>] __down_failed_trylock+0x7/0xc
> [4294728.634000] [<c011f5b1>] vprintk+0x1d1/0x280
> [4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
> [4294728.634000] [<c02399a9>] sprintf+0x19/0x20
> [4294728.634000] [<c011f3cf>] printk+0xf/0x20
> [4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
> [4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
> [4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
> [4294728.634000] [<c02d738d>] boomerang_interrupt+0x22d/0x400
> [4294728.634000] [<f8909731>] snd_intel8x0_interrupt+0x51/0x220
> [snd_intel8x0]
> [4294728.634000] [<c014a68e>] zap_pte_range+0x3e/0x290
> [4294728.634000] [<c014a77e>] zap_pte_range+0x12e/0x290
> [4294728.634000] [<c0103ecc>] invalidate_interrupt+0x1c/0x30
> [4294728.634000] [<c0112ec3>] flush_tlb_others+0x83/0xd0
> [4294728.634000] [<c0112fc9>] flush_tlb_mm+0x59/0xb0
> [4294728.634000] [<c014abe0>] unmap_vmas+0x250/0x290
> [4294728.634000] [<c014f100>] exit_mmap+0x80/0x160
> [4294728.634000] [<c011cd14>] mmput+0x24/0x80
> [4294728.634000] [<c01216d5>] do_exit+0xe5/0x420
> [4294728.634000] [<c0104706>] die+0x166/0x170
> [4294728.634000] [<c01048c0>] do_invalid_op+0x0/0x90
> [4294728.634000] [<c010493a>] do_invalid_op+0x7a/0x90
> [4294728.634000] [<c0118644>] kunmap+0x14/0x40
> [4294728.634000] [<c01499d0>] page_address+0x90/0xa0
> [4294728.634000] [<c01499d0>] page_address+0x90/0xa0
> [4294728.634000] [<c0149199>] kmap_high+0x19/0x190
> [4294728.634000] [<c0149298>] kmap_high+0x118/0x190
> [4294728.634000] [<c0141232>] __alloc_pages+0x3c2/0x400
> [4294728.634000] [<c0141114>] __alloc_pages+0x2a4/0x400
> [4294728.634000] [<c010402f>] error_code+0x4f/0x60
> [4294728.634000] [<c0118644>] kunmap+0x14/0x40
> [4294728.634000] [<c0164282>] copy_strings+0x1d2/0x220
> [4294728.634000] [<c0165781>] do_execve+0x131/0x1f0
> [4294728.634000] [<c01019ee>] sys_execve+0x2e/0x90
> [4294728.634000] [<c0102e71>] sysenter_past_esp+0x5a/0x89
> [4294728.634000] [<c0100f3b>] mwait_idle+0x3b/0x50
> [4294728.634000] Code: 00 85 f6 74 0b f0 ff 4e 28 0f 94 c0 84 c0 75 4d 83 e7
> 08 75 34 be 00 e0 ff ff 21 e6 8b 0e 89 4d e4 8b 41 14 85 c0 79 1a 8b 46 08
> <30> a0 71 f7 a8 08 89 7e 14 0f 85 bc f9 ff ff 8d 65 f4 5b 5e 5f
> [4294728.634000] <1>Fixing recursive fault but reboot is needed!
> [4294728.634000] scheduling while atomic: net.agent/0x00000002/3301
> [4294728.634000] [<c03feddf>] schedule+0xcff/0xd10
> [4294728.634000] [<c011f572>] vprintk+0x192/0x280
> [4294728.634000] [<c0123dc6>] __do_softirq+0xc6/0xe0
> [4294728.634000] [<c0123ef5>] irq_exit+0x45/0x50
> [4294728.634000] [<c0103f2c>] apic_timer_interrupt+0x1c/0x30
> [4294728.634000] [<c012199d>] do_exit+0x3ad/0x420
> [4294728.634000] [<c0104706>] die+0x166/0x170
> [4294728.634000] [<c03fe74b>] schedule+0x66b/0xd10
> [4294728.634000] [<c03fe74b>] schedule+0x66b/0xd10
> [4294728.634000] [<c0400c8c>] do_page_fault+0x28c/0x595
> [4294728.634000] [<c0400a00>] do_page_fault+0x0/0x595
> [4294728.634000] [<c03fe767>] schedule+0x687/0xd10
> [4294728.634000] [<c010402f>] error_code+0x4f/0x60
> [4294728.634000] [<c03fe767>] schedule+0x687/0xd10
> [4294728.634000] [<c03fe74b>] schedule+0x66b/0xd10
> [4294728.634000] [<c037cda5>] kernel_sendmsg+0x35/0x40
> [4294728.634000] [<c0343633>] sym_wide_nego+0xa3/0x130
> [4294728.634000] [<c0313530>] cdrom_end_request+0x70/0xf0
> [4294728.634000] [<c011ae90>] __wake_up_locked+0x10/0x20
> [4294728.634000] [<c0238aef>] __down_trylock+0x2f/0x50
> [4294728.634000] [<c03fe097>] __down_failed_trylock+0x7/0xc
> [4294728.634000] [<c011f5b1>] vprintk+0x1d1/0x280
> [4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
> [4294728.634000] [<c02399a9>] sprintf+0x19/0x20
> [4294728.634000] [<c011f3cf>] printk+0xf/0x20
> [4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
> [4294728.634000] [<c013a096>] __print_symbol+0x66/0xb0
> [4294728.634000] [<c023962c>] vsnprintf+0x25c/0x520
> [4294728.634000] [<c02d738d>] boomerang_interrupt+0x22d/0x400
> [4294728.634000] [<f8909731>] snd_intel8x0_interrupt+0x51/0x220
> [snd_intel8x0]
> [4294728.634000] [<c014a68e>] zap_pte_range+0x3e/0x290
> [4294728.634000] [<c014a77e>] zap_pte_range+0x12e/0x290
> [4294728.634000] [<c0103ecc>] invalidate_interrupt+0x1c/0x30
> [4294728.634000] [<c0112ec3>] flush_tlb_others+0x83/0xd0
> [4294728.634000] [<c0112fc9>] flush_tlb_mm+0x59/0xb0
> [4294728.634000] [<c014abe0>] unmap_vmas+0x250/0x290
> [4294728.634000] [<c014f100>] exit_mmap+0x80/0x160
> [4294728.634000] [<c011cd14>] mmput+0x24/0x80
> [4294728.634000] [<c01216d5>] do_exit+0xe5/0x420
> [4294728.634000] [<c0104706>] die+0x166/0x170
> [4294728.634000] [<c01048c0>] do_invalid_op+0x0/0x90
