All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ingo Molnar <mingo@elte.hu>
To: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: mm-commits@vger.kernel.org, ak@suse.de, ashok.raj@intel.com,
	akpm@osdl.org, linux-kernel@vger.kernel.org
Subject: Re: [patch] genapic: default to physical mode on hotplug CPU kernels
Date: Wed, 29 Nov 2006 09:08:34 +0100	[thread overview]
Message-ID: <20061129080834.GA10199@elte.hu> (raw)
In-Reply-To: <20061129071023.GA651@elte.hu>


* Ingo Molnar <mingo@elte.hu> wrote:

> hm - indeed. Then we can indeed do the patch below. Nice simplification!

forgot to convert a few more places - full patch below.

	Ingo

----------------->
From: Ingo Molnar <mingo@elte.hu>
Subject: [patch] genapic: default to physical mode on hotplug CPU kernels

default to physical mode on hotplug CPU kernels. Furher simplify and
clean up the APIC initialization code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/i386/kernel/acpi/boot.c              |    2 +-
 arch/i386/kernel/mpparse.c                |    2 +-
 arch/x86_64/kernel/genapic.c              |   20 +++-----------------
 arch/x86_64/kernel/mpparse.c              |    2 +-
 include/asm-i386/genapic.h                |    4 ++--
 include/asm-i386/mach-bigsmp/mach_apic.h  |    2 +-
 include/asm-i386/mach-default/mach_apic.h |    2 +-
 include/asm-i386/mach-es7000/mach_apic.h  |    2 +-
 include/asm-i386/mach-generic/mach_apic.h |    2 +-
 include/asm-i386/mach-numaq/mach_apic.h   |    2 +-
 include/asm-i386/mach-summit/mach_apic.h  |    2 +-
 include/asm-i386/mach-visws/mach_apic.h   |    2 +-
 include/asm-x86_64/apic.h                 |    2 +-
 13 files changed, 16 insertions(+), 30 deletions(-)

Index: linux/arch/i386/kernel/acpi/boot.c
===================================================================
--- linux.orig/arch/i386/kernel/acpi/boot.c
+++ linux/arch/i386/kernel/acpi/boot.c
@@ -921,7 +921,7 @@ static void __init acpi_process_madt(voi
 				acpi_ioapic = 1;
 
 				smp_found_config = 1;
-				clustered_apic_check();
+				setup_apic_routing();
 			}
 		}
 		if (error == -EINVAL) {
Index: linux/arch/i386/kernel/mpparse.c
===================================================================
--- linux.orig/arch/i386/kernel/mpparse.c
+++ linux/arch/i386/kernel/mpparse.c
@@ -479,7 +479,7 @@ static int __init smp_read_mpc(struct mp
 		}
 		++mpc_record;
 	}
-	clustered_apic_check();
+	setup_apic_routing();
 	if (!num_processors)
 		printk(KERN_ERR "SMP mptable: no processors registered!\n");
 	return num_processors;
Index: linux/arch/x86_64/kernel/genapic.c
===================================================================
--- linux.orig/arch/x86_64/kernel/genapic.c
+++ linux/arch/x86_64/kernel/genapic.c
@@ -33,25 +33,11 @@ u8 x86_cpu_to_log_apicid[NR_CPUS]	= { [0
 struct genapic __read_mostly *genapic = &apic_flat;
 
 /*
- * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
+ * Choose the APIC routing mode:
  */
-void __init clustered_apic_check(void)
+void __init setup_apic_routing(void)
 {
-	unsigned int i, max_apic = 0;
-	u8 id;
-
-	/*
-	 * Determine the maximum APIC ID in use:
-	 */
-	for (i = 0; i < NR_CPUS; i++) {
-		id = bios_cpu_apicid[i];
-		if (id == BAD_APICID)
-			continue;
-		if (id > max_apic)
-			max_apic = id;
-	}
-
-	if (max_apic < 8)
+	if (cpus_weight(cpu_possible_map) <= 8)
 		genapic = &apic_flat;
 	else
 		genapic = &apic_physflat;
Index: linux/arch/x86_64/kernel/mpparse.c
===================================================================
--- linux.orig/arch/x86_64/kernel/mpparse.c
+++ linux/arch/x86_64/kernel/mpparse.c
@@ -302,7 +302,7 @@ static int __init smp_read_mpc(struct mp
 			}
 		}
 	}
-	clustered_apic_check();
+	setup_apic_routing();
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
 	return num_processors;
Index: linux/include/asm-i386/genapic.h
===================================================================
--- linux.orig/include/asm-i386/genapic.h
+++ linux/include/asm-i386/genapic.h
@@ -36,7 +36,7 @@ struct genapic { 
 	void (*init_apic_ldr)(void);
 	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
 
