From: Aurelien Jarno <aurelien@aurel32.net>
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] qemu-system-sparc question?
Date: Wed, 11 Oct 2006 01:51:26 +0200 [thread overview]
Message-ID: <20061010235125.GA17702@bode.aurel32.net> (raw)
In-Reply-To: <Pine.LNX.4.64.0610101238590.19205@pali.cps.cmich.edu>
On Tue, Oct 10, 2006 at 12:40:53PM -0400, Ishwar Rattan wrote:
>
> Is it possible to boot the iso image
> debian-31r3-sparc-netinst.iso
>
> in qemu-system-sparc? What about other
> Linux distributions?
I haven't tried this one, but the debian-installer from Etch. It is
possible to install a full Debian using it. So my guess is that the
sarge version should also work.
Everything works correctly (I haven't tried X), but after a few hours
(with few being between around 6 and 20 hours), the esp driver from the
kernel crashes, with the following log:
esp0: Aborting command
esp0: dumping state
esp0: dma -- cond_reg<a4000211> addr<f004d000>
esp0: SW [sreg<00> sstep<04> ireg<18>]
esp0: HW reread [sreg<83> sstep<00> ireg<10>]
esp0: current command [tgt<00> lun<00> pphase<DATAOUT> cphase<DATAOUT>]
esp0: disconnected
esp0: Aborting command
esp0: dumping state
esp0: dma -- cond_reg<a4000210> addr<f004d000>
esp0: SW [sreg<00> sstep<04> ireg<18>]
esp0: HW reread [sreg<03> sstep<00> ireg<10>]
esp0: current command [tgt<00> lun<00> pphase<UNISSUED> cphase<UNISSUED>]
esp0: disconnected
esp0: Resetting scsi bus
esp0: SCSI bus reset interrupt
Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 00000054
tsk->{mm,active_mm}->pgd = fc036000
\|/ ____ \|/
"@'/ ,. \`@"
/_| \__/ |_\
\__U_/
ntpd(2981): Oops [#1]
PSR: 04401fc1 PC: fe61eb14 NPC: fe61eb18 Y: 00000000 Not tainted
PC: <esp_do_data_finale+0x374/0x3c0 [esp]>
%G: f00d3998 ffffffff 00000014 fd01a000 00000000 00000001 f1bf6000 00000001
%O: fe620c00 f021baec fd011000 00001556 00000000 f0220c88 f1bf7a78 fe61e7f4
RPC: <esp_do_data_finale+0x54/0x3c0 [esp]>
%L: f3027b60 00000000 00000000 f79cd640 00000000 00000000 f1bf6000 00000001
%I: f3049a70 f7a32380 f316b040 fe620a00 f1bf6000 f0218cc4 f1bf7ae0 fe61f4a4
Caller[fe61f4a4]: esp_work_bus+0x5c/0x6c [esp]
Caller[fe61fd04]: esp_intr+0x1dc/0x300 [esp]
Caller[f0013090]: handler_irq+0x78/0xa4
Caller[f0010b20]: patch_handler_irq+0x0/0x24
Caller[f0191474]: here+0x10/0xa0
Caller[f01919c0]: schedule_timeout+0x18/0xbc
Caller[f007c548]: do_select+0x3d0/0x43c
Caller[f007c788]: core_sys_select+0x1d4/0x288
Caller[f007cc54]: sys_select+0xc8/0x1e8
Caller[f001157c]: syscall_is_too_hard+0x34/0x40
Caller[00019c7c]: 0x19c7c
Instruction DUMP: c2242118 8400a014 c4242114 <c200a010> c2242110 c200a00c c224210c c20e203a 82086007
Kernel panic - not syncing: Aiee, killing interrupt handler!
<0>Press Stop-A (L1-A) to return to the boot prom
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' aurel32@debian.org | aurelien@aurel32.net
`- people.debian.org/~aurel32 | www.aurel32.net
next prev parent reply other threads:[~2006-10-10 23:54 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-10 16:40 [Qemu-devel] qemu-system-sparc question? Ishwar Rattan
2006-10-10 17:55 ` K. Richard Pixley
2006-10-10 18:59 ` WaxDragon
2006-10-10 19:10 ` Ishwar Rattan
2006-10-10 20:34 ` Blue Swirl
2006-10-10 20:44 ` Ishwar Rattan
2006-10-10 22:00 ` Marco Matthies
2006-10-11 2:39 ` Paul Brook
2006-10-11 12:05 ` Ishwar Rattan
2006-10-11 17:20 ` Blue Swirl
2006-10-11 17:32 ` K. Richard Pixley
2006-10-11 17:32 ` Marco Matthies
2006-10-11 18:04 ` Brian Wheeler
2006-10-11 19:28 ` Johannes Schindelin
2006-10-11 19:38 ` Blue Swirl
2006-10-11 20:02 ` K. Richard Pixley
2006-10-13 22:31 ` Paul Brook
2006-10-14 8:14 ` Blue Swirl
2006-10-14 14:11 ` Paul Brook
2006-10-10 23:51 ` Aurelien Jarno [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-10-11 21:03 Ben Taylor
2006-10-11 22:38 ` Johannes Schindelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061010235125.GA17702@bode.aurel32.net \
--to=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.