> [4294728.634000] [<c010493a>] do_invalid_op+0x7a/0x90
> [4294728.634000] [<c0118644>] kunmap+0x14/0x40
> [4294728.634000] [<c01499d0>] page_address+0x90/0xa0
> [4294728.634000] [<c01499d0>] page_address+0x90/0xa0
> [4294728.634000] [<c0149199>] kmap_high+0x19/0x190
> [4294728.634000] [<c0149298>] kmap_high+0x118/0x190
> [4294728.634000] [<c0141232>] __alloc_pages+0x3c2/0x400
> [4294728.634000] [<c0141114>] __alloc_pages+0x2a4/0x400
> [4294728.634000] [<c010402f>] error_code+0x4f/0x60
> [4294728.634000] [<c0118644>] kunmap+0x14/0x40
> [4294728.634000] [<c0164282>] copy_strings+0x1d2/0x220
> [4294728.634000] [<c0165781>] do_execve+0x131/0x1f0
> [4294728.634000] [<c01019ee>] sys_execve+0x2e/0x90
> [4294728.634000] [<c0102e71>] sysenter_past_esp+0x5a/0x89
> [4294728.634000] [<c0100f3b>] mwait_idle+0x3b/0x50
> [4294728.634000] Unable to handle kernel paging request at virtual address
> 08a8f771
> [4294728.634000] printing eip:
> [4294728.634000] c03fe74b
> [4294728.634000] *pde = 00000000
> [4294728.634000] Oops: 0002 [#3]
> [4294728.634000] PREEMPT SMP
> [4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
> snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
> i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
> [4294728.634000] CPU: 1
> [4294728.634000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
> [4294728.634000] EFLAGS: 00010286 (2.6.14.5-tc3)
> [4294728.634000] EIP is at schedule+0x66b/0xd10
> [4294728.634000] eax: 00000000 ebx: f771a030 ecx: c1d5fa50 edx: 00000001
> [4294728.634000] esi: c1dca000 edi: 00000000 ebp: c1dcbfb4 esp: c1dcbf40
> [4294728.634000] ds: 0f3b es: 0f3b ss: 0f28
> [4294728.634000] Process ksoftirqd/1 (pid: 6, threadinfo=c1dca000
> task=c1d5fa50)
> [4294728.634000] Stack: 00004074 dfd96c80 c031d899 dfd96c80 00000000 00000024
> c0318251 dfd96c80
> [4294728.634000] 00002002 dfd96c80 00004074 c1dcbf78 c0318136 dfd96c80
> c1dcbf78 c1dcbf78
> [4294728.634000] c1c13420 00000001 00000000 bf9f1680 000f41ff c0123dc6
> c1d5fa50 c1d5fb78
> [4294728.634000] Call Trace:
> [4294728.634000] [<c031d899>] scsi_generic_done+0x29/0x40
> [4294728.634000] [<c0318251>] scsi_finish_command+0x81/0xc0
> [4294728.634000] [<c0318136>] scsi_softirq+0xc6/0x130
> [4294728.634000] [<c0123dc6>] __do_softirq+0xc6/0xe0
> [4294728.634000] [<c012436e>] ksoftirqd+0xde/0x100
> [4294728.634000] [<c0124290>] ksoftirqd+0x0/0x100
> [4294728.634000] [<c0132337>] kthread+0xa7/0xb0
> [4294728.634000] [<c0132290>] kthread+0x0/0xb0
> [4294728.634000] [<c01010cd>] kernel_thread_helper+0x5/0x18
> [4294728.634000] Code: 00 85 f6 74 0b f0 ff 4e 28 0f 94 c0 84 c0 75 4d 83 e7
> 08 75 34 be 00 e0 ff ff 21 e6 8b 0e 89 4d e4 8b 41 14 85 c0 79 1a 8b 46 08
> <30> a0 71 f7 a8 08 89 7e 14 0f 85 bc f9 ff ff 8d 65 f4 5b 5e 5f
> [4294728.634000] <6>note: ksoftirqd/1[6] exited with preempt_count 1
> [4294728.634000] Unable to handle kernel paging request at virtual address
> 08a8f771
> [4294728.634000] printing eip:
> [4294728.634000] c03fe74b
> [4294728.634000] *pde = 00000000
> [4294728.634000] Oops: 0002 [#4]
> [4294728.634000] PREEMPT SMP
> [4294728.634000] Modules linked in: usbhid snd_intel8x0 snd_ac97_codec
> snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer i2c_i801 snd
> i2c_core snd_page_alloc ehci_hcd uhci_hcd usbcore intel_agp agpgart
> [4294728.634000] CPU: 1
> [4294728.634000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
> [4294728.634000] EFLAGS: 00010286 (2.6.14.5-tc3)
> [4294728.634000] EIP is at schedule+0x66b/0xd10
> [4294728.634000] eax: 00000000 ebx: c1d5fa50 ecx: c1d56540 edx: 10000001
>
> ------------- example 4 ------------------------------------------------------
> [4294724.723000] scheduling while atomic: S35quota/0xffffffff/3508
> [4294724.723000] Unable to handle kernel NULL pointer dereference at virtual
> address 0000005b
> [4294724.723000] printing eip:
> [4294724.723000] c03fe74b
> [4294724.723000] *pde = 00000000
> [4294724.723000] Oops: 0002 [#1]
> [4294724.723000] PREEMPT SMP
> [4294724.723000] Modules linked in: dm_mod eeprom lm85 hwmon_vid i2c_isa
> usbhid snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss
> snd_pcm uhci_hcd snd_timer i2c_i801 intel_agp ehci_hcd snd i2c_core
> snd_page_alloc usbcore agpgart
> [4294724.723000] CPU: 1
> [4294724.723000] EIP: 0f20:[<c03fe74b>] Not tainted VLI
> [4294724.723000] EFLAGS: 00010286 (2.6.14.5-tc3)
> [4294724.723000] EIP is at schedule+0x66b/0xd10
> [4294724.723000] eax: 00000000 ebx: c1d56030 ecx: f75b6030 edx: 00010001
> [4294724.723000] esi: f70f4000 edi: 00000000 ebp: c03fe767 esp: f70f5ac4
