From: Johannes Berg <johannes@sipsolutions.net>
To: linuxppc-dev@ozlabs.org
Cc: linux-pm@lists.osdl.org
Subject: [PATCH 03/12] powerpc: dart iommu suspend
Date: Wed, 07 Feb 2007 13:45:39 +0100 [thread overview]
Message-ID: <20070207124610.972565000@sipsolutions.net> (raw)
In-Reply-To: 20070207124536.963531000@sipsolutions.net
[-- Attachment #1: dart-suspend.patch --]
[-- Type: text/plain, Size: 3480 bytes --]
This implements save and restore hooks for IOMMUs and implements
it the dart iommu.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Paul Mackeras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Olof Johansson <olof@lixom.net>
---
The quick patch I posted w/o testing of course didn't work. This one does.
--- linux-2.6-git.orig/arch/powerpc/sysdev/dart_iommu.c 2007-02-07 02:55:03.607884289 +0100
+++ linux-2.6-git/arch/powerpc/sysdev/dart_iommu.c 2007-02-07 02:55:29.073884289 +0100
@@ -54,6 +54,9 @@ static unsigned long dart_tablesize;
/* Virtual base address of the DART table */
static u32 *dart_vbase;
+#ifdef CONFIG_PM
+static u32 *dart_copy;
+#endif
/* Mapped base address for the dart */
static unsigned int __iomem *dart;
@@ -346,6 +349,49 @@ void iommu_init_early_dart(void)
pci_dma_ops = &dma_direct_ops;
}
+#ifdef CONFIG_PM
+static void iommu_dart_save(void)
+{
+ memcpy(dart_copy, dart_vbase, 2*1024*1024);
+}
+
+static void iommu_dart_restore(void)
+{
+ memcpy(dart_vbase, dart_copy, 2*1024*1024);
+ dart_tlb_invalidate_all();
+}
+
+static int iommu_init_late_dart(void)
+{
+ unsigned long i, tbase = (unsigned long) dart_tablebase;
+ struct page *p;
+
+ /* this 16MB area is left unmapped because of caching
+ * considerations. that happens early so we can't mark
+ * it there, do it now instead */
+ for (i = 0; i < (1<<24); i+= PAGE_SIZE)
+ SetPageNosave(virt_to_page((void*)(tbase + i)));
+
+ /* if no dart table exists then we don't need to save it */
+ if (!dart_tablebase)
+ return 0;
+
+ /* For suspend we need to copy the dart contents because
+ * it is not part of the regular mapping (see above) and
+ * thus not saved automatically. The memory for this copy
+ * must be allocated early because we need 2 MB. */
+ p = alloc_pages(GFP_KERNEL, 21 - PAGE_SHIFT);
+ BUG_ON(!p);
+ dart_copy = page_address(p);
+
+ ppc_md.iommu_save = iommu_dart_save;
+ ppc_md.iommu_restore = iommu_dart_restore;
+
+ return 0;
+}
+
+late_initcall(iommu_init_late_dart);
+#endif
void __init alloc_dart_table(void)
{
--- linux-2.6-git.orig/include/asm-powerpc/iommu.h 2007-02-07 02:55:03.635884289 +0100
+++ linux-2.6-git/include/asm-powerpc/iommu.h 2007-02-07 02:55:29.099884289 +0100
@@ -26,6 +26,7 @@
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <asm/machdep.h>
#include <asm/types.h>
#include <asm/bitops.h>
@@ -108,6 +109,19 @@ static inline void pci_iommu_init(void)
#endif
extern void alloc_dart_table(void);
+#if defined(CONFIG_PPC64) && defined(CONFIG_PM)
+static inline void iommu_save(void)
+{
+ if (ppc_md.iommu_save)
+ ppc_md.iommu_save();
+}
+
+static inline void iommu_restore(void)
+{
+ if (ppc_md.iommu_restore)
+ ppc_md.iommu_restore();
+}
+#endif
#endif /* __KERNEL__ */
#endif /* _ASM_IOMMU_H */
--- linux-2.6-git.orig/include/asm-powerpc/machdep.h 2007-02-07 02:55:03.698884289 +0100
+++ linux-2.6-git/include/asm-powerpc/machdep.h 2007-02-07 02:55:29.108884289 +0100
@@ -91,6 +91,11 @@ struct machdep_calls {
void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size,
unsigned long flags);
void (*iounmap)(volatile void __iomem *token);
+
+#ifdef CONFIG_PM
+ void (*iommu_save)(void);
+ void (*iommu_restore)(void);
+#endif
#endif /* CONFIG_PPC64 */
int (*probe)(void);
--
WARNING: multiple messages have this Message-ID (diff)
From: Johannes Berg <johannes@sipsolutions.net>
To: linuxppc-dev@ozlabs.org
Cc: Olof Johansson <olof@lixom.net>, Paul Mackeras <paulus@samba.org>,
linux-pm@lists.osdl.org
Subject: [PATCH 03/12] powerpc: dart iommu suspend
Date: Wed, 07 Feb 2007 13:45:39 +0100 [thread overview]
Message-ID: <20070207124610.972565000@sipsolutions.net> (raw)
In-Reply-To: 20070207124536.963531000@sipsolutions.net
This implements save and restore hooks for IOMMUs and implements
it the dart iommu.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Paul Mackeras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Olof Johansson <olof@lixom.net>
---
The quick patch I posted w/o testing of course didn't work. This one does.
