From: Michael Ellerman <michael@ellerman.id.au>
To: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Subject: [PATCH 6/7] MPIC MSI allocator
Date: Tue, 08 May 2007 12:58:36 +1000 [thread overview]
Message-ID: <20070508025842.52107DDF01@ozlabs.org> (raw)
In-Reply-To: <1178593113.675058.404575641543.qpush@cradle>
To support MSI on MPIC we need a way to reserve and allocate hardware irq
numbers, this patch implements an allocator for that purpose.
New firmware platforms must define a "msi-available-ranges" property on their
MPIC node for MSI to work. For U3/U4 we do a best-guess setup.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
---
arch/powerpc/sysdev/Makefile | 4
arch/powerpc/sysdev/mpic.c | 4
arch/powerpc/sysdev/mpic.h | 27 ++++++
arch/powerpc/sysdev/mpic_msi.c | 183 +++++++++++++++++++++++++++++++++++++++++
include/asm-powerpc/mpic.h | 5 +
5 files changed, 222 insertions(+), 1 deletion(-)
Index: msi-new/arch/powerpc/sysdev/Makefile
===================================================================
--- msi-new.orig/arch/powerpc/sysdev/Makefile
+++ msi-new/arch/powerpc/sysdev/Makefile
@@ -2,7 +2,9 @@ ifeq ($(CONFIG_PPC64),y)
EXTRA_CFLAGS += -mno-minimal-toc
endif
-obj-$(CONFIG_MPIC) += mpic.o
+mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o
+obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y)
+
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_PPC_DCR) += dcr.o
Index: msi-new/arch/powerpc/sysdev/mpic.c
===================================================================
--- msi-new.orig/arch/powerpc/sysdev/mpic.c
+++ msi-new/arch/powerpc/sysdev/mpic.c
@@ -36,6 +36,8 @@
#include <asm/mpic.h>
#include <asm/smp.h>
+#include "mpic.h"
+
#ifdef DEBUG
#define DBG(fmt...) printk(fmt)
#else
@@ -879,6 +881,8 @@ static int mpic_host_map(struct irq_host
if (hw >= mpic->irq_count)
return -EINVAL;
+ mpic_msi_reserve_hwirq(mpic, hw);
+
/* Default chip */
chip = &mpic->hc_irq;
Index: msi-new/arch/powerpc/sysdev/mpic.h
===================================================================
--- /dev/null
+++ msi-new/arch/powerpc/sysdev/mpic.h
@@ -0,0 +1,27 @@
+#ifndef _POWERPC_SYSDEV_MPIC_H
+#define _POWERPC_SYSDEV_MPIC_H
+
+/*
+ * Copyright 2006-2007, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#ifdef CONFIG_PCI_MSI
+extern void mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq);
+extern int mpic_msi_init_allocator(struct mpic *mpic);
+extern irq_hw_number_t mpic_msi_alloc_hwirqs(struct mpic *mpic, int num);
+extern void mpic_msi_free_hwirqs(struct mpic *mpic, int offset, int num);
+#else
+static inline void mpic_msi_reserve_hwirq(struct mpic *mpic,
+ irq_hw_number_t hwirq)
+{
+ return;
+}
+#endif
+
+#endif /* _POWERPC_SYSDEV_MPIC_H */
Index: msi-new/arch/powerpc/sysdev/mpic_msi.c
===================================================================
--- /dev/null
+++ msi-new/arch/powerpc/sysdev/mpic_msi.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright 2006-2007, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/bitmap.h>
+#include <linux/msi.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+
+
+static void __mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq)
+{
+ pr_debug("mpic: reserving hwirq 0x%lx\n", hwirq);
+ bitmap_allocate_region(mpic->hwirq_bitmap, hwirq, 0);
+}
+
+void mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq)
+{
+ unsigned long flags;
+
+ /* The mpic calls this even when there is no allocator setup */
+ if (!mpic->hwirq_bitmap)
+ return;
+
+ spin_lock_irqsave(&mpic->bitmap_lock, flags);
+ __mpic_msi_reserve_hwirq(mpic, hwirq);
+ spin_unlock_irqrestore(&mpic->bitmap_lock, flags);
+}
+
+irq_hw_number_t mpic_msi_alloc_hwirqs(struct mpic *mpic, int num)
+{
+ unsigned long flags;
+ int offset, order = get_count_order(num);
+
+ spin_lock_irqsave(&mpic->bitmap_lock, flags);
+ /*
+ * This is fast, but stricter than we need. We might want to add
+ * a fallback routine which does a linear search with no alignment.