> [4294724.723000] ds: 0f3b es: 0f3b ss: 0f28
> [4294724.723000] Process S35quota (pid: 3508, threadinfo=f70f4000
> task=f75b6030)
> [4294724.723000] Stack: f70f4000 c0000000 f7b536bc 00000000 c037cda5 f7b54380
> f70f5b3c 00000060
> [4294724.723000] f70f5b14 00000000 c03f4618 f7b54380 f70f5b3c f70f5b14
> 00000001 00000060
> [4294724.723000] c1c0b420 00000000 00000000 8585c2c0 000f4207 00000206
> f75b6030 f75b6158
> [4294724.723000] Call Trace:
> [4294724.723000] [<c037cda5>] kernel_sendmsg+0x35/0x40
> [4294724.723000] [<c03f4618>] xdr_sendpages+0xa8/0x280
> [4294724.723000] [<c011ae68>] __wake_up+0x28/0x40
> [4294724.724000] [<c013fb78>] mempool_free+0x78/0x80
> [4294724.724000] [<c03ee5db>] rpc_default_free_task+0x1b/0x40
> [4294724.724000] [<c012a884>] sigprocmask+0x64/0x100
> [4294724.724000] [<c012a884>] sigprocmask+0x64/0x100
> [4294724.724000] [<c03e9fbe>] rpc_clnt_sigunmask+0xe/0x20
> [4294724.724000] [<c01ff761>] nfs3_rpc_wrapper+0x61/0x70
> [4294724.724000] [<c01406e8>] prep_new_page+0x58/0x60
> [4294724.724000] [<c0140c9c>] buffered_rmqueue+0x11c/0x230
> [4294724.724000] [<c0141232>] __alloc_pages+0x3c2/0x400
> [4294724.724000] [<c0141114>] __alloc_pages+0x2a4/0x400
> [4294724.724000] [<c0143e01>] kmem_getpages+0x61/0x80
> [4294724.724000] [<c0144b55>] cache_grow+0xd5/0x140
> [4294724.724000] [<c0144b94>] cache_grow+0x114/0x140
> [4294724.724000] [<c0144d0a>] cache_alloc_refill+0x14a/0x1f0
> [4294724.724000] [<c0144cdb>] cache_alloc_refill+0x11b/0x1f0
> [4294724.724000] [<c0145023>] __kmalloc+0x63/0x70
> [4294724.724000] [<c0380e49>] __alloc_skb+0x49/0x130
> [4294724.724000] [<c02d6baf>] boomerang_start_xmit+0x13f/0x350
> [4294724.724000] [<c0295dd1>] scrup+0xb1/0xc0
> [4294724.724000] [<c0246964>] vgacon_cursor+0x144/0x190
> [4294724.724000] [<c029734d>] lf+0x3d/0x50
> [4294724.724000] [<c0299369>] vt_console_print+0x1c9/0x280
> [4294724.724000] [<c011f139>] __call_console_drivers+0x49/0x50
> [4294724.724000] [<c011f22c>] call_console_drivers+0x7c/0x110
> [4294724.724000] [<c011f722>] release_console_sem+0x42/0xb0
> [4294724.724000] [<c011f572>] vprintk+0x192/0x280
> [4294724.724000] [<c02d723a>] boomerang_interrupt+0xda/0x400
> [4294724.724000] [<c02d738d>] boomerang_interrupt+0x22d/0x400
> [4294724.724000] [<f88f2731>] snd_intel8x0_interrupt+0x51/0x220
> [snd_intel8x0]
> [4294724.724000] [<c011f3cf>] printk+0xf/0x20
> [4294724.724000] [<c03fedda>] schedule+0xcfa/0xd10
> [4294724.724000] [<c0123dc6>] __do_softirq+0xc6/0xe0
> [4294724.724000] [<c0102d77>] do_notify_resume2+0x17/0x20
> [4294724.724000] [<c0102f00>] restore_all2+0x0/0x18
> [4294724.724000] [<c0110f3b>] machine_emergency_restart+0x4b/0xe0
> [4294724.724000] [<c03fef45>] wait_for_completion+0x85/0xd0
> [4294724.724000] [<c011adc0>][
>
>
> ------------- Full log ----------------------------------------------
> [4294667.296000] Linux version 2.6.14.5-tc3 (bernd@hamilton1) (gcc version
> 3.3.5 (Debian 1:3.3.5-13)) #3 SMP PREEMPT Thu Jan 5 16:50:57 CET 2006
> [4294667.296000] BIOS-provided physical RAM map:
> [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> [4294667.296000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> [4294667.296000] BIOS-e820: 0000000000100000 - 000000005fe30000 (usable)
> [4294667.296000] BIOS-e820: 000000005fe30000 - 000000005fe3e20b (ACPI NVS)
> [4294667.296000] BIOS-e820: 000000005fe3e20b - 000000005ff30000 (usable)
> [4294667.296000] BIOS-e820: 000000005ff30000 - 000000005ff40000 (ACPI data)
> [4294667.296000] BIOS-e820: 000000005ff40000 - 000000005fff0000 (ACPI NVS)
> [4294667.296000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
> [4294667.296000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
> [4294667.296000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> [4294667.296000] 639MB HIGHMEM available.
> [4294667.296000] 896MB LOWMEM available.
> [4294667.296000] found SMP MP-table at 000ff780
> [4294667.296000] DMI 2.3 present.
> [4294667.296000] ACPI: PM-Timer IO Port: 0x408
> [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [4294667.296000] Processor #0 15:2 APIC version 20
> [4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [4294667.296000] Processor #1 15:2 APIC version 20
> [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> [4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> [4294667.296000] Using ACPI for processor (LAPIC) configuration information
> [4294667.296000] Intel MultiProcessor Specification v1.4
> [4294667.296000] Virtual Wire compatibility mode.
> [4294667.296000] OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000
> [4294667.296000] I/O APIC #2 Version 32 at 0xFEC00000.