--- linux-2.6-git.orig/arch/powerpc/sysdev/dart_iommu.c 2007-02-07 02:55:03.607884289 +0100
+++ linux-2.6-git/arch/powerpc/sysdev/dart_iommu.c 2007-02-07 02:55:29.073884289 +0100
@@ -54,6 +54,9 @@ static unsigned long dart_tablesize;
/* Virtual base address of the DART table */
static u32 *dart_vbase;
+#ifdef CONFIG_PM
+static u32 *dart_copy;
+#endif
/* Mapped base address for the dart */
static unsigned int __iomem *dart;
@@ -346,6 +349,49 @@ void iommu_init_early_dart(void)
pci_dma_ops = &dma_direct_ops;
}
+#ifdef CONFIG_PM
+static void iommu_dart_save(void)
+{
+ memcpy(dart_copy, dart_vbase, 2*1024*1024);
+}
+
+static void iommu_dart_restore(void)
+{
+ memcpy(dart_vbase, dart_copy, 2*1024*1024);
+ dart_tlb_invalidate_all();
+}
+
+static int iommu_init_late_dart(void)
+{
+ unsigned long i, tbase = (unsigned long) dart_tablebase;
+ struct page *p;
+
+ /* this 16MB area is left unmapped because of caching
+ * considerations. that happens early so we can't mark
+ * it there, do it now instead */
+ for (i = 0; i < (1<<24); i+= PAGE_SIZE)
+ SetPageNosave(virt_to_page((void*)(tbase + i)));
+
+ /* if no dart table exists then we don't need to save it */
+ if (!dart_tablebase)
+ return 0;
+
+ /* For suspend we need to copy the dart contents because
+ * it is not part of the regular mapping (see above) and
+ * thus not saved automatically. The memory for this copy
+ * must be allocated early because we need 2 MB. */
+ p = alloc_pages(GFP_KERNEL, 21 - PAGE_SHIFT);
+ BUG_ON(!p);
+ dart_copy = page_address(p);
+
+ ppc_md.iommu_save = iommu_dart_save;
+ ppc_md.iommu_restore = iommu_dart_restore;
+
+ return 0;
+}
+
+late_initcall(iommu_init_late_dart);
+#endif
void __init alloc_dart_table(void)
{
--- linux-2.6-git.orig/include/asm-powerpc/iommu.h 2007-02-07 02:55:03.635884289 +0100
+++ linux-2.6-git/include/asm-powerpc/iommu.h 2007-02-07 02:55:29.099884289 +0100
@@ -26,6 +26,7 @@
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <asm/machdep.h>
#include <asm/types.h>
#include <asm/bitops.h>
@@ -108,6 +109,19 @@ static inline void pci_iommu_init(void)
#endif
extern void alloc_dart_table(void);
+#if defined(CONFIG_PPC64) && defined(CONFIG_PM)
+static inline void iommu_save(void)
+{
+ if (ppc_md.iommu_save)
+ ppc_md.iommu_save();
+}
+
+static inline void iommu_restore(void)
+{
+ if (ppc_md.iommu_restore)
+ ppc_md.iommu_restore();
+}
+#endif
#endif /* __KERNEL__ */
#endif /* _ASM_IOMMU_H */
--- linux-2.6-git.orig/include/asm-powerpc/machdep.h 2007-02-07 02:55:03.698884289 +0100
+++ linux-2.6-git/include/asm-powerpc/machdep.h 2007-02-07 02:55:29.108884289 +0100
@@ -91,6 +91,11 @@ struct machdep_calls {
void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size,
unsigned long flags);
void (*iounmap)(volatile void __iomem *token);
+
+#ifdef CONFIG_PM
+ void (*iommu_save)(void);
+ void (*iommu_restore)(void);
+#endif
#endif /* CONFIG_PPC64 */
int (*probe)(void);
--
next prev parent reply other threads:[~2007-02-07 12:45 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-07 12:45 [PATCH 00/12] powerpc/powermac power management patches Johannes Berg
2007-02-07 12:45 ` [PATCH 01/12] powerpc: MPIC sys_device & suspend/resume Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-07 12:45 ` [PATCH 02/12] powermac: support G5 CPU hotplug Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-08 13:14 ` Johannes Berg