+ */
+ offset = bitmap_find_free_region(mpic->hwirq_bitmap, mpic->irq_count,
+ order);
+ spin_unlock_irqrestore(&mpic->bitmap_lock, flags);
+
+ pr_debug("mpic: allocated 0x%x (2^%d) at offset 0x%x\n",
+ num, order, offset);
+
+ return offset;
+}
+
+void mpic_msi_free_hwirqs(struct mpic *mpic, int offset, int num)
+{
+ unsigned long flags;
+ int order = get_count_order(num);
+
+ pr_debug("mpic: freeing 0x%x (2^%d) at offset 0x%x\n",
+ num, order, offset);
+
+ spin_lock_irqsave(&mpic->bitmap_lock, flags);
+ bitmap_release_region(mpic->hwirq_bitmap, offset, order);
+ spin_unlock_irqrestore(&mpic->bitmap_lock, flags);
+}
+
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
+{
+ irq_hw_number_t hwirq;
+ struct irq_host_ops *ops = mpic->irqhost->ops;
+ struct device_node *np;
+ int flags, index, i;
+ struct of_irq oirq;
+
+ pr_debug("mpic: found U3, guessing msi allocator setup\n");
+
+ /* Reserve source numbers we know are reserved in the HW */
+ for (i = 0; i < 8; i++)
+ __mpic_msi_reserve_hwirq(mpic, i);
+
+ for (i = 42; i < 46; i++)
+ __mpic_msi_reserve_hwirq(mpic, i);
+
+ for (i = 100; i < 105; i++)
+ __mpic_msi_reserve_hwirq(mpic, i);
+
+ np = NULL;
+ while ((np = of_find_all_nodes(np))) {
+ pr_debug("mpic: mapping hwirqs for %s\n", np->full_name);
+
+ index = 0;
+ while (of_irq_map_one(np, index++, &oirq) == 0) {
+ ops->xlate(mpic->irqhost, NULL, oirq.specifier,
+ oirq.size, &hwirq, &flags);
+ __mpic_msi_reserve_hwirq(mpic, hwirq);
+ }
+ }
+
+ return 0;
+}
+#else
+static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
+{
+ return -1;
+}
+#endif
+
+static int mpic_msi_reserve_dt_hwirqs(struct mpic *mpic)
+{
+ int i, len;
+ const u32 *p;
+
+ p = of_get_property(mpic->of_node, "msi-available-ranges", &len);
+ if (!p) {
+ pr_debug("mpic: no msi-available-ranges property found on %s\n",
+ mpic->of_node->full_name);
+ return -ENODEV;
+ }
+
+ if (len % 8 != 0) {
+ printk(KERN_WARNING "mpic: Malformed msi-available-ranges "
+ "property on %s\n", mpic->of_node->full_name);
+ return -EINVAL;
+ }
+
+ bitmap_allocate_region(mpic->hwirq_bitmap, 0,
+ get_count_order(mpic->irq_count));
+
+ /* Format is: (<u32 start> <u32 count>)+ */
+ len /= sizeof(u32);
+ for (i = 0; i < len / 2; i++, p += 2)
+ mpic_msi_free_hwirqs(mpic, *p, *(p + 1));
+
+ return 0;
+}
+
+int mpic_msi_init_allocator(struct mpic *mpic)
+{
+ int rc, size;
+
+ BUG_ON(mpic->hwirq_bitmap);
+ spin_lock_init(&mpic->bitmap_lock);
+
+ size = BITS_TO_LONGS(mpic->irq_count) * sizeof(long);