> [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [4294667.296000] Processors: 2
> [4294667.296000] Allocating PCI resources starting at 70000000 (gap:
> 60000000:9ecf0000)
> [4294667.296000] Built 1 zonelists
> [4294667.296000] Kernel command line: initrd=client_initrd-l26.unfs3
> root=/dev/ram0 rw apm=power-off mce pci=noacpi
> netconsole=4444@129.206.21.51/eth0,5555@129.206.21.136/00:04:75:BF:B9:4A
> BOOT_IMAGE=linux-2.6.14.5-tc3
> ip=129.206.21.51:129.206.21.201:129.206.21.1:255.255.255.0
> [4294667.296000] netconsole: local port 4444
> [4294667.296000] netconsole: local IP 129.206.21.51
> [4294667.296000] netconsole: interface eth0
> [4294667.296000] netconsole: remote port 5555
> [4294667.296000] netconsole: remote IP 129.206.21.136
> [4294667.296000] netconsole: remote ethernet address 00:04:75:bf:b9:4a
> [4294667.296000] Initializing CPU#0
> [4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
> [4294667.296000] Detected 2594.205 MHz processor.
> [4294667.296000] Using pmtmr for high-res timesource
> [4294667.296000] Console: colour VGA+ 80x25
> [4294670.096000] Dentry cache hash table entries: 131072 (order: 7, 524288
> bytes)
> [4294670.096000] Inode-cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [4294670.162000] Memory: 1548480k/1572032k available (3078k kernel code,
> 22316k reserved, 1183k data, 236k init, 654468k highmem)
> [4294670.162000] Checking if this processor honours the WP bit even in
> supervisor mode... Ok.
> [4294670.222000] Calibrating delay using timer specific routine.. 5190.56
> BogoMIPS (lpj=2595281)
> [4294670.222000] Mount-cache hash table entries: 512
> [4294670.222000] CPU: Trace cache: 12K uops, L1 D cache: 8K
> [4294670.222000] CPU: L2 cache: 512K
> [4294670.222000] CPU: Physical Processor ID: 0
> [4294670.222000] Intel machine check architecture supported.
> [4294670.222000] Intel machine check reporting enabled on CPU#0.
> [4294670.222000] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
> [4294670.222000] CPU0: Thermal monitoring enabled
> [4294670.222000] mtrr: v2.0 (20020519)
> [4294670.222000] Enabling fast FPU save and restore... done.
> [4294670.222000] Enabling unmasked SIMD FPU exception support... done.
> [4294670.222000] Checking 'hlt' instruction... OK.
> [4294670.227000] tbxface-0109 [02] load_tables : ACPI Tables
> successfully acquired
> [4294670.234000] Parsing all Control
> Methods:..................................................................................................................................................................................
> [4294670.249000] Table [DSDT](id 0005) - 633 Objects with 51 Devices 178
> Methods 22 Regions
> [4294670.249000] ACPI Namespace successfully loaded at root c058bfd8
> [4294670.249000] evxfevnt-0091 [03] enable : Transition to ACPI
> mode successful
> [4294670.249000] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
> [4294670.249000] Booting processor 1/1 eip 2000
> [4294670.259000] Initializing CPU#1
> [4294670.321000] Calibrating delay using timer specific routine.. 5186.27
> BogoMIPS (lpj=2593135)
> [4294670.321000] CPU: Trace cache: 12K uops, L1 D cache: 8K
> [4294670.321000] CPU: L2 cache: 512K
> [4294670.321000] CPU: Physical Processor ID: 0
> [4294670.321000] Intel machine check architecture supported.
> [4294670.321000] Intel machine check reporting enabled on CPU#1.
> [4294670.321000] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
> [4294670.321000] CPU1: Thermal monitoring enabled
> [4294670.321000] CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
> [4294670.321000] Total of 2 processors activated (10376.83 BogoMIPS).
> [4294670.321000] ENABLING IO-APIC IRQs
> [4294670.321000] ..TIMER: vector=0x31 pin1=2 pin2=0
> [4294670.432000] checking TSC synchronization across 2 CPUs: passed.
> [4294670.432000] softlockup thread 0 started up.
> [4294670.433000] Brought up 2 CPUs
> [4294670.433000] softlockup thread 1 started up.
> [4294670.433000] checking if image is initramfs...it isn't (bad gzip magic
> numbers); looks like an initrd
> [4294670.438000] Freeing initrd memory: 4096k freed
> [4294670.439000] NET: Registered protocol family 16
> [4294670.439000] ACPI: bus type pci registered
> [4294670.440000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
> [4294670.440000] PCI: Using configuration type 1
> [4294670.440000] ACPI: Subsystem revision 20050902
> [4294670.446000] evgpeblk-0988 [06] ev_create_gpe_block : GPE 00 to 1F
> [_GPE] 4 regs on int 0x9
> [4294670.447000] evgpeblk-0996 [06] ev_create_gpe_block : Found 9 Wake,
> Enabled 0 Runtime GPEs in this block
> [4294670.448000] Completing Region/Field/Buffer/Package
> initialization:......................................................................................................................
> [4294670.457000] Initialized 21/22 Regions 29/29 Fields 47/47 Buffers 21/21
> Packages (642 nodes)
> [4294670.457000] Executing all Device _STA and_INI
> methods:.......................................................
> [4294670.465000] 55 Devices found containing: 55 _STA, 1 _INI methods
> [4294670.465000] ACPI: Interpreter enabled
> [4294670.465000] ACPI: Using PIC for interrupt routing
> [4294670.484000] ACPI: Power Resource [URP1] (off)
> [4294670.484000] ACPI: Power Resource [FDDP] (off)
> [4294670.485000] ACPI: Power Resource [LPTP] (off)
> [4294670.494000] Linux Plug and Play Support v0.97 (c) Adam Belay
> [4294670.494000] SCSI subsystem initialized
> [4294670.494000] PCI: Probing PCI hardware
> [4294670.494000] PCI: Probing PCI hardware (bus 00)
> [4294670.501000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
> [4294670.501000] PCI quirk: region 0500-053f claimed by ICH4 GPIO
> [4294670.501000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> [4294670.502000] PCI: Transparent bridge - 0000:00:1e.0
> [4294670.520000] PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.3[A] -> IRQ 16
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 23
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 18
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.2[A] -> IRQ 18
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
> [4294670.520000] PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17
> [4294670.520000] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
> [4294670.520000] PCI->APIC IRQ transform: 0000:02:02.0[A] -> IRQ 17
> [4294670.527000] PCI: Bridge: 0000:00:01.0
> [4294670.527000] IO window: disabled.