2007-02-08 13:14 ` Johannes Berg
2007-02-08 13:28 ` Johannes Berg
2007-02-08 15:38 ` Johannes Berg
2007-02-08 15:38 ` Johannes Berg
2007-02-08 21:59 ` Paul Mackerras
2007-02-08 21:59 ` [linux-pm] " Paul Mackerras
2007-02-08 22:33 ` Benjamin Herrenschmidt
2007-02-08 22:33 ` [linux-pm] " Benjamin Herrenschmidt
2007-02-09 15:39 ` Johannes Berg
2007-02-09 15:39 ` [linux-pm] " Johannes Berg
2007-02-08 22:24 ` Benjamin Herrenschmidt
2007-02-08 22:24 ` Benjamin Herrenschmidt
2007-02-09 15:36 ` Johannes Berg
2007-02-09 15:36 ` Johannes Berg
2007-02-12 15:15 ` Johannes Berg
2007-02-15 3:44 ` Paul Mackerras
2007-02-15 15:08 ` Johannes Berg
2007-02-15 15:08 ` Johannes Berg
2007-02-15 19:43 ` Johannes Berg
2007-02-14 14:45 ` Pavel Machek
2007-02-14 14:45 ` [linux-pm] " Pavel Machek
2007-02-14 19:11 ` Johannes Berg
2007-02-14 19:11 ` [linux-pm] " Johannes Berg
2007-02-14 21:27 ` Benjamin Herrenschmidt
2007-02-14 21:27 ` [linux-pm] " Benjamin Herrenschmidt
2007-02-07 12:45 ` Johannes Berg [this message]
2007-02-07 12:45 ` [PATCH 03/12] powerpc: dart iommu suspend Johannes Berg
2007-02-07 12:45 ` [PATCH 04/12] powerpc: mark pages that dont exist as Nosave Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-07 12:45 ` [PATCH 05/12] power management: no valid states w/o pm_ops + docs Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-13 12:12 ` Pavel Machek
2007-02-13 12:12 ` Pavel Machek
2007-02-13 16:08 ` Johannes Berg
2007-02-13 16:08 ` Johannes Berg
2007-02-13 16:14 ` Pavel Machek
2007-02-13 16:14 ` Pavel Machek
2007-02-07 12:45 ` [PATCH 06/12] powerpc: fix suspend states again Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-07 12:45 ` [PATCH 07/12] powermac: suspend to disk on G5 Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-07 12:45 ` [PATCH 08/12] powermac: fix G5-cpufreq for cpu on/offline Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-07 12:45 ` [PATCH 09/12] powerpc: remove bogus comment about page_is_ram Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-07 12:45 ` [PATCH 10/12] powerpc: remove unneeded exports in mem.c Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-08 4:25 ` Paul Mackerras
2007-02-08 13:10 ` Johannes Berg
2007-02-08 13:10 ` Johannes Berg
2007-02-08 13:27 ` [PATCH 10/12] powerpc: remove unneeded page_is_ram export Johannes Berg
2007-02-07 12:45 ` [PATCH 11/12] powermac: disallow pmu sleep notifiers from aborting sleep Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-07 22:52 ` Andreas Schwab
2007-02-08 13:08 ` Johannes Berg
2007-02-08 13:08 ` Johannes Berg
2007-02-08 13:16 ` Johannes Berg
2007-02-08 13:16 ` Johannes Berg
2007-02-07 12:45 ` [PATCH 12/12] powermac: proper sleep management Johannes Berg
2007-02-07 12:45 ` Johannes Berg
2007-02-08 13:16 ` [PATCH 13/12] mpic: add affinity callback for IPI "chip" Johannes Berg
2007-02-08 21:14 ` Benjamin Herrenschmidt
2007-02-09 15:41 ` Johannes Berg
2007-02-09 15:41 ` Johannes Berg
2007-02-12 15:20 ` [PATCH 13/12] mpic: set IPIs to be per-CPU Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070207124610.972565000@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=linux-pm@lists.osdl.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.