+ pr_debug("mpic: allocator bitmap size is 0x%x bytes\n", size);
+
+ if (mem_init_done)
+ mpic->hwirq_bitmap = kmalloc(size, GFP_KERNEL);
+ else
+ mpic->hwirq_bitmap = alloc_bootmem(size);
+
+ if (!mpic->hwirq_bitmap) {
+ pr_debug("mpic: ENOMEM allocating allocator bitmap!\n");
+ return -ENOMEM;
+ }
+
+ memset(mpic->hwirq_bitmap, 0, size);
+
+ rc = mpic_msi_reserve_dt_hwirqs(mpic);
+ if (rc) {
+ if (mpic->flags & MPIC_U3_HT_IRQS)
+ rc = mpic_msi_reserve_u3_hwirqs(mpic);
+
+ if (rc)
+ goto out_free;
+ }
+
+ return 0;
+
+ out_free:
+ if (mem_init_done)
+ kfree(mpic->hwirq_bitmap);
+
+ mpic->hwirq_bitmap = NULL;
+ return rc;
+}
Index: msi-new/include/asm-powerpc/mpic.h
===================================================================
--- msi-new.orig/include/asm-powerpc/mpic.h
+++ msi-new/include/asm-powerpc/mpic.h
@@ -292,6 +292,11 @@ struct mpic
u32 *hw_set;
#endif
+#ifdef CONFIG_PCI_MSI
+ spinlock_t bitmap_lock;
+ unsigned long *hwirq_bitmap;
+#endif
+
/* link */
struct mpic *next;
};
next prev parent reply other threads:[~2007-05-08 2:58 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-08 2:58 [PATCH 1/7] Rip out the existing powerpc msi stubs Michael Ellerman
2007-05-08 2:58 ` [PATCH 2/7] Powerpc MSI infrastructure Michael Ellerman
2007-05-08 2:58 ` [PATCH 4/7] Tell Phyp we support MSI Michael Ellerman
2007-05-08 2:58 ` [PATCH 3/7] RTAS MSI implementation Michael Ellerman
2007-05-08 2:58 ` Michael Ellerman [this message]
2007-05-08 2:58 ` [PATCH 5/7] Enable MSI mappings for MPIC Michael Ellerman
2007-05-08 2:58 ` [PATCH 7/7] MPIC U3/U4 MSI backend Michael Ellerman
2007-05-08 8:55 ` Johannes Berg
2007-05-08 9:04 ` Johannes Berg
2007-05-08 23:43 ` Benjamin Herrenschmidt
2007-05-12 8:28 ` Johannes Berg
2007-05-12 9:06 ` Benjamin Herrenschmidt
-- strict thread matches above, loose matches on Subject: below --
2007-04-19 7:35 [PATCH 1/7] Rip out the existing powerpc msi stubs Michael Ellerman
2007-04-19 7:35 ` [PATCH 6/7] MPIC MSI allocator Michael Ellerman
2007-04-21 23:17 ` Milton Miller
2007-04-23 4:04 ` Michael Ellerman
2007-04-23 6:20 ` Milton Miller
2007-04-23 3:50 ` Olof Johansson
2007-04-23 3:53 ` Michael Ellerman
2007-04-24 1:29 ` Benjamin Herrenschmidt
2007-04-24 9:26 ` Segher Boessenkool
2007-04-24 9:39 ` Benjamin Herrenschmidt
2007-04-24 9:44 ` Segher Boessenkool
2007-04-24 9:51 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070508025842.52107DDF01@ozlabs.org \
--to=michael@ellerman.id.au \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.