> [4294670.527000] MEM window: fd900000-fe9fffff
> [4294670.527000] PREFETCH window: f1800000-f57fffff
> [4294670.527000] PCI: Bridge: 0000:00:1e.0
> [4294670.527000] IO window: b000-bfff
> [4294670.527000] MEM window: fea00000-feafffff
> [4294670.527000] PREFETCH window: 70000000-700fffff
> [4294670.527000] Machine check exception polling timer started.
> [4294670.527000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> [4294670.527000] apm: overridden by ACPI.
> [4294670.530000] highmem bounce pool size: 64 pages
> [4294670.530000] Total HugeTLB memory allocated, 0
> [4294670.530000] VFS: Disk quotas dquot_6.5.1
> [4294670.530000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [4294670.530000] Initializing Cryptographic API
> [4294670.530000] ACPI: Power Button (FF) [PWRF]
> [4294670.530000] ACPI: Sleep Button (CM) [SLPB]
> [4294670.531000] ACPI: CPU0 (power states: C1[C1])
> [4294670.531000] ACPI: Processor [CPU1] (supports 8 throttling states)
> [4294670.531000] ACPI: CPU1 (power states: C1[C1])
> [4294670.531000] ACPI: Processor [CPU2] (supports 8 throttling states)
> [4294670.531000] isapnp: Scanning for PnP cards...
> [4294670.888000] isapnp: No Plug & Play device found
> [4294670.911000] Real Time Clock Driver v1.12
> [4294670.911000] hw_random hardware driver 1.0.0 loaded
> [4294670.911000] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180
> seconds, margin is 60 seconds).
> [4294670.911000] Hangcheck: Using monotonic_clock().
> [4294670.912000] PNP: No PS/2 controller found. Probing ports directly.
> [4294670.914000] serio: i8042 AUX port at 0x60,0x64 irq 12
> [4294670.914000] serio: i8042 KBD port at 0x60,0x64 irq 1
> [4294670.914000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> sharing disabled
> [4294670.915000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [4294670.915000] io scheduler noop registered
> [4294670.915000] io scheduler anticipatory registered
> [4294670.915000] io scheduler deadline registered
> [4294670.915000] io scheduler cfq registered
> [4294670.915000] Floppy drive(s): fd0 is 1.44M
> [4294670.932000] FDC 0 is a National Semiconductor PC87306
> [4294670.933000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
> blocksize
> [4294670.933000] pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and
> petero2@telia.com
> [4294670.933000] Intel(R) PRO/1000 Network Driver - version 6.0.60-k2
> [4294670.933000] Copyright (c) 1999-2005 Intel Corporation.
> [4294670.934000] 3c59x: Donald Becker and others.
> www.scyld.com/network/vortex.html
> [4294670.934000] 0000:02:02.0: 3Com PCI 3c905C Tornado at 0xbc00. Vers
> LK1.1.19
> [4294670.956000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI
> [4294670.956000] e100: Copyright(c) 1999-2005 Intel Corporation
> [4294670.956000] netconsole: device eth0 not up yet, forcing it
> [4294670.956000] netconsole: carrier detect appears untrustworthy, waiting 4
> seconds
> [4294674.965000] netconsole: network logging started
> [4294674.965000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [4294674.965000] ide: Assuming 33MHz system bus speed for PIO modes; override
> with idebus=xx
> [4294674.965000] ICH5: IDE controller at PCI slot 0000:00:1f.1
> [4294674.965000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
> [4294674.965000] ICH5: chipset revision 2
> [4294674.965000] ICH5: not 100% native mode: will probe irqs later
> [4294674.966000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA,
> hdb:pio
> [4294674.966000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA,
> hdd:pio
> [4294675.230000] hda: ST3120026A, ATA DISK drive
> [4294675.843000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [4294676.515000] hdc: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
> [4294676.821000] ide1 at 0x170-0x177,0x376 on irq 15
> [4294676.822000] hda: max request size: 1024KiB
> [4294676.822000] hda: 234441648 sectors (120034 MB) w/8192KiB Cache,
> CHS=16383/255/63, UDMA(100)
> [4294676.823000] hda: cache flushes supported
> [4294676.823000] hda: hda1 hda2 < hda5 hda6 hda7 >
> [4294676.867000] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
> [4294676.867000] Uniform CD-ROM driver Revision: 3.20
> [4294676.871000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00
> irq 18
> [4294676.871000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08
> irq 18
> [4294677.033000] ATA: abnormal status 0x7F on port 0xEC07
> [4294677.033000] scsi0 : ata_piix
> [4294677.195000] ATA: abnormal status 0x7F on port 0xE407
> [4294677.195000] scsi1 : ata_piix
> [4294677.198000] ieee1394: raw1394: /dev/raw1394 device initialized
> [4294677.198000] MC: drivers/edac/edac_mc.c version MC $Revision: 1.1.2.1 $
> [4294677.198000] mice: PS/2 mouse device common for all mice
> [4294677.199000] input: PC Speaker
> [4294677.199000] NET: Registered protocol family 2
> [4294677.214000] IP route cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [4294677.214000] TCP established hash table entries: 262144 (order: 9, 3145728
> bytes)
> [4294677.217000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
> [4294677.218000] TCP: Hash tables configured (established 262144 bind 65536)
> [4294677.218000] TCP reno registered
> [4294677.218000] ip_tables: (C) 2000-2002 Netfilter core team
> [4294677.249000] ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
> http://snowman.net/projects/ipt_recent/
> [4294677.249000] arp_tables: (C) 2002 David S. Miller
> [4294677.261000] TCP bic registered
> [4294677.261000] NET: Registered protocol family 1
> [4294677.261000] NET: Registered protocol family 17
> [4294677.262000] acpi_processor-0181 [03] processor_get_performa: Invalid _PCT
> data
> [4294677.262000] acpi_processor-0181 [03] processor_get_performa: Invalid _PCT
> data
> [4294677.262000] Starting balanced_irq
> [4294677.262000] Using IPI Shortcut mode
> [4294677.262000] RAMDISK: ext2 filesystem found at block 0
> [4294677.262000] RAMDISK: Loading 4096KiB [1 disk] into ram disk... done.
> [4294677.282000] EXT2-fs warning: checktime reached, running e2fsck is
> recommended
> [4294677.282000] VFS: Mounted root (ext2 filesystem).