-	void (*clustered_apic_check)(void);
+	void (*setup_apic_routing)(void);
 	int (*multi_timer_check)(int apic, int irq);
 	int (*apicid_to_node)(int logical_apicid); 
 	int (*cpu_to_logical_apicid)(int cpu);
@@ -99,7 +99,7 @@ struct genapic { 
 	APICFUNC(check_apicid_present) \
 	APICFUNC(init_apic_ldr) \
 	APICFUNC(ioapic_phys_id_map) \
-	APICFUNC(clustered_apic_check) \
+	APICFUNC(setup_apic_routing) \
 	APICFUNC(multi_timer_check) \
 	APICFUNC(apicid_to_node) \
 	APICFUNC(cpu_to_logical_apicid) \
Index: linux/include/asm-i386/mach-bigsmp/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-bigsmp/mach_apic.h
+++ linux/include/asm-i386/mach-bigsmp/mach_apic.h
@@ -71,7 +71,7 @@ static inline void init_apic_ldr(void)
 	apic_write_around(APIC_LDR, val);
 }
 
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
 {
 	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
 		"Physflat", nr_ioapics);
Index: linux/include/asm-i386/mach-default/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-default/mach_apic.h
+++ linux/include/asm-i386/mach-default/mach_apic.h
@@ -54,7 +54,7 @@ static inline physid_mask_t ioapic_phys_
 	return phys_map;
 }
 
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
 {
 	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
 					"Flat", nr_ioapics);
Index: linux/include/asm-i386/mach-es7000/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-es7000/mach_apic.h
+++ linux/include/asm-i386/mach-es7000/mach_apic.h
@@ -81,7 +81,7 @@ static inline void enable_apic_mode(void
 }
 
 extern int apic_version [MAX_APICS];
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
 {
 	int apic = bios_cpu_apicid[smp_processor_id()];
 	printk("Enabling APIC mode:  %s.  Using %d I/O APICs, target cpus %lx\n",
Index: linux/include/asm-i386/mach-generic/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-generic/mach_apic.h
+++ linux/include/asm-i386/mach-generic/mach_apic.h
@@ -13,7 +13,7 @@
 #define apic_id_registered (genapic->apic_id_registered)
 #define init_apic_ldr (genapic->init_apic_ldr)
 #define ioapic_phys_id_map (genapic->ioapic_phys_id_map)
-#define clustered_apic_check (genapic->clustered_apic_check) 
+#define setup_apic_routing (genapic->setup_apic_routing)
 #define multi_timer_check (genapic->multi_timer_check)
 #define apicid_to_node (genapic->apicid_to_node)
 #define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid) 
Index: linux/include/asm-i386/mach-numaq/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-numaq/mach_apic.h
+++ linux/include/asm-i386/mach-numaq/mach_apic.h
@@ -34,7 +34,7 @@ static inline void init_apic_ldr(void)
 	/* Already done in NUMA-Q firmware */
 }
 
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
 {
 	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
 		"NUMA-Q", nr_ioapics);
Index: linux/include/asm-i386/mach-summit/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-summit/mach_apic.h
+++ linux/include/asm-i386/mach-summit/mach_apic.h
@@ -80,7 +80,7 @@ static inline int apic_id_registered(voi
 	return 1;
 }
 
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
 {
 	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
 						nr_ioapics);
Index: linux/include/asm-i386/mach-visws/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-visws/mach_apic.h
+++ linux/include/asm-i386/mach-visws/mach_apic.h
@@ -47,7 +47,7 @@ static inline void summit_check(char *oe
 {
 }
 
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
 {
 }
 
Index: linux/include/asm-x86_64/apic.h
===================================================================
--- linux.orig/include/asm-x86_64/apic.h
+++ linux/include/asm-x86_64/apic.h
@@ -82,7 +82,7 @@ extern void setup_secondary_APIC_clock (
 extern int APIC_init_uniprocessor (void);
 extern void disable_APIC_timer(void);
 extern void enable_APIC_timer(void);
-extern void clustered_apic_check(void);
+extern void setup_apic_routing(void);
 static inline void lapic_timer_idle_broadcast(int broadcast) { }
 
 extern void setup_APIC_extened_lvt(unsigned char lvt_off, unsigned char vector,

  reply	other threads:[~2006-11-29  8:10 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <200611140109.kAE19f5e014490@shell0.pdx.osdl.net>
     [not found] ` <20061127141849.A9978@unix-os.sc.intel.com>
     [not found]   ` <20061128063345.GA19523@elte.hu>
2006-11-28 19:14     ` [patch] genapic: always use physical delivery mode on > 8 CPUs Siddha, Suresh B
2006-11-28 20:23       ` [patch] genapic: default to physical mode on hotplug CPU kernels Ingo Molnar
2006-11-28 22:31         ` Siddha, Suresh B
2006-11-29  7:10           ` Ingo Molnar
2006-11-29  8:08             ` Ingo Molnar [this message]
2006-11-30  2:56               ` Siddha, Suresh B

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20061129080834.GA10199@elte.hu \
    --to=mingo@elte.hu \
    --cc=ak@suse.de \
    --cc=akpm@osdl.org \
    --cc=ashok.raj@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mm-commits@vger.kernel.org \
    --cc=suresh.b.siddha@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.