> [4294677.282000] Freeing unused kernel memory: 236k freed
> [4294677.384000] input: AT Translated Set 2 keyboard on isa0060/serio0
> [4294711.121000] Linux agpgart interface v0.101 (c) Dave Jones
> [4294711.140000] usbcore: registered new driver usbfs
> [4294711.142000] usbcore: registered new driver hub
> [4294711.165000] acpi_bus-0200 [01] bus_set_power : Device is not
> power manageable
> [4294711.165000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [4294711.165000] ehci_hcd 0000:00:1d.7: debug port 1
> [4294711.166000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
> number 1
> [4294711.166000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
> [4294711.171000] agpgart: Detected an Intel 865 Chipset.
> [4294711.174000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver
> 10 Dec 2004
> [4294711.174000] usb usb1: Product: EHCI Host Controller
> [4294711.174000] usb usb1: Manufacturer: Linux 2.6.14.5-tc3 ehci_hcd
> [4294711.174000] usb usb1: SerialNumber: 0000:00:1d.7
> [4294711.175000] agpgart: AGP aperture is 64M @ 0xf8000000
> [4294711.185000] hub 1-0:1.0: USB hub found
> [4294711.185000] hub 1-0:1.0: 8 ports detected
> [4294711.246000] USB Universal Host Controller Interface driver v2.3
> [4294711.247000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [4294711.247000] uhci_hcd 0000:00:1d.0: detected 2 ports
> [4294711.289000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
> number 2
> [4294711.289000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
> [4294711.289000] usb usb2: Product: UHCI Host Controller
> [4294711.289000] usb usb2: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
> [4294711.289000] usb usb2: SerialNumber: 0000:00:1d.0
> [4294711.295000] hub 2-0:1.0: USB hub found
> [4294711.295000] hub 2-0:1.0: 2 ports detected
> [4294711.396000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [4294711.396000] uhci_hcd 0000:00:1d.1: detected 2 ports
> [4294711.397000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
> number 3
> [4294711.397000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
> [4294711.398000] usb usb3: Product: UHCI Host Controller
> [4294711.398000] usb usb3: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
> [4294711.398000] usb usb3: SerialNumber: 0000:00:1d.1
> [4294711.399000] hub 3-0:1.0: USB hub found
> [4294711.399000] hub 3-0:1.0: 2 ports detected
> [4294711.502000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [4294711.502000] uhci_hcd 0000:00:1d.2: detected 2 ports
> [4294711.504000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
> number 4
> [4294711.504000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
> [4294711.504000] usb usb4: Product: UHCI Host Controller
> [4294711.504000] usb usb4: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
> [4294711.504000] usb usb4: SerialNumber: 0000:00:1d.2
> [4294711.507000] hub 4-0:1.0: USB hub found
> [4294711.507000] hub 4-0:1.0: 2 ports detected
> [4294711.608000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [4294711.608000] uhci_hcd 0000:00:1d.3: detected 2 ports
> [4294711.610000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
> number 5
> [4294711.610000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
> [4294711.610000] usb usb5: Product: UHCI Host Controller
> [4294711.611000] usb usb5: Manufacturer: Linux 2.6.14.5-tc3 uhci_hcd
> [4294711.611000] usb usb5: SerialNumber: 0000:00:1d.3
> [4294711.613000] hub 5-0:1.0: USB hub found
> [4294711.613000] hub 5-0:1.0: 2 ports detected
> [4294711.649000] usb 2-2: new low speed USB device using uhci_hcd and address
> 2
> [4294711.810000] usb 2-2: Product: USB-PS/2 Optical Mouse
> [4294711.810000] usb 2-2: Manufacturer: Logitech
> [4294712.030000] intel8x0_measure_ac97_clock: measured 51171 usecs
> [4294712.030000] intel8x0: clocking to 48000
> [4294712.570000] usbcore: registered new driver hiddev
> [4294712.594000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse]
> on usb-0000:00:1d.0-2
> [4294712.594000] usbcore: registered new driver usbhid
> [4294712.594000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> [4294713.984000] Adding 1951856k swap on /dev/hda5. Priority:-1 extents:1
> across:1951856k
> [4294717.697000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
> dm-devel@redhat.com
> [4294717.990000] ReiserFS: hda6: found reiserfs format "3.6" with standard
> journal
> [4294723.311000] ReiserFS: hda6: using ordered data mode
> [4294723.337000] ReiserFS: hda6: journal params: device hda6, size 8192,
> journal first block 18, max trans len 1024, max batch 900, max commit age 30,
> max trans age 30
> [4294723.337000] ReiserFS: hda6: checking transaction log (hda6)
> [4294723.348000] ReiserFS: hda6: replayed 2 transactions in 0 seconds
> [4294723.356000] ReiserFS: hda6: Using r5 hash to sort names
> [4294723.442000] ReiserFS: hda7: found reiserfs format "3.6" with standard
> journal
> [4294724.024000] ReiserFS: hda7: using ordered data mode
> [4294724.040000] ReiserFS: hda7: journal params: device hda7, size 8192,
> journal first block 18, max trans len 1024, max batch 900, max commit age 30,
> max trans age 30
> [4294724.041000] ReiserFS: hda7: checking transaction log (hda7)
> [4294724.051000] ReiserFS: hda7: replayed 2 transactions in 0 seconds
> [4294724.069000] ReiserFS: hda7: Using r5 hash to sort names
> [Oops 4]
>
>
> --
> Bernd Schubert
> Physikalisch Chemisches Institut / Theoretische Chemie
> Universität Heidelberg
> INF 229
> 69120 Heidelberg
> e-mail: bernd.schubert@pci.uni-heidelberg.de
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: a couple of oopses with 2.6.14
2006-02-09 23:27 ` Andrew Morton
(?)
@ 2006-02-09 23:41 ` James Bottomley
-1 siblings, 0 replies; 11+ messages in thread
From: James Bottomley @ 2006-02-09 23:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: bernd-schubert, bernd.schubert, linux-kernel, linux-scsi
On Thu, 2006-02-09 at 15:27 -0800, Andrew Morton wrote:
> So we have a sata problem. It triggered two scsi bugs. The first (a
> warning) is being fixed. I don't know if the second has been fixed.
The second should be fixed by this:
author goggin, edward <egoggin@emc.com> Tue, 8 Nov 2005 20:02:23 +0000
(15:02 -0500)
commit 34ea80ec6a02ad02e6b9c75c478c18e5880d6713
[SCSI] fix usb storage oops
The problem is that scsi_run_queue is called from scsi_next_command()
after doing a scsi_put_command. If the command was the only thing
holding the reference on the scsi_device then the resulting device put
will tear down the block queue. Fix this by taking a reference to the
device and holding it around scsi_run_queue()
James
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: a couple of oopses with 2.6.14
2006-02-09 23:27 ` Andrew Morton
@ 2006-02-10 0:32 ` Bernd Schubert
-1 siblings, 0 replies; 11+ messages in thread
From: Bernd Schubert @ 2006-02-10 0:32 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, James Bottomley, linux-scsi
Hello Andrew and James,
thanks for your help.
On Friday 10 February 2006 00:27, Andrew Morton wrote:
> Bernd Schubert <bernd.schubert@pci.uni-heidelberg.de> wrote:
> > Hi,
> >
> > here's a machine that works perfectly with 2.6.11, but gives oopes during
> > the boot process with 2.6.14. Unfortunately its everytime another oops.
> > Usually I would assume its a memory issue, but the machine really works
> > perfectly with 2.6.11.
>
> scsi has had a few problems with error recovery lately.
>
> > We will run a memory test over the weekend, but so far I don't believe it
> > will find anything.
>
> No, I wouldn't bother doing that.
Ok.
>
> > ------------- example 1
> > ------------------------------------------------------
> >
> > [4294676.669000] scsi0 : ata_piix
> > [4294676.831000] ATA: abnormal status 0x7F on port 0xE407
>
> So we have a sata problem. It triggered two scsi bugs. The first (a
> warning) is being fixed. I don't know if the second has been fixed.
I'm not sure if its only a sata problem, I saw several of other oopses, one
was related to Firewire/scsi (ok, could be a consequence of the previous sata
problem), one came from bluesmoke (external patch) and some of them I
couldn't associate to anything (but those I couldn't also capture via
netconsole).
>
> Can you test 2.6.15?
>
Sure, I will test 2.6.15 this evening. I will also enable most debugging
information for this testkernel, ok?
Thanks,
Bernd
PS: For production we unfortunately can't use 2.6.15 - reiserfs trouble (well,
I could try to revert commit 5fa8ad644faa114c4190484ac50e15236fc7cdd9, but
I'm still waiting for an offical statement of the reiserfs poeple) and
Win4Lin patches are available up to 2.6.14 only (its the PC of our secretary
and she really wouldn't like that ;) ).
--
Bernd Schubert
PCI / Theoretische Chemie
Universität Heidelberg
INF 229
69120 Heidelberg
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: a couple of oopses with 2.6.14
@ 2006-02-10 0:32 ` Bernd Schubert
0 siblings, 0 replies; 11+ messages in thread
From: Bernd Schubert @ 2006-02-10 0:32 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, James Bottomley, linux-scsi
Hello Andrew and James,
thanks for your help.
On Friday 10 February 2006 00:27, Andrew Morton wrote:
> Bernd Schubert <bernd.schubert@pci.uni-heidelberg.de> wrote:
> > Hi,
> >
> > here's a machine that works perfectly with 2.6.11, but gives oopes during
> > the boot process with 2.6.14. Unfortunately its everytime another oops.
> > Usually I would assume its a memory issue, but the machine really works
> > perfectly with 2.6.11.
>
> scsi has had a few problems with error recovery lately.
>
> > We will run a memory test over the weekend, but so far I don't believe it
> > will find anything.
>
> No, I wouldn't bother doing that.
Ok.
>
> > ------------- example 1
> > ------------------------------------------------------
> >
> > [4294676.669000] scsi0 : ata_piix
> > [4294676.831000] ATA: abnormal status 0x7F on port 0xE407
>
> So we have a sata problem. It triggered two scsi bugs. The first (a
> warning) is being fixed. I don't know if the second has been fixed.
I'm not sure if its only a sata problem, I saw several of other oopses, one
was related to Firewire/scsi (ok, could be a consequence of the previous sata
problem), one came from bluesmoke (external patch) and some of them I
couldn't associate to anything (but those I couldn't also capture via
netconsole).
>
> Can you test 2.6.15?
>
Sure, I will test 2.6.15 this evening. I will also enable most debugging
information for this testkernel, ok?
Thanks,
Bernd
PS: For production we unfortunately can't use 2.6.15 - reiserfs trouble (well,
I could try to revert commit 5fa8ad644faa114c4190484ac50e15236fc7cdd9, but
I'm still waiting for an offical statement of the reiserfs poeple) and
Win4Lin patches are available up to 2.6.14 only (its the PC of our secretary
and she really wouldn't like that ;) ).
--
Bernd Schubert
PCI / Theoretische Chemie
Universität Heidelberg
INF 229
69120 Heidelberg
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: a couple of oopses with 2.6.14
2006-02-09 23:27 ` Andrew Morton
@ 2006-02-10 18:24 ` Bernd Schubert
-1 siblings, 0 replies; 11+ messages in thread
From: Bernd Schubert @ 2006-02-10 18:24 UTC (permalink / raw)
To: Andrew Morton, James Bottomley; +Cc: linux-kernel, linux-scsi
> Can you test 2.6.15?
Yes, 2.6.15.3 works, no oopses. Only this information
[4294743.341000] scsi0 : ata_piix
[4294743.514000] ATA: abnormal status 0x7F on port 0xE407
I can't test if sata works, there's just nothing connected.
Btw, the printk timing information seem to be uninitalized, is this by
intentention or is it a bug?
Thanks,
Bernd
--
Bernd Schubert
Physikalisch Chemisches Institut / Theoretische Chemie
Universität Heidelberg
INF 229
69120 Heidelberg
e-mail: bernd.schubert@pci.uni-heidelberg.de
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: a couple of oopses with 2.6.14
@ 2006-02-10 18:24 ` Bernd Schubert
0 siblings, 0 replies; 11+ messages in thread
From: Bernd Schubert @ 2006-02-10 18:24 UTC (permalink / raw)
To: Andrew Morton, James Bottomley; +Cc: linux-kernel, linux-scsi
> Can you test 2.6.15?
Yes, 2.6.15.3 works, no oopses. Only this information
[4294743.341000] scsi0 : ata_piix
[4294743.514000] ATA: abnormal status 0x7F on port 0xE407
I can't test if sata works, there's just nothing connected.
Btw, the printk timing information seem to be uninitalized, is this by
intentention or is it a bug?
Thanks,
Bernd
--
Bernd Schubert
Physikalisch Chemisches Institut / Theoretische Chemie
Universität Heidelberg
INF 229
69120 Heidelberg
e-mail: bernd.schubert@pci.uni-heidelberg.de
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: a couple of oopses with 2.6.14
2006-02-10 18:24 ` Bernd Schubert
(?)
@ 2006-02-10 19:29 ` Andrew Morton
2006-02-10 19:51 ` Bernd Schubert
-1 siblings, 1 reply; 11+ messages in thread
From: Andrew Morton @ 2006-02-10 19:29 UTC (permalink / raw)
To: bernd-schubert
Cc: bernd.schubert, James.Bottomley, linux-kernel, linux-scsi,
Jeff Garzik
Bernd Schubert <bernd.schubert@pci.uni-heidelberg.de> wrote:
>
> > Can you test 2.6.15?
>
> Yes, 2.6.15.3 works, no oopses.
Some progress.
> Only this information
>
> [4294743.341000] scsi0 : ata_piix
> [4294743.514000] ATA: abnormal status 0x7F on port 0xE407
>
> I can't test if sata works, there's just nothing connected.
Has this machine's sata support ever worked? If so, in which kernel?
(Apologies if you've already described this).
> Btw, the printk timing information seem to be uninitalized, is this by
> intentention or is it a bug?
It's expected. We use a very raw, low-level funtion for the printk
timestamping because we don't want to be taking locks from within printk.
The timestamping is mainly for working out the time duration between
printk's, rather than for absolute time.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: a couple of oopses with 2.6.14
2006-02-10 19:29 ` Andrew Morton
@ 2006-02-10 19:51 ` Bernd Schubert
0 siblings, 0 replies; 11+ messages in thread
From: Bernd Schubert @ 2006-02-10 19:51 UTC (permalink / raw)
To: Andrew Morton; +Cc: James.Bottomley, linux-kernel, linux-scsi, Jeff Garzik
On Friday 10 February 2006 20:29, Andrew Morton wrote:
> Bernd Schubert <bernd.schubert@pci.uni-heidelberg.de> wrote:
> > > Can you test 2.6.15?
> >
> > Yes, 2.6.15.3 works, no oopses.
>
> Some progress.
>
> > Only this information
> >
> > [4294743.341000] scsi0 : ata_piix
> > [4294743.514000] ATA: abnormal status 0x7F on port 0xE407
> >
> > I can't test if sata works, there's just nothing connected.
>
> Has this machine's sata support ever worked? If so, in which kernel?
> (Apologies if you've already described this).
Don't know, there was never anything connected to the sata ports. It was also
just an accident that sata was compiled statically into the kernel.
Though, with 2.6.11 we don't get the warnings:
libata version 1.10 loaded.
ata_piix version 1.03
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 18
ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 18
ata1: SATA port has no device.
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
ieee1394: Initialized config rom entry `ip1394'
>
> > Btw, the printk timing information seem to be uninitalized, is this by
> > intentention or is it a bug?
>
> It's expected. We use a very raw, low-level funtion for the printk
> timestamping because we don't want to be taking locks from within printk.
> The timestamping is mainly for working out the time duration between
> printk's, rather than for absolute time.
Ah, I see.
Thanks,
Bernd
--
Bernd Schubert
Physikalisch Chemisches Institut / Theoretische Chemie
Universität Heidelberg
INF 229
69120 Heidelberg
e-mail: bernd.schubert@pci.uni-heidelberg.de
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: a couple of oopses with 2.6.14
@ 2006-02-10 19:51 ` Bernd Schubert
0 siblings, 0 replies; 11+ messages in thread
From: Bernd Schubert @ 2006-02-10 19:51 UTC (permalink / raw)
To: Andrew Morton; +Cc: James.Bottomley, linux-kernel, linux-scsi, Jeff Garzik
On Friday 10 February 2006 20:29, Andrew Morton wrote:
> Bernd Schubert <bernd.schubert@pci.uni-heidelberg.de> wrote:
> > > Can you test 2.6.15?
> >
> > Yes, 2.6.15.3 works, no oopses.
>
> Some progress.
>
> > Only this information
> >
> > [4294743.341000] scsi0 : ata_piix
> > [4294743.514000] ATA: abnormal status 0x7F on port 0xE407
> >
> > I can't test if sata works, there's just nothing connected.
>
> Has this machine's sata support ever worked? If so, in which kernel?
> (Apologies if you've already described this).
Don't know, there was never anything connected to the sata ports. It was also
just an accident that sata was compiled statically into the kernel.
Though, with 2.6.11 we don't get the warnings:
libata version 1.10 loaded.
ata_piix version 1.03
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 18
ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 18
ata1: SATA port has no device.
scsi0 : ata_piix
ata2: SATA port has no device.
scsi1 : ata_piix
ieee1394: Initialized config rom entry `ip1394'
>
> > Btw, the printk timing information seem to be uninitalized, is this by
> > intentention or is it a bug?
>
> It's expected. We use a very raw, low-level funtion for the printk
> timestamping because we don't want to be taking locks from within printk.
> The timestamping is mainly for working out the time duration between
> printk's, rather than for absolute time.
Ah, I see.
Thanks,
Bernd
--
Bernd Schubert
Physikalisch Chemisches Institut / Theoretische Chemie
Universität Heidelberg
INF 229
69120 Heidelberg
e-mail: bernd.schubert@pci.uni-heidelberg.de
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2006-02-10 19:52 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-02-09 18:34 a couple of oopses with 2.6.14 Bernd Schubert
2006-02-09 23:27 ` Andrew Morton
2006-02-09 23:27 ` Andrew Morton
2006-02-09 23:41 ` James Bottomley
2006-02-10 0:32 ` Bernd Schubert
2006-02-10 0:32 ` Bernd Schubert
2006-02-10 18:24 ` Bernd Schubert
2006-02-10 18:24 ` Bernd Schubert
2006-02-10 19:29 ` Andrew Morton
2006-02-10 19:51 ` Bernd Schubert
2006-02-10 19:51 ` Bernd Schubert
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.